Channels available on new STB's Motorola DCT-700

Verizon supplied at no charge 3 STB's (Motorola DCT-700) for my other room tv's. Two of the boxes are providing more of the channels I receive on my main DVR box including the movie package channels but one of the new boxes seems to only receiving the real basic channels I previouosly received when the cables were plugged directly into the other TV's. ANY IDEAS, I would hate to lose all the channels the other two are receiving but whats up with this one STB.

You should get all of the channels you subscribe to on the DCT-700 except of course for the HD channels, so you come out way ahead using the free box.
I suspect that, if you pull the electrical plug on the box that is not working properly, wait 30 seconds, and plug it back in, you will get all of your channels. If you don't, then I think about the only thing you can do is call the FiOS FSC.

Similar Messages

DCT 700 and QIP6416-2 issue

I have the 2 boxes above in the same room. I split the cable coming out of the wall and ran a cable to each stb.
The DCT 700 is used to on my Series 2 Tivo box so that it can record shows that I can not record with my QIP6416-2 box because of scheduling conflicts.
I inclosed the DCT 700 front panel so that only the Tivo LED emitter could change the channel on the DCT 700.
My problem is that if I press the LIST button which brings up the record shows listing on my QIP6416-2 box a big message pops up on the screen of the DCT 700 telling me the 'DVR not aviable'. The message will remain on the DCT 700 screen for about 10 seconds. This also gets recorded by the Tivo
How can I stop the DCT 700 from displaying this message that cover most of the screen and screws with the tivo recording. It is very agrevating when I am try to watch a recorded show off the Tivo system.
Thanks for any help.
Solved!
Go to Solution.

You need to more effectively block the front of the DCT700. I don't have the TIVO setup you have, but I do have a DCT700 and a 6416 in the same TV stand. I can simulate your problem by moving the plastic I use to block the DCT700 over just a little. The signal from the remote can bounce around a bit and can find the receiver on the 700 if it isn't properly covered.
Try the cover. If it doesn't work, post back.

MythTV - Getting Motorola DCT 6200 box to connect over FireWire

I have a fresh 64-bit install of Arch and I've installed MythTV. I plugged in my Motorola DCT-6200 HDTV set top box via FireWire to my HTPC. MythTV does not list the FireWire as a capture option. And, to be honest, I have no idea what else to do at this point. I understand this is probably going to take a lot of effort but if I could simply get pointed in the right direction, that would be great. Thanks!

I've used an old 500GB HD I had and it works fine. Many drives will work other than what's listed on Verizon's list. Stay away from "Green" drives, as they may power down at times which you do not want.
I kept trying to connect this drive multiple times, thinking it was not recognized because the space available did not change. It took me a while to realize that a new 2nd tab appeared for the 2nd drive! Toggling over to the right to select this tab would then show the available space on the external HD. My prior provider, Cablevision, did not work this way. Their software combined both HD's into one total storage display amount. So, check to see if you've got the 2nd tab. If not, then it is not being recognized. Might be worth trying another cable.

Cisco STB versus Motorola STB question

I have not had and still do not have consistent audio with my FIOS TV service since Friday. They only way I have been able to get sound back is to unplug the Cisco STB to reboot. This only provide a temporary fix because audio only stays for at most 10 minutes. I lose sound for ALL channels when the audio goes away. I have done all of the Tier 1/2 troubleshooting with customer support with no success. After the reading the forums, I saw some people recommend switching to the Motorola STB. I requested through technical support if I can be switched to a Motorola box since I only have one set top box at my home. They said they have to contact the sales department. According to technical support, after speaking with the sales department, the sales department said that I cannot be switched from a Cisco STB to a Motorola STB because at the time of signup, whatever STB you get, you are stuck with it for the life of the contract. Has anyone heard this policy before? It is very frustrating because the new STB they are sending me will be the FOURTH Cisco box I will have be provided since I got the service in June 2012

Maybe to be fixed in 1.9.1. I don't think they started rolling that out to Cisco boxes yet.

DCT-700 music channels...

The music channels are coming us having temporary technical difficulties on my DCT-700 stb. It has been like this for a long time now. When are these "temporary" issues going to be resolved or are they not going to be?

Christian, you are giving out wrong information. Business customers need to subscribe separately. All the music channels are in the basic Prime package for all residential customers.

