Channel index out of range
Hello,
I have an rpf sequence rendered from 3ds Max with Object ID and Z depth checked in setup.
In after effects CS4 when I choose an ID Matte and choose Object ID to isolate one of the objects I get the following error message:
"After Effects Error: Channel index out of range. (69::23)"
Whats going on?
Ok, if I understand you correctly there is a limit to how many channels AE can read from an rpf file. But I only had two "extra" channels (at 8bit), zdepth and Object ID in the rendered sequence.
I did a re-render last night at low quality and the problem is gone. Since the original sequence was rendered on different computers some of the information probably did'nt render properly later on in the sequence. I checked individual frames in the original sequence this morning and some of the frames was missing the channel information.
Confusingly, it seems AE only displays channel information about the first frame in a sequence (in the Project panel).
Thank you for making things clearer though and I'll look into the EXR-format since it seems to be a safer alternative.
Similar Messages
-
MP Error: StringIndexOutOfBoundsException: String index out of range: -1
Hi All,
We are using PI 7.1 EHP1, Where in we would like to see the capabilty of User-Module for Conversion of IDoc Messages Between Flat and XML Formats. Gone thru the blog (/people/sap.user72/blog/2005/07/04/get-into-the-zone - Part 2) and maintained the necessary NWA configurations and maintained the necessary module parameters (SAPRelease, SourceJRA, TargetDestination) in Sender File Adapter.
Now the file is not been picked by file adapter upon checking the Comm Channel Monitoring below error:
MP: exception caught with cause java.lang.StringIndexOutOfBoundsException: String index out of range -1
Any help would be highly appreciated.
Thanks in advanceHi Ramani,
I hope you must have found a solution on this, if not then kindly consider changing your source files, as this error corresponds to only one thing: i.e. DATA Issue. You need to correct the data which you providing to the module for conversion.
I faced this problem and corrected it by just correcting my test file.
Regards,
Nipun Shedhani -
Curve 8310 error Unc.Exception: string index out of range: 0
I'm getting the following error message: "Uncaught Exception: string index out of range: 0" and no way to clear that message.
Could someone help me to fix it? Actually the only way to get BB-8310 back working is remove the battery.
Thanks in adavance
Solved!
Go to Solution.Hi and Welcome to the Community!!
There's pretty much no diagnosing those -- they are the equivalent of the random errors in Windows for which tracing the root cause is fruitless. Basically, these are the last out in the programming code -- some event occurred for which there is no handler in the code. The fix is a code update that handles the event...but, again, knowing what the event is is pretty much impossible. So, there are a few things to try:
Sometimes, the code simply becomes corrupt and needs to be refreshed -- just like a reboot:
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
If it won't boot up cleanly, then you may need to try Safe Mode:
KB17877 How to start a BlackBerry smartphone in safe mode
There might be an updated code set from the carrier -- check them via this portal:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
The toughest possible cause is a badly behaving app. To find it, there are a couple of options. One is to see if you can read the log file:
Go to the home screen. Hold down the "alt" key and type 'lglg'. (You will not see anything while you type).This will bring up the log file. Scroll down (probably many pages) untill you see a line that says 'uncaught execption'. Click on this line. The name of the app will be in the info. Alternative methods for bringing up the logs are in this KB:
KB05349How to enable, access, and extract the event logs on a BlackBerry smartphone
The other method is to remove apps one at a time, waiting a while in between (I usually recommend a week), until the problem ceases...thereby discovering the offending app. Still another method is to reload the BB OS cleanly, leaving some time between adding other apps onto the BB so as to be able to determine exactly which one is the cause.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Web Analysis report error : Array Index out of range :1
while running from workspace , below error is being thrown after making few changes to the layout (e.g. moving Measures from Page to Row ) though Design for HTML setting applied.
Array Index out of range :1
These reports are running well in WA studio.
Can any one advise on this please.Array index out of range: 1The only time you will get that error is when you are accessing an elements index that is not present in the actual indexes in that array
-
Error opening web analysis report in workspace: Array index out of range:2
I am able to view this report in web analysis studio with no errors..Its only when I go to workspace and open report do I get following error: Array index out of range:2.
Any suggestions?Have you tried checking the "Design for HTML" from the Edit toolbar to see if you get any error when saving?
Do you have any advanced items on the report, as there are 4 types of differences between Studio and HTML:
- font differences, Workspace (DHTML) uses the WA Server fonts whereas WA Studio client machine fonts.
- Service Buttons are very restricted using Workspace
- Display: Tab selection, Splitter panels, Slider selection do not render in Workspace
- Cannot restrict WA Tools menu in Workspace at all, where you can in the Studio.
