Channel Management u2013 High Tech Integration
Hi All,
Right now we are working on Implementation for High Tech Channel Management. Can any one Help me How we integrate CRM with R3 for High Tech Scenarios.
As per I know when a Transmission message ( Tcode - CMS_TM ) comes in thru EDI, I need create a Delivery/Billing for credit memo request in R3 when it is released. I donu2019t know the Complete process.
My main Question is how we integrate this process with CRM to R3. Do we use CRM Middleware to do this? If so, what Replication Object we use for this in CRM. Currently I have found a Publication 'All CMS contracts (MESG)' with BDoc BUS_CMSCON_MSG will it support Channel Management High Tech scenario (Process which I mentioned above).
Kindly advise on this as I am new to High Tech Channel Management. It would be appreciated if you able to explain me the process of Resale & Claim Transmission and Price Bucket and its backend Integration Details.
Thanks in Advance
You might find some information in this document:
<a href="https://service.sap.com/~sapdownload/011000358700000876192006E">SAP High Tech - Business Suite 2005 - Master Guide</a>
Tell me if you can't download it using this link. I can mail it to you.
Regards,
Kaushal
Similar Messages
-
Question on Seeburger High Tech Adapter Message Mappings
We are currently using Seeburger 17 SP20 High Tech Adapter
It has the following X12 Message Mappings (items bolded do not have mapping documentation)
A_810_V4010_to_INVOIC02
A_850_V4010_to_I_ORDERS05
A_855_V4010_to_I_ORDERS05
A_856_V4010_to_I_DELVRY03
FunctionalAcknowledgement_to_A_997_ALL
I_INVOIC02_to_A_810_V4010
I_ORDERS05_to_A_850_V4010
I_ORDERS05_to_A_855_V4010
But only has documentation for a subset
A_850_V4010_IN_INDUSTRY.xls
A_855_V4010_OUT_INDUSTRY.xls
A_856_V4010_IN_INDUSTRY.xls
A_856_V4010_OUT_INDUSTRY.xls
I have the following questions
1) Does documentation for the other mappings exist
2) Do mappings exist for the following message types, we have requirements to use these mapping for integration with a third party logistics provider
A_8561_V4010_to_I_MBGMCR03
I_DLVRY03_to_A_850_V4010
3) Are there any mappings for A_861_V4010
Thanks in advance for your help,
Regards,
JohnHi,
1) Does documentation for the other mappings exist.
A) I dont see any mapping or documents related to that mapping in my BIC.
2) Do mappings exist for the following message types, we have requirements to use these mapping for integration with a third party logistics provider
A_8561_V4010_to_I_MBGMCR03
I_DLVRY03_to_A_850_V4010
A) I dont see that mapping exists in my BIC.
3) Are there any mappings for A_861_V4010
A) No.
I thinnk you need yo approach seeburger for the same and get the required mapping from them.
Thnx
Chirag -
ISA iviews error in Channel Management Portal for partner portal
I am getting the following error while accessing any iview which uses the GenericISAComponent or GenericICSSComponent in the Partner Portal. I am using CRM 5.0 and SAP Portal 7.0 (2004s). What configuration needs to be done in order to make ISA iviews to work? If you have a link/document to configure ISA in the partner portal, please send me. I am using SAP provided business package for channel management. Any help is appreciated.
Errors displayed in the portal:
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/specialist/com.sap.pct.crm/com.sap.pct.crm.roles/com.sap.pct.crm.partnermanagercc/com.sap.pct.crm.chm.pmc.shop_management/com.sap.pct.crm.chm.isa.pmc.product_catalog
Component Name : com.sap.pct.crm.app.channelmgmt.GenericISAComponent
The exception was logged. Inform your system administrator..
Exception id: 06:45_07/08/07_0075_13177350
See the details for the exception ID in the log file
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/specialist/com.sap.pct.crm/com.sap.pct.crm.roles/com.sap.pct.crm.partnermanagercc/com.sap.pct.crm.chm.pma.service_center/com.sap.pct.crm.chm.isa.service
Component Name : com.sap.pct.crm.app.channelmgmt.GenericICSSComponentI am still working on this one, but I think I ca help you a bit on the way.
