Channel strip inserts Logic Express 7.2.3

When I click on the inserts of an Audio Inst track channel strip I may choose Instruments from Logic Express, GarageBand, and Jam Packs 2,3 and 4. When I try this on an Audio Track the insert offers only the Logic Express and GarageBand Instruments but no Jam Packs. After reading ALL the pdf manuals and the M Sitter book, and spending 3 hours every day the last 6 months reading this forum I still don't know the current corrrect file paths for the garageBand and Logic Express 7.2.3 or the Jam Packs 2,3 and4. At the local Apple Store I was shown a version of Logic Express which had ALL these Jam Packs in BOTH types of Audio/Audio Inst tracks.
Mac Mini Mac OS X (10.4.8) M-Audio 49e USBMIDI Controller

Jam Packs contains loops and instruments, not channel strips. To view your loops go to Audio>Loop Browser. Then you will be able to view all of you JamPacks loops. Also, JamPacks contains new software instruments. To use the software instruments that come with jampacks, go to a software instrument track, then use the EXSP4 sample player as the I/O for the track. Navigate down to GarageBand and the instruments from jampacks should be there. It's not something that really stands out. It's just that it increases the number of instruments by a lot. And with the loops, you can sort out just the jampacks loops to see what it offers.
Matt

Similar Messages

Channel Strip Insert Priority...

Hello everyone!
What is the order of priority for channel strip inserts? Which one is the very first insert? Top or bottom most? It's good to know this when you're chaining dynamics and eq plugs. Thanks!

psound18 wrote:
even on pro mixing consoles it starts the signal flow at the top and works its way down. your fader being the last
Maybe that's why non-pro consoles sound so crappy, they make the sound take 90-degree turns and 180-degree flips (I can hear a phase joke coming.)

Using Platinum Voicemaster Pro Vocal Channel Strip with Logic Pro & MBox 3

Hiya,
I was wondering if you can help me please.
I have a small little home studio that I am currently building (just to record vocals mainly to instrumentals as I am singer/songwriter).
I am currently using Logic Pro 9 and MBOX Mini 3 as my midi interface but my producer who is based overseas told me to get a preamp. Many musicians have suggested I purchase Platinum Voicemaster Pro Vocal Channel Strip. CAN ANY CONFIRM WHETHER THIS WILL WORK WITH LOGIC PRO 9 AND GIVE ANY ADVICE AS TO HOW IS THE BEST WAY TO USE IT WITH LOGIC PRO 9 AND MY MBOX MINI 3?
THANK YOU SO MUCH FOR YOUR HELP.
RUSHELLA
X

Thank you both for your input. I am back on the case again, this time with a fully functioning FCB1010. Right ou of the box the pedal does successfully send volume and pan with expression pedal a and b respectively.
What I would next like to accomplish is to have exp. ped. b now control a plug-in parameter instead, the pedal range on the fuzz-wah plug-in of Logic Pro 7 for expample.
When I use Automation Quick Access to edit the assignment of ped. b as Bryan suggested, Logic appears to be receiving the info from ped. b and creating the new assignment (as indicated in the Controller Assignments window), and yet the actual functionality doesn't change, that is, ped. b continues to control pan.
Any suggestions?
Best regards, Dan
Dual 2 GHz PowerPC G5 Mac OS X (10.4.8)

How to re-order channel strip inserts?

Hi,
is there a way to re-order the inserts in a channel strip manually?
Thanks for hints
Thomas

OK, I found the answer! You have to press the apple key before clicking on the insert to move!

Create New Auxilliary Channel Strip in Logic X ? Taken Away ?

Using create new channel strip setting seems to have been removed or is it a bug ? I took the plunge only to find that a lot has changed in the new DAW. I am particularly distressed that one of the best features on Logic 9 has been removed or just DOES NOT WORK. When this feater used to allow me to create multiple AUX channels with the same BUS or have them ascend or descend. This does not seem to be the case anymore. Is anyone out there having the same issue ? In X it just spits out a channel which it should not do . It should allow you to say how many channels and where you want them routed. This seems like a backwards more for Logic. Very dissapointed.

I've got Core Audio going, and my interface is MOTU 828 mkII. My typical workflow has been with Universal Track Mode (UTM) deactivated. What I have seen is that when UTM is enabled on my sessions, the Aux channels switch from stereo to mono with the fader rotated all the way to the left.
That's what I saw when opening my session under the re-installed Logic, which defaulted to UTM enabled. So, I disabled UTM. But now, when creating new Aux strips, I get mono channels even when requesting stereo channels.
Also - typically, when I enable a bus send on an audio channel, the corresponding bus channel would appear in my Mixer. Now, that's not happening.
Thanks for your feedback thus far, Erik. - j

Restore Channel Strips in Logic Pro (9.1.8)

