Channel status up idle idle (data distorted when posted)

Show voice port on NM-HDV-2CE1 shows
PORT CH SIG-TYPE OPER IN STATUS OUT STATUS TIP RING
4/0:1 08 R2-analog up idle idle
4/0:1 09 R2-analog dorm idle idle
Can you explain the cause to this behavoir (OPER -up IN -idle OUT -idle)
and how to solve this problem ?

Did you try the debugs and got any info on this? May be you could find some solution about it in the Troubleshooting assistant (http://www.cisco.com/kobayashi/support/tac/tsa/launch_tsa.html) found on the cisco website.

Similar Messages

Idoc status 53.Yet application data is not posted.

IDOC status is 53. But application data is not partially posted.iam generating 2 idocs, one for type INFREC01 and other for COND_A01. iam Generating IDOC using a fm IDOC_INBOUND_ASYNCHRONOUS. purchase info record is posted succesfully. but condition info record is not posted.
for both the idoc its shows green status-53. moreover data in EINA EINE KONH KONP is updating, but its not displayed in transaction ME13.
Kindly help me.

Hi,
Check the config stuff if you are usng the right IDoc...See partner profiles and the message types.
thanks

FPGA compiler Server status says idle but Status says compiling VHDL

when i compile my FGPA vi file , after some time in the compile server window "Server status" shows "idle.." but the status box shows "Compiling VHDL".
It stays in this condition for a long time about 30 mins. Why is this happening? I am also attaching the screenshot of the compile server.
FPGA vi i am trying to compile is the Sine Generator.vi which was there in examples under FPGA Fundamanetals->Analysis and Controls.
Attachments:
compile server.JPG ‏59 KB

I am attaching the block diagram of the fpga vi. It is a sine generator example which was in the labview examples folder.
I am seeign this behaviour only when i compile this fpga vi. I have compiled other fpga vi's without any problem.
Attachments:
fpga vi for sine genrator.JPG ‏127 KB

Load status never idle

I have two dashboards that in the data manager both have the loading message set to 'Loading ...' and the idle message set to 'Refresh data'.
When the dashboards are loaded the 'Loading ...' message is displayed, as expected. After a time one of them will display the idle message but the other always says 'Loading ...'.
Is there a reason for this? The data is successfully loaded into both dashboards.

Simon,
As stated. Did you check to make sure that ALL of the data is loaded? In other words, are you using all of the data in the display that is being loaded such that you are able to detect when it is done, or is there certain data that is not being shown on the dashboard that is being loaded in that same WSDL?
Did you run it in QaaWS to ensure it runs fine?
2 Suggestions:
1. I would also advise putting a spreadsheet table over the area where the data is being imported in your spreadsheet, so that you can see what is being returned in real time (please ensure that you link ALL of the returning data in the Excel sheet first).
2. To gain visibility you may want to take a snapshot of the data when it loads to see what is being loaded, and ensure that all of the data is being loaded. You can do this in Excel (http://www.everythingxcelsius.com/2008/06/guru-tip-4-take-4-simple-steps-to.html). This should provide some visibility into what is being returned.
We suspect that something is causing it to hang, and its usually a piece of data that is not being used on a particular dashboard, but is included in the query that is the hold up.
Hope this helps!
Xcelsius Gurus
http://www.everythingxcelsius.com
"Xcelsius Gurus share templates, tips, reviews, tricks and much more!"

IDL compiler crashes when......

Hi,
I've found that the IDL compiler crashes when trying to compile an idl that contains
a declaration similar to the following:
struct S {
union U switch(long) {
case 1:
long a;
case 2:
short b;
} y;
The crash occurs with both NT and Solaris 8 versions of Tuxedo 8.0's $TUXDIR/bin/idl
that I've tried.
Any ideas?
Thanks,
Dave.

Dave,
Looks strange... I suggest that you open a case with BEA support.
Regards,
Peter.
David Watson wrote:
Hi,
I've found that the IDL compiler crashes when trying to compile an idl that contains
a declaration similar to the following:
struct S {
union U switch(long) {
case 1:
long a;
case 2:
short b;
} y;
The crash occurs with both NT and Solaris 8 versions of Tuxedo 8.0's $TUXDIR/bin/idl
that I've tried.
Any ideas?
Thanks,
Dave.

