Chapter Id problem

Hi,
Facing some problem while creating Excise Invoice when chapter id is different.
step-1. Creation of Sale Order (VA01).
     system accept material with different chapter id.
step-2. Outbound Delivery (VL01N)
     system accept material with different chapter id.
step-3. Excise Invoice for Delivery @ Depot (VF01) Type : JEX
     system create different Excise invoice no for different chapter id.
step-4. Creation of Billing Document (VF01) Type: F2
     system create single Commercial Invoice.
Anybody knows how to stop to create different Excise Invoice for Different chapter id.

Hi Himanshu,
This seems as a CIN problem, Take help of MM consultant to set a flag for the Chapter ID.
I am not sure about your ECC version; I am not able to re-create scenario. give me some more specific info. on your scenario I will try to solve it with help of MM consultatns.
Hope this will help you,
Darshan.
<i><b>*Pl. reward points to helpful ans. It motivates us to answer *</b></i>

Similar Messages

Chapter Marker Problem - Similar to post but not solved

This is my first export since upgrading; in the past all I've ever done was create chapter markers, export to QT and import into DVSPro and poof done. Life is good. Now there are no markers in DVSP. I read a thread about this same problem and it was solved with a right-click to "Add Embedded Markers." That doesn't work for me. The green markers appear in the Timeline & Canvas. I did intentionally put markers into the video & audio tracks themselves so that when I added footage at the front of the sequence I knew where to add markers into the timeline. But, again, there are chapter markers in the Timeline that show in the Canvas. HELP.

EXPORT DIRECTLY THROUGH COMPRESSOR from FCP.
It succks but the quality (especially sync sound) is best. The time is SLOW though!
Oh...don't forget when you lay down your tracks to right click on the time line in DVDSP to "show embedded markers.
I guarantee this will work!!!
Message was edited by: ggree
Message was edited by: ggree

IDVD 6 Chapter Menu Buttons all leading to 1st Chapter/New problem.

I've got a pressing issue never previously encountered. iDVD 6 Chapter Menu Buttons all leading to 1st Chapter! I've tried reloading the iMovie file after checking chapter markers. The problem has persisted. This is due to client tomorrow. I've been trying to understand the problem since yesterday, but a workaround solution is acceptable now. Please respond soon. Thank you. -bhgallen

bhgallen,
Were your chapter markers placed in accord with: Setting chapter markers at http://docs.info.apple.com/article.html?path=iMovie/6.0/en/imv1110.html ?
It reads in part: IMPORTANT: You cannot add a chapter marker to the very beginning or end of your movie. (iMovie HD automatically adds an initial chapter marker at the beginning of a movie.) It's also a good idea not to add a chapter marker within a transition, or within one second of a transition or other chapter marker. If you do so, other applications may have trouble recognizing the chapter markers.
F Shippey

Chapter Jump problems

When my dvd production is ready and when I watch it in the simulator, there is no fluent jump from one chapter to another chapter. And the same goes from track to track.
The first frame of the new chapter is freezing for about a second.
When I burn the dvd the same problem occurs. When I play the video in the viewer everything is alright. Does anyone know what causes this problem?

Make sure your chapter end jumps are left as 'not set'. It sounds like you've set them to jump to the next chapter which you do not need to do. If you have, a cell command is being read, which is not seamless and causing the pause,
-Jake

Chapter Markers Problem

When I export to Compressor from within FCP, the chapter markers appear in compressor. If I export a non-self contained QT Movie from FCP and drag it into compressor, they markers are not there. I am saving with "All Markers" selected and have never had this problem before. Any ideas?

Glad you found a solution.
For what it's worth, All Markers, despite the name, isn't all it's cracked up to be. In fact, it's inferior to DVDSP Markers if you're looking to export out to Compressor for DVD work. DVDSP Markers, in addition to (manually placed) Chapter and Compression Markers, include automated markers - Edit/Cut Markers - at each cut point, including the beginning and end of a transition. (The more you have to hammer down the bit rate, the more they make a difference, in my experience). Edit/Cut Markers are not available to Compressor if you export using any other markers setting.

Troubleshooting a Vobulator Error, Line 332 - Chapter Marker Problem? Is Beginning of Timeline OK?

