Channel Data filters in DIAdem

Hi All,
I am having NI DIAdem installed in my system.
I am having data to be analysed in .csv format and the same data i am able to see in DIAdem.
There are number of channels in this data.
There are Channel filters in DIAdem at the top right corner on Data Portal which can filter one channel within the entire channels in the data.
Suppose in one channel, i am having date & time (time stamp) when a particular data record was recorded having different channels in it..
Now, this channel is having say 1000 records/data corresponding time stamps.
My question is can i filter entire data as per the selection of time stamp for one channel/channels(s).
I did not found any tool in DIAdem to do this.
Can anyone tell me.
Samriddh Sarbalhi

Hi Samriddh,
Let me try to clarify your request. Let's stay with the example of data channels with 1000 values in them. Will each channel have one date/time value associated with it or 1000? Will all the channels in one data file have the same date/time value? Do you want to concatenate together all the channels which have date/time values in the correct range? If so, will some of those channels to concatenate come from different files?
I think we can use the DataFinder to tackle these issues, as long as you don't have 1000 different date/time values in each channel. In that case we'll need to use a channel calculator or calculation manager session to filter the specific rows you want from one or more channels.
Brad Turpin
DIAde Product Support Engineer
National Instruments

Similar Messages

Read cDAQ device data directly into diadem

I need to read data acquisition hardware analog channels directly into Diadem for display, logging and analysis.
Has anyone done this? I cannot even find the drivers in Diadem to add it as a data source.
Software installled: Diadem 2012 / NI MAX / Signal Express 2013 LTE
Hardware: 2x cDAQ 9181, 1 with NI9201 -10/+10v analog input, 1 with NI 9203 current input.
I am able to conifgure the modules, read and display then in signal express, but I have no idea how to get the channel data directly into Diadem.
Thanks, Jim

Jim,
Please check chapter 2-1 of the attached manual to set up NI hardware with DIAdem DAC.
Let us know if you need additional information.
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."
Attachments:
DIAdem_DataAcquisition.pdf ‏1902 KB

DAC: How to read channel Data

How can I read Values from Diadem-Datachannels to DAC?
There is a control "Channel Data" ("Simulation Kanal" in german release). It can read data from channels with a clock-signal.
How can I reset the read-pointer to the first channel-entry without restarting DAC?
How can I read arbitrarily data from a channel.
Is there a completly different way to do that?
Martin Bohm
[email protected]

Ja, genau diesen Block "Kanäle" meinte ich in meinen obiigen
Ausführungen. Mit seiner Hilfe kann ich Daten aus aus Kanälen des
Datenportals lesen, aber nur in der original Reihenfolge beginnend mit
der ersten Zeile.
Ich kann nicht:
- wahlfrei auf ein bestimmtes Datum zugreifen
- den Lesezeiger gezielt auf den Anfang zurücksetzen.
- Ferner müssen die Kanäle bereits vor Start desDAC-Plans bekannt sein. Ich kann die Kanäle nicht dynamisch verwenden.
Damit ist dieser Block nahezu unbrauchbar.
Ich habe inzwischen eine Lösung gefunden: Der Block "freie Formel" kann
über die Funktion "ChD(y,x)" beliebig auf das Datenportal
zugreifen. Die Verwaltung der Eingänge x und y kann in DAC, also
online erfolgen