Hi all,
i´ve accidentally erased a channel strip setting (yeah I know, shouldn't have done this...). It is one of presets Large Spaces - Clean Room.
(IMO this is some stupid option. The descriptions sounds like deleting the setting from the song and not out of the library. Anyway.)
I am not able to set Logic Pro to the origin defaults; I reinstalled Logic, after deleting it completely and erasing all config files manually. But it does not make any changes to the library. The channel strip setting is gone.
I CAN find the file on the HD (~/library/application support/ logic/channel strip settings) that means the cst-file, but there seems no way to import it, right?
How can I restore the original channel strip setting library?
BTW: I have the new iMac without any DVD drive; so installed Logic Pro via AppStore.
Hope someone can help... thank you!
Dan

Hi
If I understand you correctly, you have deleted the Channel Strip "Clean Room", but you have a 'spare copy' in
<User> Library:Application Support:Logic:Channel Strip Settings?
Orphuune wrote:
I CAN find the file on the HD (~/library/application support/ logic/channel strip settings) that means the cst-file, but there seems no way to import it, right?
How can I restore the original channel strip setting library?
IF this is the right Setting, it should already show up in the Library, provided that it is placed in the correct (Bus) sub-folder. You could always copy/move it to the correct location for the Factory files;
Library:Application Support:Logic:Channel Strip Settings:Bus
If this is not the correct Setting File, perhaps you have used it in another project, such that you could re-save it?
CCT

"expression parameter" on buss channel strips

In MS2 I notice that buss channel strips now include "expression" CC#11 parameter now. Is there a way to filter MIDI CC#11 from the buss channel strips?
I am using a keyboard setup that produces multi MIDI channel data.
Thanks for any opinions!
Rexxsoul

Thank you for your reply.
I'm already using a foot pedal control in the layout for expression control to all soft-synth channels.
So I tried your suggestion at the Concert level, and since it's expression control also, every channel strip with expression is activated when the foot pedal is moved.
Any thoughts would be appreciated.
Thanks again!

The Use Of SPDIF In Logic Express 7?

Hey all,does anyone know if the use of spdif in logic express 7 is possible? i have a motu 2408II and it has spdif in-out but im not sure if lofig supports it or not.i dont see it in the channel input area.

Thanks for your answer. The search function was disabled due to maintenance when I posted the topic. Now it is back up running.
I understand your reply. I think it is strange it is possible to get most presets already enabled when you use that Channel Strip 'insert' on the left, but not the "bus" settings. These bus settings do make the difference.
It is ok for me to do it manually. But I'm still curious wheter it is possible to do this automatically or not. It depens on some sounds, but a very good comparision is the Orchestra Fugue Organ from the Symphonic Orchestra Jampack. This sounds far better on Garageband compared to the default settings in Logic Express. I think most people will agree with me here.
Knows someone a trick to get 100% the same settings like in GB just by choosing this sound? Or do I indeed have to set up that manually (or is there another trick to make this an automatic process)
Another solution would still be starting my arrangment in GB...
Thanks for any support!
Marius

Solo Button in Channel Strip with Red Line

Solo Button in Channel Strip with Red Line through it and it won't solo?
How'd it happen and how do you get rid of it?
Thanks!

Try This----From the Manual
Logic Pro, Express: Solo Safe mode may not remain disabled for a particular channel strip
Symptoms
In certain projects, "Solo Safe" mode for a channel strip may enable each time you load the project, even after you disable it and save the project.
Resolution
When a channel strip in Logic is "Solo Safe", it remains audible, even when other channel strips are soloed. Solo Safe is indicated by a diagonal red line through the solo button on a channel strip.
You can manually toggle the solo safe status of a channel strip by Control-clicking its solo button. There are times when you may find that a particular audio channel strip in a project reverts to solo safe mode when you load the project, even after you manually disable solo safe. Here is why that may happen and steps you can take to prevent it from occurring.
A Logic project contains a special audio channel strip used for pre-listening to audio in the Sample Edit window, Audio Bin, and Loop Browser. When you create a Logic project from one of the factory templates, this channel strip is assigned to "Audio 256". This channel strip stays in solo safe mode so that you can always preview audio. The image below shows the channel strip for a new, empty project.
If there is no audio channel strip in a project assigned to "Audio 256", Logic will use the highest-numbered available audio channel for pre-listening. When the project is loaded, that channel strip will be put into solo safe mode. You may find this happens in older projects that you open in Logic 8, or in cases where you have deleted the "Audio 256" channel strip in a Logic 8 project. To prevent this from affecting channel strips you are using in a project's arrangement, follow these steps:
Choose Window > Environment.
From the Environment window menu, choose New > Channel Strip > Auxiliary. A channel strip will appear in the environment.
Select the channel strip. It will highlight.
In the Device parameter box in the upper left of the Environment window, click the arrows to the right of "Channel" and choose Audio > Audio 256 from the menu.
Select the text tool, click on the name below the channel strip and name it "Prelisten".

Multiple ReWire Aux Strips in Logic 8?

I am running Reason 4.0 and Logic 8. How do I create unique channel strips in Logic to represent individual Reason instruments? Right now I have a Thor track, a Dr. Rex track and a Malstrom track set up in my Logic sequencer and they all work fine but they all play through the same Aux strip in my mixer window. I want to have unique Logic plug-ins assigned to each instrument's output. How would I set that up?

