Channel & HD Wishlist for 2012

I'd like to see both ESPN deportes and Cartoon Network added in HD.

I think we will see it snow on the sun before Verizon actually adds any HD channel it's subscribers REALLY want. I can think of 10 HD channels they need to add, Cartoon HD being one of them. They have really fallen behind and do not seem to care at all.

Similar Messages

AEBS "Ghost" Router Issue - The Challenge for 2012 (and it's only January)

Yes, it's a bold statement to claim that I have the biggest issue so far for 2012. Why may you ask? Because I've stumped RCN (ISP), Access Media 3 (ISP), Apple Tech Support, and Cisco Tech Support. Here's the challenge for you to see if you can figure it out:
***Also, sorry for the long-winded post. I've spend over 20 hours on this issue and racked up a lot of info to share with you. So please bear with me***
I used to own a Linksys E4200 router (early 2011), which I set up using the wireless network name (for example) "wifi-box". Due to performance issues, I returned the router back to Linksys in April 2011. Shortly thereafter, I purchased a used AESB. I performed a factory reset (not a hard reset, as I know the difference between the two) before setting up my network. Things worked great from April to Dec. 2011.
On Jan. 1st, 2012, the building that I live in switched ISPs. I used to have RCN, and now have Access Media 3 (AM3). Both provide the same type of connection - cable - and both provided me with a modem (not sure the model of the one that RCN provided to me, but AM3 gave me a Surfboard 5101N...shudder). Once the transition from RCN to AM3 took place, I performed another factory reset on the AESB before setting up my my network from scratch.
Now, here's where things get start to get weird. I "Created a wireless network" on my AESB, entered in the name "wifi-box" (to keep it the same as before) as the wireless network name, and followed the rest of the steps until I updated the router. Shortly after the AESB restarted, I received a "Dual (or double) NAT" error right off the bat. Looking into the issue futher, there were now 2 wireless network names called "wifi-box"?!? Huh?!? The actual name isn't "wifi-box", but was something quite unique. So it was easy to tell that it was (once) my wireless name.
The next 5 hours were a blur of reconfiguing, resetting, unplugging, etc. anything that is connected to my network. Nothing worked. During all of this, I also switched the name of the AESB to (for example) "apple-wifi".
As a last resort, I unplugged everything - the Surfboard, the AESB, wiped all Airport Util profiles off my 2 Macs, wiped my profile off my 1 PC, shut them down, did the same for my iPhone 3G, shut off the power strip that the modem and AESB were connected to, and unscrewed the coax cable from the wall. I had a friend come over with his laptop, which he never brought over before, and had him search for a wifi signal. As you would guess, "apple-wifi" didn't appear...BUT "WIFI-BOX" WAS AVAILABLE TO CONNECT TO!!! Arrrgggg!!
At this point it seems that the profile is somewhere outside of my condo. But where???
Moving along, I used a tool called WiFi Stumbler to see if that could help shed some light on my issue. What I found was unheard of. The wirless name "wifi-box" was linked to a Linksys router. Once I discovered this, I logged into my Linksys profile (192.168.1.1) to see if it still worked. IT DID!!! However, that was short lived, because as soon as I clicked on a tab, I was booted out. On top of that, I couldn't log back in. Not sure if this is because it was looking for the Linksys router or not. Whatever the reason...it's just flat out weird.
Because the password to log into my old Linksys profile was the same, it somewhat leads me to believe that someone doesn't have the same wireless name that I do.
Over the past two days, I talked to RCN, Linksys, Apple Tech, AM3, had an AM3 tech out to look at it...no one knew what the issue was. When I talked to Apple, and they thought it might be the Surfboard. The tech said that the Surfboard is also a router, which is why the "dual NAT" error is taking place. However, I then spoke to AM3 and they told me the Surfboard was only a modem. I looked it up online, and it's just modem. Also, I was able to get rid of the "dual NAT" error, but yet I still cannot connect.
My current error msg is: "Airport has the self-assigned IP address 169.XXX.XXX.XXX and will not be able to connect to the Internet". The AirPort indicator light in my Network Preferences is orange, but the AESB indicator light is green (and is reporting no issues).
To end this, (if you're still reading), any help that you may have is greatly appreciated. Everyone I spoke to is stumped. I'm not sure where to go next from here. If you know anything, please let my know . As a quick recap, here are my current settings:
Devices:
     1) MacBook Pro (2011), OSX Lion;
     2) MacBook (2009), OSX Snow Leopard;
     3) IBM Lenovo PC, Win XP SP2
     4) iPhone 3G (iOS 4.2)
Modem:
     Former modem: unknown
     Current router: Surfboard SB5101N
Router:
     Former router: Linksys E4200 (wireless network name "wifi-box")
     Current router: AESB - Apple AirPort Extreme Base Station - Simultaneous Dual-Band MC340LL/A (wireless network name "apple-wifi")
     # of Router in my condo: 1
ISP:
     Former ISP: RCN
     Current ISP: Access Media 3
Thanks and good luck (to you and me)