For exact details check out the Hyperion Web Analysis Studio User’s Guide from the Doc Library:
http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_4.htm -
String index out of range 12348
hI,
While creating external datasource i am getting error string index out of range 12348
thanksit looks like this may be posted to the incorrect forum. This is a berkeley DB forum.
thanks
mike -
String index out of range: -1 occuring while deploying a JDBC connection pool
Hi,
I'm getting the below error (Sorry for the enormity.i got it from the log file
.all nested exceptions are included)
when i deploy my connectionpool onto a weblogic 6.1
server with the following entries in the config.xml
<JDBCConnectionPool DriverName="weblogic.jdbc.mssqlserver4.Driver" InitialCapacity="4"
LoginDelaySeconds="1" MaxCapacity="10" Name="CabinBeanPool" Properties="user=sa;password=sa;"
RefreshMinutes="10" SupportsLocalTransaction="true" Targets="myserver" TestConnectionsOnRelease="true"
TestConnectionsOnReserve="true" TestTableName="CabinBeanTable" URL="weblogic:jdbc:mssqlserver4:pubs@bsl2002"
/>
The below one i think is the core exception.Rest are nested.
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
at java.lang.String.substring(String.java:1525)
at weblogic.jdbc.mssqlserver4.ConnectionInfo.<init>(ConnectionInfo.java:63)
Grateful if u could provide the solution?
####<Feb 7, 2002 3:25:47 PM IST> <Error> <JDBC> <bsl2002> <myserver> <ExecuteThread:
'8' for queue: 'default'> <system> <> <001060> <Cannot startup connection pool
"CabinBeanPool" String index out of range: -1>
####<Feb 7, 2002 3:25:47 PM IST> <Error> <Management> <bsl2002> <myserver> <ExecuteThread:
'8' for queue: 'default'> <system> <> <141001> <Error updating deployments on
target mydomain:Name=myserver,Type=Server, component mydomain:Name=CabinBeanPool,Type=JDBCConnectionPool,
deployments: old values: mydomain:Name=myserver,Type=Server>
weblogic.management.DistributedManagementException: Distributed Management [1
exceptions]
at weblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(ConfigurationMBeanImpl.java:534)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:354)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:449)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:190)
at $Proxy7.addDeployment(Unknown Source)
at weblogic.management.internal.DynamicMBeanImpl.updateDeployments(DynamicMBeanImpl.java:1448)
at weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.java:858)
at weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.java:810)
at weblogic.management.internal.ConfigurationMBeanImpl.setAttribute(ConfigurationMBeanImpl.java:288)
at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1356)
at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1331)
at weblogic.management.internal.MBeanProxy.setAttribute(MBeanProxy.java:303)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
at $Proxy19.setTargets(Unknown Source)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.console.info.FilteredMBeanAttribute.doSet(FilteredMBeanAttribute.java:89)
at weblogic.management.console.actions.mbean.DoEditMBeanAction.perform(DoEditMBeanAction.java:116)
at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:167)
at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2456)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2039)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Distributed update exception
- remote object: mydomain:Location=myserver,Name=myserver,Type=ServerConfig
- remote server: weblogic.management.internal.RemoteMBeanServerImpl@19b1ca
- actionName: addDeployment
- params: [Ljava.lang.Object;@5e474b
- signature: [Ljava.lang.String;@1aaeb5
Distributed update exception
- remote object: mydomain:Location=myserver,Name=myserver,Type=ServerConfig
- remote server: weblogic.management.internal.RemoteMBeanServerImpl@19b1ca
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
at java.lang.String.substring(String.java:1525)
at weblogic.jdbc.mssqlserver4.ConnectionInfo.<init>(ConnectionInfo.java:63)
at weblogic.jdbc.mssqlserver4.ConnectDriver.parse(ConnectDriver.java:337)
at weblogic.jdbc.mssqlserver4.ConnectDriver.acceptsURL(ConnectDriver.java:181)
at java.sql.DriverManager.getDriver(DriverManager.java:238)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.loadDriver(ConnectionEnvFactory.java:94)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.<init>(ConnectionEnvFactory.java:122)
at weblogic.jdbc.common.internal.ConnectionPool.getResourceFactory(ConnectionPool.java:691)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:610)
at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:329)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:144)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:608)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:592)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:352)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(ConfigurationMBeanImpl.java:484)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:354)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:449)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:190)
at $Proxy7.addDeployment(Unknown Source)
at weblogic.management.internal.DynamicMBeanImpl.updateDeployments(DynamicMBeanImpl.java:1448)
at weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.java:858)
at weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.java:810)
at weblogic.management.internal.ConfigurationMBeanImpl.setAttribute(ConfigurationMBeanImpl.java:288)
at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1356)
at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1331)
at weblogic.management.internal.MBeanProxy.setAttribute(MBeanProxy.java:303)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
at $Proxy19.setTargets(Unknown Source)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.console.info.FilteredMBeanAttribute.doSet(FilteredMBeanAttribute.java:89)
at weblogic.management.console.actions.mbean.DoEditMBeanAction.perform(DoEditMBeanAction.java:116)
at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:167)
at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2456)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2039)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
--------------- nested within: ------------------
weblogic.management.DeploymentException: Error creating connection pool - with
nested exception:
[java.lang.StringIndexOutOfBoundsException: String index out of range: -1]
at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:110)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:329)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:144)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:608)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:592)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:352)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(ConfigurationMBeanImpl.java:484)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:354)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:449)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:190)
at $Proxy7.addDeployment(Unknown Source)
at weblogic.management.internal.DynamicMBeanImpl.updateDeployments(DynamicMBeanImpl.java:1448)
at weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.java:858)
at weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.java:810)
at weblogic.management.internal.ConfigurationMBeanImpl.setAttribute(ConfigurationMBeanImpl.java:288)
at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1356)
at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1331)
at weblogic.management.internal.MBeanProxy.setAttribute(MBeanProxy.java:303)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
at $Proxy19.setTargets(Unknown Source)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.console.info.FilteredMBeanAttribute.doSet(FilteredMBeanAttribute.java:89)
at weblogic.management.console.actions.mbean.DoEditMBeanAction.perform(DoEditMBeanAction.java:116)
at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:167)
at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2456)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2039)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
--------------- nested within: ------------------
weblogic.management.DistributedOperationUpdateException: Error creating connection
pool - with nested exception:
[weblogic.management.DeploymentException: Error creating connection pool - with
nested exception:
[java.lang.StringIndexOutOfBoundsException: String index out of range: -1]]
at weblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(ConfigurationMBeanImpl.java:494)
at weblogic.management.internal.Con####<Feb 7, 2002 4:09:22 PM IST> <Notice>Hi Saju,
There is an error in the URL definition. It should be
jdbc:weblogic:mssqlserver4 instead of weblogic:jdbc:mssqlserver4.
