Channel URL to contain object and method name

Hi,
There are many WEB features and filters that are based on the URL path or paramters.
BlazedDS uses the same URL to send all the remote object calls.
I can add more and more channels and map each remote object to one of the channels but it doesn't scale and even with it all the methods on the same object will look the same.
I know that the binary body contains the service name and method name , but this is not enough .
I need to have the  URL path/ parameters to contain the service and method names.
Is there any way to control the URL in the remote method beside of the set channel?
Shlomo.

OK,
I think I found the way.
The API of the RemoteObject presents the endPoint property:
'"This property allows the developer to quickly specify an endpoint for a RemoteObject destination without referring to a services configuration file at compile time or programmatically creating a ChannelSet. It also overrides an existing ChannelSet if one has been set for the RemoteObject service."
It means that before every call to a method I can set the end point to something like "http://.../messagebroker/amf?serice=MyService&method=MyMethod...
Shlomo

Similar Messages

  • Where will i get the method code and method name in Bpc

    Dear Experts,
    Thanks for watching this thread at the time of creating Consolidation methods they have
    NEW
    HOLDING
    GLOBAL
    PROPORTIONAL
    EQUITY
    lEAVING (END OF THE YEAR)
    LEAVING(DURING THE YEAR)
    Where will i get the method Code and method name.
    Can you please guide me.
    Regards,
    Srinivasan.

    The consolidation methods types you have listed are the standard ones  provided by BPC for Consolidation Method types.
    You can set the Consolidation Methods in the BPC Administration Console under Business Rules Library -> Consolidation Methods.
    There you can see some defaults - you can remove these and set your own if you prefer.
    You should read the BPC340 Training guide.

  • Connection Object and Street name

    Hi,
    Could anybody please specify the table name in which we can find the Connection object and Street name?
    Thanks and Regards

    Table EHAUISU you will have the connection object number.
    Then go to ILOA table give the connection object number in Functional loc. and execute it.
    You will get the address number. Then go to ADRC table to know the street name.
    You will not find the data in a single table.
    If you want to find then go to views
    V_EHAU_ADDRNR : IS-U Connection Object: Optimized Access for Address Number  "you will find address number for connection object.
    V_EHAUADR  :  You will get street name for connection object.
    Please let me know if you want any more details. if have any issues with answer then let me know the exact question for the same.
    Thank You.
    Regards,
    Siva

  • Table name for 'Program name of method' and 'Method name'

    As we know, each method method contains different  program name with ext. like "====CM0001" etc., Where can I find this program name of method in database tables?
    Note: Program names are in REPOSRC with type as 'I' and name as "CLASS NAME======CMXYZ". But here we can not decide with program name belongs to which class!
    Thanks,
    Naveen.I

    Use FM SEO_CLASS_GET_METHOD_INCLUDES. Provide your class name and you will get the method names with include name.
    Regards,
    Naimesh Patel

  • Regarding Business Objects and Methods

    Hi ,
    I need to create LSMW with BAPO for to create PO.
       Where shoud I found Business Objects and their method.
        Could you please suggest abt this.
    Regards,
    Sai.

    sai,
      "BAPI_PO_CREATE "  ( OR )  "BAPI_PO_CREATE1 "
    Goto SE37>Enter above bapi name>select where used list>it will show list>
    select prog RBUS2012
      or directly se38>RBUS2012>Press F7  or Display.
    Pls. reward if useful

  • How to convert a String variable as class name and method name?

    i have two classes
    class Student
    public String insertStudent(String sname)
    { return("Student has been inserted ");     }
    class Teacher
    public String execute(String methodName, String className)
    {  //return statement of the method 'insertStudent' in the class 'Student'; }
    }Now, i have a class with the main method. Here, i would like to call the method *'insertStudent'* of class *'Student'*
    using the method *'execute'* of class *'Teacher',* passing the method-name and the class-name (viz. insertStudent, Student) as the
    String parameter.
    Can anyone please help me out. Thanks
    regards,
    chinglai

    You should have just added that as a comment on your [initial posting|http://forums.sun.com/thread.jspa?threadID=5334953] instead of starting a new thread.
    Now, i have a class with the main method. Here, i would like to call the method 'insertStudent' of class 'Student'using the method 'execute' of class 'Teacher', passing the method-name and the class-name (viz. insertStudent, Student) as the
    String parameter.
    Why oh why? What do you want to achieve?
    Let me tell you: there is a way to do what you try to do, but it's not recommended and should be used only very sparingly. Especially not in anything like your code, that resembles normal business logic (as opposed to an application framework such as Spring, for example).
    Can you explain what exactly you want to do with that? Why should a Teacher be able to call any random method ony any other class. And what good would that do?

