Channel parameter setting: send parameter is not saved

Is this really impossible or I am missing something?
G5 Dual 2gHz & MacBookPro 2/1.83 Mac OS X (10.4.7) 4.5 GB RAM

This is why I think "Channel Strip Setting" is a misleading labelling.
It only saves the plug-in chain, no sends, no volume, no pan, no routing (all of those are part of the real channel strip).
It´s only partially useful this way to me.
Peter

Similar Messages

Sending messages but not saving to server

Since updating to Lion I've been able to use the Mail client to access Yahoo! Mail (the free version, not Yahoo! Mail Plus) for the first time.
Mail is receiving and sending mail fine but messages composed and sent within Mail are not saving to the Yahoo! server.
Within the Preferences the "store sent messages on the server" is checked.
The Mail Connection Doctor has green lights.
I sent myself a test message using a different email address (within the mail client) which did store on the server.
Any ideas?

Chris Cox wrote:
The CS6 icons are exactly as Apple requested them.
Apple are publicly advising developers to use application and document icons which contain a pyramid of images from 16 x 16 to 1024 x 1024 pixels, the largest size being intended for Retina displays.
You have stated in another thread that the Photoshop CS6 change from previously-compliant icons of CS5 to new less-useful and non-compliant icons is because Apple requested the change in preparation for Retina.
The request is clearly illogical, therefore there seems a high probability of a communication error between Apple and Adobe, or a mistake by someone at Apple or by someone at Adobe.
Will the icons in the next Ps update be compliant with Apple's public guidelines?
https://developer.apple.com/library/mac/#documentation/UserExperience/Conceptual/AppleHIGu idelines/IconsImages/IconsImages.html#//apple_ref/doc/uid/20000967-TP6
Extract:
Provide a set of document icons in the same set of sizes you provide for your app icon. For the recommended standard- and high-resolution sizes, see Table 5-1.
As you do with your app icons, create an .icns file for your document icons. To learn more about how to create this type of file, see “Tips for Designing Icons.”
Table 5-1 App icon resource sizes
Filename
Size of canvas (in pixels)
icon_512x512@2x
1024x1024
icon_512x512
512x512
icon_256x256@2x
512x512
icon_256x256
256x256
icon_128x128@2x
256x256
icon_128x128
128x128
icon_32x32@2x
64x64
icon_32x32
32x32
icon_16x16@2x
32x32
icon_16x16
16x16
Note: PNG with an sRGB color profile is the recommended format for app icons.

Setting for Speakers Balance not saved

I have a PCI Express X-Fi Xtreme Audio. It works great, with one exception: the settings in Speakers Balance (reached either via Control Panel or via the Creative Console) are not saved between sessions.
In addition, the settings are lost whenever the sound fader is temporarily set to zero.
Re-entering the settings gets old fast, so I wondere whether there is a solution.

Hi Rao
some thing makes default medium as spaces.
Note 1072367 - No output medium identified error even if medium selected.
A Purchase Order is created with a vendor containing no default medium specified in the vendor master data. Now, even after selecting a valid output medium, the error message 'No output medium selected' does not go off
check with technical resource ? is it really internally makes SPACES (empty)
check any logic in your smartform.
if yu have time create one OSS mesaage too.
muthu