Availability of new J2EE 1.4 SDK

I am pleased to announce availability of new J2EE 1.4 SDK. You can download this today from http://java.sun.com/j2ee/1.4/download.html
J2EE SDK now includes App Server Platform Edition 8.2 (SJSAS PE 8.2) delivering a rich application deployment environment that is highly available and scalable. It dramatically lowers total cost of ownership proven by the latest SPECjAppServer2004 benchmarks on Sun T2000 CoolThread Server ($86/JOPS for application tier running on SJSAS PE 8.2, Solaris 10, and MySQL5.) The new release greatly improves Web Services performance by a factor of 2 to 4 through the inclusion of FastInfoset and support for latest technologies such as AJAX clients and Java database, based on the Apache Derby to decrease the development cycle time of Web 2.0 interactive applications and maximize developer productivity.
The Sun Java System Application Server PE 8.2 is fully integrated with NetBeans 5 by providing an out of the box environment for development, deployment and debugging of Web and enterprise applications and extends its advocacy for open source by supporting RedHat Linux 4, MySQL 5 and Apache Derby.
Below are highlights of Sun Java System Application Server Platform Edition 8.2
* J2EE 1.4 compatible
* Outstanding developer experience with NetBeans 5 and improved deployment speed, runtime footprint and server start up time. NetBeans 5.0 includes App Server 8.2 as a default J2EE runtime.
* Superior throughput performance and better scalability supporting multi core/ multi threaded architecture.
* Fast Infoset support improves webservices performance multiple folds.
* App Server 8.2 bundles deployment ready Derby database making it possible to develop and deploy end to end J2EE application.
* App Server 8.2 adds support for Red Hat 4 and My SQL 5.
* In built JMS resource adapter makes connectivity with backend systems even more easier. Application Server 8.2 adds out of box connectivity for IBM MQ Series and Sun's MQ Server.
* Enhanced J2EE 1.4 blueprints including demonstration of using Web 2.0 technologies like AJAX with App Server 8.2
* JavaServer Faces Support: Developers can quickly build web applications by: assembling reusable UI components in a page; connecting these components to a data source; and wiring client-generated events to server-side event handlers.
* Improved Administration Console:
App Server 8.x admin console adds new look and feel with capabilities like JNDI namespace browser, JDBC Connection Validation, Deployment Descriptor Viewer, Error log viewer and improved monitoring.
* Web Services Security: Container message security mechanisms implementing message-level authentication (e.g. XML digital signature and encryption) of SOAP web services invocations using the X509 and username/password profiles of the OASIS WS-Security standard.
* JavaServer Pages Standard Tag Library 1.1 Support: the library encapsulates core functionality common to many JSP applications.
* Bundled J2SE 5.0_06
Sun Java System Application Server Platform Edition is free for development and deployment. Sun support is offered at an additional cost.
Useful Links and pointers:
- Download bits from http://java.sun.com/j2ee/1.4/download.html
- SPECjAppServer2004 benchmark results demonstrating Sun's price/performance strengths. http://www.spec.org/jAppServer2004/results/res2005q4/jAppServer2004-20051109-00023.html
- Stay connected with open source development of Application Server 9 on Project Glassfish via The Acquarium
http://java.sun.com/javaee/glassfish/
http://blogs.sun.com/roller/page/theaquarium
- Migrate to Sun Java System Application Server 8.2 today !
http://java.sun.com/j2ee/tools/migration/index.html
Fast Infoset whitepaper
http://www.sun.com/software/whitepapers/javaenterprisesystem/web_services_performance.pdf
More Information at http://java.sun.com/javaee
Thanks,
- Pratik
Product Line Manager
Application Platform Products
Sun Microsystems Inc.

I couldn't get SAS8 to install using JRE 5. I have, however, succeeded in getting an application client to run with the latest JDK. If the client and server JRE differ, you've got to assign a serialVersionUID to any custom classes that will be passed back and forth.

No Free Channel available

I'm getting the "No Free Channel available" error message after some time looping through the FOR-NEXT below.
It is very hard to reproduce, some times it does happens sometimes it's just fine.
I'd like to know what causes it???
I thought I can through in a call ChnDel(chnNum) to clean up things but it still crashes with or without it.
Please advise!!!
Thanks,
Boyan
PtlShow = False
View.AutoRefresh = false
DataDelAll
Call View.Sheets.RemoveAll()
Set MySheet = View.Sheets.Add("NewSheet")
call ChnDelete("1-" & ChnNoMax)
chnNum = 1
progresNum = 1
'===================================================================================
Dim l1, l2, n
Dim wholeJob, pRatio()
Dim NewGroup
Call LoopInit()
For i = 0 to ubound(ObjTestDates)
l2 = ubound(ObjTestDates(i).Measurements) + 1
Call MsgLineDisp ("Channel " & i & " of " & ubound(ObjTestDates))
wholeJob = 2 * l2
ReDim Preserve pRatio(i)
pRatio(i) = (100 / wholeJob)
NewGroup = "Group " & CStr(i+1) & " - " & ObjTestDates(i).TestDate
Call GROUPCREATE(NewGroup, i+1)
Call GroupDefaultSet(i+1)
For ii = 0 to ubound(ObjTestDates(i).Measurements)
    For n= 0 to 1
      if n = 0 then
        CurrChannel = CStr(ii+1) & " X_Channel " & " - " & ObjTestDates(i).Measurements(ii)
      else
        CurrChannel = CStr(ii+1) & " Y_Channel " & " - " & ObjTestDates(i).Measurements(ii)
      end if
      call ChnDel(chnNum)
      Call chnalloc(CurrChannel,ObjTestDates(i).ChannelLength(ii)+1,1,DataTypeFloat64,"Numeric",i+1,chnNum)
      Call LoopInc(progresNum*pRatio(i))
      chnNum = chnNum + 1
      progresNum = progresNum + 1
    Next
Next
progresNum = 0
Call LoopInc(progresNum*pRatio(i))
progresNum = 1
Next
Call LoopDeInit()
Call msgboxcancel