  • How to learn technics in wrting class, objects and methods

    Hi ,
    I am new this oops methodology. I know java language but don't know the basics. I mean to say I have no idea how to write classes and methods. I can write one single class with all the methods and I can call that class from an another class but this is not the way... I knew it but I am kinda confuse how to write the well structured oops style classes and methods....
    Can anybody help me please........
    Thanks

    A short simple (overly simple) explanation is that objects are like little machines, which operate independantly from other objects (other little machines). You design an application as a collection of these little machine/objects, interacting with each other. Then you drill down another layer of detail, and design the machines themselves. You do this by defining the classes, which are like blueprints to make a little machine/object.
    In java, this is largely expressed by the interface definition at the higher level, and the class definition at the lower level. The interfaces say how various objects may talk to each other, and the class definitions say how any individual object may talk at all.
    This is a very basic description, and in fact isn't entirely accurate; if they want to lots of people on this forum could pick it apart. But hopefully it gets the idea across. (As my language design prof said, quoting somebody else, "teaching is just a series of lies.")
    There are resources on the web about object-oriented programming, object-oriented design, etc. mutmansky's right, a college course is best, but you can still learn a lot from docs on the web.

  • Delete Class Objects and methods

    Hi, i have created a class file for a game. Now i have 3 to 4
    games in one Main File. So after playing one game user can choose
    another. Now can anybody tell me how to delete the first class
    Object or methods, which was used in First game. So that i can
    remove the garbage collections from Flash to make it with fast
    process?

    A short simple (overly simple) explanation is that objects are like little machines, which operate independantly from other objects (other little machines). You design an application as a collection of these little machine/objects, interacting with each other. Then you drill down another layer of detail, and design the machines themselves. You do this by defining the classes, which are like blueprints to make a little machine/object.
    In java, this is largely expressed by the interface definition at the higher level, and the class definition at the lower level. The interfaces say how various objects may talk to each other, and the class definitions say how any individual object may talk at all.
    This is a very basic description, and in fact isn't entirely accurate; if they want to lots of people on this forum could pick it apart. But hopefully it gets the idea across. (As my language design prof said, quoting somebody else, "teaching is just a series of lies.")
    There are resources on the web about object-oriented programming, object-oriented design, etc. mutmansky's right, a college course is best, but you can still learn a lot from docs on the web.