HP Mediasmart DVD on a6750t will not output 5.1 channel data via SPDIF or HDMI

So I got a new customized HP desktop on Friday. Started to play with it on Saturday. I called Sunday morning to request an RMA number and return shipping label. Here is my saga:
Started HP issue calls at 3:47am FEB 15th 2009
Gion (per rep spelling) stated return will be handled through warrantee/support department). He stated HP does not allow them to release a badge number. Ticket# xxxxxx3374.
(Transferred to warrantee/support department)
(The line was full of static- asked for the 800 to call back. Person said he didn’t have the number I called in on. Had to log on to www.hp.com. Found the number to call was 1 (800) 474-6836. I called this number.)
Satya (per rep spelling) answered the line. I informed rep that I am not receiving any 5.1 output from the Blu-ray disk software that was provided by HP (HP Mediasmart DVD). Advised him that all MS products, DVD's, and HD devices were sending 5.1 channel output to my Yamaha receiver. [DVD’s are the important part. As the same drive is used for BOTH DVD and Blu-Ray, it is my opinion that the hardware is working fine.] I reiterated many times that the only thing not sending 5.1 channel data was the HP MediaSmart DVD software player for Blu-Ray disks.
Satya ran various tests and wanted to “call back tomorrow with a solution“. He seemed to think that perhaps there was a problem with hardware and possibly I had not received something in my order.
I clearly started I wanted a RMA number and I wanted to return the product. Satya refused saying he had to "research" the problem before he could issue the RMA number and return the product. He said he would call me between 2pm and 5pm tomorrow (MST) (I informed him it was currently 4:49 am at my location.)
The problem is not with the hardware. All Microsoft software products that offer 5.1 channel support are sending via SPDIF (optic cable) 5.1 channel data. Again, all DVDs and other 5.1 devices (HD PVR) are sending (via SPDIF) 5.1 channel data to my Yamaha receiver. The only thing not outputting in 5.1 is the Blu-ray disk software player (HP Mediasmart DVD). DVD’s are ran using the Blu-ray drive (only one on the system) and are sending 5.1 channel data with no issues.
Ended HP issue calls 4:52am FEB 15th 2009
So, any other suggestions? I have tried various things like HDMI-Passthrough, HDMI-PCM, SPDIF, and 6 speaker output on the HP MediaSmart DVD Blu-ray software player application to no avail.
This question was solved.
View Solution.

FEB 16th 2009 1:15 am
Decided to try some trial Blu-ray programs to see if this issue can indeed be resolved with a different software package.
Corel’s WinDVD9 would not play a Blu-ray disk. I received no errors. The program loaded the disk, after about 10 seconds stopped and went back to the main screen.
Cyberlink PowerDVD had a trial limitation that does not allow Blu-ray disk playback.
ArcSoft TotalMedia Theater (TMT) works flawlessly. Outputs in 5.1 surround with no issues, therefore my assumption that it’s a software issue is correct.
Due to the problem being software related, I will call HP to see if there is a way they can send me a different Blu-ray software player. I like the system and do not really want to ship this back to HP. There is a sale tomarrow and I might even buy another system for my mother if HP will work this out.
HP call start at 2:06 am FEB 16th 2009
Called 1 (800) 474-6836. Satya answered the line. He asked if his supervisor had called me. I stated no, I had only received his call at 7:47pm and I had placed a call to Bridgette at 8:37 pm for a RMA number and shipping label.
I advised him I was willing to try and work with HP now that I found it was indeed a software issue. I asked him if there was a possibility of getting a different software player that would work with my setup. I advised that on my own I found that ArcSoft TotalMedia Theater (TMT) trial version works (based on me installing a trial version). Its my understanding that HP provides many software titles from ArcSoft including a MediaConverter I also purchased for the desktop.
He placed me on hold to find out.
He said HP doesn’t carry or support ArcSoft TotalMedia Theater. He said he would have a supervisor call me back within 24 hours with a solution. I advised him to stop the RMA. He stated an RMA had not been issued yet. I gave him the RMA number I had and advised I had received a shipping label via email from Bridgette per my earlier call. He placed me back on hold to check.
He said he cancelled the RMA and would have a supervisor call me back between 2pm - 5pm (within 24 hours).
Call ended at 2:34 pm FEB 16th 2009
I am guessing that HP support is not enpowered to solve a problem like mine. I would have been willing to work out something with HP but its is seeming more and more that HP really doesnt want my business. The issue here is software limitation PLAIN AND SIMPLE. I paid (in part) for a Blu-ray player that would play Blu-ray disks and output sound in 5.1. The TRIAL version of ArcSoft TotalMedia Theater works fine. Therefore the hardware is fine.
Without a different software player shipped to me OR me buying the ArcSoft TotalMedia Theater software for 80 dollars, I am forced to listen to Blu-ray disks in 2 channels. I would like to work with HP but if HP will not work with me then I have no choice than to return the product.

