Channel 58 an 59 vanished!
Hi,
I've just spent an infuriating 50 minutes on the phone to BT Technical Support and just thought I would ask on here whether anyone thinks the solution they have advised (and I argued about!) is correct.
I had both channels last night, there was a software update late evening, but didn't check sports channel. I've gone to switch on BT Sport 1 this evening and both channels have gone, they are not listed at all on the guide. Tech Support after doing so online test have identified it is probably my aerial (I have no issues at all with any other channel on either the BT Vision+ box or Fairview box in the bedroom) and are sending a 3rd party company round for a 'no obligation' check, which suggests straight away that this 3rd party company are going to try and fleece me for a new aerial!
Does anyone think this could actually be the cause? It just doesn't ring true to me but would really appreciate any feedback or if anyone else has had the same..
Many thanks
Yes, I can see them on the guide, but tells me I need to subscribe.... I noticed something about the multicast upgrade on the forum so mentioned this to him and he said it was nothing to do with it... He was adamant I needed an aerial engineer.
I am just on copper BB, do I need to ask bt sport team to change my firmware/software back?
Thanks
Similar Messages
-
No way to preserve Alpha channel with vanishing point?????
Such a great tool to use for making "sets" in After Effects, but My alpha channel disappears when I use the vanishing point filter & export to AE.
Any way to retain it?> Or do I just need to keep using the older versions of AFX.
No. Just use the previous version of Adobe Media Encoder to transcode your master file (e.g., QuickTime with PNG codec) to FLV:
removal of FLV and F4V export features from Adobe Media Encoder, After Effects, and Premiere Pro -
Tiled images are acting odd (Alpha Channel seems to be problem)
Still working on the project that is giving me all sorts of...learning exercizes. (see http://discussions.apple.com/thread.jspa?threadID=463667&tstart=0)
I thought I had everything worked out, but am having the oddest problem lately. When I put the image together, things look great until 3/4 of the pieces are in place...then all of a sudden a portion of one picture will appear in a band in another picture). Here's what I've done:
I used ImageReady to divide the image (exported from the original footage via Quicktime in a variety of ways...interlaced and then deinterlaced in Photoshop...progressive...) into 25 pieces (5X5 grid). I imported the 25 pieces into Motion and changed the pixel aspect ratio to NTSC D1/DV (I also tried doing it w/Square pixels) and placed the pieces one by one into a standard NTSC DV Motion project. Problem is, as I said, out of the blue the image will shift.
I've tried all sorts of things and they all kind of work. If I change the alpha channel it will work...for a while. If I change the field order it will work...for a while. And when I say 'for a while' I mean it will look like it's all fixed...and then out of the blue WHAM! I'll adjust the settings of one of the pieces to something that has worked before and it will go crazy again.
Basically, the only way I've been able to get it to work is to change some of the pieces to Field Order lower (and change the Field Order of the project to "none") but not all of them. If I do it kind of randomly to pieces that are not working, it seems to be fine.
Any idea what is causing this???The final image (and the project) are both 720X480. Same as the raw footage. (although....when I open the raw footage into Quicktime, it seems to be square pixels, as it is wider than the 720X480 movie that I'm linking to you here: I uploaded a .mov version of the Motion project, which just got done being processed/imported into DVDSP).
http://www.jonathanfrank.com/intro2.mov
Here's the weird thing...it looked fine in Motion! I re-created it from scratch and it seemed to work fine. I exported via Quicktime the images (used Animation setting, as it seemed to give a clearer shot). I opened the images in Photoshop, reset the Pixel Aspect Ratio to .9 (DV), cut and pasted the image to a new Photoshop document/image (the NTSC DV Menu template), exported the image into ImageReady, sliced it into a 5X5 grid, Save Optimized it as png images, imported the images into Motion, set the Pixel Aspect Ratio to .9 again (for some reason ImageReady seems to have deleted that step), and re-created the project.