CPC Assurance - Not showing E1 CAS Channel status

Hello, I'm evaluating Cisco Prime Collaboration Assurance but I have some information on performance graphs that are not shown the right information, on E1 CAS Channel status, all channels are shown as idle, and I'll like to know what could be wrong with this or if some configuration could be missing to graph this data. Look at attached files.
Running CUCM version 9.1.2.12900-11, configured as H323 with Voice Gateway.
CPC Assurance version 10.5.0.49471(51383), patch version 1 installed
Any help that could help will be appreciated.
Regards,
Juan Carlos

This could be the cause.
Just try that. Also, which browser u are using ?If possible, try IE if Mozilla is being used.
Further, whencall is active , just run show isdn service in router and then, check status in Prime.
https://supportforums.cisco.com/document/12021121/monitoring-current-call-volume-gateway-using-cisco-prime-collaboration
regds,
aman

Generated Pulse waveform is distorted when I deliver the signal to the output port in the DAQmx

Problem: Generated Pulse waveform is distorted when I deliver the signal to the output port in the DAQmx.
Environment: Windows XP sp3 (32bit), Visual Studio 2010 sp1, NI-Measurement Studio 2010
Device: NI - DAQmx PCI 6251
 Analog Input: 1.00MS/s multi-channel (aggregate)
 Analog Output: 2 Channel 2.00MS/s
Reference Example: AO_ContGenVoltageWfm_IntClk / AI_ContAcqVoltageSamples_IntClk
Generated Pulse:
1) AO0 = Square Waveform /0-5V / 8KHz / 0.5㎲/sample / sample 50% Duty
2) AO1 = Square Waveform /0-5V / 8KHz / 0.5㎲/sample / (Reverse Image)
Description: I’d like to deliver the waveform stream satisfied with specified constraints to the 2 channel output port in the DAQmx. To verify accuracy of the generated waveform, I did an electrical wiring from the Analog output channel (2 channels) to the Analog Input channel (2 channels) in DAQmx. As a result of this experiment, I could get a result which has signal distortion. Since the waveform has to satisfy with both high frequency (8KHz) and very short moment interval time (△t = 0.5㎲/sample) between samples, I cannot handle some parameters of the function in the referenced VC++ example. Following formulas shows an approach to deliver the generate pulse waveform to output port satisfied with constraints.
Analog Output Channel
Frequency = 8,000 cycles/sec (constraint)
Sample per Buffer = 2,000,000 = 2*106 samples/buffer
Cycles per Buffer = 80,000 cycles/buffer
Sample per Channel = 1,000,000 = 1*106 samples/channel
 Sample Rate = Frequency * (Sample per Buffer / Cycle per Buffer)
                          = 8,000 * (2*106 / 80,000) = 2*106 samples / sec
 △t = 1 sec / 2*106 samples / sec
           = 0.5 * 10-6 sec/sample (constraint)
 Buffer Cycle = Sample Rate / Sample per Channel
                          = (2*106 samples / sec) / (1*106 samples/channel)
                          = 2 channel / sec
Analog Input Channel
Sample per Channel = 1,000,000 = 1*106 samples/channel
 Sample Rate = 1 MS/s * (2 Channel) = 5 * 105 Samples / Sec
Program Code
AO_ContGenVoltageWfm_IntClk / AI_ContAcqVoltageSamples_IntClk (VC++ Example)
Result: The proposed approach was implemented in the experiment environment (VS2010, MStudio2010). As shown in Figure 1, we could get the unsatisfied result. Although I intended to make a ‘square’ pulse wave, the result looks like ‘trapezoid’ pulse wave (Figure.1). However, there is other result which was undertaken with different parameter condition. It looks like the square shape not the trapezoid shape.
Please let me know what the conditions make the problem of signal distortion. (AO0 = Green line / AO1 = Red line)
[Figure. 1] Frequency 8000 Hz / Cycle per Buffer = 8000 Result
[Figure. 2] Frequency 1000 Hz / Cycle per Buffer = 1000 Result
Questions: Please let me know following questions.
1) Is it possible to deliver the generated pulse wave satisfied with constraints (f= 8KHz), △t = 0.5㎲/sample) to the output port without distortion using PXI 6251?
(Is it possible to solve the problem, if I use the LabView or MAX?)
2) Are there some mistakes in the proposed approach? (H/W or S/W program)
3) What is the meaning of the Cycle per Buffer?, It could effect to the result?