IPad2 iOS 6.1 cannot send email - password not saved

I recently upgraded to IOS 6.1 and it must have been around that time that I started receiving errors when trying to send emails. I can recieve fine, but cannot send. The error I get is "A copy has been placed in your Outbox. No password provided. Please go to Mail Account Settings and enter a password."
When I add the password to the outgoing server it verifies. I try to send and get the same message. When I go back to the server settings the password is no longer there. Why won't my password save and how can I fix this? I never used to need a password but for some reason it won't work now without it.
I was able to get it to work once from home with the password but now it won't work anywhere. If i try adding a username as well as the password it just gives me an error that the user name is invalid.
I have checked all my smtp and outgoing server settings, added multiple servers (primary, remote, etc....) and validated ports, changed my webmail password with shaw (to ensure req's for mobile access were met), tried deleting the account and setting it up again, etc... Everything short of actually restoring my ipad, which I don't want to do unless there is no other way.
Also as an FYI - I have 2 mail accounts with Shaw but use one only to send mail (in the process of removing the older one). We also just moved and cannot Shaw service at home so are with Eastlink. The Shaw account is still active and will stay active and I have added both Shaw and Eastlink Server details for outgoing mail. When I'm not home, I rely on my Bell 3G connection for data.
Its very frustrating since I no longer have any other way to email and don't have a cell phone so my main way to contact atm was via email. I am fairly certain that the issue is related to apple software and not my servers, but I'm no expert. I have read that I cannot downgrade my iOS as well.
Any ideas or suggestions are welcome.

Ya i tried that (see above). No such luck :(. Thx tho.

Mail sending Reply, but not saving reply in thread.

Over the past week an entirely new problem has cropped up.
When I send a reply to somebody, once in a while the reply message I send does not show up in the thread.
It seems like it goes out... making the mail out swoosh sound, but there is no message that gets tacked to the replied to message.
The reply does not show up in sent messages, drafts, or recovered messages.
There simply is no record of my replies.
This doesn't happen with every message so it is sporadic.
Some of the messages seem to go out because people reply that they received the message when I start a new message asking about it.
Others seem to have disappeared.
I am wondering if this is happening with others.
It seems to have happened since the last mail upgrade which I think happened in the last week or few weeks if I remember correctly.
Because of this I think I need to abandon mail and use the web interfaces for my mail programs which seem to be functioning correctly.
I am using Mountain Lion 10.8.5.
None of my mail settings has changed.
None of my mail preferences or passwords has been changed in any way.
One day it was working.... then replying became a hit or miss as to whether I could see it after I sent it and possibly whether other people received my reply or not.

Thanks for discovering this issue being connected to drafts. I have trouble with this for a couple of months as well.
Since you assume it to be connected to "drafts", I suggest to deselect "Store draft messages on the server" for your IMAP-Account. I just did this for myself, to see if it helps, and can't give you results yet. Maybe you just wanna try simultaneously. I guess, the reason for our problem could me some messy communication between Mail and the server, where one party get's confused.
Greetings
Paul

Some settings not saved in Presets file

I'd like to setup my fme environment with preset Xml files
(and with some dirty scripting hacks, we make the app load them
automatically).
Unfortunately, not all the Device settings are saved. There
is a tuner specific Settings tab whose settings are not saved. So
if I want to change the actual TV channel I have to use the GUI.
Other settings (like crossbar_input) are found in the XML file.
Is there a way to set entries that are not saved by the GUI
directly in the XML presets file and make fme use them?

What you're looking for is startup.xml, which will be in the
application data directory for the current user. On my Vista
machine, the path looks like this:
Drive:\Users\Admin\AppData\Roaming\Adobe\Flash Media
Encoder\startup.xml
that's where all of the current UI settings are stored. So
you know, startup.xml is UTF-16 encoded and it needs to stay that
way, and (for some reason) there needs to be a blank line at the
end of the file.
Hope it helps