Keywords: EP7, ISA CRM 5.0
When deploying BP for CRM in the portal the permissions on the component is set for the super_admin_role to be the owner.
If you check the super_admin_role and assigned action you will find the Action : AclSuperUser.
As a test you can assign this action, AclSuperUser, to the role you are using and it should work.
For production purposes I can not recommend to use AclSuperUser action to a normal user since this is very powerful action. I'm currentley investigation how to assign minimal permissions for the role I'm using to make the GenericICSSComponent work.
Best Regards
Jan-Erik Hov -
Seeburger High Tech Adapter Vs EDI INT AS2 adapter?
I have a couple of questions regarding Seeburger High Tech Adapters and EDI INT AS2 adapter.
1. My client wants to use EDI INT AS2 adapter for transmitting their EDI documents to their trading partner. Can we just buy the EDI INT AS2 adapter? If yes, will this include the other Seeburger modules like
Classifier, BIC, Splitter, and Functional Ack solution, and BIC Mapping Designer?
2. What is the difference in buying the Seeburger High Tech Adapters Vs EDI INT AS2 adapter?
Your help will be greatly appreciated.
Thanks.
KarmaYou could buy only the AS2 adapter. As per my knowledge, the license changes according to the adapters you buy. If you opt to buy only the AS2 adapter, then it will not include the BIC, Mapping designer etc.
-
CRM Channel Managment - released quantity update in contract
In the channel management , the claims are created throught the transaction cms_rtcm.
Which should finally update the released quantity in the contract.?
Now in this process I see only CMS table CMSD_CNT_PRD_XT getting updated.And I donot find any means by which the CRM table CRMD_CUMULATED_I is updated,
from which the released quantity is obtained.
Can anybody tell me how is the released quantity updated in this scenario?
Thanks in advance
Chitra.PTry modifying the qty thru FM CRM_SCHEDLIN_PUT_OB.
This should solve the issue.
~Kiran -
Industry Solution for High Tech Manufacturing - how to activate?
Hello,
I'm Basis consultant installing ECC 6.0 at a client site. The client company has purchased a package from SAP that includes the " SAP Industry Solution for High Tech Manufacturing ."
My question is: how is this installed? Is this part of ECC-DIMP, and thus can be activated after installation of ECC. If so, can this be activated and tested in a newly created client copy, or does the activation need to take place prior to a client copy?
If not part of ECC-DIMP, does this purchase refer to Best Practices for High Tech, which does require additional software. In this case I believe I will need to install the Baseline package for BP, then the specific BP for High Tech.
Follow-up question:
1. Could either of these be installed later, or would that break existing new configuration?
Thanks in advance for your help!
GlenHi Glen, I just saw your posting from two months back and wondered if you had gotten your answer, and if by saying that the client had purchased a package from SAP that includes the " SAP Industry Solution for High Tech Manufacturing ", did they mean SAP Best Practices for High Tech?
Please let us know if you have any questions,
Marian -
MCU Send assignment is not reflected in automatic channel management
I have discovered a problem where the MCU Send assignment, is not reflected in automatic channel management.
Can someone try this for me please, with a session that has for 'Automatic Management of Channel strips' enabled...
Press and hold 'Send' -- then push v-pot 7 for the function 'Send, destination and level' for the v-pots.
If you assign an Aux that has not been used, it will not be created automatically.
Cheers,
MattAutomatic Shared Memory Management Enabled
Total SGA Size (MB) 3840
SGA Component Current Allocation (MB)Check the value of your MEMORY_MAX_TARGET and MEMORY_TARGET setting in 11g these two parameter enable auto shared memory management.
the values of SGA_TARGET and PGA_AGGREGATE_TARGET act as minimum values for the sizes of the SGA or instance PGA if set to non-zero.
SHOW PARAMETER TARGET
http://download.oracle.com/docs/cd/B28359_01/server.111/b28310/memory003.htm#BGBJAHEJ -
Software Provider(High Tech Industry) SAP solution!!!