And it seemed to work. I didn't get any of the 'banding' or 'sending some of column A to column B' that I did when creating it before. Everything seemed to work (except for when I cut and pasted the background Replicator from the old project to the new to save time...then I got the weird effects...which vanished when I reverted to the saved older version and didn't occur again when I inserted the Replicator into the layer from scratch).
The field ratio of the images I kept at 'none.' the field ratio of the project is "lower" (I have played with other settings previously, and making them match didn't do anything...and since it was seeming to work this time, i didn't want to mess with anything that didn't seem broken). BIt depth is 8. Frame rate on the project is 29.97, and it reads 30 on the Media tab for the images (once again, since it appeared to be working...)
Just played it in Motion and it still seems to be working (plays very slowly but I got through the first series of images w/o problems).
Might try to export it from Motion in the morning (but importing the problem one into FCP showed the same problems, even before rendering).
But if you have any suggestions...
IMac G5 Mac OS X (10.4.2) -
Samsung Continuum Music Player- 5.1 Channel error message
I have a Samsung Continuum. Recently, when I use the Music Player application, when I press the 5.1 stereo sound I get an error message that states "5.1 channel can only be activated when sound effects are off." I have no idea what sound effects it is talking about nor how to turn them off.
Little help?!No, no, the headphones work fine elsewhere.
I know of no simple electrical reason why specific things like dialogue would be cleanly squelched while background music would remain loud. I find it highly unlikely that it would be due to some problem with the wires---if it was, engineers would manufacture bad wires to perform blind source separation.
The problem is not a mere reversal of channels, but that when the headphones are plugged in the dialog vanishes. I am assuming that there is some bogus default assignment of 5.1 channels that I am unable to change. If you'd like, I can retry with another set of headphones. -
I have my apple TV plugged into my Denon receiver. My receiver is setup with 3 speaker channels, one center, one left front and one right front. When I listen to music via Airplay, sound comes only from the center channel and right, nothing on the left. When I watch Cable Television (not using the Apple TV), all 3 channels work fine so I know that the speaker connections are fine.
I had problems with streaming until I changed the WiFi channel that I was using. The original one conflicted with my neighbor. After that, MOST of my streaming problems vanished. Occasionally, a movie would pause for more buffering and I eventually ran an ethernet cable from the Apple TV to my Apple Extreme (to eliminate the Wifi). I have not had a single problem since then (except to repair the drywall after running the ethernet from one floor to another). :-)
-
I would normally call it a crash "but it seems different"
NO ERRORS, NO MESSAGES, NO NOTHING..
I work in 64Bit PS... usually on large format artwork.. files as large as 500" X 120" @100 dpi..
When working in the 32bit version.. NO ISSUES..
When working in 64bit...
I will be going to "SAVE" a file... and WHILE NAVIGATING the file manager... "clicking into folders" or "creating a new folder"
The entire program just vanishes... in a split second... This happens maybe once or twice a day..
What I have done..
1) I tried adjusting the OPEN GL settings to "BASIC"
2) I insatlled the new update to Photoshop 12.. sumthin'
3) and I also updated the display drivers to latest version..
Any thoughts? Losing a HUGE HUGE project with no chance of saving is terrible.Bah, I thought I was onto something, because I had been able to complete the same edits on the same image 4 times successfully where I
hadn't been able to do so before, but it just failed again (this time with a crash when trying to open the same raw image again after saving and closing).
Could be two different bugs I suppose... It did take a lot longer to reproduce the problem.