Regards,
Slava Imeshev
"Saju Thomas" <[email protected]> wrote in message
news:[email protected]...
>
Hi,
I'm getting the below error (Sorry for the enormity.i got it from the logfile
all nested exceptions are included)
when i deploy my connectionpool onto a weblogic 6.1
server with the following entries in the config.xml
<JDBCConnectionPool DriverName="weblogic.jdbc.mssqlserver4.Driver"InitialCapacity="4"
LoginDelaySeconds="1" MaxCapacity="10" Name="CabinBeanPool"Properties="user=sa;password=sa;"
RefreshMinutes="10" SupportsLocalTransaction="true" Targets="myserver"TestConnectionsOnRelease="true"
TestConnectionsOnReserve="true" TestTableName="CabinBeanTable"URL="weblogic:jdbc:mssqlserver4:pubs@bsl2002"
/>
The below one i think is the core exception.Rest are nested.
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
at java.lang.String.substring(String.java:1525)
atweblogic.jdbc.mssqlserver4.ConnectionInfo.<init>(ConnectionInfo.java:63)
>
Grateful if u could provide the solution?
####<Feb 7, 2002 3:25:47 PM IST> <Error> <JDBC> <bsl2002> <myserver><ExecuteThread:
'8' for queue: 'default'> <system> <> <001060> <Cannot startup connectionpool
"CabinBeanPool" String index out of range: -1>
####<Feb 7, 2002 3:25:47 PM IST> <Error> <Management> <bsl2002> <myserver><ExecuteThread:
'8' for queue: 'default'> <system> <> <141001> <Error updating deploymentson
target mydomain:Name=myserver,Type=Server, componentmydomain:Name=CabinBeanPool,Type=JDBCConnectionPool,
deployments: old values: mydomain:Name=myserver,Type=Server>
weblogic.management.DistributedManagementException: Distributed Management[1
exceptions]
atweblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(Confi
gurationMBeanImpl.java:534)
atweblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:354)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:449)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:190)
at $Proxy7.addDeployment(Unknown Source)
atweblogic.management.internal.DynamicMBeanImpl.updateDeployments(DynamicMBean
Impl.java:1448)
atweblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.
java:858)
atweblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.
java:810)
atweblogic.management.internal.ConfigurationMBeanImpl.setAttribute(Configurati
onMBeanImpl.java:288)
atcom.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:135
6)
atcom.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:133
1)
atweblogic.management.internal.MBeanProxy.setAttribute(MBeanProxy.java:303)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
at $Proxy19.setTargets(Unknown Source)
at java.lang.reflect.Method.invoke(Native Method)
atweblogic.management.console.info.FilteredMBeanAttribute.doSet(FilteredMBeanA
ttribute.java:89)
atweblogic.management.console.actions.mbean.DoEditMBeanAction.perform(DoEditMB
eanAction.java:116)
atweblogic.management.console.actions.internal.ActionServlet.doAction(ActionSe
rvlet.java:167)
atweblogic.management.console.actions.internal.ActionServlet.doPost(ActionServ
let.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:265)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:200)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:2456)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2039)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Distributed update exception
- remote object:mydomain:Location=myserver,Name=myserver,Type=ServerConfig
- remote server: weblogic.management.internal.RemoteMBeanServerImpl@19b1ca
- actionName: addDeployment
- params: [Ljava.lang.Object;@5e474b
- signature: [Ljava.lang.String;@1aaeb5
Distributed update exception
- remote object:mydomain:Location=myserver,Name=myserver,Type=ServerConfig
- remote server: weblogic.management.internal.RemoteMBeanServerImpl@19b1ca
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
at java.lang.String.substring(String.java:1525)
atweblogic.jdbc.mssqlserver4.ConnectionInfo.<init>(ConnectionInfo.java:63)
at weblogic.jdbc.mssqlserver4.ConnectDriver.parse(ConnectDriver.java:337)
atweblogic.jdbc.mssqlserver4.ConnectDriver.acceptsURL(ConnectDriver.java:181)
at java.sql.DriverManager.getDriver(DriverManager.java:238)
atweblogic.jdbc.common.internal.ConnectionEnvFactory.loadDriver(ConnectionEnvF
actory.java:94)
atweblogic.jdbc.common.internal.ConnectionEnvFactory.<init>(ConnectionEnvFacto
ry.java:122)
atweblogic.jdbc.common.internal.ConnectionPool.getResourceFactory(ConnectionPo
ol.java:691)
atweblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:610
at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
atweblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:329)
atweblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:144)
at java.lang.reflect.Method.invoke(Native Method)
atweblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
.java:608)
atweblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:5
92)
atweblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:352)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
atweblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(Confi
gurationMBeanImpl.java:484)
atweblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:354)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:449)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:190)
at $Proxy7.addDeployment(Unknown Source)
atweblogic.management.internal.DynamicMBeanImpl.updateDeployments(DynamicMBean
Impl.java:1448)
atweblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.
