Chaper markers missing on export

I have just upgraded to FCP5 and DVDSP4. I have a
1
hr 45 mn video with 12 chapter markers. When I
export
to quicktime for input to compressor no chapter
markers show up. I did not have the problem with
FCP4
and DVDSP2.
I am putting the markers in the timeline, not
clips
and exporting with "all markers" setting. I have
also tried using "DVDSP marker" and "Chapter
marker"settings but nothing works. I have been
doing
this for several years so I'm not a newbe but this
is
frustrating. Has anyone had this proble or know of
a
fix?
When you export, change the setting to either chapter
markers or dvd studio pro markers.
Yes, I am hitting MM from the sequence then selecting chapter. I have tried exporting with just chapter markers set and with just DVD studio pro markers set but nothing works

Similar Messages

Some Audio Missing from Exported Movie

I've exported a movie from iMovie to iTunes for sharing with AppleTV but the sound is missing from the last 75% of the movie when played back in Itunes or AppleTV. All the sound is ok in the iMovie project so some of it appears to have gone missing when exporting to iTunes.
I have tried re-exporting it but it's still the same result.
Any help would be appreciated.
Regards
Joe

Like everyone else here, I'm just an iMovie user who volunteers to help answer questions.
Unfortunately, recent changes to the Discussion software introduced bugs that make it very difficult to reply to user questions. Despite assurances by Forum administrators, these bugs are not being fixed.
This is to ask that you contact Apple, suggesting that additional resources be allocated to fixing the Discussion software. Hopefully your support will encourage Apple to address these problems.
Here's the man who should be able to get some action:
Steve Jobs <[email protected]>
I plan to include this message in postings until the issues are resolved.
Joe, I've also seen problems exporting iMovie projects with the Apple TV exporter, although never the problem you mentioned.
I suggest you try another way to configure your own export settings. Your goal will be to create an export very similar to Apple TV, but build it on your own. The Apple TV exporter uses the H.264 codec, used for many other exports too.
(You can test this on one or two clips in the affected area before exporting the entire iMovie project. Use the "Share selected clips only" checkbox.)
Instead of choosing the Apple TV export in the export dialog window, try choosing "Movie to MPEG-4". Then click on the Options button. Configure these settings:
UNDER THE VIDEO TAB:
Video Format: H.264
Data Rate: 2653
Optimized for: Download
Image Size: Custom, 720x480
Frame Rate: Current (or 29.97 for NTSC, 25 for PAL)
UNDER THE AUDIO TAB:
Audio Format: AACV-LC (Music)
Data Rate: 128 kbps
Channels: Stereo
Output Sample Rate: Recommended
Encoding Quality: Better
When the export is done, change the file extension to ".m4v", the extension used by Apple TV, if you like. You'll want to test the movie in whatever ways you now use the traditional Apple TV movie.
Karl

Objects missing when exporting to PDF, but show up when printing to PDF

Hi - I'm working with someone, both of us in InDesign CS4, and she has some documents that cause a few random objects to just go missing when exported to PDF (same on my computer). But when printing to PDF, they show up fine. They also show up fine if we recreate each individual object, but that can end up being a lot of work. She prefers to export to PDF because of quality. I'm drawing a blank on this one!
The attached file shows the issue. The green blocks just don't want to show up when exporting.

Peter -
The links are just the PDFs of the black and white portions and don't really matter too much since they show up fine when exporting or printing to PDF. Our main concern is the green blocks, which are indeed the green areas of the plan you pointed out. They are actually separate objects created directly within InDesign that can be moved and adjusted.
I just updated to 6.0.4 and that didn't help. I wonder if this may be a variant of the bugs I was reading about with master pages and certain things not showing up when creating PDFs or printing (even though none of these things are on the master page)?
Thanks

I am missing the export format wmv in my media encoder

I am missing the export format wmv in my media encoder. I have cs6 web/design premium. I seems that I don't have a full version of the media encoder. But why?