How to save my 3 channel data like this

Hello,I need your help. I acquired 3 channel data.I have a push button called marker.When marker button is pressed it will be saved in a text file as 1 if it's not pressed it will be saved as 0 with other data.I think it will more clear to explain like below.I want that the saved data in a text file will be like thisECG,GSR,BR are my acquired data)
Time ECG GSR BR Marker
. . . . 1
. . . . 0

I was having problems putting "marker" after "time", but I hope this helps. You can open the text file in excel for spreadsheet form if you want.
Lauren
Attachments:
marker.vi ‏47 KB

What is Data filtering and Segment filtering in ALE/IDOCs

Hi sap gurus
what is Data filtering and Segment filtering in ALE/IDOCs

Hi,
Filtering at the IDoc Level
Identify the filter object (BD59)
Modify the distribution model
Segment Filtering
specify the segments to be filtered (BD56)
The Reduced IDoc Type
Analyze the data.
Reduce the IDoc type (BD53)
Thanks and regards.

Load data filtering on a dimension's member - ESSCMD MaxL

Hi.
I would like to load data filtering records on a dimension's member. Referring as example to Sample's database outline, I would like to load only records with product 100-10.
I know that I can use Select command from Record 's rule menu in Administration Console; however, I would like to use ESSCMD or Maxl to do the same.
Is it possible? Any issue?
Thanks a lot in advance.

No it's not possible. The selection/rejection criteria are in the load rules and you can't pass parameters to them.
I think in 9.3.1 you could put a substitution variable in a load rule but have not tried it yet. If so, you could add that to MaxL to update the variable then use the load rule to load the data. You will have to try it as I have not done so yet.

Again Multiple channel Data Acquisition

Again help require
I m using
Config_DAQ_Event_Message with CallBack Functon
Scan_SetUp
Scan_Start
to get data from single channel but the parameter in scan_setup is only Single ChannelNum But I want to get Data from 8 channels at the same time so how is it possible that i can get data from 8 channels using above DAQ API's Help with some VC++ code
If I give total no of chanels in Scan_setup then it creates exception with Config_daq_event_message if I donot use Cofig_Daq_Event_Message then it all works correctly and data from 8 channels is acquired correctly in double buffer but i must use callback with config_daq_event_message,Scan_setup,and Scan_Start API to get double buffer mutiple channel data acqusition. thanks

Hello,
Please see the response to your original post:
http://forums.ni.com/ni/board/message?board.id=231&message.id=3322#M3322
Regards,
Sean C.

Is Data filtering possible in TreeTable examlple 0.

Hello everyone,
I have used an opensource example "TreeTable example 0" provided by sun to develop an application and it is working very file for me. But Now, I want to develop a feature of data filtering whether column wise or data wise.
So, is it possible to achieve it in that code.

Hello,
See these docs,
[System Copy Procedures |https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50960d8f-6542-2a10-3ba8-e46dc23dd9b1]
[System Copy and Migration|System Copy and Migration ]
[Setting up Business Intelligence Client in NW2004s|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/007af9a7-e48e-2a10-5c85-fcac22d58e82]
[System Copy for SAP Systems Based on SAP NetWeaver 2004s SR2 ABAP and Java|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/200ebc93-dabe-2910-c1a6-c4ec30b20e04]
[Homogeneous and Heterogeneous System Copy for SAP Systems Based on SAP NetWeaver 2004s|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f022aa7d-0c01-0010-20a5-c247330d47fa]
[System Copy for SAP Systems Based on SAP NetWeaver 2004s SR1 ABAP|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d10bf27d-0c01-0010-6995-bbdcdf0118a1]
[System Copy for SAP Systems Based on SAP NetWeaver 2004s SR2 ABAP|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e08502d4-dabe-2910-bbb4-c1bfc82aed73]
[System Copy for SAP Systems Based on SAP NetWeaver 2004s SR2 Java|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bd5cee-dabe-2910-fb97-c082a7c9c682]
Thanks
Chandran