java:858)
atweblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.
java:810)
atweblogic.management.internal.ConfigurationMBeanImpl.setAttribute(Configurati
onMBeanImpl.java:288)
atcom.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:135
6)
atcom.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:133
1)
atweblogic.management.internal.MBeanProxy.setAttribute(MBeanProxy.java:303)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
at $Proxy19.setTargets(Unknown Source)
at java.lang.reflect.Method.invoke(Native Method)
atweblogic.management.console.info.FilteredMBeanAttribute.doSet(FilteredMBeanA
ttribute.java:89)
atweblogic.management.console.actions.mbean.DoEditMBeanAction.perform(DoEditMB
eanAction.java:116)
atweblogic.management.console.actions.internal.ActionServlet.doAction(ActionSe
rvlet.java:167)
atweblogic.management.console.actions.internal.ActionServlet.doPost(ActionServ
let.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:265)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:200)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:2456)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2039)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
--------------- nested within: ------------------
weblogic.management.DeploymentException: Error creating connection pool -with
nested exception:
[java.lang.StringIndexOutOfBoundsException: String index out of range: -1]
at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:110)
atweblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:329)
atweblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:144)
at java.lang.reflect.Method.invoke(Native Method)
atweblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
.java:608)
atweblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:5
92)
atweblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:352)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
atweblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(Confi
gurationMBeanImpl.java:484)
atweblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:354)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:449)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:190)
at $Proxy7.addDeployment(Unknown Source)
atweblogic.management.internal.DynamicMBeanImpl.updateDeployments(DynamicMBean
Impl.java:1448)
atweblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.
java:858)
atweblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.
java:810)
atweblogic.management.internal.ConfigurationMBeanImpl.setAttribute(Configurati
onMBeanImpl.java:288)
atcom.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:135
6)
atcom.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:133
1)
atweblogic.management.internal.MBeanProxy.setAttribute(MBeanProxy.java:303)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
at $Proxy19.setTargets(Unknown Source)
at java.lang.reflect.Method.invoke(Native Method)
atweblogic.management.console.info.FilteredMBeanAttribute.doSet(FilteredMBeanA
ttribute.java:89)
atweblogic.management.console.actions.mbean.DoEditMBeanAction.perform(DoEditMB
eanAction.java:116)
atweblogic.management.console.actions.internal.ActionServlet.doAction(ActionSe
rvlet.java:167)
atweblogic.management.console.actions.internal.ActionServlet.doPost(ActionServ
let.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:265)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:200)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:2456)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2039)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
--------------- nested within: ------------------
weblogic.management.DistributedOperationUpdateException: Error creatingconnection
pool - with nested exception:
[weblogic.management.DeploymentException: Error creating connection pool -
with> nested exception:> [java.lang.StringIndexOutOfBoundsException: String index out ofrange: -1]
atweblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(Confi
gurationMBeanImpl.java:494)
at weblogic.management.internal.Con####<Feb 7, 2002 4:09:22 PM IST><Notice>
> -
Error "String index out of range:6" while opening Webi fromBI java Lauchpad
Dear All,
I have installed BO 4.0 recently. When I open BI Java Lauch Pad URL I can see Web Intelligence under the applications list. When I click it, a pop up getting opened with message " String index out of range: 6" When I click "Details" icon in the pop up, it is showing this description.
Detected from bootclasspath: C:
PROGRA~1
Java
jre7
lib
deploy.jar
Java Plug-in 10.0.0.147
Using JRE version 1.7.0-b147 Java HotSpot(TM) Client VM
User home directory = C:\Users\RT89363
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
I have tried this in a machine where i logged as a normal user. But when i open the same link from a machine where i logged as administrator, it is working fine.
Could any one help me in sorting out the issue ??
Thanks in advance.
Regards
Ravi.Hi Ravi,
the error is due to the componet JAVA(TM) 7 which is not supported.
Better to run JAVA 6, I'm running the update 33, you can download it from http://www.oracle.com/technetwork/java/javase/downloads/jre6-downloads-1637595.html
Remeber to remove JAVA &
Go to control panel --> add remove programs and remove JAVA (TM) 7.
It will solve the problem.