Hi Brett Burger,
Thanks for your reply. For your information, I have set the sampling rate as 10000 as for the sound format, I have set the bits per sample as 16 bit, the rate as 11025 and the sound quality as mono. I tried using your method by changing the sampling rate as 8K but still my program encounter the same problem.
I wish to also create a button that is able to generate a preformatted report that contains VI documentation, data the VI returns, and report properties, such as the author, company, and number of pages only when I click on the button.  I have created this in my program, but I am not sure why is it not working. Can you help troubleshoot my program. Or do you have any samples to provide me. Hope to hear from you soon.
Many thanks.
Regards,
min
Attachments:
Heart Sounds1.vi ‏971 KB

How do I get rid of distortion when playing old CDs in iTunes?

Yesterday I imported a fairly old CD into iTunes and was disappointed to find playback of the CD was so distorted it was impossible to listen to.
Here are some facts:
All my other music in iTunes still plays perfectly
The CD plays perfectly in QuickTime Player on the same machine from the same drive, so it's not a hardware or CD problem
A newer CD imported today into iTunes imported perfectly
A bit of research on the web suggests it's to do with the fact that the CD was manufactured a long time ago - the date on the disk itself is 1987.
I've upgraded to the latest version of iTunes, removed all iTunes plug-ins from my iMac (as instructed by one of the Apple iTunes troubleshooting pages) and I've also switched off Equalizer, Crossfade, Sound Enhancer and Sound Check, but none of these make any difference.
Does anyone have any other suggestions? Is it something to do with the import settings? If so, can you tell me what they should be set to?
Many thanks

Thanks for your reply. Sorry I wasn't specific about this. I get distortion in iTunes when I play straight from this particular CD and when I import it. With QuickTime, I get no distortion when I play straight from the CD, but (I hadn't tried this before but I just gave it a go) I do get distortion when I play the .m4a file created by iTunes. So presumably it's something iTunes is doing when it processes the .aiff file from the CD.
At the moment the import settings are:
Import using: AAC Encoder
Setting: High Quality (128 kbps)
with the 'Use error correction...' box checked.
I've never had to touch them before. Is there a better setting to use for importing early CDs?
Thanks.

Status 51 material document data and po data do not match(vendor)

i am using we19 to try an inbound idoc mbgmcr(receipt for po)
i put in gm_code 01
movement indicator B(goods receipt for po)
vendor 3815
PO 4500015241
PO Order Item 00030
Movement type 101
qty in unit of entry 1
iso code unit of measurement pc
on the po screen i see the po item and qty to be delivered is 75
when i run the inbound idoc i get
status 51 material document data and po data do not match(vendor) but as i say on the po inquiry screen i see the po vendor item with 75 to be delivered
what am i missing????????????????

thank you
i put in the leading zeros and got rid of that problem
now i am getting status 51
posting only possible in 2004/07 and 2004/06
but in the posting date i use 07/02/2004 i have tried several dates in the period but get the same error
any ideas?
thanks you

Default due date , payment method when posting invoice with Special G/L

Hi Gurus,
I have a question is when I am posting an invocie to a vendor (FB60), Due On date, payment method are automatically calculated based on the defaulted baseline date and the payment term in the vendor master. But when I am posting the invocie to the same vendor with Special G/L indicator, Due On date, payment method are not automatically calculated and system are expecting me to enter this date manually. Is there a way we can default this Due On date, payment thod based on payment term like it happens when posting to other invoices without Sp GL indicator ?
Thanks
Edited by: Ngoc Hoang on Nov 29, 2011 8:30 AM

