Channel Strip Settings Menu

Logic 7.2.3
on page 272 of the logic reference manual it says "if you click on the word Insert on any channel strip, the channel strip settings menu opens."
unfortunatley that does'nt happen for me.
any thoughts?
dual g4 Mac OS X (10.4.6)

yeah ive tried in all those instances
the only point of note was that when clicking and holding on the arrange channel strip, the little timer watch icon appeared in place of the cursor for a second. the cursor then returned to the arrow
this problem continues to annoy greatly and any help would be much appreciated
thanks

Similar Messages

Channel Strip Settings missing 'Legacy' option

I am missing a large amount of options from my Channel strip settings drop down menu, a normal click gives me the following on a software instrument channel:
When I hold alt and click I get the following:
I am not being given the option 'Legacy' or other options I have seen being used from this menu. Is there a way to customise what options you can have in this menu, and if so where can I edit them?

I´m having the same issue.

Use audio channel strip settings for instrument channel

How can I use the library of audio channel strip settings for an an instrument channel? I use a virtual guitar (RealStrat from MusicLab) and want to apply one of those beautiful audio channel strip settings for guitars to my virtual instrument.
Best, Dietmar

This works great, thank You
Is there a way to select the next audio channel strip setting with a keyboard shortcut? I can open the channel strip setting pop up menu with the option key pressed and select "Next channel strip setting" from the pop up menu, but that's not comfortable if You want to listen through 10 or 20 settings When I use the keyboard shortcut "Next channel strip setting" the next _software instrument_ channel strip setting is loaded ...
Is there a way to make the _library display the audio channel strip settings_ for an instrument channel?
Best, Dietmar

Hidden/cannot locate user channel strip settings

How do I "Unhide" the Performance folder and custom channel strip settings in Finder? I can see them when I save a preset, but cannot access them manually.

Hi
They are in a 'Hidden' folder in the UserLibrary directory.
The quiclkest way to get there is using the Finder:Go. Hold down Option to see the <User>:Library in the Go menu.
I then add that to the sidebar in the Finder window
CCT

Re: Shared Channel Strip settings, Plug-in settings...

Hi all,
Has anyone gotten into shared Channel Strip settings and Plug-in settings? I read that there are multiple ways of doing this (bonjour). Just wondering if there are any good places on the net that anyone knows of.
I know it's always best to make settings to work with whatever material you're working on but I would like to hear/see what others are doing or to have a point of reference. Plus, I wouldn’t mind getting a good slap back delay. Or some solid synth leads...

Hey Jorge,
Thanks for the reply - yep, it's cool to be able to save strip settings for aux strips and for the main out as well, to make "my" sound and keep my songs consistent.
However there are some really great pre-set settings for these strips. They can be accessed the "slow" way by holding the "Setting" box at the top of the strip, and then choosing a category and from there a preset.
But I really want to be able to go through these preset strips quickly by using the Library... you can do this for normal audio channels, and it's great to say be able to click through "bass" presets one after the other while your bass audio track is playing...
But for the aux and settings strips, I can't get the "settings" to show up as a list in the Library...
Does anyone know how this is done?!
Cheers and thanks,
Mike

How do I move previous Channel Strip Settings from Logic 9 to Logic X?

Hello,
I made the jump from Logic 9 to Logic X and I had previous Channel Strip Settings on the 9. I did the yourhomefolder/library/applicationsupport/logic copy and pasted it in the new folders on my HD (exact same place), but they're not showing up. I only get the 'Legacy' option when trying to inset a Channel Strip I had before.
Does anyone know how to do this successfully?
Thanks.

Banks,
Indeed..
However, I would retain the LP9 app as firstly it's fairly small so you don't save much space by deleting it...and secondly, you might need it to work on older or new projects that still use 32bit only plugins as they are no longer supported in Logic Pro X
Cheers..

Creating Folders in the Library for Channel Strip Settings?

When I 'Save Channel Strip Setting As', the new setting appears in my Library of Channel Strip Settings, but I want to create a folder of 'Custom Settings' so I don't get bogged down with a bunch of free-floating settings in my Library. How can I do this? Thanks!

Just figured it out. But in case you're reading this and having the same problem here is what I did...
In finder I went to the following location :
User/Library/Application Support/Logic/ChannelStripSettings/Instrument
in the 'Instrument' folder I created a new folder and titled it Custom Settings, then moved my settings to that folder. Now in my Logic Channel Strip Setting Library looks much cleaner!