Hi All
I need information (domain knowledge) for Software Provider Industry under HIGH TECH. how they work , what is their business, how SAP useful for them etc etc.
if any of you having anything related to this please share ..its urgent..
regards
YogeshI am also searching for same documentation, till now I got this pdf http://www.sap.com/netherlands/industries/hightech/pdf/50055230.pdf
Regards,
Nitin -
Hi,
We have recently implemented ECC 6.0 with EhP 5. While trying to get Is-High tech componenet activated we dont see any option coming up with the same name. Can someone help me to understand how to activate this componenet?Hi,
SAP Note 1168556 - IS-HT-RN EOL
Hope this helps you.
Thanks,
Sharib -
DC crosstalk between PXI 6220 channels due to high source impedance
Dear all,
I’m trying to digitize 10 single ended signals simultaneously with the PXI 6220. The source impedance for each signal is 1.5meg which should not be problem since the input impedance is >1G. Bias currents are taken in account and give only an offset error (assuming that they are constant). Crosstalk according datasheet is -75db at 100khz which is fairly okay for my app however the source impedance is not indicated for that specification. When I acquire data (Dc voltages) from the PXI6220 i see unexpected high crosstalks (again source impedance 1.5meg). The sample rate is 200Hz and I connected only one AIGND pin to the reference of the system. I verified whether the GND is okay by connecting one input pin directly to 5V (Rout=0) . This channel indicates 5V while the others (Z=1.5meg and grouded) give non -zero value of voltages (2V). DC leakage between channels in the cabling is not verified yet.
1) Does anyone have a clue why I observe so much DC crosstalk at high source impedances.
2) Does the PXI6220 digitizer have 16 parallel channel or does it make use of an multiplexer.
3) Do I have to connect all AIGND’s to my system’s reference or is just 1 okay.
PatrickPatrick,
I think the culprit is probably the multiplexer and not the amplifier input impedance. Look at the settling time graph on page 2 of the speicifcations. At 100 ppm error (which several source impedance curves cross) the settling time increases exponentially with the source impedance. 4 us at 1kohm, 6 us at 2 kohm, 13 us at 5 kohm, and 25 us at 10 kohm. It is probably not a reasonable to extrapolate that data more than two oreders of magnitude, but it is not unreaonable to expect some problems even at your slow sampling rate.
The user manual has this to say (pg 4-7):
M Series devices are designed to have fast settling times. However, several
factors can increase the settling time which decreases the accu racy of you r
measu rements. To ensu re fast settling times, you shou ld do the following
(in order of importance):
1. Use Low Impedance Sources —To ensu re fast settling times, you r
signal sou rces shou ld have an impedance of <1 kΩ . Large sou rce
impedances increase the settling time of the NI-PGIA, and so decrease
the accu racy at fast scanning rates.
Settling times increase when scanning high-impedance signals du e to
a phenomenon called charge injection. Mu ltiplexers contain switches,
u su ally made of switched capacitors. When one of the channels, for
example channel 0, is selected in a mu ltiplexer, those capacitors
accu mu late charge. When the next channel, for example channel 1, is
selected, the accu mu lated charge leaks backward throu gh channel 1. If
the ou tpu t impedance of the sou rce connected to channel 1 is high
enou gh, the resu lting reading of channel 1 can be partially affected by
the voltage on channel 0. This effect is referred to as ghosting.
If you r sou rce impedance is high, you can decrease the scan rate to
allow the NI-PGIA more time to settle. Another option is to u se a
voltage follower circu it external to you r DAQ device to decrease the
impedance seen by the DAQ device. Refer to the KnowledgeBase
docu ment, Decreasing the Source Impedance of an Analog Input
Signal , by going to ni.com/info and entering the info code rdbbis .
A buffer per sensor is the best fix.
Lynn -
CRM channel management reporting in BW
Hi ,
what data sources are used to pull data from CRM channel management to BW.
What kind of reports are built on this and wht is the functionality.
If some one have already worked on this module ..can you please post some documents or links.
Appreciate your response.