ReportViewer Parameter area state not saved without to refresh in ie

Hi from Germany,
we have created a master detail report with 3 levels and some parameters defined. Connected are these 3 reports by drill throughs with "go to report"-actions. We use the report manager for the navigation to the reports.
For a faster go back from a detail report to its higher level report again we added links in the header with go to url actions and the expression "javascript:history.go(-1)").
It works great but in the ie (version 10 and 11, too) there is a not wanted behavior after the user has updated the parameter values and clicked on "Show report". The report is rendered now with the changed parameters fine BUT the parameter area
is still opened.
First question: Is there a way to collapse the parameter area also with the click on "Show report"-Button?
Now users close often the parameter section and drill through to the next level report. When you go from there back (history.go(-1) or also with the browsers back-button) the report before opens but again with an displayed parameter area. It forgots that users
have collapsed it before.
2nd question: It seems that the last state with the closed parameter area was not saved (in the session?). Can someone explain me why and if there is a way to solve it?
In firefox it works like we wanted. There is the parameter area collapsed automaticly after go back in history. It seems it is realy a bug in the ie.
I have found out a workaround:
when you close the parameter area in ie and click after it on the refresh-button on the reportviewer-toolbar then the collapsed state is registered and go back to this report opens it right with collapsed parameters. Also a refresh by the browser-button opens
the report with collapsed parameters.
It seems for me it is a bug, isn't it?
Kind regards
René
René

Hi René,
If I understand correctly, you want to hide the parameter area when the report render in report server. I have create a simple report to test, however, I cannot reproduce the same issue.
Based on my test, it has two situation when we go to subreport the parameter area cannot hide.
If we are use “Go to URL” action jump to the subreport, it will not hide the parameter area.
We have not pass the parameter value to the subreport, it will display the parameter area for us to choose parameter value.
If you are not above situation, we can use “Go to URL”
action to work around it. To add parameter (rc:Parameters, rc:Toolbar) in report URL to control the parameter area visibility. Please refer to the following URL:
Http://ServerName/ReportServer/Pages/ReportViewer.aspx? %2fReportFolder%2fReportName&rs:Command=Render&rc:Parameters=Collapsed
Reference:
http://blogs.msdn.com/b/jgalla/archive/2009/03/23/hiding-parameter-area-when-viewing-reports.aspx?Redirected=true
If there are any misunderstanding, please elaborate the issue for further investigation.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Parameter 1 not being set

Hi everyone,
I'm trying to delete a row from a data table and although I'm using a simple piece of code which works elsewhere I'm getting a parameter1 not set error. The problem is with cursorFirst() but I haven't got an idea why...
Anyone got a suggestion?
Thanks very much in advance...
Emma Wykes
Here's the code -
try {
log("Into the prerender about to set parameters");
editRanges_RangesDataProvider.cursorFirst();
log("**********at ranges data provider first cursor**********");
editProducts_firstRange = editRanges_RangesDataProvider.getValue("RANGES.RANGEINFOID");
log("**********got rangeinfoid**********"+editProducts_firstRange);
editRanges_rangesDD.setSelected(editProducts_firstRange);
log("**********just set rangesDD**********");
getSessionBean1().getEditRanges_RangesRowSet().setObject(1, editProducts_firstRange);
log("Just set parameter 1");
editRanges_suppliersDataProvider.cursorFirst();
editProducts_firstSupplier = editRanges_suppliersDataProvider.getValue("SUPPLIERS.SUPPLIERID");
editRanges_supplierDD.setSelected(editProducts_firstSupplier);
getSessionBean1().getEditRanges_suppliersRowSet().setObject(1, editProducts_firstSupplier);
log("Just set parameter 2");
} catch (Exception ex) {
log("Couldn't set parameters", ex);
Here's the error -
[#|2006-02-11T18:03:23.752+0000|INFO|sun-appserver-pe8.1_02|javax.enterprise.system.tools.admin|_ThreadID=29;|ADM1042:Status of dynamic reconfiguration event processing:[success]|#]
[#|2006-02-11T18:03:27.532+0000|INFO|sun-appserver-pe8.1_02|javax.enterprise.system.container.web|_ThreadID=16;|WebModule[/FocalPoint5]Into the prerender about to set parameters|#]
[#|2006-02-11T18:03:27.610+0000|SEVERE|sun-appserver-pe8.1_02|javax.enterprise.system.container.web|_ThreadID=16;|WebModule[/FocalPoint5]Couldn't set parameters
java.lang.RuntimeException: java.sql.SQLException: Statement parameter 1 not set.
     at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorRow(CachedRowSetDataProvider.java:343)
     at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorIndex(CachedRowSetDataProvider.java:300)
     at com.sun.data.provider.impl.CachedRowSetDataProvider.getRowKeys(CachedRowSetDataProvider.java:245)
     at com.sun.data.provider.impl.CachedRowSetDataProvider.cursorFirst(CachedRowSetDataProvider.java:351)
     at focalpoint1.editRangesAndSuppliers.prerender(editRangesAndSuppliers.java:577)
     at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.prerender(ViewHandlerImpl.java:860)
     at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:295)
     at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:221)
     at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
     at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
     at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
     at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
     at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at com.sun.rave.web.ui.util.UploadFilter.doFilter(UploadFilter.java:194)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:210)
     at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
     at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:161)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:132)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:185)
     at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:653)
     at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:534)
     at com.sun.enterprise.web.connector.grizzly.ProcessorTask.doTask(ProcessorTask.java:403)
     at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:55)
Caused by: java.sql.SQLException: Statement parameter 1 not set.
     at com.mysql.jdbc.ServerPreparedStatement.serverExecute(ServerPreparedStatement.java:1031)
     at com.mysql.jdbc.ServerPreparedStatement.executeInternal(ServerPreparedStatement.java:676)
     at com.mysql.jdbc.PreparedStatement.executeQuery(PreparedStatement.java:1030)
     at com.sun.sql.rowset.internal.CachedRowSetXReader.readData(CachedRowSetXReader.java:193)
     at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:950)
     at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:1410)
     at com.sun.data.provider.impl.CachedRowSetDataProvider.checkExecute(CachedRowSetDataProvider.java:1219)
     at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorRow(CachedRowSetDataProvider.java:329)
     ... 45 more
|#]

