Chapter end action triggers General Error - Help please!

Hi, I am working on a project and have come to a big problem in the last hurdle, classic! Really need your help, experts!
I have 2 Timelines, each one with 6 audio tracks and 2 subtitle tracks
One of the timelines is longer than the other one because it has two different films in it.
Everything was working fine until I realised I had forgotten to set the end action to the last chapter of the first video in the timeline, I need it to either stop or return to main menu or last menu, otherwise it will go on to play the second film and i don't want this to happen.
When I set the end action to the chapter 10, it looks fine, I check and no problems.
But when it starts transcoding... after a bit, when it has transcoded all the languages it goes to prepare to build and I get GENERAL ERROR and it freezes.
Please please please if somebody can help me it would be very much appreciated.
Mariana
ps I have no overrides or anything like that in the whole project

Please list the Assets on each of the two Timelines with full detail. A screen-cap of each would probably be very useful and save you some typing.
Some things to also think about is are there any spots where your Audio is longer (even very slightly) than the accompanying Video? Are there any gaps on any of the Timelines? When you added that "End Action," exactly how/where did you add it? Also, if you have any Chapter Playlists, or Playlists, please give details on those.
Note: to attach the screen-caps, us the little "camera" icon on the editing screen:
Good luck,
Hunt

Similar Messages

"General Error (27)" Please Help!

I have been working on a video project in FCP for quite a while, and it is an important corporate video that I have invested a lot of time and money in. It is on an external LaCie Hard drive and I am using Fire Wire 800. Today when I go to open the project, it says
"Reading Project..."
and when it gets to about 47% a new window pops up that says "General Error (27)"
I am really scared and I need to finish the project up soon! If you can help me, I would deeply appreciate your time.
Andrew

Is there any other way to get into the file and delete what ever is corrupted. Hopefully the Photo Shop still will solve it. I just don't understand. I went to bed after working all day yesterday on it. I saved it but did not close FCP. I left the program on. Then this morning I went to edit and when I hit the space bar to play, the viewer, instead of showing my video, was green for some reason and the audio was making loud static noises. So i quite FCP without saving, and when I tried to open it back up: "General Error (27)" Weird
Andrew

After Effects PNG Sequence Error Help Please

When I try to render a png sequence I got the following errors
After effects warning: Could not create file <file path> Access was denie
Another message box saying
AEGP plugin PNGIO Support: Unable to create PNGIO
(5027::12)
Another message box saying
After Effects error cannot close a closed file
(3::5)
It renders a few frames and then it crashes with these errors. Please help THANKS

Here is my log
Adobe After Effects v12.0 (Windows 64) render log for project “Untitled Project.aep”
Rendering started on 11/8/2014 at 9:34:58 AM
11/8/2014 9:34:58 AM: Starting composition “cinematicsPre 2”.
Render Settings: Best Settings
Quality: Best
Resolution: Full
Size: 1702 x 953
Proxy Use: Use No Proxies
Effects: Current Settings
Disk Cache: Read Only
Color Depth: Current Settings
Frame Blending: On for Checked Layers
Field Render: Off
Pulldown: Off
Motion Blur: On for Checked Layers
Solos: Current Settings
Time Span: Work Area
Start: 0:00:04:10
End: 0:00:25:27
Duration: 0:00:21:19
Frame Rate: 30.00
Guide Layers: All Off
Skip Existing Files: Off
Output Module:Lossless
Output To:C:\Users\Matthew\Desktop\Youtube Stuff\ObeyRC\Sequence\1\cinematicsPre 2_[#####].png
Format: PNG
Output Info: -
Start Frame: 130
Output Audio: -
Channels: RGB
Depth: Millions of Colors
Color: Premultiplied
Resize: -
Crop: -
Final Size: 1702 x 953
Profile: -
Post-Render Action: None
0:00:04:10 (1): 3 Seconds
0:00:04:11 (2): 1 Seconds
0:00:04:12 (3): 1 Seconds
0:00:04:13 (4): 1 Seconds
0:00:04:14 (5): 1 Seconds
0:00:04:15 (6): 1 Seconds
0:00:04:16 (7): 1 Seconds
0:00:04:17 (8): 1 Seconds
0:00:04:18 (9): 1 Seconds
0:00:04:19 (10): 1 Seconds
0:00:04:20 (11): 1 Seconds
0:00:04:21 (12): 1 Seconds
0:00:04:22 (13): 1 Seconds
0:00:04:23 (14): 1 Seconds
0:00:04:24 (15): 1 Seconds
0:00:04:25 (16): 1 Seconds
0:00:04:26 (17): 0 Seconds
0:00:04:27 (18): 1 Seconds
0:00:04:28 (19): 1 Seconds
0:00:04:29 (20): 1 Seconds
0:00:05:00 (21): 1 Seconds
0:00:05:01 (22): 1 Seconds
0:00:05:02 (23): 1 Seconds
0:00:05:03 (24): 0 Seconds
After Effects warning: Could not create the file 'C:\Users\Matthew\Desktop\Youtube Stuff\ObeyRC\Sequence\1\cinematicsPre 2_00154.png'. Access was denied.
AEGP Plugin PNGIO Support: Unable to create PNGIO. (5027 :: 12)
After Effects error: cannot close a closed file. (3 :: 5)
11/8/2014 9:35:23 AM: Finished composition “cinematicsPre 2”.
Total Time Elapsed: 25 Seconds
Log closed on 11/8/2014 at 9:35:23 AM