Thanks Tessarax,
Thanks for the reply, and no worries about the long form answer. Yesterday, I went through your process twice (for good measure). I also unplugged/shut down everything overnight and tried it once again today. Unfortunately, the results are the same.
Me network is currently up and running, albeit a limited connection. It's still producing the "Double NAT" error. My Internet is set up as follows:
These are the settings for "apple-wifi" in the AirPort Util.:
Connect Using: Ethernet
Ethernet WAN: Automatic
Connection Sharing: Share a public IP address. ("Bridge Mode" and Distribute a range of IP addresses" cause additional errors which brings down the network. These errors include setting a DHCP beginning/ending address and no Internet connection. I tried setting the DHCP beginning/ending address several times, but the AEBS never accepts my entries.)
IP: 10.XXX.XXX.XXX
DHCP: Beginning/Ending Address: 172.XXX.XXX.XXX
DNS: 8.8.8.8, 8.8.4.4
These are the settings for "wifi-box" in the Network Preferences:
IP: 192.XXX.XXX.XXX
DNS Servers: 8.8.8.8, 8.8.4.4
Search Domains: 221am3.com
802.1X: No profiles (I deleted them)
Bypass proxy settings for these Hosts & Domains: *.local, 169.XXX/XX
Use Passive FTP Mode (PASV): checked
MAC Address: same as "apple-wifi"
These are the settings for "apple-wifi" in the Network Preferences:
IP: 172.XXX.XXX.XXX
DNS Servers: 172.XXX.XXX.XXX
Search Domains: 221am3.com
802.1X: No profiles (no profiles were avaible for "apple-wifi")
Bypass proxy settings for these Hosts & Domains: *.local, 169.XXX/XX
Use Passive FTP Mode (PASV): checked
MAC Address: same as "wifi-box"
Two new discoveries that I uncovered yesterday are as follows:
1. 802.1X (under Network Preferences): There were 3 profiles that I deleted from this tab last week. After resetting the network, they came back. Whether they were present or deleted, it didn't affect the connectivity of my network. Just mentioning that these profiles came back after deletion (I deleted them again).
2. Yesterday, the network in my building went down for a few hours. I noticed that neither "wifi-box" nor "apple-wifi" were available to connect to. This is an obvious insight, but it seems that when "wifi-box" is unavailable, "apple-wifi" is unavailable as well. However, 'wifi-box' has always been available even when "apple-wifi" is down. Sounds like my Internet signal follows this path:
AM3 > Condo building > "wifi-box" > my condo > Surfboard modem > AEBS "apple-wifi" > my devices (laptops, iPhone, Xbox, etc.)
Two new questions:
1. What is DHCP Client ID and is this something that I need to provide?
2. Could the cables that I'm using cause any problems? Here's the cable that I'm using and the connections between the devices:
CAT5: Router > AEBS
CAT5e: AEBS > MacBook Pro
CAT6: AEBS > Xbox
If there's other questions or infer that you need, please ask