WMV is part of any standard Windows install. If it doesn't show up, there is a configuration error or something is blocking the relevant components. That all there is to it - Adobe apps just use the sysstem components. There's no magic beyond that. As a start, check if the stuff shows up in Adobe Media Encoder or any other tools for that matter. Also make sure to run with sufficient user privileges so you have access to all system components. Likewise, turn off security tools that may be blocking this. also run Windows Update and/or the relevant Windows Media Player updates.
Mylenium

Missing all export options in Adobe Premiere (can only export to final cut pro xml). Where are the options?

Missing all export options in Adobe Premiere (can only export to final cut pro xml). Where are the options?

There never was a trial version of FCP7. The application was only ever sold as part of the Final Cut Studio suite of applications. You might still find copies on eBay.

Audio and Video option missing from Export Quicktime Movie Include

Today as I was exporting a clip, I noticed that the Audio and Video option was missing from the Include drop down. I only have the options of Left, Center, Right.
I highlight the sequence, control E (or File>Export>Quicktime Movie) and the Save window comes up. The Settings drop down is the same, the Markers: drop down is the same, but the Include: has the options of Left, Center and Right. I thought the Video and Audio dropdowns were always there. I hate to admit it, but I have not paid attention to them in a while. Getting old I guess.
Sequence settings is 720x480 NTSC DV (3:2)
NTSC - CCIR 601 / DV (720x480)
Lower (Even)
29.97
QT Video Settings
DV/DVCPRO - NTSC
100%
Audio
48 kHz
16-bit
Channel Grouped
Did I miss something?
Thanks

Thanks, forgot about that.
For what ever reason it started working correctly a couple of hours later, after I started an SD project. The video came out fine
I had been trying out a couple new applications, so maybe one was causing it. I will see if it happens in the future.
Jim

GOP Structure Differs or Necessary Cell or Chapter Markers Missing?

DVD Studio Pro 3.0.2
A small project with one track consisting of two video streams.
Both pieces of video are exactly the same length.
Both are excoded using the same preset in Compressor.
I set up the new preset using CLOSED GOP which the manual tells me is needed for multi-angle projects.
The average bitrate for one is 4.9Mbits the other is 5.0Mbits.
I'm using buttons in a graphic in the subtitle track to switch between V1 & V2.
The track has 3 chapter markers. One at the very start.
One approx 1 second in, and one approx one second from the end.
The subtitle sits between Chapter Markers 2 & 3. (Button Highlight Markers).
When I run it in the simulator I get:
"Warning: Illegal angle situation. Only the Main Video Angle will be simulated."
I click on "OK" and in the simulator it then works quiet well.
However when I try the build I get:
"Lounge-View01:Angle GOP Structure Differs. Necessary Cell or Chapter Markers may be missing"
Can anyone advise what may be going wrong?
I've done a search but cannot find a suitable solution.
(In preferences I have "Fix Invalid Makers On Build" on).
I've spent some time on this trying a few things but seem to be going around in circles.
Thanks all.

Thanks Drew.
I'd actually read a couple of those threads when I did my original searches.
Still I went back and read them again and something "clicked".
A post mentioned that if your FCP sequence had a cut, when you encode it with Compressor, Compressor will force a "i" frame. (Is this mentioned anywhere in any manual? I missed it if it was). It then occurred to me that one of the two sequences I was having trouble with had a single cut (edit) in it.
Which means the GOP order probably changed at this point resulting in the "GOP Structure Differs" error message.
To resolve this I exported both sequences from FCP as self contained Quicktime movies. These self contained files now no longer had any breaks or "cuts".
I put these into Compressor and re-encoded the MPEG2 files. I put the results into DSP and tried again. These re-encoded MPEG2 files made from the self contained QT files worked perfectly. No error messages at all.
I build a test project which wouldn't work in (Apples) DVD Player (not unexpected), but worked fine when burnt to a DVD+RW disc and tried in a free standing DVD player.
So when making a multi-angle project in DSP the best procedure appears to be:
(1.) Complete your FCP sequences.
(2.) To remove any cuts or breaks in your FCP sequences, export the sequences as self contained MOV files.
(3.) Use the self contained MOV files when encoding with Compressor, as this will ensure matching GOP structures in the resulting MPEG2 files.
Now all I have to do is to get the overlay to sit properly on the screen .....