Hi, I am getting the vobulator error on a Encore CS6 project...
"internal software error: Vobulator\Title Planner|CVOBUPlanner.cpp, line 332"
I have spent a couple hours tonight reading all the forum discussions I can on this trying to troubleshoot my problem.
First question I have is regarding the advice of "no chapter markers on the end of a timeline".
Does the beginning of my timeline qualify as an "end" that I should not have a chapter marker on?
I have one timeline in this project with about 18 chapters in it.
The first chapter is at the beginning of the timeline - seems logical to me to put a Chapter 1 in at the start.
But maybe that is wrong, since the begining of the timeline IS the starting point of the DVD?
But how can you label the start (i.e. I want to lable it "Act 1") if you don't use a chapter marker?
Also I noticed the Chapter 1 Marker got moved in to the 1 second point after transcoding. I set the chapter in premiere pro cs6 at the 0:00:00 point.
Some details on my Encore CS6 Project...
1 Video Timeline in Encore, Dynamically Linked from Premiere Pro CS6
No Menus
No Other graphics
Intent is to Auto play on loading, and stop at end action, with chapters in between for skipping around by user.
I get this error when I try to build a DVD Image. I get no errors when building a Bluray image.
Premiere Pro CS6 Project...
raw video was shot as 1080p24 video from a Canon Vixia HF S21
a few cross disolve transition at beginning and end
a few graphics at beginning (but I have successfully used all of these same graphics in other Encore projects without error).
-Thanks for your help.

Yes, not having a chapter marker at the end only refers to the end that is at the end. Not the end that is at the other end.
While logically the question is a good one, Encore puts a chapter marker at the beginning whether you want one or not. And one way to get this problem is to think you've faked Encore out by putting the first chapter marker two frames in.
You can label Encore's Chapter 1. I thought you had to wait till you were in Encore, but in CS6 at least, you can name it in Premiere,
If you are seeing a chapter at one second; you may have 2. In a test, Encore does not move the marker when I transcode.
Be sure you are not seeing a poster frame marker.
And it may be a different chapter marker or some other problem that is throwing the error.
I assume there is only one Premiere sequence on your one timeline, correct?
From your description, I would look for an accidental chapter marker too close to another one.
I would start over with a new Encore project.

Chapter +1 Problem

It's a simple scenario.
I have create a new timeline ,and drag 2 video clip on the timeline and add 2 chapter point.The DVD end action sets the chapter clip to makes the DVD looping,and then burn the DVD,no any menu and other thing.
My problem is the final DVD will be have 3 chapter point appear.After the second clip there has a chapter 3 but there is nothing(blank,0 sec.)
i make sure there only has 2 chapter on the timeline,how to prevent the third chapter point appear,thanks!

When you add multiple clips to a timeline, Encore automatically creates chapter points at the joins.
If you are also adding your own chapter point(s), then there may be 2 chapter points adjacent to each other.
Can you delete the last chapter point?
NOTE: This is a different situation than the "invisible" chapter point.

Chapter playlist problem

dvd plays as it should on dvd-r with 23 chapter playlists.....when exaclty the same project is burned onto a duallayer disc some of the chapter playlists do not work correctly....returns to menu before end of the chapter (overrides not touched)

all assets on one timeline ....auto layer break setting in encore
tried imgburn & selecting the layer break position
...makes no difference.....adobe say it is dl dvd problem & not their
software despite no make of dual layer disc working.

IPad chapter marker problem

My video has discrete sections with one second of black between each. Chapter markers are inserted on the first video frame of each section, making each section a chapter. When the video is selected on iPad and played back as a whole it works fine, skipping chapters works just as it should, moving to the first video frame of each chapter. However if a chapter is selected from the chapter menu, playback does not begin where the marker is. Rather, playback begins one or two seconds before the marker, either in the black that falls between chapters or in the end of the previous chapter. This problem is only true when the video is played on the device, it plays back in iTunes perfectly. Anyone know how to fix this problem?

If you make changes to an iMoive that was already in an iDVD project it's recommended you start over with a new project. There's a bug/problem with iDVD in it does not deal with modified assets in an existing project.
OT

Chapter Marker Problem

Following changing my imovie project and updating it in iDVD the chapter markers did not work. How do you correct this problem?