Here's a detailed edit log of what I did:
2011-06-30 18:15:24 File IMG_5060.CR2 opened
Open
C:\MMEDIA\Photos\2011\06\Starmus Trip to Tenerife - Canary Islands\IMG_5060.CR2
As: Camera Raw
Model: “Canon EOS 40D”
Settings: Custom
White Balance: As Shot
Without Convert to Grayscale
Exposure: 0.4
Blacks: 4
Brightness: 50
Contrast: 25
Saturation: 2
Sharpen Amount: 28
Luminance Noise Reduction: 40
Color Noise Reduction: 7
Chromatic Aberration R: -13
Chromatic Aberration B: -3
Vignetting Amount: 0
Shadow Tint: 0
Red Hue: 0
Red Saturation: 0
Green Hue: 0
Green Saturation: 0
Blue Hue: 0
Blue Saturation: 0
Fill Light: 25
Vibrance: 0
Recovery: 0
Clarity: 0
Defringe: 2
Hue Adjust Red: 1
Hue Adjust Orange: 3
Hue Adjust Yellow: 5
Hue Adjust Green: -5
Hue Adjust Aqua: -25
Hue Adjust Blue: 3
Hue Adjust Purple: 0
Hue Adjust Magenta: -3
Saturation Adjust Red: -5
Saturation Adjust Orange: -4
Saturation Adjust Yellow: 1
Saturation Adjust Green: 8
Saturation Adjust Aqua: -2
Saturation Adjust Blue: 13
Saturation Adjust Purple: -2
Saturation Adjust Magenta: -2
Luminance Adjust Red: -5
Luminance Adjust Orange: -3
Luminance Adjust Yellow: 0
Luminance Adjust Green: 8
Luminance Adjust Aqua: 12
Luminance Adjust Blue: 0
Luminance Adjust Purple: 0
Luminance Adjust Magenta: 0
Split Tone Shadow Hue: 0
Split Tone Shadow Saturation: 0
Split Tone Highlight Hue: 0
Split Tone Highlight Saturation: 0
Split Tone Balance: 0
Parametric Shadows: 0
Parametric Darks: 0
Parametric Lights: 0
Parametric Highlights: 0
Parametric Shadow Split: 25
Parametric Midtone Split: 50
Parametric Highlight Split: 75
Sharpen Radius: 0.5
Sharpen Detail: 100
Sharpen Masking: 0
Post Crop Vignetting Amount: 0
Grain Amount: 0
Luminance Noise Detail: 100
Color Noise Detail: 50
Luminance Noise Contrast: 0
Lens Profile Enable: 1
Transform Distortion: 0
Transform Vertical: 0
Transform Horizontal: 0
Transform Rotate: 0
Transform Scale: 100
Tone Curve: 0, 0, 34, 22, 67, 60, 138, 144, 193, 204, 255, 255
Camera Profile: “Camera Standard”
Camera Profile Digest: “F0D06C559756F7BD7331A9DB44BF84DD”
Lens Profile Setup: 2
Lens Profile Name: “Adobe (Canon EF 28-135mm f/3.5-5.6 IS USM)”
Lens Profile File: “Canon EOS-1Ds Mark III (Canon EF 28-135mm f3.5-5.6 IS USM) - RAW.lcp”
Lens Profile Digest: “948982B3427086C43F8A1A3DE06A7C95”
Lens Profile Distortion: 0
Lens Profile Aberration: 100
Lens Profile Vignetting: 50
Process Version: 84344832
Retouch: “”
Red Eye: “”
Local Adjustments: “”
Crop Top: 0.036
Crop Left: 0
Crop Bottom: 0.964
Crop Right: 0.995
Crop Angle: -1.409
Without Constrain Crop
Space: ProPhoto RGB
Depth: 16 Bits/channel
Scale: 1.58
Resolution: 100
Resolution Unit: Pixels/inch
Output Sharpen For: None
Play action “Convert ProPhoto to sRGB” of set “Hot Keys”
Crop
Crop
To: quadrilateral
Center: 1974.5 pixels, 3010.5 pixels
Corner: 87.9 pixels, 0 pixels
Corner: 3493.3 pixels, 0 pixels
Corner: 4020.9 pixels, 6021 pixels
Corner: 0 pixels, 6021 pixels
Target Width: 0 pixels
Target Height: 0 pixels
Target Resolution: 0 per inch
Magic Wand
Set Selection
To: 3990 pixels, 5965 pixels
Tolerance: 12
Expand
Expand
By: 3 pixels
Feather
Feather
Radius: 2 pixels
Fill
Fill
Using: content aware
Opacity: 100%
Mode: normal
Deselect
Set Selection
To: none
Select history state -3
Fill
Fill
Using: content aware
Opacity: 100%
Mode: normal
Select blur
Deselect
Set Selection
To: none
Blur Tool
Blur Tool
HDR Toning
Scripts
File: C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)\Required\HDRToning.jsx
“undefined”
Shadows/Highlights
Shadow/Highlight
Shadow: Parameters
Amount: 25%
Tone Width: 13%
Radius: 100
Highlight: Parameters
Amount: 0%
Tone Width: 25%
Radius: 100
Black Clip: 0.005
White Clip: 0
Contrast: 12
Color Correction: 0
2011-06-30 18:19:31 File C:\TEMP\PrettyApartmentInLasAmericas6.psd saved
Save
As: Photoshop
In: C:\TEMP\PrettyApartmentInLasAmericas6.psd
2011-06-30 18:19:42 File C:\TEMP\PrettyApartmentInLasAmericas6.jpg saved