Ciao,
Massimo -
Error executing CFC. Parameter index out of range (2 number of parameters, which is 1)
Hi,
My CFC component is defined as:
<cffunction name="updateNote" output="false" access="remote" returntype="void" >
<cfargument name="notedetails" required="true" type="string" >
<cfargument name="notename" required="true" type="string" />
<cfquery name="qupdateNote" datasource="notes_db">
UPDATE
notes
SET
notes.notedetails=<CFQUERYPARAM CFSQLTYPE="CF_SQL_VARCHAR" VALUE="#ARGUMENTS.notedetails#">,
WHERE
notename="<CFQUERYPARAM CFSQLTYPE="CF_SQL_VARCHAR" VALUE="#ARGUMENTS.notename#">"
</cfquery>
</cffunction>
In Flash builder when I test the operation I get this error:
"There was an error while invoking the operation. Check your server settings and try invoking the operation again.
Reason: Server error Unable to invoke CFC - Error Executing Database Query. Parameter index out of range (2 > number of parameters, which is 1)."
Im really quessing that this is something small but right now its causing me to pull my hair out of my head!! Argg. Tried a bunch of things but I know thik im stuck.
Help would be very very appreciated.
ThanksCreate test.cfm along these lines:
<cfset myObj = createObject("component", "dotted.path.to.cfc.file")>
<cfset myResult = myObj.myMethod(arg=value1, etc)>
<cfdump var="#myResult#">
Or, really, you could just browse to this:
http://your.domain/path/to/your.cfc?method=yourMethod&arg1=value1 [etc]
Although I dunno which of those two approachs will give you a better error message (indeed, it might be the same).
Try both.
Adam -
Getting cryptic error while trying to post to a custom RFC from PI 7.31 single stack.
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: String index out of range: 0 (raised by system <extern>|pidevhost)
Does anyone recognize this error and/or know of detailed instructions for registering custom RFCs in PI 7.31. I could possibly have configured the target wrong but no error says so.
This is a File-->PI-->RFC scenario. The file processing is super simple and a configuration I have used successfully before. I would assume I'd get a different error if it couldn't parse the file.
JodyNot shure if you already did but try getting some details with XPI Inspector. Also increasing log level for this category might help. You also may wanna check authorization (even if this should show with a different error text) in ECC using ST01.
My guts feeling is that there is something wrong with payload / signature of RFC.
Cheers
Jens -
I am making a program which takes screenshots and uploads them to imageshack.us, I have got the following code.
import java.awt.image.BufferedImage;
import java.awt.*;
import java.io.*;
import java.net.*;
import javax.imageio.ImageIO;
public class Screenshot extends Thread {
public static void main(String[] args)
new Screenshot().start();
public void run()
try {
Robot robot = new Robot();
BufferedImage screenShot = robot.createScreenCapture(new Rectangle(
Toolkit.getDefaultToolkit().getScreenSize()));
ImageIO.write(screenShot, "PNG", new File("screenshot.png"));
String image = uploadToIs("screenshot.png");
System.out.println(image);
} catch (Exception e) {
e.printStackTrace();
private static String uploadToIs(String fffffile) {
HttpURLConnection conn = null;
DataOutputStream dos = null;
DataInputStream inStream = null;
String lineEnd = "\r\n";
String twoHyphens = "--";
String boundary = "*****";
int bytesRead, bytesAvailable, bufferSize;
byte[] buffer;
int maxBufferSize = 1 * 1024 * 1024;
String urlString = "http://www.imageshack.us";
try {
String strFilename = fffffile;
try {
FileInputStream fileInputStream = new FileInputStream(new File(
strFilename));
URL url = new URL(urlString);
conn = (HttpURLConnection) url.openConnection();
conn.setDoInput(true);
conn.setDoOutput(true);
conn.setUseCaches(false);
conn.setRequestMethod("POST");
conn.setRequestProperty("Connection", "Keep-Alive");
conn.setRequestProperty("Content-Type",
"multipart/form-data;boundary=" + boundary);
dos = new DataOutputStream(conn.getOutputStream());
dos.writeBytes(twoHyphens + boundary + lineEnd);
dos
.writeBytes("Content-Disposition: form-data; name=\"fileupload\";"
+ " filename=\"" + strFilename + "\"" + lineEnd);
dos.writeBytes(lineEnd);
bytesAvailable = fileInputStream.available();
bufferSize = Math.min(bytesAvailable, maxBufferSize);
buffer = new byte[bufferSize];
bytesRead = fileInputStream.read(buffer, 0, bufferSize);
while (bytesRead > 0) {
dos.write(buffer, 0, bufferSize);
bytesAvailable = fileInputStream.available();
bufferSize = Math.min(bytesAvailable, maxBufferSize);
bytesRead = fileInputStream.read(buffer, 0, bufferSize);
dos.writeBytes(lineEnd);
dos.writeBytes(twoHyphens + boundary + twoHyphens + lineEnd);
fileInputStream.close();
dos.flush();
dos.close();
} catch (MalformedURLException ex) {
System.out.println("Got a malformed URL:" + ex);
} catch (IOException ioe) {
System.out.println("Got an IO issue:" + ioe);
} catch (Exception e) {
System.out
.println("Sorry, could not find the file to upload. Skipping...");
try {
inStream = new DataInputStream(conn.getInputStream());
int ii;
String returnd = "";
while ((ii = inStream.read()) != -1) {
returnd += (char) ii;
int pos = returnd.indexOf("Include details");
returnd = returnd.substring(pos);
pos = returnd.indexOf("[IMG]");
returnd = returnd.substring(pos + 5);
pos = returnd.indexOf("[/IMG]");
returnd = returnd.substring(0, pos);
inStream.close();
return (returnd);
} catch (IOException ioex) {
System.out
.println("Got an IO issue from (ServerResponse): " + ioex);
return "";
}When I start the thread by doing:
new Screenshot().start();I get the String index out of range: -1 error.