  • ALV report for 5 Grids using Objects and Method

    I have few questions in ALV 5Grids ,could you please correct me in the following program logic...
    Using this program logic i am able to generate the five Grids and able to populate Header details from VBAK into Grid1,If you click in the Grid 1 and it is populating item details in Grid2 from VBAP,parallally populating the customer data in Grid5 from KNA1.
    Now the pending issue is ,
    if you click in the Grid2 then we should populate the shipping details in Grid3 and
    if you click in the Grid3 then we should populate the billing details in Grid4.
    Program Logic;
    REPORT  ZAREPAS20.
    Tables : vbak,vbap,likp,lips,vbrk,vbrp,kna1.
    DATA : OK_CODE              LIKE        SY-UCOMM,
           G_CONTAINER          TYPE SCRFNAME VALUE 'BCALV7_GRID_DEMO_0100_VASU',
           DOCKING              TYPE REF TO CL_GUI_DOCKING_CONTAINER,
           SPLITTER_1           TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
           SPLITTER_2           TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
           splitter_3           TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
           CELL_TOP1            TYPE REF TO CL_GUI_CONTAINER,
           CELL_BOTTOM1         TYPE REF TO CL_GUI_CONTAINER,
           CELL_TOP2            TYPE REF TO CL_GUI_CONTAINER,
           CELL_BOTTOM2         TYPE REF TO CL_GUI_CONTAINER,
           CELL_LEFT            TYPE REF TO CL_GUI_CONTAINER,
           CELL_middle          TYPE REF TO CL_GUI_CONTAINER,
           CELL_RIGHT           TYPE REF TO CL_GUI_CONTAINER,
           GRID1                TYPE REF TO CL_GUI_ALV_GRID,
           GRID2                TYPE REF TO CL_GUI_ALV_GRID,
           GRID3                TYPE REF TO CL_GUI_ALV_GRID,
           GRID4                TYPE REF TO CL_GUI_ALV_GRID,
           GRID5                TYPE REF TO CL_GUI_ALV_GRID.
    DATA : GT_VBAK              TYPE STANDARD TABLE OF VBAK,
           GT_VBAP              TYPE STANDARD TABLE OF VBAP,
           GT_LIKP              TYPE STANDARD TABLE OF likp,
           GT_LIPS              TYPE STANDARD TABLE OF lips,
           GT_VBRK              TYPE STANDARD TABLE OF vbrk,
           GT_VBRP              TYPE STANDARD TABLE OF vbrp,
           GT_KNA1              TYPE STANDARD TABLE OF kna1.
    DATA:begin of itab1 occurs 0,
         vbeln type likp-VBELN,                            
         erzet type likp-ERZET,                             
         lfart type likp-LFART,                             
         posnr type lips-POSNR,
         END OF ITAB1.
    DATA:begin of itab2 occurs 0,
         vbeln like vbrk-vbeln,                            
         posnr like vbrk-fktyp,                            
         fkart like vbrk-fkart,                             
         fklmg like vbrp-fklmg,                             
         end of itab2.
    *selection screen for selecting range of values
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE text-001.
    select-options: S_vbeln for VBAK-vbeln.     
    selection-screen end of block b1.
          CLASS lcl_eventhandler DEFINITION
    CLASS lcl_eventhandler DEFINITION.
      PUBLIC SECTION.
        CLASS-METHODS:
          handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
            IMPORTING
              e_row
              e_column
              es_row_no
              sender.  " sending control, i.e. ALV grid that raised event
    ENDCLASS.                    "lcl_eventhandler DEFINITION
          CLASS lcl_eventhandler IMPLEMENTATION
    CLASS lcl_eventhandler IMPLEMENTATION.
    METHOD HANDLE_DOUBLE_CLICK.
    *DEFINE LOCAL DATA.
    DATA : itab_vbak type VBAK,
           itab_vbap type VBAP,
           itab_likp type likp,
           itab_lips type lips,
           itab_vbrk type vbrk,
           itab_vbrp type vbrp,
           itab_kna1 type kna1.
    *DISTINGUISH ACCORDING TO SENDING GRID INSTANCE
    CASE SENDER.
    WHEN GRID1.
       READ TABLE gt_VBAK INTO itab_vbak INDEX e_row-index.
           CHECK ( itab_vbak-vbeln IS NOT INITIAL ).
            CALL METHOD GRID1->set_current_cell_via_id
              EXPORTING
                 is_ROW_ID    =
                 is_COLUMN_ID =
                is_row_no    = es_row_no.
            Triggers PAI of the dynpro with the specified ok-code
            CALL METHOD cl_gui_cfw=>set_new_ok_code( 'ORDER_DETAILS' ).
    WHEN GRID2.
            READ TABLE gt_VBAP INTO itab_vbap INDEX e_row-index.
            CHECK ( itab_vbap-vbeln IS NOT INITIAL ).
            CALL METHOD GRID2->set_current_cell_via_id
              EXPORTING
                 is_ROW_ID    =
                 is_COLUMN_ID =
                is_row_no    = es_row_no.
            Triggers PAI of the dynpro with the specified ok-code
            CALL METHOD cl_gui_cfw=>set_new_ok_code( 'ORDER_DETAILS' ).
    WHEN GRID3.
            READ TABLE gt_LIPS INTO itab_LIPS INDEX e_row-index.
            CHECK ( itab_lips-vgbel IS NOT INITIAL ).
            CALL METHOD GRID3->set_current_cell_via_id
              EXPORTING
                 is_ROW_ID    =
                 is_COLUMN_ID =
                is_row_no    = es_row_no.
            Triggers PAI of the dynpro with the specified ok-code
            CALL METHOD cl_gui_cfw=>set_new_ok_code( 'DELIVERY_DETAILS' ).
    WHEN GRID4.
            READ TABLE gt_VBRP INTO itab_VBRP INDEX e_row-index.