Get general error message, please try again or contact support (49)

Just purchased a new HP computer with window 8.1 64 bit. Tried to download PS but the download fails. General error message states retry or contact customer support (49).

Hello,
I also get this problem.
MAC OSX 10.9.3
When I click update now it open the creative cloud tab from the menu bar where the update shows that its installed??
I have also found it difficult updating versions via MAC. Please help..

Delayed chapter end action

Having end actions available for all chapters is a great advance - but I seem to have a problem with it in practice. The clip keeps playing for a second or two after the chapter point before responding to the end action. This happens regardless of whether the clip is playing or whether you skip forward through the preceding chapters to the one with the end action.
I can sort of adjust the position of the chapter point to allow for this, and I think it is slightly better if I put 2 end chapter points the minimum legal distance apart (both with the same instruction) and of course I could edit the original video so this flaw (if it is one) would not be so noticable (but really this would require a separate edit for the 'play all' version - which would defeat at least half the benefit) - but I wonder if ther is a better solution?
Cheers,
Malcolm

Hmmm...
Are your source files .m2v or are you letting Encore transcode non-mpeg files?
.m2v
If you're letting Encore transcode, then are you adding the chapter markers after background transcoding using the Transcode Now command?
No, all files are encode from the PPro timeline with chapters named and in place. (I have since tried moving them back a bit on the Encore timeline and added a 'second stop' where Encore allows - but this is only after encountering the original problem)
I'm asking a lot of questions because I haven't seen the behavior you describe.
No problem - thanks a lot for your help.
If your source files are already transcoded .m2v or .mpg files, then this may be a chapter placement issue. Once a file is transcoded, Encore can only put chapter markers at GOP headers (I-frames). Since PAL(?) I-frames are about a half-second apart, you could be getting chapter markers in the finished DVD that are not where you thought they were. NTSC works the same way.
I understand this but it shouldn't be a problem if the chaapter points are put in on the PremPro timeline? (btw this was a PPro 1.5 project - I guess I could try it in 2 as well?) We work in PAL (and ony convert to NTSC if needed - it wasn't in this case).
Cheers,
Malcolm

HT4623 My ipad keeps crashing & now it won't come back on, just comes up to connect to itunes. Did that and tried a restore but just keeps comin up an unknown error, help please, I have so much on my ipad.

My ipad keeps crashing and this time it won't come back on it just keeps telling me to connect to itunes which I did and it just keeps telling me it can't restore this ipad because an error has occured! Really need help please?

If it keeps coming up with an unknown error - no error code given - try another computer. If that doesn't work, it's time to take it to an Apple Store or an authorized service center to have the device evaluated.

Itunes 10.4.1 64bit for Win 7 can't find quicktime, QTCF.dll error -- HELP PLEASE!

Every time I install itunes 10.4.1 64bit for Win 7, it says it is unable to find quicktime, then instructs me to uninstall itunes then install it again. I've done this several times but still have the same problem. There is also another promt that says quicktime can't find the entry point and there's an error having to do with QTCF.dll ... what is this and how can I get my iTunes to work? Help please!

hi guys i found the solution from a wizard of the community and it works, so u may try as follows:-
Correct Answer by b noir on Aug 24, 2011 8:13 PM
Let's try a standalone QuickTime.msi update. It may not install correctly either, but fingers crossed at least the error messages we get from that install may better indicate the nature of the trouble with the QuickTime install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the QuickTime.msi to do a standalone QuickTime.msi install.
Does it install properly for you? If so, does iTunes install properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