Logic doesn't read the patches created in Mainstage. However, you can open each channel strip setting onto an individual track in Logic then arm record them all at the same time. They should all then play at the same time.. and record the same MIDI info on each track.
I think the bus FX are the same too.. the settings can be recalled in Logic. You'd need to do it manually though, as opposed to importing the Mainstage patch and having everything configured for you.

3rd party plug-ins are not displayed in channel strip audio unit insert

I have successfully loaded several 3rd party plug-ins (Wave Masters and IK multimedia Studio Bundle) into my MacBook Pro. The files are shown in Library>Audio>Plug-ins>Components, in User>Downloads, and they appear in my Audio Unit Manager (for each the box is checked for access from Logic Pro). Yet, when I go to a channel strip to launch some of the plug-ins, the product does not show up under audio units. How do I get these plug-in files to the insert list for my audio channels? Unfortunately, I need to launch these plug-ins in order to authorize them with the vendor. I must be missing a key step, but I have not had this issue before with other 3rd party plug-ins. Thanks for any direction.

Also, I know in the case of my IK Multimedia Classic Studio Reverb, it will NOT be available from within my 3rd party plug-in list, on a MONO channel.
I need to be opening the list on a stereo track (or stereo Aux), in order to be able to select those plug-ins.
See if it's something that simple...

A problem with channel strip outputs in Logic Pro 8

I have a Power Mac G5 2.3GHz dual core processor with 2GB memory, running LogicPro 8 connected to a MOTU 2408 Mk3. I originally assigned the outputs on the individual channel strips on my Logic default work page to the individual outputs on the MOTU, (1, 2, 3, 4, etc.,) as this is the optimum configuration for the amount of channels required for the recording I do. Checking theses settings recently though, I find the menu only gives the option to set outputs to 1-2, 3-4, 5-6 & 7-8? What has happened and how can I change them back?
Thanks

Sounds like your channel strips are stereo and not mono.
Click on the little linked circle button (format button) in the bottom of the channel strip to set it's mode to MONO (single circle).
If you have effect plugins inserted on the channel strip make sure they are mono and not stereo. (Click and hold on the effect on the insert slot and choose the mono instance of the plugin from the plugin menu).
Hope that helps
R

LP 9 NOT DISPLAYING EQ or INSERTS ON OUTPUT CHANNEL STRIPS

This is odd: Logic is not displaying EQ or Inserts on some of the Stereo Output Channel Strips. Instead of "Output 1 - 2" I have a "Master Output" with no EQ or Inserts. When I check the other stereo output strips I find that only one (output 7-8) is displaying properly. How can I fix this?
Thanks!

The output is turned on, yes. This is a session I did in Logic Pro 7 and opened in LP9. Again, as I said, OUTPUT 3-4, 5-6 also do not show up properly. Only Output 7-8 shows up w/EQ and Inserts showing.
I've opened several other LP7 sessions in LP9 and not had this problem. LP9 refuses to see the output (1-2) correctly.
When I turn off "Master" in the mixer window (upper right corner buttons), nothing changes. When I turn off "Outputs", the Master disappears.

Logic Channel Strip Instruments no longer open after Logic 8 upgrade

I upgraded Logic 8.0 to 8.0.1 and now none of the preset Logic Channel strip instruments will open. I can open all of the instruments on their own no problem. But if I select something from one of their saved presets or an instrument that I've saved, it does nothing, just hangs. There's no beach ball or logic not responding. When you do force quit, it quits logic and then upon a restart of the system, the system just freezes too. This is really frustrating because I've save a lot of my own instruments and can't get to them now. This happen in a previous session and a new session started from scratch with the upgrade. I can access all of my saved audio channel strips. Has anyone encountered this? One more bit of frustration and impediment to my work flow. Thanks, Jeff.

I've also trouble with that Channel Strips. I've saved and closed a Song with some Mastering-Plugs in the Output 1-2 ( also Stereo Sum ) and after I reloaded that song, there wasn't no Plug anymore. So all my work was gone and I am also very frustrated.
The next big Problem is working with folders. I've in most of my songs folder of MIDI and Singers and when I am working with this songs on Logic 8, I got many failure in the view of waveforms and regions.
Sometimes regions doesn't play anymore when I switched between folders in the song. That nervs me up the whole time ...
Maybe someone can help or can tell me that's why we get ProKit 4.5

How do I move previous Channel Strip Settings from Logic 9 to Logic X?

Hello,
I made the jump from Logic 9 to Logic X and I had previous Channel Strip Settings on the 9. I did the yourhomefolder/library/applicationsupport/logic copy and pasted it in the new folders on my HD (exact same place), but they're not showing up. I only get the 'Legacy' option when trying to inset a Channel Strip I had before.
Does anyone know how to do this successfully?
Thanks.

Banks,
Indeed..
However, I would retain the LP9 app as firstly it's fairly small so you don't save much space by deleting it...and secondly, you might need it to work on older or new projects that still use 32bit only plugins as they are no longer supported in Logic Pro X
Cheers..

Channel strip inserts Logic Express 7.2.3

Similar Messages

Maybe you are looking for