I will answer for someone looking for this answer. Actually I'm working on a search page. If you want to use CachedRowSetDataProvider for your searching page, using a parametric query on a Session Bean, then you have to add some code to the page where you have your table (or working on), defining some values in order to avoid this error. In other words, setting the parameter values at the beginning.
In my case, I'm searching over a patient's table using 3 parameters.
    public void prerender() {
     if ( this.fldCriteria.getText() == null ) {
          try {
               // This code runs the first time but not for postback requests.
               pacientesDataProvider.getCachedRowSet().setObject(1, "XX");
               pacientesDataProvider.getCachedRowSet().setObject(2, "XX");
               pacientesDataProvider.getCachedRowSet().setObject(3, "XX");
               pacientesDataProvider.refresh();
          } catch (Exception e) {
               error("Cannot set initial search value " + pacientesDataProvider.getValue(
                    "nombres"));
               log("Cannot initial search value " + pacientesDataProvider.getValue(
                    "nombres"), e);
    }You may want to use other values, it depends on what kind of data are you working on.
I hope this info helps somebody else, as help me to finish my project.

MCU Send assignment is not reflected in automatic channel management

I have discovered a problem where the MCU Send assignment, is not reflected in automatic channel management.
Can someone try this for me please, with a session that has for 'Automatic Management of Channel strips' enabled...
Press and hold 'Send' -- then push v-pot 7 for the function 'Send, destination and level' for the v-pots.
If you assign an Aux that has not been used, it will not be created automatically.
Cheers,
Matt

Automatic Shared Memory Management Enabled
Total SGA Size (MB) 3840
SGA Component Current Allocation (MB)Check the value of your MEMORY_MAX_TARGET and MEMORY_TARGET setting in 11g these two parameter enable auto shared memory management.
the values of SGA_TARGET and PGA_AGGREGATE_TARGET act as minimum values for the sizes of the SGA or instance PGA if set to non-zero.
SHOW PARAMETER TARGET
http://download.oracle.com/docs/cd/B28359_01/server.111/b28310/memory003.htm#BGBJAHEJ

POST data as parameter but not in content?