Dear Ngog,
In general, special G/L transactions are used to map special processes
to be stated separately in the balance sheet.So if you use special GL
indicator, the fields relevant to payment terms (including baseline
date) are not displayed. This is not controlled by field status.
To make the fields You need ready for input for posting
with special G/L indicator, the following Customizing setting is
necessary:
Financial Accounting -> Accounts Receivable and Accounts Payable
->Business Transactions -> Outgoing Payments -> Automatic Outgoing
Payment-> Payment Method/Bank Selection -> Configure payment program ->
All company codes -> double-click on corresponding company code -> under
Vendor -> 'Sp. G/L transactions to be paid' you should enter the special
G/L indicator A,B, etc.
As explained in SAP note 4683, the only standard possibility to get the
field payment terms on creating a posting with a special G/L indicator
is by setting in the payment program configuration (trans. FBKP) for
'All company codes' for customers/vendors 'Sp. G/L transaction to be
paid'.
Mauri

Invalid data status error during the data extraction

Hi,
while extracting capacity data from the SNP Capacity view to BW. i get the "invalid data status error" and the data extraction fails.
when debugged the bad requests of the ODS object, i found that for a certain product(which has both positive and negative input and out qtys) co-product manufacturing orders were created. but this product was not marked as the co-product and functionally its fine.
how can i rectify the data extraction problem..can you advice.
Thanks,
Dhanush

Sir,
In my company for some production order status some are having "errors in cost calculation" ie "cser" .how to deal these kind of errors.

Why am I getting sound distortion when connecting iPad 2 to amplifier.

I am getting sound distortion when connecting iPad or iPod thru amplifier using AirPlay or 3.5mm to rca cables. Also the sound has far too much bass. No problems when connected in car.

It sounds like a mismatched impedence. What are you connecting to? the output from the jack is intended for headphones, and is not just an audio out.
Try turning the volume on the pad way down, and use the gain on your amp, and see if that minimizes the issue.
There is a pure audio signal for both channels on the 31 pin plug, but you would need a special cable to use it. I would bet they are available if you google. Although I have read that the 31 pin signal is not filtered like the headphone output, so while it is a pure audio output, there may be some noise in it that would need to be filtered.
Try google for a 31 pin cable. ( the input for the car is probably built to take a signal from a headphone output, while your amp may be expecting a lower power signal)

Request shows in Red status after extraction of Data from Planning area

Hi Experts,
I am extracting data from DP planning area to APO BW Info Cube. It was working fine but from last few days after extraction we are getting Red status of that request. However whatever data packages we are extracting we are getting same in to Info Cube also. But only status of that request is in Red.
I gone through step by step analysis I found "Data selection succesfully finished?" statement in Red status & rest are in green. When I gone through the details of this statement then I found Missing "Message:Selection Completed" in yellow status.
Any Idea? How do i resolve this issue?
Please advise..
Regards
Sujay

Hi Sujay,
Check the logs obtained after the extraction.
This only will tell you fare idea for you to proceed further
to resolve the error that has happened.
Also check whether the extracted data is correct by
random sampling of extracted data
Regards
R. Senthil Mareeswaran.

XI Communication Channel Status sent to email/ccms

Hi,
We need to get an alert via email/sms whenever our XI Communication Channel Status got an errors (RED) or got inactive (YELLOW). Please shed some light on this. Thanks.
Regards,
Raquel

Hi Raquel,
Let me try to clear out some things in this thread . First of all you do your alert configuration which you say you have already done. Thats good . Now you ask that you want only to monitor the communication channels and you want specific guide . Here is the specific guide.
If you have configured alerts you will know that when you create an alert rule you have the option to choose radio button where did the error occur it could be no restriction , integration engine or adapter engine. You need to choose adapter engine.
Now whenever the colour of the lights change to red. You will get your alerts.
Regards
joel
Edited by: joel trinidade on Apr 9, 2009 9:41 AM

My phone displays "Network search". Current time and date. When the SIM is inserted and when there is no sim

My phone displays "Network search". Current time and date. When the SIM is inserted and when there is no sim.

Hi, AlexKot.
Thank you for visiting Apple Support Communities.
It sounds like you are experiencing an issue with your iPhone searching for service. If you have not resolved this issue, I would recommend trying the troubleshooting steps in the article below.
If you see No Service or Searching in the status bar of your iPhone or iPad
http://support.apple.com/kb/ts4429
Cheers,
Jason H.

Channel status up idle idle (data distorted when posted)

Similar Messages

Maybe you are looking for