SQL Exception: General Error - Help Needed

Hi,
I am getting an error at QuerySales.executeUpdate() statement in the following code.
I never had this kind of problem with other examples using executeUpdate statement. I even checked with "addBatch" but got the same error. Please help me if you know anything.
Thanks,
Ravi
PreparedStatement QuerySales;
insertString= "insert into TestNoName values (?, ?)";
String query2 = "SELECT Number, Name FROM TestNoName";
Statement stmt;
try {
con = DriverManager.getConnection(url,"","");
System.out.println("Successfully Connected to Database");
stmt = con.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_UPDATABLE);
QuerySales = con.prepareStatement(insertString, ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_UPDATABLE);
ResultSet rs2 = stmt.executeQuery(query2);
for (int i=0; i<=10; i++)
rs2.last();
int count = rs2.getRow();
System.out.println(count);
if (count == 0)
lNumber = 1;
else {
lNumber = rs2.getInt("Number");
lNumber++;
QuerySales.setInt(1,lNumber);
QuerySales.setString(2,"Ravi");
QuerySales.executeUpdate();
System.out.println("Hi");
System.out.println("Exececuted SQL Statement- Inserted One Record");
System.out.println("Fields of TestNoName");
int count1=0;
ResultSet rs3 = stmt.executeQuery(query2);
//rs2.beforeFirst();
while (rs3.next()) {
count1++;
int n = rs3.getInt("Number");
String Name1 = rs3.getString("Name");
System.out.println(n + " " + Name1);
System.out.println(count1);
stmt.close();
con.close();
} catch(SQLException ex) {
System.err.println("SQLException: " + ex.getMessage());
}

I found the reason for error. I declared the result set object within the for loop. Now it is working fine.
Ravi

Xcode entering input error help please

When i run Xcode 4.5.2 on Lion and i need to enter some input (ex. cin.getline(array,10)), i need to press enter two times to keep going.
Here is the code:
player1 and palindrom are arrays of char
and here is the output:
I enter Juan in player1 then i press [Enter] and i need to press another [Enter] if i want the prgram to continue
and when i enter the palindrom is not stored in the array, instead the second [Enter] is stored on the palindrom array.
Help please
i dont know what to do i have looked on the internet but i havent found anything to solve this problem......

You are mixing up two different ways of getting user input.
1. getline -- a standard <stdio> function which reads user input and a return;
2. cin -- a C++ <iostream> function which reads user input and a return.
See http://crasseux.com/books/ctutorial/getline.html and http://www.htmlhelpcentral.com/messageboard/showthread.php?4359-C-Tutorial-1-cou t-cin for the proper way to use either one of them; you cannot use both in the same command.
quiban92 wrote:
i dont know what to do i have looked on the internet but i havent found anything to solve this problem......
Those two links were the very first hits on a search for "getline tutorial" and "cin tutorial".

Flash Action Script 3 is giving me 1120 error help please!

I am having trouble coding this tutorial. I have changed it a little to fit my photos. I am getting this error 1120 below:
Scene 1, Layer 'actions', Frame 1, Line 1    1120: Access of undefined property btn1.
Scene 1, Layer 'actions', Frame 1, Line 2    1120: Access of undefined property btn2.
Scene 1, Layer 'actions', Frame 1, Line 3    1120: Access of undefined property btn3.
Scene 1, Layer 'actions', Frame 1, Line 4    1120: Access of undefined property btn4.
I don't really understand the coding and need help fixing this problem. I believe their code is wrong because my gallery will not work from the tutorial.
The code I have is below:
stop(); btn1.addEventListener(MouseEvent.CLICK,play1); function play1(event:MouseEvent):void{ gotoAndStop ("rosie") }
btn2.addEventListener(MouseEvent.CLICK,play2); function play2(event:MouseEvent):void{ gotoAndStop ("mel") }
btn3.addEventListener(MouseEvent.CLICK,play3); function play3(event:MouseEvent):void{ gotoAndStop ("liz") }
btn4.addEventListener(MouseEvent.CLICK,play4); function play4(event:MouseEvent):void{ gotoAndStop("kayla") } ;
The code that was given to me is below: (Source:How to create a simple image gallery in flash cs5) :
stop(); btn1.addEventListener(MouseEvent.CLICK,play1); function play1(event:MouseEvent):void{ gotoAndStop ("young") } btn2.addEventListener(MouseEvent.CLICK,play2); function play2(event:MouseEvent):void{ gotoAndStop ("thoughtful") } btn3.addEventListener(MouseEvent.CLICK,play3); function play3(event:MouseEvent):void{ gotoAndStop ("dancing") } btn4.addEventListener(MouseEvent.CLICK,play4); function play4(event:MouseEvent):void{ gotoAndStop ("old") }
Can anyone help me with this tutorial or coding! That would be great. Thanks!!