STRANGE: single clip missing in export! (but still in the timeline)

Strangest thing: I exported a project... and a SINGLE clip is missing. BUT... the "key" over that clip shows up (over "black.") Hmmm... So I went back to the timeline... the clip is STILL THERE! So, I re-rendered, exported again... SAME THING. That one darned clip goes "black" w/ the key over it. Any suggestions?

NOTE: Had no problem exporting this same project before.
1.) even clip info = 720 x 480 / 29.97 fps (same as ALL clips throughout entire project)
2.) Timeline info = 720 x 480 DV Anamorphic 29.97
3.) Here's the clip in the timeline. (see image, it's the gentleman in the labcoat) Amazingly, in the export the "keys" appear over black. Just this ONE clip is missing--audio and video. No other clips are affected.
4.) Finally, here is how I am exporting the project: (see image)

Data missing when Exporting or print preview from ALV report

Hi
I have a alv report which is showing fine but when i try to export it to say excel sheet or do print preview some of the data is missing. Can anyone tell me how to fix this. or at least point to some document that discuss this problem.
Here is my ALV CODE
* CALL_ALV
form call_alv.
* v_repid = sy-repid.
perform build_field_catalog using field_tab[].
perform build_eventtab      using events[].
perform comment_build       using header_alv[].
perform build_sorttab       using gt_sort[].
* perform build_layout.
* v_variant-variant = '/TEST3'.
* Call ABAP List Viewer
call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
      i_callback_program      = v_repid
      i_callback_user_command = ''
      i_structure_name        = 'REC'
      it_fieldcat             = field_tab[]
      it_special_groups       = gt_sp_group[]
      it_sort                 = gt_sort[]
      i_save                  = v_save
      is_variant              = v_variant
      it_events               = events[]
*      is_layout               = gd_layout
    tables
      t_outtab                 = REC
    exceptions
      program_error            = 1
      others                   = 2.
endform.
From my Catalog this data is missing
* BUILD_FIELD_CATALOG
form build_field_catalog USING pt_fieldcat type
                               slis_t_fieldcat_alv.
data: ls_fieldcat type slis_fieldcat_alv.
clear: fieldcat, pt_fieldcat[].
ls_fieldcat-tabname        =                'REC'.
ls_fieldcat-edit           =                ' '.
    ls_fieldcat-fieldname      =                'PERNR'.
    ls_fieldcat-seltext_s      =                'Employee #     '.
    ls_fieldcat-seltext_m      =                'Employee #           '.
    ls_fieldcat-seltext_l      =                'Employee #           '.
    ls_fieldcat-datatype       =                'C'.
    append ls_fieldcat to pt_fieldcat.
There r coupole that's missing
But there couple that show's up like this one
    ls_fieldcat-fieldname      =                'STIME'.
    ls_fieldcat-seltext_s      =                'ST   '.
    ls_fieldcat-seltext_m      =                'St Tm     '.
    ls_fieldcat-seltext_l      =                'Start Time          '.
    ls_fieldcat-datatype       =                'C'.
    append ls_fieldcat to pt_fieldcat.
    ls_fieldcat-fieldname      =                'ETIME'.
    ls_fieldcat-seltext_s      =                'ET      '.
    ls_fieldcat-seltext_m      =                'Et Tm           '.
    ls_fieldcat-seltext_l      =                'End Time             '.
    append ls_fieldcat to pt_fieldcat.
I always reward points.
Thanks