I need to send some data from a PDA to a server. This works ok via SOAP but is rather slow, so I want to use a more efficient approach: sending a custom XML directly to a servlet. For this I use the URLConnection and POST the XML directly.
The data arrives in the servlet, but I am not able to extract it from the request. For some reason it is seen als a parameter but not in the content. I have captured the actual HTTP request being sent (stripped the remaining XML):
POST /xxx/PdaOrder1Servlet HTTP/1.1
User-Agent: Java1.3.0_02
Host: localhost:8181
Accept: text/html, image/gif, image/jpeg, *; q=.2, */*; q=.2
Connection: keep-alive
Content-type: application/x-www-form-urlencoded
Content-length: 541
+<pdaorder pdaOrderNr="2" ...+
As said, this arrives at the servlet, because when I print the parameter it has the data the was sent:
DEBUG PdaOrder1Servlet.doPost(PdaOrder1Servlet.java:74) - -------------------------
DEBUG PdaOrder1Servlet.doPost(PdaOrder1Servlet.java:75) - Processing request: POST http://localhost:8181/xxx/PdaOrder1Servlet / [<pdaorder pdaOrderNr=>{"2" ...
It maps the start of the XML "<pdaorder pdaOrderNr" as the key in the parameter and the remainder of the XML document as the value. But if I try to read the data using the reader:
               BufferedReader in = new BufferedReader(request.getReader());
               String decodedString;
               while ((decodedString = in.readLine()) != null) System.out.println(decodedString);
               in.close();I get nothing. How do I access the raw content being sent in the HTTP request? Why is the content of a POST interpreted as parameters?

Sometimes typing a problem out helps: the content type of the request needed to be set to text/xml

CL_GUI_ALV_GRID-GET_SELECTED_ROWS Parameter ET_INDEX_ROWS not filled.

Hi Gurus,
I am using Two containers,
In Screen 0100 When 'DELETE'/'ADD' it will Delete/Insert records to DB Table at First Time.
But If I go forward to the next screen 0101 and then back the the 0100, at that time When I press 'DELETE'/'ADD' the functionality is not working.
In my Pgm flow
When 'DEL'.
CALL METHOD oref_alv_grid->check_changed_data
      IMPORTING
                e_valid = l_valid. - > +Filled +
CALL METHOD oref_alv_grid->get_selected_rows
      IMPORTING
                et_index_rows = lt_rows -> Not Filled, Even I dont have Debugg insite the method
Please give me a solution.
Thanks for your valuable reply.
Kanagaraja L