Flash CS3 works with events.
To handle clicks you have to capture the click event
To load a link you have navigateToURL:
http://livedocs.adobe.com/flex/2/langref/flash/net/package.html#navigateToURL()

At my wits end with BT - can anyone help please?

This is a long and ongoing saga and so I apologise for the long post.
In February due to a change in job I needed to change the payment date of my DD payment. I did this online and received an email confirming the new payment date of the 28th. I stupidly assumed that was the date BT would take payment. The account is only used for Direct Debits and so money is put in there shortly before they're due. Over two weeks before the payment was due I received an unpaid DD letter from my bank. BT had attempted to take the payment early. I contacted BT and was assured my payment date was the 28th and they had no idea why payment had been attempted early. Later that day BT called to discuss the returned DD and I explained it was a BT error. A week later BT attempted to take the DD again. Once again I contacted them to be told my DD was definitely set up for the 28th and "there must be an error on the system" Later that day I received another call from BT to inform me my DD had been returned unpaid and again I explained that it was a BT error. Not trusting BT I cancelled the DD with the intention of making my payment online on the 28th. On 28th Feb before I had chance to make the payment I received a call from someone at BT who was mentioning late payment charges etc. I made it clear that any charges would be unacceptable as the error was down to BT and my payment wasn't actually late. I was asked to make payment over the phone but as it was difficult to understand each other I made it online and gave the payment reference number.
My online balance at this point showed as zero and so I decided against setting up another DD for BT to attempt to take money as and when they pleased. Late March I received a phone call from BT telling me my DD wasn't set up and I had an outstanding balance of £57.75. I explained I'd had a zero balance but it would appear that my online balance was showing incorrectly. The person I spoke to said he could set up a new DD for this amount but as a one off it would come out on the 13th - something to do with making sure payment was made before the new bill came out and it taking X amount of time for a DD to set up. This would be a one off payment and after it had been made I'd be contacted to set up a new DD.
On 20th April I received a call from UK based BT asking did I want to set up my new DD However to do this I would need to pay £120 over the phone. I asked why when I definitely had a zero balance, I'd received no bill and quite simply owed BT no money at that point. I was told there was a problem seeing all the data and somebody would call me back after the Easter weekend. Instead later that same day somebody else UK based phoned me asking me to set up my DD. I explained about the earlier phone call and she was confused as to why I'd been asked to pay anything as I clearly had a zero balance. I set up a new DD with her for £60 a month, payments to be made on 28th, starting 28th May. A few days after this my new bill arrived for £109.
On 5th May my bank called me to say once again BT had attempted to take the DD early but this time they'd attempted to take £109. Once again I called BT and this time spoke to an Indian gentleman who advised me to cancel the DD with my bank while I was on the phone with him, he'd cancel it at that end and then he would set up a new one. He said letters of confirmation would be sent out to me.
I sent an email to BT explaining all this and also saying I wasn't happy that they'd charged me £10 late payment charge on the new bill for unpaid DD. Had BT taken the payment when they should it wouldn't have been unpaid!! A gentleman phoned me back, assured me the £60 a month DD was set up for the 28th starting 28th May. He also emailed me confirmation of this.
On 9th May I received an email saying I had a "supplementary bill" so looked at my online account to see my bill had gone up by about £5. My DD wasn't showing as set up on the online account but I decided to leave it a couple of days before contacting BT. Later that day though I received three letters. One saying my DD had been cancelled as discussed, and two others saying my DD had been set up to be paid 28th of every month starting 28th May for the amount £104!
Before I had chance to call BT someone UK based called me to ask did I want to set up my DD as I had no payment plan set up. By this point I'd more than had enough and told her I had one email and two letters clearly saying my DD was set up and the only reason she'd be calling to ask me to do this would be if BT had cancelled the DD themselves. I refused to set up the DD yet again and she put me through to India based billing to discuss what was happening. I was told a DD wasn't set up on my account, that I couldn't set one up unless I paid my bill in full and that line restrictions are due to come into place on 29th May if the bill isn't paid in full.
Today my BT online account shows no DD set up. However my bank shows the new DD is in fact active. I have no idea when BT will take money, or for how much. I don't know what to do, do I cancel the DD and just pay all future bills in full when they come in and in doing so be penalised by BT for not paying by DD? Or do I just leave it and hope they finally get it right? Bearing in mind I've had two letters saying they're going to take £104 and an email saying £60 I can't see that happening.
It appears not one BT department speaks to the other, half the calls aren't logged and nobody at BT listens to the customer. I have spoken to Ofcom about this and they've advised me to give BT one more chance to sort this out and then go to the Ombudsman. I've just come across the forums and so am giving this a try to see if I can get any joy here.
At some point during all this I spoke to somebody UK based who told me to send my bank charge letters to BT which I have done but as yet have heard nothing in return! I've lost track of how many people I've spoken to and am at my wits end with it all.
Solved!
Go to Solution.