hi Anwarul,
Try the following code:
* CALL_ALV
form call_alv.
* v_repid = sy-repid.
perform build_field_catalog using field_tab[].
perform build_eventtab      using events[].
perform comment_build       using header_alv[].
perform build_sorttab       using gt_sort[].
* perform build_layout.
* v_variant-variant = '/TEST3'.
* Call ABAP List Viewer
call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
      i_callback_program      = v_repid
      i_callback_user_command = ''
      i_structure_name        = 'REC'
      it_fieldcat             = field_tab[]
      it_special_groups       = gt_sp_group[]
      it_sort                 = gt_sort[]
      i_save                  = v_save
      is_variant              = v_variant
      it_events               = events[]
*      is_layout               = gd_layout
    tables
      t_outtab                 = REC
    exceptions
      program_error            = 1
      others                   = 2.
endform.
form build_field_catalog USING pt_fieldcat type
                               slis_t_fieldcat_alv.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
I_PROGRAM_NAME = sy-repid
I_STRUCTURE_NAME = 'REC'
changing
CT_FIELDCAT          = pt_fieldcat.
When you export to excel, the character fields and numeric columns gets re-arranged, but all the fields will be displayed in this case.
hope this helps.

Missing content exporting from InDesign CC 2014 to Flash Pro CC 2014

Dear all,
to produce a larger number of similar animated swf's, I wanted to create all necessary text and graphic layers in InDesign CC 2014, then export as *.fla to Flash Pro CC 2014 for "bulk" animation.
Finally it should then just be a case of selecting the correct layers and publishing.
The problem: When exporting from InDesign to Flash, all layers are recognized but initially apart from the text layers they were shown as empty items without the content.
Rescaling the placed images in InDesign to be no larger than the final document helped to now also have the images when opening the exported *.fla in Flash.
I am still missing all other InDesign objects though, e.g. even a simple colored rectangular will not show in Flash.
Any help to fix this issue would be greatly appreciated. Searching for it only brought up a couple of tutorials that do not seem to have this issue.
Best regards
Christopher

I think that it's just a bug in InDesign. It happens with CS6 as well.

Leading Zeros Missing - When exporting data from ALV grid display to Excel

Hi,
Am exporting the data from ALV GRID DISPLAY to Excel sheet using standard toolbar icon 'Local file'
the leading zeros displayed in the ALV output is missing in the EXCEL sheet.
(eg) in ALV o/p - 0029.
in Excel - Only 29 is appearing.
As per the requiement i have to show the leading zeros in excel also.
Pls help on this issue.
Thanks in advance..

Hi ,
Please set the property :
wa_fieldcat-lzero = 'X' .
when you are creating field catalog for display alv data .
your prob will solved .
Regards ,
Nilesh Jain

One digit in customer number missing in Export to excel download

Dear All,
           We have a customized report for customer collection.The output of this report is as per desired. But when we download it to excel last digit in customer master is missing.That means say customer number is 1100051 while we export to excel customer number showing is 110005 , last digit gets missing. This is for all the customers.
          One more point I would like to state here. In that report we have 2 radio buttons. Bank Receipt and Down Payment . This error is coming only for Down payment radio button.
          Can anybody please help me solve this issue.
Regards
Abhijit

hi ABHIJIT DAS ,
debug and see the internal table values ,whether the customes is comming fully and also check the fiels length for
that customer .
regards,
chinnaiya P

Part of logo missing when exporting to PDF

I'm running ID CS6 and Acrobat Pro X.
When I export a document as a PRINT or INTERACTIVE pdf, part of my logo goes missing. The funny thing is that our design team are all running the same programs and 3 of our members can view the logo completely, the other 4 see half of the logo missing, I can see the logo just fine.
• The logo mark is visible, but the typography that is part of the logo is missing?! And it's a single grouped object in Illustrator.
• We've compared the settings on our teams' programs and on my ID program as well, and nothing seems be remotely related to the issue.
• Finder on Mac shows mixed visibility in file preview on different computers. Some show, some don't.
• In the past, I've been able to place vector objects from Illustrator into Indesign completely fine. I prefer vector over image because it allows me scaling flexibility.
• I have not changed any settings on my program between the time I was able and not able to do this. I don't understand why different people are getting different results on their screens. And in a couple of occasions, it has happened to one of our team members and it fixed itself mysteriously.
I would like to provide screen shots, but it is a private design.
One key note to realize is that the logo is completely outlined and grouped as a single object. I then save the logo into the same folder as the ID file (tried both, .EPS and .AI) and placed it (CMD+D) into InDesign. Both files are CMYK files.
I then make my PDF by hitting (CMD+E) to export, choose PDF Print. On the PDF settings, I choose [High Quality Print], compatible with Acrobat 5 and beyond, uncheck optimize for web, include bleeds, no color conversion.
I've had issues in the past where hidden layers in an .AI are still visible in the PDF. The .AI is imported into InDesign then exported as PDF... The hidden layers from the .AI preview in Finder, but then vanish when opening the PDF...so buggy.
Make any sense?!...