            CHECK ( itab_vbrp-vgbel IS NOT INITIAL ).
            CALL METHOD GRID4->set_current_cell_via_id
              EXPORTING
                 is_ROW_ID    =
                 is_COLUMN_ID =
                is_row_no    = es_row_no.
            Triggers PAI of the dynpro with the specified ok-code
            CALL METHOD cl_gui_cfw=>set_new_ok_code( 'BILLING_DETAILS' ).
    WHEN GRID5.
            READ TABLE gt_KNA1 INTO itab_KNA1 INDEX e_row-index.
            CHECK ( itab_kna1-kunnr IS NOT INITIAL ).
          SET PARAMETER ID 'KUN' FIELD itab_KNA1-KUNNR.
           CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN.
          WHEN OTHERS.
            RETURN.
        ENDCASE.
    endmethod.
    endclass.    "lcl_eventhandler IMPLEMENTATION
    start-of-selection.
    *write :/ 'FEDEX INT''''L' .
    SELECT        * FROM  vbak INTO TABLE gt_VBAK
    where vbeln IN  S_VBELN.
    creating docking container
    create object docking
       exporting
        parent     = cl_gui_container=>screen0
        ratio      = 90
      exceptions
       others      = 6.
      if sy-subrc eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Create splitter container
    CREATE OBJECT splitter_1
        EXPORTING
          parent            = docking
          rows              = 1
          columns           = 3
         NO_AUTODEF_PROGID_DYNNR =
         NAME              =
        EXCEPTIONS
          cntl_error        = 1
          cntl_system_error = 2
          OTHERS            = 3.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Get cell container
      CALL METHOD splitter_1->get_container
        EXPORTING
          row       = 1
          column    = 1
        RECEIVING
          container = cell_left.
      CALL METHOD splitter_1->get_container
        EXPORTING
          row       = 1
          column    = 2
        RECEIVING
          container = cell_middle.
      CALL METHOD splitter_1->get_container
        EXPORTING
          row       = 1
          column    = 3
        RECEIVING
          container = cell_right.
    Create 2nd splitter container
      CREATE OBJECT splitter_2
      EXPORTING
          parent            = cell_left
          rows              = 2
          columns           = 1
         NO_AUTODEF_PROGID_DYNNR =
         NAME              =
        EXCEPTIONS
          cntl_error        = 1
          cntl_system_error = 2
          OTHERS            = 3.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Get cell container
      CALL METHOD splitter_2->get_container
        EXPORTING
          row       = 1
          column    = 1
        RECEIVING
          container = cell_top1.
      CALL METHOD splitter_2->get_container
        EXPORTING
          row       = 2
          column    = 1
        RECEIVING
          container = cell_bottom1.
    Create 3rd splitter container
    CREATE OBJECT splitter_3
        EXPORTING
          parent            = cell_middle
          rows              = 2
          columns           = 1
         NO_AUTODEF_PROGID_DYNNR =
         NAME              =
        EXCEPTIONS
          cntl_error        = 1
          cntl_system_error = 2
          OTHERS            = 3.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Get cell container
      CALL METHOD splitter_3->get_container
        EXPORTING
          row       = 1
          column    = 1
        RECEIVING
          container = cell_top2.
      CALL METHOD splitter_3->get_container
        EXPORTING
          row       = 2
          column    = 1
        RECEIVING
          container = cell_bottom2.
    Create ALV grids
      CREATE OBJECT grid1
        EXPORTING
          i_parent          = cell_top1
        EXCEPTIONS
          OTHERS            = 5.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CREATE OBJECT grid2
        EXPORTING
          i_parent          = cell_bottom1
        EXCEPTIONS
          OTHERS            = 5.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CREATE OBJECT grid3
        EXPORTING
          i_parent          = cell_top2
        EXCEPTIONS
          OTHERS            = 5.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CREATE OBJECT grid4
        EXPORTING
          i_parent          = cell_bottom2
        EXCEPTIONS
          OTHERS            = 5.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CREATE OBJECT grid5
        EXPORTING
          i_parent          = cell_right
        EXCEPTIONS
          OTHERS            = 5.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Set event handler
      SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid1.
      SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid2.
      SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid3.
      SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid4.
      SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid5.
    Display data
      CALL METHOD grid1->set_table_for_first_display
        EXPORTING
          i_structure_name = 'VBAK'
        CHANGING
          it_outtab        = gt_VBAK
        EXCEPTIONS
          OTHERS           = 4.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    REFRESH: gt_vbap.
      CALL METHOD grid2->set_table_for_first_display
        EXPORTING
          i_structure_name = 'VBAP'
        CHANGING
          it_outtab        = gt_VBAP    " empty !!!
        EXCEPTIONS