Save
As: JPEG
Quality: 10
With Optimized
Matte: none
In: C:\TEMP\
With Copy
Select history state -13
Select last history state
2011-06-30 18:20:26 File PrettyApartmentInLasAmericas6.psd closed
2011-06-30 18:20:26 File C:\TEMP\PrettyApartmentInLasAmericas6.psd saved
Close
Photoshop
C:\TEMP\
Saving: yes
Immediately upon doing File - Open and selecting the very same raw file again, Photoshop crashed with this error:
Faulting application name: Photoshop.exe, version: 12.0.4.0, time stamp: 0x4d9d8f8e
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x000000007788004f
Faulting process id: 0x1938
Faulting application start time: 0x01cc37719d27c9c9
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)\Photoshop.exe
Faulting module path: unknown
Report Id: 2aa969ef-a367-11e0-ba04-005056c00008
I was offered the opportunity to Debug, and when I did so Camera Raw.8bi was on the Call Stack.
-Noel -
RGB channel doesn't show the imported images...
RGB channel doesn't show the imported images... i can see them in seperate blue, red and green channel but not in RGB...please help....
(I'm using Photoshop CS6)The problem appears in every image I try to open (whatever format or origin). The images I try to import come from rendering in Autodesk 3ds max , from my camera (sony cyber-shot ) or are just stock images... I had no problem with photoshop cs5.1....
Here's my system info:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x32
Operating System: Windows Vista 32-bit
Version: 6.0 Service Pack 2
System architecture: Intel CPU Family:6, Model:7, Stepping:10 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1
Physical processor count: 2
Processor speed: 2394 MHz
Built-in memory: 3038 MB
Free memory: 1387 MB
Memory available to Photoshop: 1671 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: ATI Mobility Radeon HD 4650
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 900, right: 1600
Video Card Number: 1
Video Card: ATI Mobility Radeon HD 4650
OpenCL Unavailable
Driver Version: 7.01.01.849
Driver Date: 20090208190620.000000-000
Video Card Driver: atidxx32.dll,atidxx64,atiumdag.dll,atiumdva.cap,atiumd64,atiumd6a,atitmm64
Video Mode: 1600 x 900 x 4294967296 colors
Video Card Caption: ATI Mobility Radeon HD 4650
Video Card Memory: 1024 MB
Video Rect Texture Size: 8192
Serial number: 92298703051332501777
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6\
Temporary file path: C:\Users\User\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 224,5G, 166,2G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/01/18-15:07:40 66.492997 66.492997
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/02/09-16:00:02 4.0.93 66.496052
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1654
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/01/18-15:07:40 66.492997 66.492997
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/01/18-15:07:40 66.492997 66.492997
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/01/18-15:07:40 66.492997 66.492997
BIBUtils.dll BIBUtils 2012/01/18-15:07:40 66.492997 66.492997
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/01/18-15:07:40 66.492997 66.492997
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libeay32.dll The OpenSSL Toolkit 0.9.8g
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp71.dll Microsoft® Visual Studio .NET 7.10.3077.0
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr71.dll Microsoft® Visual Studio .NET 7.10.3052.4
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (32 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
shfolder.dll Microsoft(R) Windows (R) 2000 Operating System 5.50.4027.300
ssleay32.dll The OpenSSL Toolkit 0.9.8g
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.0
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Embed Watermark 4.0
Extrude 13.0
FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Measurement Core 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mezzotint 13.0
MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Pinch 13.0
Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0
Shear 13.0
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Sumi-e 13.0
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
Underpainting 13.0
Vanishing Point 13.0
Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Wind 13.0
Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONE
Thank you both for the interest! -
CS3: Vanishing Point won't work
I have a fairly large PSD (130MB) that I need to run the Vanishing Point filter on. I did it once, no problem. Now when I try I get an error:
Tried on two different machines, each with CS3 and 10 GB RAM.
What gives? Is there a less helpful error message in Photoshop?I have had similar issues and this has worked for me. Copy the background layer, then create a new document, you will not need to do anything to the size because PS will use the size of the file you just copied. After it opens paste your image. If you need any other layers you can drag those over as well, but if you don't need them before you go into vanishing point I would wait until after you have run vanishing point just to be safe. For some reason creating this new document seems to do the trick, but I have found that sometimes, after I have worked on a file a while, the same thing will happen again. So you have to do the whole copy, new document thing again.
Steve
PS: I have this issue on all three of my computers, Dual 2ghz GD, Quad 2.5ghz G5, and 8 Core 3ghz Mac Pro. I have 18 gb ram on my 8 Core and my scratch drive is a raid 0 and consists of 6 15k drives striped over 2 channels. So it's not an issue with scratch or not enough ram. -
File transfer using non-blocking sockets - data mysteriously vanish
Hello,
I need to pass some big amount of data using sockets. I my appliaction I have noticed that sometimes I didn't get all bytes. To check it out I wrote simple client + server to figure out what is happening. So:
- I have a sender and receiver application
- I'm trying to transfer 5MB text file.
- On receiver side, output file is never larget than 3MB
- If I put some timeout on sender side (1ms timeout between write operations) everything works fine.
Could someone tell me what I do wrong? Why data disappears and when? The same file transfered using old sockets goes always fine...
Thanks in advance!
Here is complete source for receiver and sender:
RECEIVER:
import java.io.FileOutputStream;
import java.net.InetSocketAddress;
import java.nio.ByteBuffer;
import java.nio.channels.SelectionKey;
import java.nio.channels.Selector;
import java.nio.channels.ServerSocketChannel;
import java.nio.channels.SocketChannel;
import java.util.Iterator;
public class ReceiverA {
* @param args
public static void main(String[] args) {
String outputFile = "c:\\outputA.txt", host = "127.0.0.1";
int port = 8001, bufferSize = 10240;
try {
ByteBuffer buffer = ByteBuffer.allocate(bufferSize);
Selector selector = Selector.open();
ServerSocketChannel server = ServerSocketChannel.open();
server.configureBlocking(false);
server.socket().bind(new InetSocketAddress(host, port));
server.register(selector, SelectionKey.OP_ACCEPT);
System.out.println("Server started");
while(true)
selector.select();
Iterator<SelectionKey> iterator = selector.selectedKeys().iterator();
while (iterator.hasNext()) {
SelectionKey key = (SelectionKey) iterator.next();
iterator.remove();
if (key.isAcceptable()) {
SocketChannel client = server.accept();
client.configureBlocking(false);
client.register(selector, SelectionKey.OP_READ);
continue;
SocketChannel channel = (SocketChannel) key.channel();
int counter = 1;
if ( key.isReadable() ) {
FileOutputStream os = new FileOutputStream(outputFile);
int res;
do
buffer.clear();