I can't access my newest channel strip settings in Logic 8

Hello all. I am running Logic 8.0.2. I have several channel strip settings saved from my move from Logic 7 to 8. I noticed that when I save new channel strip settings now, that they show up in the proper folders on my Mac, but do not show up in my lists in the media bin on the right, or when you click on the "setting" button all the way on the left for the fader you are loading an instrument on. I did click "reset channel strip" which just resets the strip, and tried refresing the library under the media panel on the right. I have looked at some other forums as well, and I'm not sure if this particular issue has been answered but I haven't seen it yet (apologies if I'm repeating from a past post). Please let me know if there is something I can do...it seems like it should be something simple, like just a "refresh" somewhere, but they still don't show up. Thanks to all for your help!

i have the same problem with my iphone 4.and when synching with itunes it says "can't synch contacts with iphone because iphone is using contacts. close contacts on iphone and synch again."

Channel strip settings - import

Hi,
Is there a way to import channel strip settings between projects with the same amounts of track, (as i import for example transform sets)?
Thanks,
K.

Don't get me started...
The short answer is no. Not multiple channel strips. You cold always save them, one by one, by one...
Or go back to version 7, where this took all of 15 seconds to do between two songs, from the Audio Configuration window, which was removed in version 8, because, and I quote - "it was no longer needed".

Downloadable Channel strip settings

Does anyone know where there might be a website for downloadable Channel Strip settings?
Thanks

http://www.logicprofiles.com/
They might be dated, give it a check.

Why can't I save inputs, outputs, or colors with Channel Strip settings? :(

I am really just starting to embrace the library for Channel Strip settings - I love that it saves the plug-ins and cusotm Icons, but I kind of thought it would make sense for everything to be saved, no?
I would like to choose a Channel Strip and have it show up with the I/O routing and a saved color. Is this possible and I am just missing it?

You may be hitting a bug. On my system, when I double-click a bin, the new instance of the Project panel inherits the column layout from the current instance. A screen capture video may help get a better handle on what you're seeing.
like a feature request to be able to save Project Panel column order independent of the saved workspace.
If I'm just misunderstanding and PPro is behaving as expected, then you have two options:
Have each user save a workspace with their own particular panel layout and a common column order. Then, after taking hand-off of the project, select the preferred workspace.
when the project is handed off, have the recipient enable the "Import Workspace from Projects" option in order to get the column layout (Window>Workspaces), then move the panels around as desired.

How to import downloaded channel strip settings

hey guys just downloaded some new dubstep channel strip settings for the ES2 synth but cant find a way to import them in logic express 9. Thanks!!

Hi
Settings files for Channel Strips and Plugin settings can be stored in 2 basic places
<Startup Disc>: Library:Application Support:Logic
or
<User Home Folder>:Library:Application Support:Logic
The <User> items will only be available to that particular User Acount, the Main Library is available to all (this is where the Factory files are stored).
Within these directories, there are folders for Channel Strip Settings (with a different sub-directory for the different type of channel; you need to go for the Software Instrument folder), and also for Plugin Settings.
To keep your items separate from the Factory's, I'd suggest that you put your files in the User Folder.
CCT

Is there an online resource for additional Channel Strip Settings?

I'm sure it's out there... Is there a great place where you can upload/download your own or other's channel strip settings? I love the feature in Logic and would like to find more to listen to.

yes,
http://www.logicprohelp.com/
they have a page for this

Saved user patch not saving aux send channel strip settings?

Hi all,
I was reading the 'Using and saving patches" article in the manual and came across this quote:
"patches also save any aux channel sends that are needed to reproduce the complete patch,"
I was extremely excited and tried to create my own patch. My User Patch saves, and the aux send amounts are in the main channel strip, but the actual bus channel strips are not created.
I noticed that other logic patches actually create the bus strips with their predefined settings when you load them, but I can't seem to get my user patches to do this. Am I missing a step when I save my patch?
Thanks in advance!
Robert
P.S. - if it's useful, I am using Logic 10.0.7 on OSX 10.8.5 on a mid-2012 15" MBP Retina

Just thought I might bump this topic since I have the same problem. Any suggestions on a solution would be greatly appreciated!
Tedd

Channel Strip settings

If you save a Channel Strip setting as a sort of instrument template, can those same settings be opened in a Logic 8 channel strip? It would be nice if once you have the sound you want for a live setting, you can easily open up the same configuration in Logic for recording, etc.
thanks

If you're talking about the cst file you get when you save a channel strip setting to a file, then yes, Logic and MainStage appear to use the same file format: I can load the channel strip setting files in Logic that I have saved from MainStage.

Channel Strip Settings Menu

Similar Messages

Maybe you are looking for