          OTHERS           = 4.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    REFRESH: gt_LIPS.
      CALL METHOD grid3->set_table_for_first_display
        EXPORTING
          i_structure_name = 'LIPS'
        CHANGING
          it_outtab        = gt_LIPS    " empty !!!
        EXCEPTIONS
          OTHERS           = 4.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    REFRESH: gt_VBRP.
      CALL METHOD grid4->set_table_for_first_display
        EXPORTING
          i_structure_name = 'VBRP'
        CHANGING
          it_outtab        = gt_VBRP    " empty !!!
        EXCEPTIONS
          OTHERS           = 4.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    REFRESH: gt_KNA1.
      CALL METHOD grid5->set_table_for_first_display
        EXPORTING
          i_structure_name = 'KNA1'
        CHANGING
          it_outtab        = gt_KNA1    " empty !!!
        EXCEPTIONS
          OTHERS           = 4.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Link the docking container to the target dynpro
      CALL METHOD docking->link
        EXPORTING
          repid                       = syst-repid
          dynnr                       = '0100'
         CONTAINER                   =
        EXCEPTIONS
          OTHERS                      = 4.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    NOTE: dynpro does not contain any elements (ok_code -> GD_OKCODE)
      CALL SCREEN '0100'.
    Flow logic of dynpro:
    *PROCESS BEFORE OUTPUT.
    MODULE STATUS_0100.
    *PROCESS AFTER INPUT.
    MODULE USER_COMMAND_0100.
    end-of-selection.
    *&      Module  STATUS_0100  OUTPUT
          text
    MODULE STATUS_0100 OUTPUT.
      SET PF-STATUS 'STATUS_0100'.
    SET TITLEBAR 'xxx'.
    Refresh display of detail ALV list
      CALL METHOD grid2->refresh_table_display
       EXPORTING
         IS_STABLE      =
         I_SOFT_REFRESH =
        EXCEPTIONS
          OTHERS         = 2.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Refresh display of detail ALV list
      CALL METHOD grid3->refresh_table_display
       EXPORTING
         IS_STABLE      =
         I_SOFT_REFRESH =
        EXCEPTIONS
          OTHERS         = 2.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Refresh display of detail ALV list
      CALL METHOD grid4->refresh_table_display
       EXPORTING
         IS_STABLE      =
         I_SOFT_REFRESH =
        EXCEPTIONS
          OTHERS         = 2.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Refresh display of detail ALV list
      CALL METHOD grid5->refresh_table_display
       EXPORTING
         IS_STABLE      =
         I_SOFT_REFRESH =
        EXCEPTIONS
          OTHERS         = 2.
      IF sy-subrc  eq 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDMODULE.                 " STATUS_0100  OUTPUT
    *&      Module  USER_COMMAND_0100  INPUT
          text
    MODULE USER_COMMAND_0100 INPUT.
    CASE SY-UCOMM.
    WHEN 'BACK' OR
         'EXIT'  OR
         'CANCEL'.
         SET SCREEN 0.LEAVE SCREEN.
    USER HAS PUSHED BUTTON "DISPLAY OREDERS"
         WHEN 'ORDER_DETAILS'.
          PERFORM ORDER_SHOW_DETAILS.
          when 'DELIVERY_DETAILS'.
            PERFORM DELIVERY_SHOW_DETAILS.
          WHEN 'BILLING_DETAILS'.
             PERFORM BILLING_SHOW_DETAILS.
         WHEN OTHERS.
    ENDCASE.
    CLEAR : OK_CODE.
    ENDMODULE.                 " USER_COMMAND_0100  INPUT
    *&      Form  ORDER_SHOW_DETAILS
          text
    -->  p1        text
    <--  p2        text
    FORM order_show_details .
    define local data
      DATA:
        ld_row      TYPE i,
        itab_VBAK     TYPE VBAK.
      CALL METHOD grid1->get_current_cell
        IMPORTING
          e_row = ld_row.
      READ TABLE gt_VBAK INTO itab_VBAK INDEX ld_row.
      CHECK ( syst-subrc = 0 ).
      SELECT        * FROM  KNA1 INTO TABLE gt_KNA1
             WHERE  KUNNR  = itab_VBAK-KUNNR.
      SELECT        * FROM  VBAP INTO TABLE gt_VBAP
             WHERE  VBELN  = ITAB_VBAK-VBELN.
    *REFRESH: gt_LIPS.
    ENDFORM.                    " ORDER_SHOW_DETAILS
    *&      Form  DELIVERY_SHOW_DETAILS
          text
    -->  p1        text
    <--  p2        text
    FORM DELIVERY_SHOW_DETAILS .
    define local data
      DATA:
        ld_row      TYPE i,
        itab_VBAP     TYPE VBAP.
      CALL METHOD grid1->get_current_cell
        IMPORTING
          e_row = ld_row.
      READ TABLE gt_VBAP INTO itab_VBAP INDEX ld_row.
      CHECK ( syst-subrc = 0 ).
      SELECT LIKPVBELN LIKPERZET LIKPLFART LIPSVBELN
           INTO CORRESPONDING FIELDS OF TABLE ITAB1
           FROM ( LIKP INNER JOIN LIPS ON LIKPVBELN = LIPSVBELN )
           WHERE LIKP~VBELN IN S_VBELN.
    *REFRESH: gt_LIPS.
    ENDFORM.                    " DELIVERY_SHOW_DETAILS
    *&      Form  BILLING_SHOW_DETAILS
          text
    -->  p1        text
    <--  p2        text
    FORM BILLING_SHOW_DETAILS .
    define local data
      DATA:
        ld_row      TYPE i,
        itab_LIPS     TYPE LIPS.
      CALL METHOD grid1->get_current_cell
        IMPORTING
          e_row = ld_row.
      READ TABLE gt_LIPS INTO itab_LIPS INDEX ld_row.
      CHECK ( syst-subrc = 0 ).
      SELECT VBRKVBELN VBRKFKTYP VBRKFKART VBRPFKLMG
           INTO CORRESPONDING FIELDS OF TABLE ITAB2
           FROM ( VBRK INNER JOIN VBRP ON VBRKVBELN = VBRPVBELN )
           WHERE VBRK~VBELN IN S_VBELN.
    ENDFORM.                    " BILLING_SHOW_DETAILS

