Chaning Specs from my existing MacBook Pro
Hey, right now I got a 15-inch MacBook Pro with Intel 2GHz Dual-Core Processors, so I'm pretty sure this laptop is in the second generation of MacBook Pro. Anyways, recently I noticed that the new MBPs (MacBook Pro) are equipped with the Nividia GeForce 8800 VGA card, which is something I am really interesting on. Also, I also wanted to replace my existing hard disk for a 250GB size. I know probably you people reading this might think I should just buy a new MBP, but this laptop was my birthday present from my dad..so yes..this laptop is very precious to me. So the question is, are these replacement possible?? also, about how much will these replacement cost?? Any answers and help will be greatly appreciated. Thanks!!
Welcome to Apple Discussions!
The graphics card is really just a chip on the logicboard. Unfortunately you'd have to spend the cost of an entire logicboard, which is nearly the cost of the new machine itself as has been noticed by people who are out of warranty needing a logicboard replacement. The hard drive though can be replaced easily by any authorized service center. Just get a 2.5" SATA Western Digital or Seagate internal drive. Note replacing the drive may change the warranty status of the machine if it is still under warranty. I'd call AppleCare if you are still under warranty to make sure it does not.
External Firewire drives up to 1 TB exist and Express/34 SATA II cards are even faster than the internal drives for external 1 TB drives.
Similar Messages
-
I'm buying a new Macbook Pro this week and am wondering what is the best way to copy over the software I have from my existing Macbook Pro to the new one? eg. Photoshop and Office etc. I no longer have the CDs.
Ya know what I'm on a brand new MBP just about 24 hours old and you know whats been working amazingly for me. I have a 27inch iMac as well and i've just connected it to my network and been dragging files and apps across the network onto my new MBP. Its really working fast and its flawless. You could always do that option, Just go into sharing options and turn them on for both Macs. Then just click and drag. Of course they have to both be on the same network for this to be possible.
Look at my network.
Shared is what your looking at. I click on there see all my computers files and then drag the ones i want form its folder to my MBP folders. Hope that helps if your looking for a very simple way on a wireless network. -
How can I export slideshows created in Aperture v3.3.2 from Mid-2009 MacBook Pro-17 to blank DVDs?
(Fifth futile attempt in two hours, before I learned there was a Post webpage – I’m new to ApSuppCom - and after I learned that I am not allowed to update previous content, so I had to back out, make a few changes, and start over.) How can I export slideshows created in Aperture v3.3.2 (complete with superimposed captions and music tracks) from Mid-2009 MacBook Pro-17 to blank DVDs ? (Some other specs: Mac OS Lion 10.7.5; Capacity 499.5 GB; Processor 2.8 GHz Intel Core 2 Duo; Memory 4GB 1067 MHz DDR3; Graphics NVIDIA GeForce 9400M 256MB)
I cannot do a copy (export) without various error messages appearing and the inevitable stoppage occurring. Always with the DVD Video Player final message reading, “Supported disc not available.” Advisors and Mac Geniuses at local Apple Stores have told me to try Roxio Toast. When I visited the Roxio website, and found numerous other company products, the descriptions all seemed to suggest that most of the apps shown can easily export videos to DVDs, but nothing was said about finished digital slide shows being exported. At future events soon, I hope to be handing out these finished DVDs (free) to the people in them. Any help will be greatly appreciated. A.Z.How can I export slideshows created in Aperture v3.3.2 (complete with superimposed captions and music tracks) from Mid-2009 MacBook Pro-17 to blank DVDs ?
Aperture cannot burn slideshows to a DVD. It only can export a video of your slideshow.
In Aperture 3 you use the "Export" button in Aperture's slideshow project to render a video to a folder on your disk.
Then you use iDVD or another program to burn a video DVD.
I cannot do a copy (export) without various error messages appearing and the inevitable stoppage occurring. Always with the DVD Video Player final message reading, “Supported disc not available.”
Could you please describe the exact steps that are causing these error messages?
How are you exporting your slideshow from Aperture? Which settings are you using? And how are you importing the video to iDVD or Toast to burn a video DVD?
For more suggestions see Karsten Schlüter's user tip: How to create a video-DVD? (Macs without iDVD) -
If I buy a new MacBook Air will the Apple Store help me transfer everything from my old MacBook Pro?
