Chapter id and Control code combination.(while doing J1id)

hi,
in J1ID material & chapter id combination,maintaing chapter id for material.the same chapter id is reflecting in material master in Control code field.
why it's happening?where these both having link.
thanks.

Hello Gobind,
Suppose if you maintain the material and Chapter ID combination in J1ID then system will automaticaly copy that Chapter ID in Material master -Control code field in (fireign trade Import view).
Actualy the J1ID program is having so many includes, in that this perticular include is having the Material master -Control code (MARC-STEUC) link with material and chapter Id combination (J_1IMTCHID-J_1ICHID), that include is LJ1I5O02
How they program links see here
**********pdate marc set steuc = j_1imtchid-j_1ichid
where matnr = j_1imtchid-matnr
and werks = j_1imtchid-werks.
Regards
Edit by: Mahesh Naik
Date:08.10.2010

Similar Messages

Bapi_Acc_Document_Post - E 018 : Invalid tax code and company code combination

Hi All,
I need the help of this forum once again.
I am using bapi Bapi_Acc_Document_Post to create KR documents in SAP. The bapi works absolutely fine except for one scenario:
For a particular type of invoice coded to Company "XXXX" with lines having tax code "I0", the bapi returns error message "E 018 : Invalid tax code and company code combination". The tax code "I0" and the company code "XXXX" has been mapped in SAP and if I try to create the invoice manually in SAP using the GUI, the invoice gets created without any issue.
I have tried searching the forum but could not find any post on this topic.
Therefore, requesting the masters to please help me out on this.
Best Regards
Sutirtha Roy

Hi Gowthami,
how have you solved your problem, because I am facing the similiar issue and trying desperately to post the following combination with BAPI_ACC_POST_DOCUMENT:
001 40       490100     Aufw. aus Marge PP              R2                 15,92
002 31       10000003   Kreditor                                R2                 15,92-
003 50       175060     Abzugsverfahren USt            R2                  3,18-
004 40       154060     Abzugsverfahren Vst             R2                  3,18
THANX!
Regards
Marko

Condition records and tax code combination table

CAn I know the table where both condition record and tax code stored.

Hi Jose,
I think you have quoted the tax procedure table. There i have not found the tax codes.
My requirement is both condition records and tax codes combination table.
I want to see for which condition type which tax code has been assigned.

Control key (^) combined shortcuts does not work on mac book pro

All shortcut combinations with the control key (^) do not work. I´m using Mac Book Pro 13 (late 2013) with Os X Mavericks 10.9.4

The Logic Board is the Main system board. In the Windows world better known as the Motherboard. Except with Apple Mac computers the CPU and the GPU are Soldered to the logic board and if it is a Retina screen model the RAM is also Soldered to it.
So replacing the Logic board is like replacing the compete system and costs accordingly.
But there isn't much else you can do if you can't get that switch unstuck. Or just go without sound from the built in speakers. They aren't that good anyway.

Ended with return code: === 8 === while doing transports from Dev to Test

Hi Experts,
We are doing transports from BD1 to BQ1 and getting this error message.
Could anyone please let me know why and what would be the solution for the following error message:
Execution of programs after import (XPRA)
Transport request   : BD1K900065
System              : BQ1
tp path             : tp
Version and release: 370.00.09 700
Execution of programs after import (XPRA)
End date and time : 20070803133308
Ended with return code: ===> 8 <===
Thanks in advance.
Best Regards,
Chandu.

Raymonds,
There is huge list of errors coming up. Some of them are as below:
Navigation attribute 0SALESORG is missing in characteristic 0PLANT
Navigation attribute 0SALES_DIST is missing in characteristic 0PLANT
Characteristic 0RT_LOCATIO: Referenced characteristic 0PLANT not (actively) available
Attribute 0INT_CUST from characteristic 0SALESORG not (actively) available
Attribute 0CRM_MKTELM from characteristic 0UCCONTRACT not (actively) available
Attribute 0CRM_MKTELM from characteristic 0UCCONTRACT not (actively) available
Hierarchy characteristic 0BPARTNER of characteristic 0UCCONTRACT is not active
Characteristic 0UCOUTLCONT: Referenced characteristic 0UCCONTRACT not (actively) available
Characteristic 0UCOUTLCONT: Referenced characteristic 0UCCONTRACT not (actively) available
Thanks in advance.
Best Regards,
Chandu.

What is -2000F error code mean while doing Internet Recovery?

My new macbookpro (1 hour old) crashed while trying to setup dual boot and now only works with internet recovery.
But no matter how many times i restart and connect via wifi it always shows www.apple.com/support follow by -2000F in second line.
What does this mean? Bad internet connection? None compatiable WIFI router? (Linksys E4200).
Thanks

Mike Yang wrote:
My new macbookpro (1 hour old)
You have 14 days to return the computer w/no questions asked. Plus you have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/your problems. A message board is the LAST place you should be.

Error code occurs while doing copy data from form to table

Error Code: -V: RABAX_STATE -e:UNCAUGHT_EXCEPTION
The ABAP call stack was:
Method: RAISEELEMENT_NOT_FOUND of program CL_WDR_CONTEXT_NODE

there was an error in your program lines
Please analyze the error and you can found the exact line of error in ST22 tcode
Once you open the st22, select your error and double click on it, then in left hand panel select " Source code extract".
then you wiil see your prg lines...
you will see the arrow like >>>>> in front of exact line error.
As per your errror seems, you have missed the node declaration part , some like that..any how check in st22
Regards
Srinivas

Getting error code 0x400110020000100b while doing system recovery for windows vista 32 bit.