res = channel.read(buffer);
counter += res;
System.out.println(res);
buffer.flip();
os.write(buffer.array(), 0, buffer.limit());
while( res >= 0 );
channel.close();
os.close();
System.out.println("Receiver: " + counter);
return;
} catch (Exception e) {
e.printStackTrace();
}SENDER:
import java.io.FileInputStream;
import java.io.IOException;
import java.net.InetSocketAddress;
import java.nio.ByteBuffer;
import java.nio.channels.SelectionKey;
import java.nio.channels.Selector;
import java.nio.channels.SocketChannel;
import java.util.Iterator;
public class SenderA {
public static void main(String[] args) {
String inputFile = "c:\\inputA.txt" , host = "127.0.0.1";
int port = 8001, bufferSize = 10240;
try {
ByteBuffer buffer = ByteBuffer.allocate(bufferSize);
byte[] byteArr = new byte[buffer.capacity()];
Selector selector = Selector.open();
SocketChannel connectionClient = SocketChannel.open();
connectionClient.configureBlocking(false);
connectionClient.connect(new InetSocketAddress(host, port));
connectionClient.register(selector, SelectionKey.OP_CONNECT);
while(true) {
selector.select();
Iterator<SelectionKey> iterator = selector.selectedKeys()
.iterator();
while (iterator.hasNext()) {
SelectionKey key = (SelectionKey) iterator.next();
iterator.remove();
SocketChannel client = (SocketChannel) key.channel();
if (key.isConnectable()) {
if (client.isConnectionPending()) {
System.out.println("Trying to finish connection");
try {
client.finishConnect();
} catch (IOException e) {
e.printStackTrace();
client.register(selector, SelectionKey.OP_WRITE);
continue;
if(key.isWritable()) {
FileInputStream is = new FileInputStream(inputFile);
int res;
int counter = 0;
do
buffer.clear();
res = is.read(byteArr, 0, byteArr.length);
System.out.println(res);
if ( res == -1 ) break;
counter += res;
buffer.put(byteArr, 0, Math.min(res, buffer.limit()));
buffer.flip();
client.write(buffer);
* When I remove comment file transfer goes OK!
//Thread.sleep(1);
while( res != -1 );
client.close();
is.close();
System.out.println("Receiver: " + counter);
return;
catch(Exception e) {
e.printStackTrace();
}There are at least two problems here.
A. In the receiver you should test for -1 from the read() immediately, rather than continue with the loop and try to write -1 bytes to the file.
B. In the sender you are ignoring the return value of client.write(), which can be anything from 0 to the buffer length. If you get 0 you should wait for another OP_WRITE to trigger; if you get a 'short write' you need to retry it until you've got nothing left to write from the current buffer, before you read any more data. This is where the data is vanishing. -
Hello, would really appreciate your help on this one. I downloaded a Facebook app when I purchased my blackberry phone, and have had this app for 12 months now. Suddenly, this app has vanished from my home screen and from the app world. I re-installed it, it said it had downloaded successfully, yet I cannot find it? I have looked in the 'download' file and it's not there. I would really appreciate some help, thanks.
1. On your homescreen, press the Menu key > SHOW ALL, so that SHOW ALL is checked.
2. Look in EACH folder on your device... Applications, Instant Messengers, Downloads, etc.
If you still don't see it, look at Options > Advanced > Applications. Do you see it listed there?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
"DocHandal Speaks! Listen Up" all but 2 of 97 episodes vanished off listing in itunes store. There are 2 left however when you attempt to click on channel name it states not available in US store. Yes tried other countries-same. So just logged in and tried to submit podcast URL again, and iTunes said that this URL was already submitted (?!?!?). Feed validator okay. So it seems like iTunes thinks the podcast stream is recognized, yet its not being displayed. Very perplexing. any ideas?