Will Apple help to copy over all the settings, apps, programs, files, etc. from an old MacBook Pro 15" on OS X 10.6.8 to a new MacBook Air 15"? Will it work easily and painlessly? Will they help me set it back to factory once everything is copied so that it can be sold or given to someone else? Will they charge for this?
I want to get the new MacBook Air 13".
The current 15" 2.53 GHz MacBook Pro Mid 2009 has the following specs and OS:
Mac OS X version 10.6.8
Model Identifier: MacBookPro5,4
Processor Name: Intel Core 2 Duo
Processor Speed: 2.53 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP53.00AC.B03
SMC Version (system): 1.49f2
Serial Number (system):
Hardware UUID:
Sudden Motion Sensor: Enabled
According to Apple's serial number identifier it's this: https://support.apple.com/kb/SP544
Thanks.You sure about this? https://www.apple.com/why-mac/better-support/
"Purchase a One to One membership at the same time you get your new Mac from an Apple Retail Store, and you won’t have to spend hours transferring all your stuff. Just bring in your old PC, and we’ll do it for you. A Specialist will move all your files — email, contacts, music, photos, documents, calendar, desktop items — and make sure everything is exactly where it should be. One to One costs just $99, and it includes a year’s worth of one-hour, face-to-face training sessions. It’s like getting a head start before you start."
This is really disappointing. Buy a $3,000 computer from them and then buy another one for $1,000+ and all they want to do is screw you over, nickle and dime you and price gouge you on setting it up. -
HT204144 File transfer using Airdrop from iphone to Macbook Pro
File transfer using airdrop form Macbook Pro to iphone is working...but from iphone to Macbook Pro is not working, Why?
Hi Brok25;
Thanks for the question. The resource below explains the specs and settings that are needed for AirDrop. Check the settings and look to see if your MacBook Pro is listed.
Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support
http://support.apple.com/en-us/HT203106
Sending files to and from an older Mac
If a Mac you're using with AirDrop was manufactured before 2012, you can send and receive files with other Mac computers.
On the sending Mac, click "Don't see who you're looking for" in the AirDrop window.
Select the option to "Search for an Older Mac."
On the receiving Mac, open a new Finder window and click AirDrop in the sidebar.
Tips for sending files
Make sure Wi-Fi and Bluetooth are enabled on your Mac and your iOS device. Although you don't have to connect to a specific network, Wi-Fi needs to be on to send and receive files using AirDrop.
Move your devices closer together. AirDrop is designed to work within a range of approximately 30 feet (9 meters). If you need to send a file to someone farther away, consider using File Sharing, iCloud, or email instead.
If you're using a firewall on your Mac, you won't be able to receive AirDrop files if you have enabled "Block all incoming connections" in the Security & Privacy pane of System Preferences.
Make sure your devices meet system requirements for AirDrop.
System Requirements
To see if your Mac works with AirDrop, make sure you’re in the Finder by clicking the desktop (the background area of your screen), or by clicking the Finder icon in the Dock. Then, check to see if AirDrop is listed as an option in the Go menu. If you don't see AirDrop listed, your Mac doesn't support this feature.
In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
your iOS device needs to include a lightning connector
your iOS device needs iOS 7 or later installed
your Mac needs to be a 2012 or later model with OS X Yosemite installed
Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network.
To transfer files between two Mac computers, you need the Mac models listed below with Wi-Fi turned on and OS X Lion or later installed.
MacBook Pro (Late 2008 or newer)*
MacBook Air (Late 2010 or newer)
MacBook (Late 2008 or newer)*
iMac (Early 2009 or newer)
Mac Mini (Mid 2010 or newer)
Mac Pro (Early 2009 with AirPort Extreme card, or Mid 2010)
*The MacBook Pro (17-Inch Late 2008) and the white MacBook (Late 2008) do not support AirDrop.
For help identifying your Mac, choose About This Mac from the Apple menu. You can refer to the Apple Support website to find out if your iPhone, iPad or iPod Touch includes a lightning connector.
Cheers,
- Judy -
How do I install windows from USB on Macbook pro 3,1
How do I install windows from USB on Macbook pro 3,1 ?
My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
- My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
After rEFIt I booted and then I got this error:
Starting bootmgr.efi
Error: Unsupported while loading bootmgr.efi
I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
Point: Nothing is wrong with the windows software, and windows runs fine.
I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
rEFIt - Booting Legacy OS
Starting legacy loader
Using load option ´USB´
Error: Not found returned from legacy loader
Error: Not found from LocateDevicePath
(x 9 times)
Error: Load Error while (re)opening our installation volume
The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
(Hey Apple please send out a updated firmware that fix this issue?!)