Need help with data filtering on groups/application roles

Hello,
I have a situation where I have to apply security on objects (reports, prompts etc) and dimension members (Essbase cube). So the idea is like this:
Report 1: access to three users (U1, U2, U3), but for dimension Company they have separate rights:
U1: Company A, Companies A.1-A.7 (children of A) and Companies A.1.1-A.1.9 (children of A.1);
U2: Company A.1 and Companies A.1.1-A.1.9;
U3: Company A.1.1
same for Report 2, but users must have access to different companyes, like Company B, B1...
In WebLogic Console I created three groups (G1-G3) and placed each user to a group (U1-> G1, U2 ->G2, U3->G3). Then in WebLogic EM I created three application roles (R1-R3) and added for each, corresponding user (R1-> U1, R2->U2, R3-> U3).
My approach was to use application roles like this:
R1: include User1 and filter data on repository by application role to each generation of the cube ("Data_Source_Name"."Dimension_Name"."Generation2,Dimension"='Company A',"Data_Source_Name"."Dimension_Name"."Generation3,Dimension"='Company A.1', "Data_Source_Name"."Dimension_Name"."Generation4,Dimension"='Company A.1.1')
R2: include User2 and filter data on repository by application role to each generation of the cube ("Data_Source_Name"."Dimension_Name"."Generation3,Dimension"='Company A.1', "Data_Source_Name"."Dimension_Name"."Generation4,Dimension"='Company A.1.1')
R3: include User3 and filter data on repository by application role to each generation of the cube ("Data_Source_Name"."Dimension_Name"."Generation4,Dimension"='Company A.1.1').
I've noticed that, by default, each role inherites BIConsumer and "localmachineusers" application roles, so I set in repository these both roles to filter data as the role 3 (the lowest level of acces), in order for my roles (Roles 1 to 3) to have the highest privileges.
In repository I cannot see any of my users (U1-U3), but just the application roles they are in.
For Report 1 I set the access to Roles 1-3 and when I am logged on as U3 this report should display only the data for Company A.1.1, but it doesn't (displays data also for Company A, Companies A.1-A.7).
In fact it seems, that the data isn't filtered at all, which drives me to the conclusion that my data filter is override by another role, maybe ?
Could you please give me a clue about what I am missing here ?
Thank you.