Did you ever get this figured out? I'm having the exact same issue. The podcast vanished and now I'm getting a 403 error - even though feedvalidator says it's fine and I can subscribe manually.
-
N i p/Tuck Vanished ??????????????
Hi Can a Forum Mod ask the BTV boys & Girls why N i p/Tuck has vanished suddenly
1st Half of the Series is/was due to go off on 16th October and the 2nd half in mid November. But the entire series has gone. Not in A-Z, Search or Channels on Demand (WBTV)
Someone press "Delete" in error or were the end dates incorrect?
Either way someones mistakeso, if you could fix asap so I could watch the rest of the series that would be appreciated (or tell me you can't fix so I can make alternative arrangements)
Look forward to a resolution
TaHi Dave1403,
Thanks for posting. I'll get in touch with the Vision guys and see what I can find out. If I get anything I'll post it here.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
Sometime last night, about 9:30 I'm guessing, channel 474 WETA UK just started playing something completely different. It continues this morning. Did anyone else experience this? Where did that channel go?
nets4ever wrote:
Does anybody now when the NBA channel coming? I look today and now its gone all together!!!!! What {please keep your posts courteous} is going on...just put the {edited} channel on already VERIZON!!!!!!!!!!
Message Edited by KaLin on 02-04-2009 01:29 PM
I guess the same place the other "Coming Soon" channels went to. I am wondering what happend to all those in the November guide that has not been updated, but have vanished from the STB. Is the economy so bad that we can not get what was promised? Last I looked we are still paying. I guess it depends on what coming soon means to you. Kinda like it depends on what is is. -
New DVR Issues (First Run, Channel Switching, etc.)
I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
I recently switched to FIOS from RCN cable in New York. I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
1. I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention. Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording. I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows. I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR. Is there a setting I can change that will force the DVR to choose one of the recording channels?
2. I setup all my recordings for "First Run" because I only want to see the new episodes. One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day. My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new". Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR. Any fixes?
Thanks for the help.
Solved!
Go to Solution.I came from RCN about a year ago. Fios is different in several ways, not all of them desirable. Here are several ways to get--and fix--unwanted recordings from a series recording setup.
Some general principles.
Saving changes. When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes. Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options. Look at the Series Options window. Look at the far right side. There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes. Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
Default Series Options. This is accessed from [Menu]--DVR--Settings--Default Series Options. This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options. You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create. Be sure to SAVE your changes. This is what you will get when you select "Create Series Recording" from the Guide. When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead. Series Options can always be changed for any individual series set up later--but not for all series at once.
Non-series recordings. With Fios you have no directly available options for these. With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series. With Fios, your workarounds are to create a series with options for a single program, then delete the series later; change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
And now, to the unwanted repeats.
First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only". If not, fix that and SAVE. Then check you results by viewing the current options using the Series Manager app under the DVR menu.
Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New". It happens. Set the series option "Air Time" to "Selected Time". To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide. Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored.
Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New". These can be ignored in your series if you set the series option "Channel" to "Selected Channel". Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes". However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.
As for you missing two minutes, I have sereral instances in which two programs start recording at the same time. To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time. You might have an older software version. Newest is v.1.8. Look at Menu--Settings--System Info. Or, I might not have noticed the loss of minutes. I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording. There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them. With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half. -
New .TV (pets, recipe, etc.) and Viacom channels not in zap2it or Tivo guides
So, it's been about a month since the new .tv channels came out and two days since the Viacom HD channels were introduced. And zap2it.com, Tivo, etc. all still don't list ANY of the new channels in their programming guides.
I've opened cases with Tivo. With Zap2it. With Verizon. Everyone points fingers saying it's the other's fault.