So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ? Or just run windows on the mac and forget about mac software ? What a stupid solution...There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
This is 5 page thread, so a little more 'meat' to it:
https://discussions.apple.com/thread/3410900?start=60&tstart=0
And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
What you have here seems to be everything and everyone is excluded unless there is a mac-model device ID string that specifies yes. An unnecessary hurdle. -
How do I transfer files from my old MacBook Pro to my New MacBook Pro?
I am trying to transfer some files, not all, from my old MacBook Pro to my new MacBook Pro. I have tried to use Migration Assistant, but it doesn't let me choose what I want to transfer (only generic things like "users" and "files and folders"). I have tried to use Firewire. Now here is the funny thing. When I put my old mac in target mode it doesn't appear on my new mac anywhere. But, when I put my new mac in target mode, it pops right up on the dashboard and in finder. The problem is I have tried using my new mac as the target and just place the files into the icon, but the don't stay after I eject. I get a prompt that says downloading and when all files and apps are transferred I turn off my new mac then turn it back on and nothing. I've done search after search and repeated this process 3 times and nothing. Am I doing something wrong? Please help.
Time Machine will not "overwrite". New back ups are added to what is there, without erasing.
Connect the Time Machine back up, double click on the icon and navigate through its contents - the back ups are chronological, so you just select the date then go through the contents just like on any other drive. You can select any files you want and drag and drop on the new Mac's desktop (or anywhere else). -
I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?
It's almost impossible. The new iMacs have a Target Display Mode, but it's built to do that. Without ripping your screen out, finding an acceptable power supply, frame, and whatever electronics to convert a Thunderbolt signal to the screen, the cost will be much larger than buying a cheaper HiDef monitor that runs with an HDMI to Thunderbolt cable to your MacBook 15. In fact, you can sell your 17" MBP for a lot of money, unless it's broken or something, buying you a really sweet monitor.
By the way, I found your answer by searching this forum. I would suggest using the search function here in the futuere. -
Trapped at transferring data from my old macbook pro to iMac
I got a new iMac yesterday and was trying to transfer data from my old macbook pro to iMac through time machine...
However, I encountered HUGE problems....
Background info: I set up a new account before I transffered my data.
Here is what I did:
I used migration assistance to transfer data. I chose to transfer everything listed on migration assistance from time machine to my new iMac.
After this process was completed, I switched to the transferred account from my newly-set account. Then I realized all the old stuf, (including the software problems + old apps such as microsoft 2008, had been transferred to my new iMac. what I really wanted were all the documents, pictures and music! Therefore I decided to delete this account....
Question 1:
1) I deleted the transferred account, then there was a windown came up asking me if i wanted to keep the home folder, I chose no. then mac started cleaning up and BACKING UP. Since I already had a copy of everything, I stopped the backup process....then this transferred account was deleted. However, everything was still on my mac that I don't have access to (at least I don't know how...) when I checked my mac stroage!
Could anyone tell me how to delete all the files I transferred from time machine to my new iMac?
Question 2:
2) how can i only transfer documents+pictures+music from my old macbook pro to new iMac through time machine without creating a new account? I want all the files to be directly transferred to my newly-set account...
LSS:
Question 1
I tried to transfer everthing from my old macbook pro to new iMac but i realized there were something I didn't want that had been transferred as well. Therefore I deleted this transferred account. However, all the files are still in my mac even if I have deleted that account. Could anyone tell me how I can access to those content and delete them?
Question 2
I just want the documents, music and pictures (from iPhone library) to be directly transferred to the newly-set account on my iMac through time machine (instead to transferred the whole old account to my imac) How can I do it??
THANK YOU FOR YOUR PATIENCE OF GOING THROUGH THIS MESSAGE. I WOULD REALLY APPRECIATE IF YOU COULD GIVE ME A HAND.
btw, you can totally see that i'm not a computer person at all....:( thanks for your help!!I suggest starting over. Boot into Recovery mode, wipe the HD, reinstall the OS, and, on first boot, use the steps in Pondini's Setup New Mac guide to do the migration.'
-
How can I transfer my email accounts and emails from my old macbook pro with ML to my new macbook pro with ML
Do you have your system backed up to Time Machine? If so, you can open your user Library and copy your Mail folder from Time Machine to your Desktop on your new machine; then copy THAT folder to your new machine's user Library.