I'm even more concerned now after hearing back regarding my initial post. Apparently any cancellations or changes are showing as done by me using the self help platform on my BT account. This isn't the case. The actions carried out on certain dates listed on the email I received were all carried out by BT over the phone and not myself. I didn't even know it was possible to cancel a direct debit using the BT website. I thought it had to be cancelled at the bank and then a phone call to BT. I was logged onto my BT account while the phone calls were taking place but any action was carried out by BT and not myself.
BT are insisting I have no DD set up. Yet it clearly shows on my bank account that there is an active DD for BT. To confirm that, I've spoken to my bank today who have verified there is most definitely a DD set up to pay BT on the bank account. They've double checked the account number with me and it's definitely for my BT account. The bank are sending me a letter confirming it's an active DD for me to include all other details for the Ombudsman because I really feel this needs fetching to their attention.
To be fair to the person who has replied I have been told I can pay a small amount and set the DD up rather than pay in full or face restrictions. But despite BT's insistence that I have no DD set up my bank clearly states I have. I'm now going to have to cancel the DD that BT are sure isn't active and set it up again.
Incidentally the monthly payments I'm to make are £45 - less than the £60 and a lot less than the £104 previously mentioned! So on one hand I will have a satisfactory conclusion but on the other I have to still cancel a "none existent" existing DD, set a new one up and am out of pocket on bank charges caused by BT trying to take payment on the wrong date. I then have to trust they'll not do the same thing again.......
It's all like a stupid joke that's just not funny.

Running PowerShell Script to automate the installation of IIS feature - Add-WindowsFeature error, help please

I'm just learning PS scripting and Chef Programming, so I'm sure I'm missing something simple. I'm trying to run a recipe that is using PS as the interpreter. I've ensured I'm running PS in 64 bit with admin privileges, and have Imported the ServerManager
module. I even added a line to my script to have it run that first, but am still receiving an error in my script. I'm running this on a VM of Server 2008R2
Script:
powershell_script 'Install IIS' do
code "Import-Module ServerManager -passthru"
code "Add-WindowsFeature Web-Server"
guard_interpreter :powershell_script
not_if "(Get-WindowsFeature -Name Web-Server).Installed"
end
Error:
PS C:\Users\Administrator\chef-repo> chef-apply webserver.rb
Recipe: (chef-apply cookbook)::(chef-apply recipe)
* powershell_script[Install IIS] action run
    ================================================================================
    Error executing action `run` on resource 'powershell_script[Install IIS]'
    ================================================================================
    Mixlib::ShellOut::ShellCommandFailed
    Expected process to exit with [0], but received '1'
    ---- Begin output of "powershell.exe" -NoLogo -NonInteractive -NoProfile -ExecutionPolicy RemoteSigned -InputFormat
None -File "C:/Users/ADMINI~1/AppData/Local/Temp/chef-script20141224-432-mxaa9u.ps1" ----
    STDOUT:
    STDERR: The term 'Add-WindowsFeature' is not recognized as the name of a cmdlet, function, script file, or operable
program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
    ---- End output of "powershell.exe" -NoLogo -NonInteractive -NoProfile -ExecutionPolicy RemoteSigned -InputFormat No
ne -File "C:/Users/ADMINI~1/AppData/Local/Temp/chef-script20141224-432-mxaa9u.ps1" ----
    Ran "powershell.exe" -NoLogo -NonInteractive -NoProfile -ExecutionPolicy RemoteSigned -InputFormat None -File "C:/Us
ers/ADMINI~1/AppData/Local/Temp/chef-script20141224-432-mxaa9u.ps1" returned 1
    Resource Declaration:
    # In webserver.rb
      1: powershell_script 'Install IIS' do
      2:   code "Import-Module ServerManager -passthru"
      3:   code "Add-WindowsFeature Web-Server"
      4:   guard_interpreter :powershell_script
      5:   not_if "(Get-WindowsFeature -Name Web-Server).Installed"
      6: end
    Compiled Resource:
    # Declared in webserver.rb:1:in `run_chef_recipe'
    powershell_script("Install IIS") do
      action "run"
      retries 0
      retry_delay 2
      guard_interpreter :powershell_script
      command "\"powershell.exe\" -NoLogo -NonInteractive -NoProfile -ExecutionPolicy RemoteSigned -InputFormat None -Fi
le \"C:/Users/ADMINI~1/AppData/Local/Temp/chef-script20141224-432-mxaa9u.ps1\""
      backup 5
      returns 0
      code "Add-WindowsFeature Web-Server"
      interpreter "powershell.exe"
      cookbook_name "(chef-apply cookbook)"
      recipe_name "(chef-apply recipe)"
      not_if "(Get-WindowsFeature -Name Web-Server).Installed"
    end
[2014-12-24T10:29:56-08:00] FATAL: Stacktrace dumped to C:/chef/cache/chef-stacktrace.out
[2014-12-24T10:29:56-08:00] FATAL: Mixlib::ShellOut::ShellCommandFailed: powershell_script[Install IIS] ((chef-apply coo
kbook)::(chef-apply recipe) line 1) had an error: Mixlib::ShellOut::ShellCommandFailed: Expected process to exit with [0
], but received '1'
---- Begin output of "powershell.exe" -NoLogo -NonInteractive -NoProfile -ExecutionPolicy RemoteSigned -InputFormat None
-File "C:/Users/ADMINI~1/AppData/Local/Temp/chef-script20141224-432-mxaa9u.ps1" ----
STDOUT:
STDERR: The term 'Add-WindowsFeature' is not recognized as the name of a cmdlet, function, script file, or operable prog
ram. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
---- End output of "powershell.exe" -NoLogo -NonInteractive -NoProfile -ExecutionPolicy RemoteSigned -InputFormat None -
File "C:/Users/ADMINI~1/AppData/Local/Temp/chef-script20141224-432-mxaa9u.ps1" ----
Ran "powershell.exe" -NoLogo -NonInteractive -NoProfile -ExecutionPolicy RemoteSigned -InputFormat None -File "C:/Users/
ADMINI~1/AppData/Local/Temp/chef-script20141224-432-mxaa9u.ps1" returned 1