StackTrace:
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
at java.lang.String.substring(Unknown Source)
at java.lang.String.substring(Unknown Source)
at Screenshot.uploadToIs(Screenshot.java:93)
at Screenshot.run(Screenshot.java:23)
But when I add a main method into that class and start the thread it runs fine.
I would appritiate help, thanks alot:)I understand that part, I was just wondering why my string isn't read when I try and start the thread from another class, but when I run this class on its own and start the thread, it runs fine..
-
Error Mapping XI: String index out of range.
Hi Experts,
I have a problem with the mapping in XI. The transformation of data is very complex (see below) for field HBKID. I'm not having understanding the process of mapping is performed for the field HBKID. The creation of the transformation was performed using the graphical method for mapping in XI for this case. I think the person who created this data transformation didn't know that could be used USER DEFINED FUNCTION. Could you explain in more detail this MAPPING?
In the test displays the message: RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ns1:ZSD000TF01/ZVBAP/item[2]/HBKID.
The message is: Exception:java.lang.StringIndexOutOfBoundsException: String index out of range: 3]
Edited by: Rafael Sá on Feb 9, 2010 10:40 PMHi Experts,
So, I've done several tests on the tab of tests with various XML and I can't understand reason of the error in MAPPING.
I'll detail a little more the problem:
The processing of the interface is made by many items.
MAPPING ERROR:
When the interface processes a first item with the information below:
CHAVE_BANCO = EMPTY
MEIO_PGTO = D
TP_CARTAO_CREDITO = EMPTY
AND a second item with the information below:
CHAVE_BANCO = 314/3705
MEIO_PGTO = W
TP_CARTAO_CREDITO = EMPTY
The error occurs: The message is: Exception:java.lang.StringIndexOutOfBoundsException: String index out of range: 3]
MAPPING OK:
But when the processing is performed inversely, the MAPPING is done correctly.
When the interface processes a first item with the information below:
CHAVE_BANCO = 314/3705
MEIO_PGTO = W
TP_CARTAO_CREDITO = EMPTY
AND a second item with the information below:
CHAVE_BANCO = EMPTY
MEIO_PGTO = D
TP_CARTAO_CREDITO = EMPTY
I don't understand logic mapping for the field HBKID. -
Could not parse XMBMessage due to Binary index out of range
I am trying to send a IDoc from SAP ERP to SAP PI. I am getting the following error during Call Adapter.
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Could not create Message from TransportMessage. Reason: com.sap.aii.af.ra.ms.api.MessagingException: com.sap.aii.af.ra.ms.api.MessagingException: Could not parse XMBMessage due to Binary index out of range: -2</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 500 with the description Internal Server Error Error while sending by HTTP (error code: 500, error text: Internal Server Error)</SAP:Stack>
The receiver Communication Chennel is a SOAP Adapter. This is adapter used for splitting messages on the Integration Server. The error has appeared after updating with SP18 on the SP19 for SAP PI 7.0
Can somebody please explain how to get rid of this error? Thanks in advance.Hi,
My messages is very small. It's 19302 byte. This problem has appeared after installation SP19.
I used note 870864 and [http://help.sap.com/saphelp_nw70/helpdata/EN/12/5dd23aaad7b3408dde3c1577fda5b3/frameset.htm] for the stoping and starting Integration Server.
Also problem has appeared with Receiver SOAP Adapter. Messages stoped in the Communication Chennal with "SOAP: call failed: java.lang.NullPointerException" errors.
What could occur? -
All -
I'm new to consuming web services in JDeveloper. I'm using Oracle JDEV 10.1.3.3/OC4J. I'm using this version since it is compatible with Oracle EBS 12.1.3. My intent is to pull data from our third party recruitment app (Success Factors) and load that data into Oracle HRIS. I'm already doing this through a .NET application. I'm converting it to be a Java Concurrent Program in EBS. The code listed below is a stub call to verify I'm on the right track. I created a JDeveloper Web Services proxy project. I'm testing it locally on my windows desktop. When I'm able to consume the service successfully, then I'll think about moving it to the EBS server.
I'm getting the following error when I invoke the following service:
HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: String index out of range: -7
End point is: https://api4.successfactors.com/sfapi/v1/soap?wsdl
Any help/assistance would be much appreciated.