To get to your user Library, open Finder and Go and press the Option key. Library will show up. Click on it to get into your user Library. Now go into Time Machine and you should see your user Library for Time Machine. Restore the Mail folder to your Desktop. -
How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant? The files show up on the new MacBook but cannot be opened. Thanks!
Get info then check permissions then add your curent user name (it was probably different on old Mac) and give your username full read/write permissions.
-
I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one? Also, the software is not updated as the computer hasn't worked for about 2 months.
Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well? It is not saved in the cloud.
Thanks for your help, it is much appreciated.You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
But it would be a mistake to simply put the old HD in the new computer.
These are the steps:
Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
Put it in a cheap enclosure
Connect it the new computer
Boot up new computer.
If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
Obviously chose the second option (another HD connected to this Mac) and follow prompts.
If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
Message was edited by: Mike Boreham...added sec on line -
How to migrate from my old MacBook Pro to a new one with less disk space and an external hard drive?
I have just bought a new MacBook Pro and an external hard drive.
Yet I have problems migrating data from my old MacBook Pro (more internal disk space with around 500 GB data) to my new one (internal disk space less than 500 GB).
I have connected all 3 devices but it seems the Migration Assistant does not have an option for us to select to migrate to an external hard drive.
Any other way to do it?
Kindly help me. Thanks.For your situation, Target disk mode may be the most efficient method:
http://support.apple.com/kb/ht1661
Ciao. -
What cable can I use to transfer data from a 2008 MacBook Pro to a new MacBook Pro with thunderbolt?
You should also ask this in the MacBook Pro forum. This is the forum for the 13” white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro -
Can I update more than one iPad and iPhone from the same MacBook pro?
Can I update more than one iPad and iPhone to ios 5 from the same MacBook pro? Our family has one MacBook pro and several iphones and ipads. No one wants to lose their iTunes music or contact list or calendars.
Yes, but you will want to think it through before you do it.
The computer will become the "master" device, holding the definitive collection of music, photos, contacts, etc., and each iPad or iPhone will get a copy of what's on the computer. So if everyone has different collections of music or photos that you all want to keep separate from each other, you'll want to set up different accounts on the MacBook Pro. To do that, go into "System Preferences" and click "Users", then click the "+" to create a new account for each person who needs their own set of files.
That way you can each log in to your own MacBook account before you sync your iPhone or iPad, and everyone has their own copy of iTunes and their own iPhoto. If you happen to plug in an iPhone while logged into someone else's account, you just click "don't sync" (the 1st time only, it will remember after that). Sharing the same files becomes tricky, so this is only the best method if you want to keep things 100% separate.
On the other hand, if you all have your music and photos mishmashed together on the MacBook anyway or just don't care about keeping things separate, just go ahead and sync your iPhones and iPads without setting up new accounts. But in this case, you should create playlists and photo albums in iTunes and iPhoto. Then plug in an iPhone, click on it's icon in iTunes, and change the settings for Music, Photos, etc to only sync the playlists that you want on that device. Repeat for each one. They'll all remember their own settings, and continue to sync with their designated playlists or albums.
What you cannot do is use more than one computer with a single iPhone. That will wipe out the music and photos that were on it already, replacing them with the ones on the second computer.
Maybe you are looking for
-
When I try to paste an CCI file into a PSD, I get this message- Could not complete the Paste command because the ICC profile is invalid. I need the layer to be an editable smart object! What's the solution? Ron
-
Hi experts i cannot use transaction BBPMAININT for an issue in srm 5.0 "Error reading roles (not maintained/no authorization?) The user has stalstrategic*purchaser role but i think that it is not enough! suggestions? regards
-
Outlook Feature Request - "After email is read" rule trigger
I organize my emails within a folder structure but only after I've read them. I would love to be able to create a Rule within Outlook that allows me to have a 'move email to folder' rule that is triggered AFTER I've read an email. Example Workflow: A
-
hi all, i have the following data WITH table1 AS select 7369 empno, 20 deptno, to_date('12/17/80','mm/dd/yyyy') dt,800 sal from dual union all select 7566 empno, 20 deptno, to_date('04/02/81','mm/dd/yyyy') dt,2975 sal from dual union all select 778
-
I'm currently using ARD3.2 and doing some research into logging out users disregarding unsaved work or quit confirmation prompts from applications. I've been trying to do this via applescript, unix, etc. but was wondering if it was possible with ARD.