In the meantime, for the .TV channels that got added a while back, if you go to zap2it, or Tivo, you get "loor633" for channel name and "to be announced" for guide info for pets.tv. You get "loor599" for Cars.tv. You get "loor674" for MYDestination.tv. Etc.
And for the Viacom channels, you also get nothing. Just blank space with "to be announced" for programming info.
From what I understand, Verizon needs to tell Tribune that their channel lineup has changed. And Tribune, Zap2it and Tivo all claim that Verizon hasn't done that. Verizon, of course, is silent on the matter and the "fiber solutions center" says there is nothing they can do right now and that channel info for the .tv and Verizon channels might get added to online guides in a few MONTHS!?!?!?!?!?!?
Why does this seem to be a problem with Verizon's lineup and no one else's? When I had Dish, Zap2it would have updated listings within 2 hours of new channel additions. When I had Charter, both Zap2it and Tivo had channel guide info for new channels usually the day BEFORE the channel was added. But Verizon doesn't seem to provide Tribune with new channel info / guide data at all.
Having had FIOS for less than two months, I'm not happy. I'm almost certain the goal is for Verizon to get me to dump my lifetime Tivo service and instead pay them $15.99 for their DVR. But trust me -- I'd rather go back to Charter first.
Message Edited by skierrob2 on 06-24-2009 10:44 AMI do not understand why you folks are blaming Verizon for this. Please give me a moment to explain my theory.
First of all, I have been for a long time a very dissatisfied user of the FiOS Guide data. So dissatisfied that late last year I sent an email to Verizon's CEO expressing my dissatisfaction, and providing examples and pointers to various forum threads discussing the problem. I received maybe 4 or 5 phone calls about the issue, no resolution, but I was told the procedure for the FiOS Guide was this:
Each channel (say ESPN, whatever) develops the data, and sends it to FYI Television of Grand Prairie, TX (in the DFW area). FYI gathers the schedule info from all of the channel providers and once a day sends that data to Verizon. Verizon then inputs the data to the Guide and bingo, we see it, good or bad (lots and lots of bad IMO). I have no way to know if this is really the process, but this is the way it was explained and it makes sense to me.
Now, lets talk about one of the other guide providers for the Tivo or whatever. It seems to me that a very similar process would have to take place: channel to guide data collector to actual guide data provider (maybe the last two are one and the same?).
Now, where would Verizon be in this process for the other guide data providers? Seems to me nowhere, it should be the responsibility of the channel to notify the data provider that the channel is now on FiOS, what the channel name and number is, etc.
I am sure you will disagree with me, but where am I wrong? It seems to me you should be complaining to the channel providers, not Verizon.
(jumping into the foxhole....)
Justin
Verizon FiOS TV, Internet, and phone
IMG 1.6.2, Build 08.58
Keller, TX 76248
Maybe you are looking for
-
HP Laserjet p4015 auto select envelop feeder
Client machine will not automatically select envelope feeder when printing envelopes. I have two windows 7 clients using the same driver and same versions of software printing to the same Lazerjet P4015 printer. One selects automaticly selects th
-
Hi, I have made a series of ascii-drawings as illustrations for a story book. This is very font sensitive and the font that I am using is "Courier". An example is shown below. ~V~ ~V~
-
I am trying to output a PDF gallery from CS6 bridge in 10.8.5 on a Mac.
I am trying to output a PDF gallery from CS6 bridge in 10.8.5 on a Mac. No options are available from the pull-down Output arrow.
-
Fix for Shuffle on XP Machines
I, like many others, had the problem of my Shuffle no longer being recognized on any of my computers. The PC would load the device as a drive letter but, I could not access it with Itunes or Win Explorer. The tunes I had on the shuffle would still pl
-
Muse Listed As Installed After Uninstall
I was having the validation error with Muse. I uninstalled it with Add & Remove Programs. Creative Cloud still lists it as Installed. I'm using Windows 8. How can I reinstall Muse?