I attempted to do a system recovery on my Laptop using the included recovery discs and got this error 0x400110020000100B. THe disc looked pretty beat so last week I ordered a new set. Now when I got to put disc 2 in (at 80% complete) I get the same error. I called customer support and he took me through the F9 process to no avail and I've also tried the F11 approach which got me no where. I'm frustrated because I really don;t have the money for a new laptop.
Laptop is a HP Pavilion DV6700.
Any help would be appreciated more than you know.
System is Windows Vista 32 bit
The guy on the phone said "well ya know thats a pretty old computer"...gee thanks..
This question was solved.
View Solution.

You're very welcome.

Synchronisation between pc reader and sony reader stopps while doing.

when i open pc reader the synchronisation begins. but it stops every time after about 10 books.
please help me

when i open pc reader the synchronisation begins. but it stops every time after about 10 books.
please help me

Code Combination Validation

Hello,
Has anyone setup Code Combination validations in Hyperion Planning? I have done it to a certain extent using forms or security. Is there a way to setup full blown code combination validation like it would be done in GL?
Thank you,
Nitin

Hi,
There is a method that works both at the web and smartview. It's quite straight forward and maintainable.
Prepare a query that would extract the combination data along with a dummy data column (i.e. 0 for all records). Load this data to Essbase, but when loading you should select a constant member from any dimension that does not exist in code combination. For example, you do not probably have segments in GL called version or scenario, likewise code combination usually does not contain period or year. So, load the data to a constant member from each of these dimensions (i.e. Begbalance, noyear, noversion, noscenario etc.)
In the next step you need to create dynamic calc members in any of these dimensions which you use at the column section of the forms. Usually it's only period but it might be necessary for other dimensions also. No matter in which dimension, The member formula for these members will be as below:
Begbalance->noyear->noversion->noscenario; this is in short the combination of constant members you use while loading the code combination.
Now edit a form and add a column as the first or last position, place this dynamic member and hide the column. If you have more than one dimension in the column that you used constant members in data load then placing the dynamic member from one of them is sufficient. For example, you might have both period and scenario on the column section. Then place only period dynamic member and select any scenario. On the rows section, enable suppression on missing data (not block). Ultimately, you must do this customization in all the forms you want code combination to kick off.
This way only the valid combinations will appear on the form and the others will be disabled. We are happily using this for a long time.
Cheers,
Alp

After updating to iOS 8 notification and control center won't open when unlocked

Ever since I updated my iPhone 5s to iOS 8, the notification and control center will not open while my phone is unlocked. I checked to see if I had it disabled in settings and it turns out I did not. I switched the Access Within Apps as well as the Access While Locked on and off anyway but still nothing. I can only pull the notification and control center open while my phone is locked... it is extremely annoying. I know I'm not the only one though because my friend who updated to iOS 8 on his 5c was having the exact same problems. Some help would be much appreciated. Thank you!

So yesterday vibration suddenly started working again, after nearly two weeks with the problem above. I have no idea why, I didn't change any settings and the only app that was updated yesterday was Facebook messenger...

Substitution rule for Business place and section code

Hello Friends,
We have a business place and a section code. I want to write a substituion rule for vendor invoice for business place and section code.
When i see in header, i am not find BUPLA and SECCO in header. I am finding them in line item. How do i get these fields in header segment. I tried substution rule in line item, but the tds is not deducted.
Thanks
SK

hi SK,
i am not understand your problem. Previously i face one problem regarding business place and section code. While booking invoices and advance payments the user forgets to specify business place or section code and some times he specifys wrong business place also. Basing on business place or section code we cant restrict the users because there is no authorisation object.
i created one validation that if my business area is 1000. then substitute the business place field with section code.
we have business place individual business area wise so i created this substitution.
Regards,
Sankar

Making Business Place and Section Code compulsory entry in Posting Invoice

Hi
How do we make Business Place and Section Code Compulsory while posting Invoices for a vendor
Regards
Sanil Bhandari

Dear Sir,
Could you send the document to me as well? I ll be very much thankful to you.
My email id is [email protected]
Thanks again,
Gov

While doing the hiring, at least one infotype was skipped (authorization)

Hi All,
While doing the personnel actions (Hiring), 0000 and 0001 infotypes are skipping. straight away its going to 0002.
System is displaying the message, at least one infotype was skipped (authorization)
Thanks and Regards,
Revathi.

Hi,
While doing the personnel actions (Hiring), we are able to enter the 0000,0001 and 0002 infotypes. remaining infotypes are skipping.
Thanks and Regards,
Revathi.

Using caps lock key as caps lock and control key

I'd like to use the caps lock key as caps lock and control key. While I can convert the caps lock to control key very easily, there seems no way to make it both caps lock and control. Is there any way to do this? I use emacs and it'd be really useful to be able to do this.
Thanks.

Finally found something that worked for me. See this thread and look for the post about removing the Hitoolbox plist files.
http://discussions.apple.com/thread.jspa?messageID=10765093&#10765093
I removed all of them. (Had multiples) Also make sure you empty the trash afterwards.
Then restart.
Then I used the modifier key trick in this thread. Turned off the caps lock key. Then restart.
Then use the modifier key trick and turn the caps lock key back on. Test to see if your lights come back on for the caps lock key.
If so, next time you restart it should still work. Finally. This thing has been dogging me for a long time.

Chapter id and Control code combination.(while doing J1id)

Similar Messages

Maybe you are looking for