Issue with Fiscal Year Varient Period modifications for 2012

Hi All,
Can you please advice how the Fiscal Year Varient modified periods be transported to different clients.
The issue is, we have 2012 Periods already setup in DEV and transported to QAS and PRD, now the clinet came up with different periods for 2012. I have modified the periods as requested and captured them in transport.
When the new transport was sent to QAS, the new periods are appended to the old periods, instead of replacing the old periods.
any help is much appreaciated.
Thanks
Shasha

Hi All,
My issue has been resolved, we figured out that we need to delete the existing calender and capture that in transport and then recreate the calender for 2012 with new periods and capture this in the same transport and this works.
Instead of deleting the existing calender we changed the values before, which is the reason it was appedning the previous periods and the new periods.
Thanks
Smitha

Why is a sender communication channel not required for IDOC and PROXY ?

Hello,
In case of IDOCs, metadata will be available in PI for the IDOCs used both at inbound and outbound.
Why is a sender communication channel is not required in case of IDOC and PROXY outbound scenarios (i.e. IDOC to File or PROXY to file ..) when a receiver channel is required for scenarios like file to IDOC or file to PROXY.
Though this might be a regular question, I am not able to find a proper reason.
Please let me know the reason for the above request.
Thanks & Regards.

You will create RFC destination in ECC , it will have details about PI system details, when ever you send IDoc, ECC will use Port and RFC destination to connect PI Integratiion engine to deliver data to PI.
But when receiver side you will create RFC destination in PI with ECC details, but to call RFC destination and Port we need medium that was the reason we create IDoc communication channel.
Even the same case for Proxy also, but HTTP deastination establish the conection between ECC and PI, but receiver side you have to create XI channel with PI integratioin engine adress to post data.
Regards,
Raj

IPhone wishlist for next update

Hi, anyone knows where to send a wishlist for the next update? :-D
I recently bought an iPhone - I am very happy with my choice, and also the update to 3.0 is very good. But I have 2 things I really wish for.....
1. Be able to change sms tones without jailbreaking
2. Hear the sms tone with headset attached - when I get a call the sound goes via iPhone speaker, but when I get a sms the sound goes into my headset?!? Strange behaviour
Message was edited by: benmie

benmie wrote:
Hi, anyone knows where to send a wishlist for the next update? :-D
I recently bought an iPhone - I am very happy with my choice, and also the update to 3.0 is very good. But I have 2 things I really wish for.....
1. Be able to change sms tones without jailbreaking
2. Hear the sms tone with headset attached - when I get a call the sound goes via iPhone speaker, but when I get a sms the sound goes into my headset?!? Strange behaviour
That is normal behaviour. The things you describe are not really important to most people. Not much chance of Apple doing it. We have the great 3.0 and people are still not happy. If you want those things you described, Get a NOKIA.

Wishlist for Raptor

I guess it's a bit late for christmas, but here's my wishlist for Raptor.
1. Statement execution statistics (autotrace).
2. Ability to browse different between different schemas without having to create a new
connection for each one.
3. Tabs are great. But opening a new tab for each stored proc clicked is pretty
annoying. Especially when you are searching through some stored procs to find
the SQL statement that your STATPACKS turned up. A CTRL toggle to open a new tab or use back existing tab will be great
4. Execution Plan is great. TKPROF would be even better.
Anyways, great first attempt. For a free product it's already way beyond what i
would expect.

Tuning will be greatly increased for 1.1.
One thing to find your code is look at the search source report. Then you could get the exact object your looking for.
-kris

Wishlist for Dreamweaver CS5 (from Adobe Website) - Don´t let ADDT die.