Similar to Mikey's response… If the logo has a spot color in it and it overlaps any raster image (or vice versa), then the overlapping part will appear white if "Overprint Preview" is turned off in Acrobat. This is really a bug. One possible fix is to export the PDF as an PDF/X-4:2010 in the "Standard" drop down—this preserves all transparency layering without flattening.
This issue causes frequent headaches and confusion in my workplace, especially since a lot of people want/need to hold on to the PDF/X-1a standard, which flattens the artwork.

PPro CS4 - half of audio is missing from exported files

Hi all.
I'm currently working on a project in PPro CS4, and by that I mean that I've already completed the project. It was exported and uploaded to youtube for my boss, no problems. Then he asked me to combine the two videos, so I copied the second half of the video and pasted it onto the first half's sequence. The settings I used for the two sequences were the same. When I play the video in PPro everything works fine. When I export the video, however, the audio is missing from the second half of the video (the half I copied). The second half audio is on the same track as the first half of the audio, so the audio levels on the exported video should be exactly the same.
I've been browsing the forums and looking at troubleshooting pages but I still haven't found a solution to the problem. The video is intact; only the second half of the audio is missing. I have no idea why it's doing this or how to fix it.
I'd appreciate any input.
-RD

Yes, if he is exporting one file of video and audio then either the entire track is exported
or only the work area bar is exported for both video and audio. If he is exporting video and audio separately THEN they might be different lengths.
You might right-click the audio for the second section and select Audio to see if it is muted.
Try exporting the audio alone without video, listen to the audio in Windows Medica player and listen if all or only half of it exported. If all of it exported, then that narrows the problem.
You might try creating a new Sequence and pasting the video and audio into the new Sequence (don't just duplicate the sequence, that may just duplicate the problem). Then export and see if that circumvented the problem.
What format are you exporting to?

Background missing when export to PDF CS5.5

Hi,
I have seen some similar posts (all non-current) to the one I am writing however, my issues are not solved by the solutions posted in previous discussions.
My problem is that when I am exporting an IND file to PDF, when I open the PDF all of my background images are missing. In most examples this is a full page black box. But since testing this problem I have encountered the same issue with any colour and some photographs.
I am working in CS5.5, with all software up to date (version 7.5.3)
I have tested this in new documents and old documents that previously would have exported the background.
These items are not on master pages. I have tested this on brand spankin new pages and existing ones (with and without any elements on master pages)
I have tested the boxes with and without transparency.
There is no issue with overprint or the overprint preview check box.
I have tried saving the file as an .IDML and reopening to see if it will 'debug' the file. I have exported the PDF as every kind of option. I have restarted the computer and the program several times. I have checked for new updates.
The only way that I have 'cracked' this issue so far is to break the one large background image into at least 3 overlapping solid boxes. It seems that you cant have any box overlap more than 2 page boundaries.
Is anyone else having this problem or any other advice on what to try.
Thank you

Hi Eugene,
The document in question is 1) not using master pages and 2) not using spreads. Its a single page A4 document.
Hi Peter,
Sorry I am not trying to span two pages. My comment was that the graphic box seems to glitch when it touches more than 2 boundaries of the page ie left right top bottom.
I am using the full creative suite CS5.5, no hacks, no substitute programs.
I have attached a few screen captures.
Sample file in indesign:
Screen capture when exported to PDF:
split the background box into 2 (i have used 2 blacks so you can see the boundary). Export to PDF:
Second example - black background with photo over top. In indesign:
Exported to PDF:

Chaper markers missing on export

Similar Messages

Maybe you are looking for