    Hi,
    ALV means ABAP List Viewer. Most convenient way to use it is through reuse library (cf.
    transaction se83) available from release 4.6 of SAP R/3.
    ALV is available in two modes: list and grid. List mode is good old list processing with
    standard functionnalities, and grid mode is using a new OCX object displaying grids.
    Classical reports needs more coding to set the horizontal and vertical lines.we need to adjust
    the lines manually.Even interactive also takes lot of code.
    ALV reports reduces the code when compared to classical reports.we use function modules to
    generate the output.
    that r REUSE_ALV_LIST_DISPLAY,REUSE_ALV_GRID_DISPLAY,REUSE_ALV_HIERSEQ_LIST_DISPLAY etc..
    the following threads will give some examples of the functions which you are expecting
    Header
    regarding function module
    hide ALV field
    Simply Display selection parameter values in the ALV OUTPUT
    Drag and drop in a report
    https://www.sdn.sap
    Reprots
    http://www.sapgenie.com/abap/reports.htm
    http://www.allsaplinks.com/material.html
    http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
    ALV
    1. Please give me general info on ALV.
    http://www.sapfans.com/forums/viewtopic.php?t=58286
    http://www.sapfans.com/forums/viewtopic.php?t=76490
    http://www.sapfans.com/forums/viewtopic.php?t=20591
    http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you
    use - ABAP Objects calls or simple function modules.