Wishlist for Dreamweaver CS5 from adobe site.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Hi Günter
It's been a long time since I've been here. Hope life is treating you well.
Tried a lot of other DW extensions in the mean time
None of them match the robustness of ADDT
Most are buggy, one shot ponies that miss the bigger picture of providing integrated tools for development. All I've tried are a closed shop of functions and variables that you have to navigate by hand if you want any sort of amended functionality - on the whole a pretty poor lot.
And, I've looked at many of the off the shelf offerings that Adobe had told us that are clients wanted rather than bespoke solutions.
And no, most don't want them - they still just want concise tools/interfaces that are easy to learn, use and do what THEY want them to do. Not behemoth collections of options, bells an whistles. Naturally some do and I'm happy to oblige (who wants to write a forum from scratch!). So its not clear cut either way as seemed to be implied a year or so ago.
Yes, it would be nice just to have the toolkit useable from CS5
- but as ever, the end users are out of the picture. Maybe there will be a new version, or completely new tools - that would be most welcome.
We still need good data tools. Integration with databases (none of my clients want to pull data from HTML tables - no matter how clever that is) and
CSS Style frameworks that take the grind out of positioning and styling every little item.
Gadgets and Gizmos - YUI3 looks like the one with the most backing - judging from YUI2 - have to keep and eye on that.
Let's hope Adobe have finally put back some functionality for php mysql developers with CS5
and the the wilderness that DW has been in for the last couple of years grows some strong roots
best regards
Paul Taylor

Wishlist for an Adobe made Homesite

Wishlist for an Adobe made Homesite
1 - Adobe takes the product seriously and doesn't try and use
it to push dreamweaver like Macromedia did.
2 - Adobe maintains a reasonable price for the software (well
under $100)
3 - The new version should support PHP
4 - A built in CSS editor rather than a 3rd party application
5 - PLEASE, PLEASE include the ability to lock toolbars
Homesite is a text editor with some html tags linked to
buttons and a built in FTP program. It doesn't need to be more than
that. It shouldn't be more than that.

6 - The FTP program doesn't try and connect until AFTER the
program is fully loaded. This is a HUGE problem with Homesite 5.5
that is totally avoidable. It's easy to fix... you just have to
disable your internet connection before starting the program but it
is kind of pointless to have this crash keep occuring for no
reason.

Output channel mapping problem for surround encoder

vista 64 bit
sound blaster titanium x-fi sound card
logitech 5.1 speaker set up
hello, i am trying to mix a movie i made into 5.1. when i open the surround encoder, go to the audio hardware setup and try to set my output channel mapping i only get two speakers. i have a card that supports 5.1, 5.1 speakers, and get surround sound when i play a DVD. yet audition only recognizes my left and right speaker. any help on how i get my output channel mapping set correctly?
thanks in advance!

Thank you for the info, though I admit I'm still a bit confused.
My card is a creative x-fi extreme gamer. It has 3 line out jacks and one line in jack. T Oh, here it is in the manual...thats just not good enough.
But what is the surround encoder dialog box doing, if not encoding surround mixes? The manual says I can exportsurround sound from a multitrack session.
Date: Mon, 1 Jun 2009 21:58:08 -0600
From: [email protected]
To: [email protected]
Subject: output channel mapping problem for surround encoder

US Social Security withholding rate for 2012

Hi Guys,
The US Social Security withholding rate for 2012 will change to 6.2% (from 4.2%) for the employee withholding. Our Business would be running the first payroll for 2012 on 12/22/11. The social security withholding change needs to be in the system for this payroll run. Do you know if this change is delivered via a TUB or HRSP and where exactly it has been made available?
Thank you,
Subbaiah

Hi,
The changes have been already released, it is within TUB 45 in BSI
Federal change:
Increases the maximum wage base FROM $106,800 TO $110,100.
Increases the tax rate FROM 4.2% TO 6.2%.
We have already applied and tested it, you should have them applied before the first payroll of 2012
Hope that helps,

Anyone having trouble with their calendar? I just lost 3/4 of the info I had for 2012 and 2013?