See more discussion about this behavior here. Thanks.

46YL863: Changing TV channels - delay before new picture appears

Hope someone can advise me please on an 'issue' that's recently arisen with my 46YL863 TV.
I say 'issue' rather than problem in case it's something to do with my settings that is causing this.
When I change TV channels I'm noticing that there is a several second delay from the current picture to the new one. I've narrowed it down to it only happening when switching from an HD channel to an SD one, or from an SD to an HD.
In these circumstances the screen first goes black, then blue and after a couple more seconds the new channel picture appears.
Changing between HD channels or SD channels and the new picture appears almost immediately.
This has not been happening prior to the last couple of days, so either a fault has developed or I've changed a setting somehow.
I've tried other HDMI input sockets and situation is the same.
Any suggestions please?
Thanks.

Further, I've now noticed that when playing back a recording from my Humax box, before the programme plays I get a few seconds of black screen before the picture appears. That didn't happen before. Don't know therefore if the problem's with my TV or the Humax Foxsat box.

IPad available in New York

I will go to New York City next week from Italy and I want buy an iPad.
There are available in New York's Apple Store now?
Thank you very much!

As of Saturday 04/17 3pm NYC time:
5th Ave - Yes.
Soho - Yes.
Upper West Side - Almost sold out today. Don't know when next shipment will be.
West 14th Street - Yes.
All of the stores stated that they may or may not have some when "you" arrive next week. And to please call that day to see. In general they all do have stock of every model, but not every model maybe available... They also could not give me exact numbers left of each or all models.
I hope this helps.
Sincerely,
G.
<Edited by Host>

When is reserving/preording available for new products?

When is reserving/preording available for new products? Is it annoucnement day or what? I'm planning on getting the iPad 3 as soon as it comes out, or as soon I can.

Nobody here can say for sure - apple will announce on announcement day, and it will be well publicized. In recent years, the iPhone and iPad have not been available for ordering on announcement day, but apple could change that policy at any time.

Is an iBooks Author tutorial available for new users?

Is an iBooks Author tutorial available for new users?

You can also try this site for video training on iBA. It's around $25/month for unlimted viewing and may be easier for some people than reading a manual:
http://www.lynda.com/iBooks-tutorials/iBooks-Author-Essential-Training/101460-2. html

Is iweb available for new apple computers?

Is iweb available for new apple computers?

To access you iWeb domain file you will want to click on your desktop. Then use the Go Menu. hold the option key to reveal the Library. Then Application Support-> iWeb
That's where your iWeb domain file should be.
An older video:
http://www.youtube.com/watch?v=D87w67lfOVU

Will THE SUMMER HOUSE short film be available from New Zealand itunes?

Will THE SUMMER HOUSE short film be available from New Zealand itunes?
It stars Robert Pattinson

Hi and Welcome to Apple Discussions
Will THE SUMMER HOUSE short film be available from New Zealand itunes?
No one knows for sure, However you can request that Apple include it on the iTunes Store via http://www.apple.com/feedback/itunes.html
J.C
Message was edited by: J.C

Hi, I just want to know when will be available the new ipod touch

Hi, I just want to know when will be available the new ipod touch

October, as had been said here already literally dozens of times, and stated on Apple's web pages and in the Apple Store quite clearly. If you're asking for a specific date, then again as has been said here multiple times, Apple has not yet announced a specific release date.
Regards.

Is i phone 4s (16 Gb) unlocked version available in New York Apple Store & what is the price?

Is i phone 4s (16 Gb) unlocked version available in New York Apple Store & what is the price?

Call them and ask.

Channels available on new STB's Motorola DCT-700

Similar Messages

Maybe you are looking for