Amith,
Please bear this with me - see my comments below (search for petresion_Comments):
So, we have three users who have access to a report called Report1. But the data that they see in the report needs to be different. The report has a dimension company, and each user needs to see different companies data. So the filtering needs to be done on company dimension.
petresion_Comment: That's my case to solve.
Now the groups in weblogic has no purpose in OBIEE 11g unless you are using an LDAP authenticator who has groups defined in the active directory. By this I mean the network people are maintaining the users and group relation necessary for OBIEE. So keeping the weblogic groups apart for a minute, lets deal with users and roles only.
The three users are assigned to three different roles R1, R2 and R3. By default, all the roles inherit the BIconsumer role, and localmachineusers role you mentioned is not an OTB role. This is something that is probably causing the data filtering to fail. Do a test like create a user in weblogic, assign him only to the localmachineusers role, and go to analytics, and check your roles and groups by going under my account. Make sure this role is not inheriting any other roles like BIAdministrator, BIauthor etc. So in conclusion, when one of your users login, they should inherit only their custom Role (R1 for instance), BIConsumer, Authenticated User, and your custom role localmachineusers.
petresion_Comment: That is what I checked on the first time (few days ago) and is exactly as you say (BIConsumer, localmachinerole and Role1).
Do not apply any data filters on the BIConsumer role. This is not a good practice because the filters get applied to every single user that logs into the system.
petresion_Comment: I know that, but appliyng filters on BIConsumer role I tried to make sure that its privileges doesn't overrides any of my Roles (1,2 or 3). I will remove the filter on BIConsumer.
Now create the data filters on your custom roles (R1, R2, R3). Save the RPD. Deploy the Rpd through Enterprise Manager.
petresion_Comment: Only difference in my case is that I stopped BI services, applied changes to rpd in Offline mode and then restarted BI services.But also tried as you mentioned (by the book in fact) and same result. The problem is the same, my roles(1,2,3) don't filter the companies at all.
Once you are done with all the work above, you should login into analytics as user1. After logging in go to my account, roles and groups, and make sure you see the R1 in the list of groups. Now run the report, and your filters should get applied no matter what. If they are still not getting applied, grab the physical sql and see if the filters are existing in the where condition.
petresion_Comment: Where can I capture the physical SQL (probably an MDX sent to the Essbase cube ?) ?
One other reason could be, one of the roles that are assigned to the user1 by default, is overriding the filters. Like for example, if a user is assigned to BIAdmin role, and no matter if you assign him to a different role that has 100's of filters, he will still see all of the data.
petresion_Comment: As I said before, each of my users are members of their roles, BIComsumer and localmachinerole, so no other privileges (no BIAdmin role).
Thank you for the patience.
John

Error when applying data filters on Logical Dimensional Table

I have a data filter setup on a dimension table using session variables. The session variables are getting populated in the correct way. To make sure, I created an analysis with session variables, and I see the values that I need to apply the data filters.
When I select a column from the dimensional table in the presentation services, I am getting below error.
Error getting drill information: SELECT "GL Segment3 - Office"."Region Code" saw_0 FROM "Financials - AP Overview"
Error Details:
Error Codes: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [23014] The Variable with Object ID '3031:338998' is still referenced and could not be loaded.Please have your System Administrator look at the log for more details on this error. (HY000)
SQL Issued: {call NQSGetLevelDrillability('SELECT "GL Segment3 - Office"."Region Code" saw_0 FROM "Financials - AP Overview"')}
Thanks,
-Amith.
Edited by: Amith on May 3, 2011 12:19 PM

You can go into the BI Administration tool, then go to tools. After that go to Query Repository.
In the "name" field leave the "*". Set the "type" to variable and do not establish a filter.
Once you hit query you should see all of the repository variables listed and you can see the code that is throwing you the error. Although, in my case it is throwing me a code that does not exist in this list. I'm a bit stuck as well.
Anyone?

DAQ_START FOR Multiple Channel Data

Hi dears ;
Normally we use Scan_start DAQ API to get multiple channel data but i want to get data using Daq_start for multiple channel
but i dnot want to use this api like Scan_start by giving its second parameter -1 for all channels
i want to use this api in seperate thread for each channel and i want to get the data from 8 channels simultaneously using this api.
plz send code in vc++.if the solution is not possible then send me alternate way.
Detail:
There are 8 threads they are running simultanously and every thread want to acquire data from their corresponding channel i.e thread one from channel one thread 2 from channel 2 and son...all the threads goes at the same to acquire the data and come back after one minute and this process continue untill quit the application
please tell is possible or an altenate solution for this requirement.I donot use Scan_start to get the data of all the channels in one buffer i want to get the data of each channel in its own buffer.
                                 please tell as soon as possible
                                                                         thanks
                                                                                                ajmal

Hello ajmal,
There are a couple reasons why your idea probably won't work. First, it looks like you are using Traditional (legacy) NI-DAQ functions. The Traditional NI-DAQ driver is not multi-thread capable. Meaning that only one thread will be able to access the driver at a time. Also, it is not possible with Traditional NI-DAQ or NI-DAQmx to have multiple analog input tasks running simultaneously. Is there a particular reason that you don't want to read all the channels in the same task and separate the array into a different sub-arrays for each channel?
-Alan A.