  • How to get class name and method name within a class method?

    Hi,
    In a java class, is it possible to get its class name and the class method?
    Please advise.
    Thank you.

    I mean whether there's any built-in command that will
    return the class name instead of code it ourself, for
    easier maintenance.
    Possible?
    this.getClass().getName();

  • Understanding Java superclass hierarchy through System objects and methods

    I wanted to see if I can manipulate datastreams manually rather than relying on classes.
    I knew that System.in was an InputStream object so it must use the said methods such as System.in.read()
    I made a program for it. It gave me an IOException. When I went to "catch" the exception it said cannot find symbol IOException. This was fixed by import java.io.*;
    I find that very weird conceptually. First System.in is wrapped by the System class. I have no need to import java.io.*; to use System so why would I need to import it in this case. Second, when I use Scanner to read in from System.in I do need to import java.io.*, yet I'm pretty sure it makes the same method calls to System.in I make, no?
    //import java.io.*;
    public class streams
         public static void main( String[] args )
              try {
                   System.out.printf( "%c\n", System.in.read() );
              } catch (IOException e) {
                   System.err.println( "IOException error" );
    }

    Importing does not make classes available. All it does is tell the compiler that when you say "IOException," it is actually shorthand for "java.io.IOException." The import applies only to the class in which it is declared, and only at compile time. It is gone once you compile your class. It does not show up in the .class file, and has no effect whatsoever at runtime.

  • Looking for a table which contains Datasource and the name of DSO

    Hello,
    I need to extract a list with the datasource + Name System + DSO. If anyone know a BW table.
    Thanks in advance.
    Regards,
    Santos.

    Hi Santos,
    Please check the table "RSTRAN" -- directory of transformations in your system.
    If you have between data loading between DS and DSO, then you should have active data transformations.
    In this table, select type of source as data source and type target as DSO and execute.
    You will get list of DS and DSO which has active transformations.
    If you want details about each DS and DSO then you can check the below tables
    RSDODSO --- Directory of all ODS Objects
    RSOLTPSOURCE     --- Replication Table for DataSources in BW
    Regards,
    Venkatesh

  • Nat object and no name

    we have ASA with image 9.1.3 we have given no name command .
    source 10.1.1.1
    destination 192.168.1.1
    port 443 80 21
    for NAT  rule we have created 3 destination object on ASA with name 192.168.1.1_80 , 192.168.1.1_443 & 192.168.1.1_21
    access list only one statement source 10.1.1.1  destination 192.168.1.1_80 port 80 , 443 and 21
    If we try to delete object name 192.168.1.1_80  it gives error that it is used in access list .
    But if I try to delete 192.168.1.1_443 & 192.168.1.1_21 it doesnt give me any alert and deletes the object but it removes the NAT .
    My understanding is unless object is present in access list it will be removed .
    Just want to know what is best practice I should add the network object 192.168.1.1_443 & 192.168.1.1_21 in access-list as well .
    Thanks for help

    Hello,
    If you are using auto NAT anytime u delete an object the existing configuration withing the object (including NAT) will be lost!
    I hope I did understood ur problem.
    Regards
    Sent from Cisco Technical Support Android App

  • Links set as objects and text are lost

    Currently I am using Acrobat X (Trial) before purchasing it for my organisation. It seems that when I try to convert a Word 2003 document containing object and text links, most of them are being lost during the conversion to pdf using Acrobat X. I went through certain forums and found that this seems to be a known issue. Is there a workaround or a bug fix for these types of problems? Thanks in advance.

    I am using the PDF Plugin (icon in Word 2003). Still, most of the object links are getting lost. I am not printing directly to the PDF printer.

  • Business Object and tasks for Plant Maintenance

    Hi,
    I would like to know which object and method should I use to create the following tasks?
    Inspect equipment to check if faulty
    Replace equipmentCreate purchase order
    Maintain equipmentCreate service order
    Thank you.

    Hi Arun,
    Swtich on the event trace using tcode SWELS and then perform each of the operations you mentioned above. Then see the event trace using tcode SWEL to check which business object events and business objects are associated with these operations i.e. inspect equipment, replace equipment, maintain equipment etc.
    Then you can drill down in those business objects using SWO1 tcode and check if there are any methods for your requirements or not.
    Regards,
    Ibrahim

Maybe you are looking for