Hi There,
We have a application named Microsoft SCOM. That as well requires ISS to be installed. I tried this long back and it worked in powershell. Below is the powershell script i used to install IIS and some specific features from it. Hope it helps in altering
it and making one of your own script.
1. Launch the PowerShell command
prompt
Run this command
Import-Module ServerManager
3. Press Enter
4. Run this
command
Add-WindowsFeature NET-Framework-Core,Web-Metabase,Web-WMI,Web-Static-Content,Web-Default-Doc,Web-Dir-Browsing,Web-Http-Errors,Web-Asp-Net,Web-Net-Ext,Web-ISAPI-Ext,Web-ISAPI-Filter,Web-Filtering,Web-Windows-Auth,
Web-Mgmt-Console –restart
Gautam.75801

OSX Lion Crashing Intermittently Kernal Error HELP PLEASE!!

Please help, I am trying to get a project finished and the craash is getting more frequent, I have unplugged screens and Periperals and put in a new hard drive and a new operating system and its still happening... maybe its a ram error?
Interval Since Last Panic Report: 15467 sec
Panics Since Last Report:          3
Anonymous UUID:                    5A4156FC-86F7-5CE5-3A94-5C9C80C1A289
Thu May 23 15:56:00 2013
panic(cpu 2 caller 0xffffff7f994017f2): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff811de7c000 0x0a5480a2, D0, P2/4
Backtrace (CPU 2), Frame : Return Address
0xffffff8108ce3670 : 0xffffff8018c1d626
0xffffff8108ce36e0 : 0xffffff7f994017f2
0xffffff8108ce37a0 : 0xffffff7f994fe3b9
0xffffff8108ce3800 : 0xffffff7f994fe42e
0xffffff8108ce3870 : 0xffffff7f99824c82
0xffffff8108ce39a0 : 0xffffff7f99524fe8
0xffffff8108ce39e0 : 0xffffff7f99409567
0xffffff8108ce3a90 : 0xffffff7f9940705a
0xffffff8108ce3c90 : 0xffffff7f99409160
0xffffff8108ce3d80 : 0xffffff7f9a5fac4b
0xffffff8108ce3de0 : 0xffffff7f9a5f7e82
0xffffff8108ce3e30 : 0xffffff7f9a5e1815
0xffffff8108ce3e60 : 0xffffff7f9a59d2ff
0xffffff8108ce3e80 : 0xffffff7f9a59e5f0
0xffffff8108ce3ed0 : 0xffffff7f9a59b96b
0xffffff8108ce3ef0 : 0xffffff80190467a8
0xffffff8108ce3f30 : 0xffffff80190452aa
0xffffff8108ce3f80 : 0xffffff80190453d9
0xffffff8108ce3fb0 : 0xffffff8018cb2977
      Kernel Extensions in backtrace:
         com.apple.NVDAResman(8.1)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f993a4 000->0xffffff7f996b1fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f992a3000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7f99390000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7f9934d000
         com.apple.nvidia.nv50hal(8.1)[5F021999-8B18-3BD5-9B98-90617E638A63]@0xffffff7f9 96bf000->0xffffff7f999e0fff
            dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f993 a4000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f992a3000
         com.apple.GeForce(8.1)[A15BB65E-3501-340F-87CB-2FD2BAD33E35]@0xffffff7f9a595000 ->0xffffff7f9a661fff
            dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f993 a4000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7f99390000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f992a3000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7f9934d000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide:     0x0000000018a00000
Kernel text base: 0xffffff8018c00000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 131047881933
last loaded kext at 27964294567: com.apple.filesystems.smbfs          1.8 (addr 0xffffff7f9920d000, size 229376)
last unloaded kext at 113708455571: com.apple.driver.AppleUSBUHCI          5.2.5 (addr 0xffffff7f99c32000, size 65536)
loaded kexts:
com.logmein.hamachi          1.0
com.displaylink.driver.DisplayLinkDriver          2.0
com.apple.filesystems.smbfs          1.8
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.filesystems.autofs          3.0
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleHDA          2.3.7fc4
com.apple.driver.IOBluetoothSCOAudioDriver          4.1.3f3
com.apple.driver.IOBluetoothA2DPAudioDriver          4.1.3f3
com.apple.iokit.IOBluetoothSerialManager          4.1.3f3
com.apple.driver.AGPM          100.12.87