Hello Kanagaraja
You have made a mistake when calling the REFRESH method.
FORM delete_database_add .
DATA: lt_rows TYPE lvc_t_row,
wa_rows TYPE lvc_s_row.
DATA: lt_rows1 TYPE lvc_t_row.
DATA:t_row_no TYPE LVC_t_ROID.
    * CALL METHOD oref_alv_grid->refresh_table_display
    * EXCEPTIONS
    * finished = 1
    * OTHERS = 2.
" NOTE: Refresh clears all selections. Thus, LT_ROWS1 will always be empty !!!
CALL METHOD oref_alv_grid->get_selected_rows
IMPORTING
et_index_rows = lt_rows1[].
You may have a look at my sample report ZUS_SDN_TWO_ALV_GRIDS_2SCR. Display the first ALV list, select some rows and enter 'DETAIL' in the command window. This will lead you to the second screen from which you return via F3.
Back on the first ALV list enter 'DELETE' and all marked rows will be deleted from the list.
*& Report ZUS_SDN_TWO_ALV_GRIDS
*& Thread: CL_GUI_ALV_GRID-GET_SELECTED_ROWS Parameter ET_INDEX_ROWS not filled.
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="826287"></a>
*& Screen '0100' contains no elements.
*& ok_code -> assigned to GD_OKCODE
*& Flow logic:
* PROCESS BEFORE OUTPUT.
*    MODULE STATUS_0100.
* PROCESS AFTER INPUT.
*    MODULE USER_COMMAND_0100.
*& Screen '0200': copy of screen '0100' (for the sake of simplicity)
REPORT zus_sdn_two_alv_grids_2scr.
DATA:
gd_okcode        TYPE ui_func,
gd_repid         TYPE syrepid,
go_docking1      TYPE REF TO cl_gui_docking_container,
go_docking2      TYPE REF TO cl_gui_docking_container,
go_grid1         TYPE REF TO cl_gui_alv_grid,
go_grid2         TYPE REF TO cl_gui_alv_grid,
gs_layout        TYPE lvc_s_layo.
DATA:
gt_outtab1       TYPE STANDARD TABLE OF knb1,
gt_outtab2       TYPE STANDARD TABLE OF knvv.
*       CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
    CLASS-METHODS:
      handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
        IMPORTING
          e_row
          e_column
          es_row_no
          sender.
ENDCLASS.                    "lcl_eventhandler DEFINITION
*       CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
*   define local data
    DATA:
      ls_knb1      TYPE knb1.
    CHECK ( sender = go_grid1 ).
**    READ TABLE gt_knb1 INTO ls_knb1 INDEX e_row-index.
**    CHECK ( ls_knb1-kunnr IS NOT INITIAL ).
**    CALL METHOD go_grid1->set_current_cell_via_id
**      EXPORTING
***        IS_ROW_ID    =
***        IS_COLUMN_ID =
**        is_row_no    = es_row_no.
***   Triggers PAI of the dynpro with the specified ok-code
**    CALL METHOD cl_gui_cfw=>set_new_ok_code( 'DETAIL' ).
ENDMETHOD.                    "handle_double_click
ENDCLASS.                    "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT        * FROM knb1 INTO TABLE gt_outtab1
         WHERE bukrs = '1000'.
PERFORM init_controls.
* Display data
gs_layout-grid_title = 'Customers'.
gs_layout-sel_mode   = 'D'. " multiple row selection
CALL METHOD go_grid1->set_table_for_first_display
    EXPORTING
      i_structure_name = 'KNB1'
      is_layout        = gs_layout
    CHANGING
      it_outtab        = gt_outtab1
    EXCEPTIONS
      OTHERS           = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
gs_layout-grid_title = 'Customers Details (Sales Areas)'.
CALL METHOD go_grid2->set_table_for_first_display
    EXPORTING
      i_structure_name = 'KNVV'
      is_layout        = gs_layout
    CHANGING
      it_outtab        = gt_outtab2 " empty !!!
    EXCEPTIONS
      OTHERS           = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
gd_repid = syst-repid.
* Link the docking container to the target dynpro
CALL METHOD go_docking1->link
    EXPORTING
      repid                       = gd_repid
      dynnr                       = '0100'