I was just adding a date into my calendar and I all of a sudden lost 75% of the info I had in there for 2012 and 2013? Any one have any ideas?

System data is the OS or operating system. That is where the recovery stays separated from the rest of the storage so that it doesn't get corrupted. It is not accessible and non-movable.

Preparing AD for 2012

Greetings,
We are getting ready to add 2012 member servers to our network. Specifically, we're adding a server to use for DFS and for file services. The 2012 server will act as the namespace server and will be the hub for some 2003 & 2008 replication partners.
There will be no 2012 Domain controllers (at this point). Based on this info, will I need to run adprep?
Thanks,
C

No, But you need to/want to if you're running FSRM (File Resource Manager) on 2012 member servers. (they log errors in the event log if the schema hasn't been extended for 2012)
See
http://social.technet.microsoft.com/Forums/windowsserver/en-US/233188f6-080f-4531-907e-c621e0a07c8d/event-id-12339-and-12344-file-server-resource-manager-failed-to-find-claim-list?forum=winserver8gen for the actual problem.
Enfo Zipper
Christoffer Andersson – Principal Advisor
http://blogs.chrisse.se - Directory Services Blog

Use audio channel strip settings for instrument channel

How can I use the library of audio channel strip settings for an an instrument channel? I use a virtual guitar (RealStrat from MusicLab) and want to apply one of those beautiful audio channel strip settings for guitars to my virtual instrument.
Best, Dietmar

This works great, thank You
Is there a way to select the next audio channel strip setting with a keyboard shortcut? I can open the channel strip setting pop up menu with the option key pressed and select "Next channel strip setting" from the pop up menu, but that's not comfortable if You want to listen through 10 or 20 settings When I use the keyboard shortcut "Next channel strip setting" the next _software instrument_ channel strip setting is loaded ...
Is there a way to make the _library display the audio channel strip settings_ for an instrument channel?
Best, Dietmar

Wanted: Multi-Channel Audio Interface for iMac & GB (USB)

I am looking for an affordable multi-channel audio interface for my iMac for use with Garageband. My goal is to playback old songs from my old computer (Atari ST) through my Yamaha gear and record the audio into GB so I can mix it. (READ: Not interested in transferring MIDI.)
My goal is to get at least 4 and ideally 6 channel/track recording in GB. I’m not sure if the multi-channel units I see, such as the Alesis MultiMix 4 or the Behringer Xenyx Q802USB send all channels to the Mac or if they mix it down to two channels first.
I’d prefer to mix all the channels in GB rather than pre-mix it. Also, I’d prefer to have 1/4” jacks; XLR would be a nice bonus. USB; since Firewire is going away and Thunderbolt is too new.
Any suggestions? I’m trying to keep this under $100. (Also, I know I can use multiple low-budget devices and aggregate them in Audio/Midi, but I do NOT want to go that route.)
Thanks.

As you imply, keeping it below $100 makes it tough.
Generally only the two channel interfaces are close to $100.
Check out Hang Times FAQ:
http://www.bulletsandbones.com/GB/Interfaces.html

PCIS9509-D1 %DAEMON-3-SYSTEM_MSG: error: channel 0: chan_read_failed for istate 3 - sshd

Hello,
We have a MDS 9509 Switch with software version NX4.1(3a) which is reporting repetitive messages as:
PCIS9509-D1 %DAEMON-3-SYSTEM_MSG: error: channel 0: chan_read_failed for istate 3 - sshd
We know that they are from SSH and we have found similar errors related to an OpenSSH bug.
The system is working OK, but those messages are very annoying.
Anybody knows if there is a solution or workaround to avoid such messages?
Thanks and regards.

Hi again,
I'm answering myself.
This problem will be solved with V5.x. Release date unknown at this moment.
In the mean time a valid workaround to avoid such messages is logging level daemon 2

Channel & HD Wishlist for 2012

Similar Messages

Maybe you are looking for