Below is my code and output of my test:
package emsc.oracle.apps.emscper.sfapi.proxy;
import HTTPClient.HTTPConnection;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.IsValidSession;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.IsValidSessionResponse;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.Login;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.LoginResponse;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.LoginResult;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.Logout;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.LogoutResponse;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.SFCredential;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.SFParameter;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.Error;
import java.io.File;
import javax.xml.rpc.ServiceFactory;
import java.util.ArrayList;
import java.util.List;
import java.util.Date;
import javax.xml.ws.BindingProvider;
import javax.xml.soap.SOAPException;
import java.util.Map;
import oracle.security.ssl.OracleSSLCredential;
public class SFAPITest {
// Declare members:
private String companyId;
private String userName;
private String password;
private String developerKey;
private Date effDt;
private String greaterThanEffDt;
private String lessThanEffDt;
// Declare constants:
final static private String breakLine = "+---------------------------------------------------------------------------+";
final static private String format = "yyyy-mm-dd";
private enum ReqId {
PrimaryReq(25),
PrimaryReqCEO(26),
EmCarePrimary(27),
RTI(28),
EmCareClinical(29);
private int reqId;
private ReqId() {
private ReqId(int value) {
reqId = value;
public int getReqId() {
return reqId;
// Getters and Setters:
protected String getCompanyId() {
return this.companyId;
protected void setCompanyId(String value) {
this.companyId = value;
protected String getUserName() {
return this.userName;
protected void setUserName(String value) {
this.userName = value;
protected String getPassword() {
return this.password;
protected void setPassword(String value) {
this.password = value;
protected String getDeveloperKey() {
return this.developerKey;
protected void setDeveloperKey(String value) {
this.developerKey = value;
protected Date getEffDt() {
return this.effDt;
protected void setEffDt(Date value) {
this.effDt = value;
protected String getGreaterThanEffDt() {
return this.greaterThanEffDt;
protected void setGreaterThanEffDt(String value) {
this.greaterThanEffDt = value;
protected String getLessThanEffDt() {
return this.lessThanEffDt;
protected void setLessThanEffDt(String value) {
this.lessThanEffDt = value;
public void runProgram()
SFAPIService mySFAPIService;
String CompletionText = "";
String effDtStr2 = null;
/* Code your program logic here.
* Use getJDBCConnection method to get the connection object for any
* JDBC operations.
* Use CpContext provided commit,rollback methods to commit/rollback
* data base transactions.
* Don't forget to release the connection before returning from this
* method.
/* Call setCompletion method to set the request completion status and
* completion text.
* Status values are ReqCompletion.NORMAL,ReqCompletion.WARNING,
* ReqCompletion.ERROR.
* Use Completion text message of length 240 characters. If it is more
* than 240 then full string will appear in log file and truncated 240
* characters will be used as request completion text.
try
ServiceFactory factory = ServiceFactory.newInstance();
mySFAPIService = (emsc.oracle.apps.emscper.sfapi.proxy.SFAPIService)factory.loadService(emsc.oracle.apps.emscper.sfapi.proxy.SFAPIService.class);
SFAPI api = mySFAPIService.getSFAPI();
/// SFAPI api = new SFAPI();
//Map<String, Object> requestContext = ((BindingProvider) api).getRequestContext();
//requestContext.put(BindingProvider.SESSION_MAINTAIN_PROPERTY, true);
System.out.println("ServiceName => " + mySFAPIService.getServiceName().toString());
System.out.println("End Point => " + mySFAPIService.getServiceName().toString());
System.out.println(breakLine);
// Authentication: Login to SFAPI:
SFCredential credential = new SFCredential();
// Fake credentials being passed in for this post:
credential.setCompanyId("XXX");
credential.setUsername("XXX");
credential.setPassword("XXX");
credential.setDeveloperKey("XXX");
HTTPConnection httpsConnection = null;
OracleSSLCredential _credential = new OracleSSLCredential();
_credential.setWallet("\\\\\\C:\\Program Files\\Java\\jdk1.6.0_33\\jre\\lib\\security", "ParkEstes3");
/*System.setProperty("javax.net.ssl.trustStore","C:\\\\\OraHome_1\\jdev\\jdevbin\\jdk\\jre\\lib\\security\\keystore");
System.setProperty("javax.net.ssl.trustStorePassword","changeit");
System.out.println(System.getProperty("javax.net.ssl.trustStore"));*/
// SFParameter: Define a generic SFParameter List. This is a necessary parameter
// to invoking calls in SFAPI:
/*System.setProperty("javax.net.ssl.keyStore",
"file:\\\C:\\jdk1.4.1\\jre\\lib\\security\\client.keystore");
System.setProperty("javax.net.ssl.keyStorePassword","welcome"); */
/* System.setProperty("oracle.net.wallet_location",
"(SOURCE=(METHOD=file)(METHOD_DATA=(DIRECTORY=\\\C:\Users\dparrish\Oracle\WALLETS)))"); // (2) */
File kstore = new File("C:\\OraHome_1\\jdev\\jdevbin\\jdk\\jre\\lib\\security\\jssecacerts");
boolean exists = kstore.exists();
if (!exists) {
System.out.println("Keystore does not exist");
else {
System.out.println("Keystore does exist");
System.setProperty("javax.net.ssl.trustStore", kstore.getAbsolutePath());
System.setProperty("javax.net.ssl.trustStorePassword", "changeit");
//System.setProperty("proxySet", "false");