*      CONTAINER                   =
    EXCEPTIONS
      OTHERS                      = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Link the docking container to the target dynpro
CALL METHOD go_docking2->link
    EXPORTING
      repid                       = gd_repid
      dynnr                       = '0200'
*      CONTAINER                   =
    EXCEPTIONS
      OTHERS                      = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* NOTE: dynpro does not contain any elements
CALL SCREEN '0100'.
* Flow logic of dynpro '0100' (does not contain any dynpro elements):
*PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
*PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*&      Form INIT_CONTROLS
*       text
* --> p1        text
* <-- p2        text
FORM init_controls .
* Create docking container
CREATE OBJECT go_docking1
    EXPORTING
      parent = cl_gui_container=>screen0
      ratio = 90
    EXCEPTIONS
      OTHERS = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create ALV grids
CREATE OBJECT go_grid1
    EXPORTING
      i_parent = go_docking1
    EXCEPTIONS
      OTHERS   = 5.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Set event handler
SET HANDLER:
    lcl_eventhandler=>handle_double_click FOR go_grid1.
* Create docking container
CREATE OBJECT go_docking2
    EXPORTING
      parent = go_docking2
      ratio = 90
    EXCEPTIONS
      OTHERS = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create ALV grids
CREATE OBJECT go_grid2
    EXPORTING
      i_parent = go_docking2
    EXCEPTIONS
      OTHERS   = 5.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " INIT_CONTROLS
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "DETAIL"
* SET TITLEBAR 'xxx'.
* Refresh display of detail ALV list
CALL METHOD go_grid2->refresh_table_display
*    EXPORTING
*      IS_STABLE      =
*      I_SOFT_REFRESH =
    EXCEPTIONS
      OTHERS         = 2.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
TRANSLATE gd_okcode TO UPPER CASE.
CASE gd_okcode.
    WHEN 'BACK' OR
         'END' OR
         'CANC'.
      CASE syst-dynnr.
        WHEN '0100'.
          SET SCREEN 0. LEAVE SCREEN.
        WHEN '0200'.
          SET SCREEN '0100'.
          LEAVE SCREEN.
      ENDCASE.
*   User has pushed button "Display Details"
    WHEN 'DETAIL'.
      PERFORM entry_show_details.
      CALL SCREEN '0200'.
      WHEN 'DELETE'.
        perform DELETE_ENTRIES.
    WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Form ENTRY_SHOW_DETAILS
*       text
* --> p1        text
* <-- p2        text
FORM entry_show_details .
* define local data
DATA:
    ls_row      TYPE lvc_s_row,
    lt_rows     type lvc_t_row,
    ls_knb1     TYPE knb1,
    lt_knb1     TYPE STANDARD TABLE OF knb1.
CALL METHOD go_grid1->get_selected_rows
    IMPORTING
      et_index_rows = lt_rows
*      et_row_no     =
LOOP AT lt_rows INTO ls_row.
    READ TABLE gt_outtab1 INTO ls_knb1 INDEX ls_row-index.
    APPEND ls_knb1 TO lt_knb1.
ENDLOOP.
IF ( lt_rows IS INITIAL ).
    REFRESH: gt_outtab2.
ELSE.
    SELECT * FROM knvv INTO TABLE gt_outtab2
        FOR ALL ENTRIES IN lt_knb1
           WHERE kunnr = lt_knb1-kunnr.
ENDIF.
ENDFORM.                    " ENTRY_SHOW_DETAILS
*&      Form DELETE_ENTRIES
*       text
* --> p1        text
* <-- p2        text
form DELETE_ENTRIES .
* define local data
DATA:
    ls_row      TYPE lvc_s_row,
    lt_rows     type lvc_t_row.
CALL METHOD go_grid1->get_selected_rows
    IMPORTING
      et_index_rows = lt_rows
*      et_row_no     =
LOOP AT lt_rows INTO ls_row.
    delete gt_outtab1 INDEX ls_row-index.
ENDLOOP.
go_grid1->refresh_table_display( ). " Mandatory !!!
endform.                    " DELETE_ENTRIES
Regards
Uwe