com.apple.GeForce          8.1.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.3f3
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleMikeyDriver          2.3.7fc4
com.apple.driver.AppleIntelHDGraphics          8.1.0
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.AppleMCCSControl          1.1.11
com.apple.driver.AppleSMCLMU          2.0.3d0
com.apple.driver.AppleMuxControl          3.3.0
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleIntelHDGraphicsFB          8.1.0
com.apple.driver.ApplePolicyControl          3.3.0
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.SMCMotionSensor          3.0.3d1
com.apple.driver.AppleUSBTCButtons          237.1
com.apple.driver.AppleUSBCardReader          3.1.7
com.apple.driver.AppleIRController          320.15
com.apple.driver.AppleUSBTCKeyboard          237.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.iokit.SCSITaskUserClient          3.5.5
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.3.1
com.apple.driver.AppleUSBHub          5.5.5
com.apple.driver.AirPort.Brcm4331          614.20.16
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.iokit.AppleBCM5701Ethernet          3.6.0b1
com.apple.driver.AppleAHCIPort          2.5.1
com.apple.driver.AppleUSBEHCI          5.5.0
com.apple.driver.AppleEFINVRAM          1.7
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleACPIButtons          1.7
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.7
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.kext.triggers          1.0
com.apple.driver.DspFuncLib          2.3.7fc4
com.apple.iokit.IOAudioFamily          1.8.9fc11
com.apple.kext.OSvKernDSPLib          1.6
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.nvidia.nv50hal          8.1.0
com.apple.NVDAResman          8.1.0
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.3f3
com.apple.iokit.IOSurface          86.0.4
com.apple.iokit.IOBluetoothFamily          4.1.3f3
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleSMBusController          1.0.11d0
com.apple.driver.AppleHDAController          2.3.7fc4
com.apple.iokit.IOHDAFamily          2.3.7fc4
com.apple.driver.AppleSMBusPCI          1.0.11d0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleGraphicsControl          3.3.0
com.apple.iokit.IONDRVSupport          2.3.7
com.apple.iokit.IOGraphicsFamily          2.3.7
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.3.0d51
com.apple.driver.AppleSMC          3.1.4d2
com.apple.driver.AppleUSBHIDKeyboard          170.2
com.apple.driver.AppleHIDKeyboard          170.2
com.apple.driver.AppleUSBMultitouch          237.3
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.5
com.apple.iokit.IOUSBMassStorageClass          3.5.1
com.apple.driver.AppleUSBMergeNub          5.5.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.5
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
com.apple.iokit.IOUSBUserClient          5.5.5
com.apple.iokit.IO80211Family          522.4
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOAHCIFamily          2.3.1
com.apple.iokit.IOUSBFamily          5.5.5
com.apple.driver.AppleEFIRuntime          1.7
com.apple.iokit.IOHIDFamily          1.8.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220.2
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          345
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.7
com.apple.iokit.IOPCIFamily          2.7.3
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.4 GHz, 8 GB, SMC 1.58f16
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334248312D4346382020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334248312D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.16)
Bluetooth: Version 4.1.3f3 11349, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST750LX003-1AC154, 750.16 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 5
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 9
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 3