//System.setProperty("http.proxyHost", "127.0.0.1");
//System.setProperty("http.proxyPort", "8080");
System.out.println(kstore.getAbsolutePath());
List<SFParameter> lst = new ArrayList<SFParameter>();
SFParameter param = new SFParameter();
param.setName("");
param.setValue("");
lst.add(param);
SFParameter[] sfParam = lst.toArray(new SFParameter[lst.size()]);
Login login = new Login();
try {
login.setCredential(credential);
System.out.println("1");
login.setParam(sfParam);
System.out.println("2");
LoginResponse loginResponse = new LoginResponse();
LoginResult loginResult = new LoginResult();
try {
loginResponse = api.login(login);
catch (Exception e ) {
System.out.println(e.getMessage());
System.out.println("3");
try {
loginResult = loginResponse.getResult();
catch (Exception e ) {
System.out.println(e.getMessage());
System.out.println("4");
IsValidSession vs = new IsValidSession();
IsValidSessionResponse isValidSessionResponse = api.isValidSession(vs);
System.out.println("5");
if (isValidSessionResponse.isResult()) {
System.out.println("Session is valid");
System.out.println("Result => " + loginResult.getSessionId());
System.out.println(breakLine);
Logout logout = new Logout();
LogoutResponse logoutResponse = api.logout(logout);
if (logoutResponse.isResult()) {
System.out.println("Logout of SFAPI Successful");
else {
System.out.println("Logout of SFAPI Unsuccessful");
else {
System.out.println("Session is invalid");
List<Error> errors = new ArrayList<Error>();
for (int i = 0; i < loginResult.getError().length; i++) {
errors.add(loginResult.getError()[i]);
for (int i = 0; i < errors.size(); i++) {
System.out.println("Error Indice => " + i);
System.out.println("Error Code: => " + errors.get(i).getErrorCode());
System.out.println("Error Message: => " + errors.get(i).getErrorMessage());
System.out.println(breakLine);
} // end for loop of SFObject errors
} // end InvalidSession
catch (Exception e)
System.out.println("Session Credential Exception");
System.out.println("Exception => " + e.getMessage());
System.out.println(breakLine);
catch (Exception e)
System.out.println("Parameter List Exception");
System.out.println("Exception => " + e.getMessage());
System.out.println(breakLine);
} // end runProgram
// Constructor:
public SFAPITest() {
} // end constructor
public static void main (String args[]) {
try
SFAPITest test = new SFAPITest();
test.runProgram();
catch (Exception e) {
System.out.println("main exception => " + e.getMessage());
} // SFAPITest
Here is the output with trace:
WARNING: Unable to connect to URL: https://api4.successfactors.com:443/sfapi/v1/soap due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: String index out of range: -7
Session Credential Exception
Exception => ; nested exception is:
HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: String index out of range: -7
+---------------------------------------------------------------------------+
Process exited with exit code 0.The other end is throwing back a programming error.
That might be because you are sending incorrect data and the other end fails to validate it.
You might be able to guess based on your C# code. But, since you are using soap one generic solution is available to you.
- Get an http proxy interceptor like wireshark.
- Run it while your C# app runs, collect the http requests from that.
- Run it while running your java code, collect the http requests from that.
Compare the two. -
IDOCs (Multiple Types) Collection in BPM---string index out of range
Hi
I am following this weblog
IDOCs (Multiple Types) Collection in BPM
1.
In Step 4
Below mapping is for N:1 transformation. (Here input will be having three different types of Abstract IDOCs and target will be having Abstract Target File type)
(iv) MM_ISU_UKGAS_NOM_to_NOM_ABS"
when I tried to 3 idoc as sender and My Message Type as the receiver
I am getting the following error message
String index out of range: 0
so how can I do this message Mapping
2.
and in Step 3.
I have just mapped
Source Idoc 1 with Source Idoc 1
Source Idoc 2 with Source Idoc 2
Source Idoc 3 with Source Idoc 3
is it right way ?
thanks
manian
Edited by: manian on Dec 8, 2008 10:49 AMManian,
Multiline option should be on for receiver message .
Mapping seems to be o.k.
Regards,
Maybe you are looking for
-
Regarding Procedures and functions
can we pass a cursor,table or ref cursor to a procedure and functions and can a function return cursor,table or ref cursor to a procedure and functions?please if possible give some examples with explanations thanks in advance..
-
How GIF format is supported in XMP toolkit
Hi all, I'm new to XMP and I'm using the XMP toolkit since some weeks. I was easily managing JPEG, TIFF, PNG and PDF, but I have problems with GIF format. Documentation declares it is supported, but I didn't find BlueSquare.gif between the samples. T
-
Partition between server not in the same DMZ
Does anyone have feedbackabout using partition between differentserver in different DMZ ?
-
Syncserver fails, reset does nothing - please help!
I regularly sync my iPhone to iCal, using iTunes, however the last few days i've been unable to sync either direction. I've hard-reset my phone, rebooted, reset the sync server, and all other options I can think of (overwrite phone, etc etc). Syncser
-
Diferences in Lightroom 5 versions
I am looking at buying Lightroom 5 on eBay but it is a version that was bundled with another product. I wabred to see if there is a difference between this version and the store purchased version? The auction states that it is NIB with unused serial