Microsoft Outlook 2010 The delegates settings were not saved correctly. Cannot activate Send-on-behalf-of list. You do not have sufficient permission to perform this operation on this object.

I am trying to assign delegation to a user and I receive the following message.
The delegates settings were not saved correctly. Cannot activate Send-on-behalf-of list. You do not have sufficient permission to perform this operation on this object.
We are using 2010 for the server and client. There are only specific mailboxes that this is happening for after being migrated from Lotus Notes. The user can use their mailfile fine however it is just the delegation that appears corrupted somehow.
I'm not sure how to fix this. I have checked the access through the security tab in ad and that looks fine.
Any help would be appreciated.

I did some more digging and I solved it.
This would be the solution:
In Active Directory Users and Computers
-Click on VIEW
-Click on ADVANCE FEATURES (this is important otherwise you won't see
the complete list in the next steps)
-Click on the USERS container
-Find the problem user's account
-Right mouse the account and click on PROPERTIES
-Click on the SECURITY tab
-In the top box, click on the SELF account
-In the bottom portion of the screen make sure the READ PERSONAL
INFORMATION & WRITE PERSONAL INFORMATION should both be checked for
ALLOW
If you can compare the permissions for 'SELF' with another user you probably should set them accordingly to be safe. I noticed that for the user where setting delegates (SOB) did
not work, more than those 2 permissions were missing.
Good luck!
David

Report parameter is not populated with exact value in stacked column click throughs

I have stacked column chart to show below opportunity data.
Category axis: Month of created date
Series: sales stage
Aggregate: runningvalue of revenue on sales stage group.
data set has below fields.
1. opportunity id
2. created date
3. revenue
4. sales stage.
5. Calculated field: month of created date
I have a sub report which shows the detail information for that month when I click on Stacked column. In order to achieve this i have to pass a report parameter with month of created date(calculated field) on the click action of main report.
This report parameter is not getting populated when i click on the respective stacked column because of which the sub report is failing.
Any thoughts?
1. Category: month of the created date of opportunity(this
1. Category: month of the created date of opportunity(this

Thanks Katherine for reply.
Creating a subreport was never an issue, the issue was when I click on the stacked column the parameter (A) as per your screenshot was not getting populated, some times it just passes a null value.
In my report below is the sample data and in Chart
1. Series Aggregate is on Runningvalue of Revenue set to stage scope.
2. CAtegory group is on Month of Created date
3. Series group is on Stage
4. Have a report filter for Year.
Sub report parameter: Month which is passed when I click on the stacked column.
Below is sample data how my data looks like.
id
stage
createdon
revenue
1
U
1/1/2013
1000
2
Ir
1/2/2013
2000
3
Ir
2/2/2013
1000
4
A
2/3/2013
5000
5
A
3/3/2013
1000
6
Ir
3/3/2013
5000
7
Ir
4/3/2013
7000
Below is the image of actual report
In the above screenshot When i click on Region A or Region C for Aug Column, the Month Parameter for subreport is always null. When I click on Region B , parameter is having the
value as "Aug".
Let me know is there anything I am missing.

Date parameter does not work in SharePoint 2010 report using SQL 2008 Server Reporting Service

Here is the settings:
SharePoint 2010 with SQL server 2008 reporting services configured
When create a report for a SP list using SQL server report builder (3.0) the date parameter does not work.
The data parameter is set as "date and time" type and field name equals the col name in the SP list
When run the report, the whatever dates I select, the result is always the same, so the parameters do not take any effect.
Is any step missing?
Thanks for any advice !

Hi ,
How did you configure you "date and time" type parameter and field name equals the col name in the SP list?
Have you tested if other type parameter worked?
Have you tried typing the date format as 20140722 in your date parameter filed before run the report?
http://whitepages.unlimitedviz.com/2012/02/using-sharepoint-filters-with-reporting-services-parameters-for-personalized-reports/
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Send mail not saved

I work with a couple of (imap) mail accounts. Receiving and sending mail is ok but the mail I send through those imap accounts is not saved in the directory sent items. Only the mail send by my apple account is saved.
I don't how to fix this problem? (I've tried deleting the accounts and make new accounts).
Neither Apple support or my ISP did not have a solution.
Who can help
mac book Mac OS X (10.4)

I guess I figured it out. My settings were saving sent email to server (I was really convinced this was the right setting). By changing this setting my sent mail is saved in the sent directory.
Thnx for setting my on the right track
What are your Preferences > Accounts > Mailbox
Behaviors > Sent settings?
In the Finder, go to
~/Library/Mail/IMAP-username@mailserver/
. With that folder open, do Edit > Select All
(⌘A), then Edit > Copy (⌘C), and paste it
in your reply to this post to let me see the names of
the files and folders it contains -- you may disguise
any mailbox names you wish to keep private.
Note: For those not familiarized with the
~/ notation, it refers to the user’s home
folder, i.e. ~/Library is the Library folder
within the user’s home folder.
mac book Mac OS X (10.4)

Channel parameter setting: send parameter is not saved

Similar Messages

Maybe you are looking for