Thanks
venkataChannel analytics provides information about how you sold an item. Which channel did you use u2014 Interaction Center (IC), Internet, a partner, or direct sales? Channel analytics answers the questions u201CHow effective was this channel?u201D and u201CWhat can you do to make it more effective?u201D For example, you can create a useful channel analytics report that shows sales broken down by channel to see how much of your business comes over the Web as opposed to direct person-to person (field) sales.
Check the link below:
[http://help.sap.com/saphelp_nw70/helpdata/en/f4/198213acabce4baa10d5705da562e7/frameset.htm] -
Difference between 8.1 Horizontal implementation and 8.1 High Tech Vertical
Hi There,
We're trying to figure out the difference between the 8.1 Horizontal implementation of Siebel and 8.1 Vertical implementation of Siebel. We mostly use the Sales and Marketing apps, I know they've introduced MDF and some different Selling/Pricing models, but what we're wondering is if the Accounts/Contacts/Oppty structure, workflows fields are significantly different between the Horizontal and the Vertical implementations.
If anyone has the High Tech Vertical implementation please let me know. We need to make this decision asap.
Thanks,
Paulomihttp://java.sun.com/docs/index.html
Greetings Koen -
Can these high tech types of effects be done in AE?
I am new to AE and want to make some high tech effects similar to what is seen in this video:
http://www.youtube.com/watch?v=8PkFnvi_XjI
Can this be done in AE? If so, are there filters that can be used to easily make the effect? Anyone aware of any tutorials to make this effect?
Thanks!Can this be done in AE?
Yes, it can.
If so, are there filters that can be used to easily make the effect?
Oh please... Not everything comes as an instant effects. Most of that is just conventional layers animated with a bit of tracking and 3D-illusions. Simply learn AE and do so by starting with the basics:
http://www.videocopilot.net/basic/
Mylenium -
Adding a management server and AD Integration
I have a management group with several management servers with AD integration. If I add a management server, will SCOM automatically add the Service Connection Point, or do I have to completely destroy my main AD container and re-run MOMAdAdmin?
Hi,
A domain administrator uses MOMADAdmin.exe to create an AD DS container for an Operations Manager management group in the domains of the computers it will manage. The AD DS security group that is specified when running MOMADAdmin.exe is granted Read
and Delete Child permissions to the container. By creating a container this way,
Operations Manager administrators are given the permission necessary to add management servers to the container and assign computers to them, without needing to be domain administrators.
For more information, please review the link below:
Using Active Directory Domain Services to Assign Computers to Operations Manager Management Groups
http://technet.microsoft.com/en-us/library/hh212922.aspx
Note:
You should plan on waiting at least 24 hours for that to be updated in AD with 2012
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
where can i find a forum with topics related to IS-High Tech.
Hi Yara,
We don't have moderators or critical mass yet for to have forums for all industry solutions.
Please post your question in the brand new General Industry Solutions forum: Industries
Once there are enough questions for an IS-High Tech forum we will create one and move the posts over.
All the best, Mark.
Maybe you are looking for
-
Enabling Portal on Real Blackberry Handsets
Hello experts Please guide me how to make available webdynpro pages to actual blackberry device.More specifically 1. Do we need to install a blackberry enterprise server having the mobile data service (MDS) installed in it? 2. Or
-
How do I set up wireless printing of my Officejet Pro 8500 on a laptop with Windows 8?
How do I set up wireless printing from my all in one Officejet Pro 8500 printer to my laptop with Windows 8?
-
Get_context_change_log retrieves no changes although turned on
Dear all, Thank you for looking into this issue. We have a complex WD ABAP application with many views, embedded views, etc. In most of the views embedded in the main view we're calling in the wddoinit the context method enable_context_change_log to
-
It it possible to call web service from SAP 4.6 c..If yes how
Hi Friends, It it possible to call web service from SAP 4.6 c..If yes how Thanks in Advance. Murali Krishna K
-
Revision: 13477 Revision: 13477 Author: [email protected] Date: 2010-01-13 05:17:10 -0800 (Wed, 13 Jan 2010) Log Message: Bug: BLZ-455 - Document client-load-balancing property in the sample config QA: No Doc: No Ticket Links: http://bugs.a