Visit The XLab FAQs and read the FAQ on diagnosing kernel panics.
This panic is a possible sign of a failing GPU in your computer. To see if that's the case I recommend you disconnect all third-party peripherals, then boot the computer into Safe Mode and operate to see if your panics continue. If they do then take the computer in for service. If they stop then uninstall the LogMein and Display LInk software using their uninstallers. Be sure the extensions they install are removed:
com.logmein.hamachi          1.0
com.displaylink.driver.DisplayLinkDriver          2.0
Alternatively, be sure they are upgraded to Mountain Lion compatible versions.

Problem with downloading apps. "Unable to download application" error.Help please!

I'm having a major issue with updating or downloading apps. They won't download! I try to download an app, it's says "waiting", then it looks like it's about to download. Then, suddenly, the "loading" bar gets halway filled, then it goes back to saying "waiting". This cycles about three or so times and then I get this message: "Unable to download application. Could not be downloaded at this time" with choices to be "done" or "retry".
I have tried EVERYTHING to fix this. I tried pausing the download and restarting, I tried soft and hard resets, I tried signing out and back into the App Store, I tried resetting my settings, I tried restoring the phone as a new iPhone, nothing works! I am at my wits end! I have an appointment at the Genius bar tomorrow, but I'm hoping someone here can help me so I won't have to keep that appointment. I've tried searching for my problem in the forums but none of the results are like mine. Could someone please help?
EDIT: I also tried checking the iTunes queue. No purchases are stuck in the queue.

Just wanted to update, since I can no longer edit my original post. I tried disabling bluetooth. That didn't do any good, either.

Multi Mapping - BPM - Block 1 ( No Agent ) Error -- Help Please ?

I am trying the the BPM scenario using Integration Process
BpmPatternCollectTime
from SAP BASIS ® SAP BASIS 7.00 in
the namespace http://sap.com/xi/XI/System/Patterns
I have done the scenario like the above . I have followed all the Steps which are used in above scenario.
I am using a File Sender Adapter and Receiver Adapter .
It is Successfully picked up the File but nothing is happening after that .
I am using two receiver Determination one from Ob to IP and other from IP to FIleReceiver ( IB) .
But, I am Getting error as Block1 (No agent) Error in the PE graphical diagram
I have checked in SWWL my Integration Process Return code is "0"
Can you please tell tell me how to solve this ?
Can you please tell me this scenario is like Multiple Purchase Order Items to One Purchase Order
Here they have given ID adn OverAllNumber . For ex. In one xml file I am sending
ID as A100
OverAllNumber as 120
next 5 minutes putting the another file with contents
ID as A100
OverAllNumber as 130
My Question is
Will TWO files wiil come as Output in File Receiver or one file merged as like follows ?
ID as A100
OverAllNumber as 120
ID as A100
OverAllNumber as 130
I am not Clear in this please give some suggestions .
Best Regards.,
V.Rangarajan

Hi Raj,
          Thanks for ur reply.
While defining the receiver determination, sender agreement, receiver agreeement , Interface determination which Interfaces areu using?
                   Yes
+ by the way which pattern u are following the basis component , is it BpmPatternCollectMessage?+
              No . I have taken example as
BpmPatternCollectTime
from SAP BASIS ® SAP BASIS 7.00
in the namespace http://sap.com/xi/XI/System/Patterns
I have done the scenario like the above . I have followed all the Steps which are used in above scenario.
The steps Which i have followed in BPM are
1. Block with Deadlkine branch and Exception handler( as TimeOut Exception)
Block Start and Block End as New Transaction
2. Inside Block infinite Loop which contains Receive step ( Actives the Correlation ) and Multiline Container element which appends the Messages with CollectMessage
3. Transformation Step
It creates the New Transaction and Interface Maping from CollectMessage List to New Mesage
4. Send Step
               It sends the New Message . It creates the New Transaction .
Best Regards .,
V.Rangarajan

Chapter end action triggers General Error - Help please!

Similar Messages

Maybe you are looking for