How to use ni-6008 and build a four channel data acquisition at a rate of 250 samples per channel and display all the data in a waveform chart

how to use ni-6008 and build a four channel data acquisition at a rate of 250 samples per channel and display all the data in a waveform chart

Hi kdm,
please stick in one thread for the same topic!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Data filtering not activated for ALE processing of Outbound Deliveries

Dear all,
we're currently upgrading from 4.6c to ERP 6.0 and are facing a serious problem with our IDoc interfaces:
In 4.6c, data filtering for Message Type SHP_OBDLV_SAVE_REPLICA was activated and use to extract some segments from the IDoc sent to our logistics provider.
In ERP 6.0 data filtering is not activated for SHP_OBDLV_SAVE_REPLICA and we do not know how to activate it. For some reason, we can still see the data filtering setting when we switch to "system view" in BD64 but we're not able to change it.
Checking filter settings in the old system using transactions BD60, ... we do not see any clue how data filtering or filter objects have been defined for SHP_OBDLV_SAVE_REPLICA.or in it's context
Help please - thank you very much in advance,
Martin Pluntke

Dear all,
thank you for your help. I've just realized that the former project team made a modification to object LIKP, method SAVEREPLICA in transaction BDBG and set it to "Data filtering allowed".
This setting was lost during upgrade.
Last question: When redoing this modification (I hate to do this but that's the only way to keep the interface running) and save it I get an error/warning message during generation that the definition is inconsistent. I can continue the generation or cancel it. However, the switch is activated and my filter settings suddenly appear again in BD64 (they've been there all the time, but not displayed or active).
Is there anything I've to keep in mind? Can I generate, should I ignore?
Thank you all for your help,
Martin
Edited by: Martin Pluntke on Feb 8, 2008 4:37 PM

Need help opening a Citadel data store from DIAdem.

Hi,
I was wondering if anyone can help me connect to a Citadel data store from DIAdem. I have read all the online help and can't get it to work.
On my PC, I am using DIAdem v11.1 and have Lookout v6.1 installed as a plugin. I am trying to connect to a Citadel 5 data store on a server shown in the image below, specifically the default database on HPSERVER1. The installation of MAX on HPSERVER1 tells me it has 2 versions of LabVIEW Run-Time installed, being 8.2.1 and 9.0.1 (I'm not sure if this is relevant).
When I select \\hpserver1\default_database, I then set the properties as follows:
In the Advanced section, I have the timeout set to 90 s. When I hit OK, I then get the following message, which then takes me back to the previous screen.
Any help is much appreciated,
David.
Solved!
Go to Solution.

Hi Brad,
Thanks for replying. I had a thought that maybe my Windows firewall was the problem and that turned out to be true. As in I turned it off and suddenly I could see data.
Regarding upgrading to Lookout 6.2 (which I haven't yet done), the Lookout Release Notes recommend uninstalling previous versions first. Do you know how to do this? I tried the NI License Manager, but Lookout doesn't even register (see image below). Is this normal? Neither does Lookout appear in Windows Add/Remove Programs. Yet I know it is on my PC, there is a folder <C:\Program Files\National Instruments\Lookout 6.1> full of .dll and .exe files.
By the way, what is the difference between using Lookout 6.2 and using the DIAdem Development System available at the link below. Is either one preferable?
http://joule.ni.com/nidu/cds/view/p/id/563/lang/en
Regards,
David.

Channel Data filters in DIAdem

Similar Messages

Maybe you are looking for