If you make changes to an iMoive that was already in an iDVD project it's recommended you start over with a new project. There's a bug/problem with iDVD in it does not deal with modified assets in an existing project.
OT

Editing chapter buttons problem

Hi
I'm trying to alter the font and size of the text for my chapter buttons on my submenu. I single click to select the button I want, and then click again but it keeps taking me into the movie instead of highlighting the text! I know this should work as I've done it before - are there any tips in how to do this successfully or another way of doing it?
Many thanks
Ian

You don't need to highlight the text to change size and font. Click once on the button to select it, and then open the buttons panel to change font and size.
You need to click twice on the button if you want to edit text content, but wait a few seconds between clicks.

Quicktime Pro 7.6.5 for Windows - Chapter Tracks problem - Preloading?

Hi there,
I have Quicktime Pro 7.6.5 (which is the latest I believe) for Windows and I'm trying to add a chapter track. I'm using Apples tutorial at http://www.apple.com/quicktime/tutorials… and I'm up to step 10. In my Other Settings tab under chapters all I have for options is "none" (see? http://i50.tinypic.com/30958wk.jpg) which means there is no properties popup and I can't make it preload.
Please help? As I'm on Windows I can't use Garageband or whatever, the only programs I have is the CyberLink DVD suite, Windows Movie Maker (for Vista if that matters) and some form of muvee, though I dunno which one.. I also have Showbiz 2 on a disc somewhere.
Thanks
(PS: to get this straight, it will work on a DVD right? If I put a chapter track on then burn to DVD when I put the DVD in my player the chapter track will come up?)

QuickTime Pro does not play .wmv files. It doesn't export them without some other third party software.
Try reading the steps and supported file formats before your complain about what it does, or doesn't, do.
http://www.apple.com/quicktime/pro/specs.html
http://www.apple.com/quicktime/tutorials/creatingvideo.html
http://www.apple.com/quicktime/pro/faq.html

Chapter markers problems

Following updating my iDVD project, having change music, the chapter markers do no work. How do I fix it?

iDVD issues better posted to the iDVD forum:
https://discussions.apple.com/community/ilife/idvd
Where the iDVD experts are.

QTpro chapter marker problems

The chapter title list in the pop-up menu to the right of the timeline is not reflecting what I typed into the text file. Everything works fine up until the point where I deselect the check mark in the text track. I'm using numbers as chapter markers so after entering them 1,2,3,4,5 I end up with 1,1,3,3,5. Any ideas as to what I'm doing wrong?
Carlos Hernandez

Bruce Lutz wrote:
Does your reference to the annoying habit of putting chapter markers as pink into the clip intend to convey that these markers (plain, chapter, compression) will not transfer to DVDSP via any method available?
That's correct, clip markers will not be written out to a QT Movie (or to directly Compressor) in any way that DVDSP can read.
The only exception is if you're exporting a clip directly from the Viewer. But I don't know anyone who does that.
I put markers in the clip intentionally so they would remain when using the speed utility to slow down captured video from old film that is too fast. If I am not able to get them into DVDSP along with the clip, is there a method to convert or transfer them to the top of the timeline (and make them green) so DVDSP will recognize them?
No method to convert or transfer clip markers to timeline markers. Clip markers need to be recreated in the Timeline and, of course, flagged as Chapter markers.

Chapter marker problems

I set chapter markers in Final Cut Pro using the "edit marker" Dialog. and when I exported, under markers, I tried choosing "chapter markers" and "DVD studio pro markers" both. Neither one worked....when I imported in DVDSP there were no markers. Is there something else that has to be set in DVDSP to get it to recognize the chap. markers?

Bruce Lutz wrote:
Does your reference to the annoying habit of putting chapter markers as pink into the clip intend to convey that these markers (plain, chapter, compression) will not transfer to DVDSP via any method available?
That's correct, clip markers will not be written out to a QT Movie (or to directly Compressor) in any way that DVDSP can read.
The only exception is if you're exporting a clip directly from the Viewer. But I don't know anyone who does that.
I put markers in the clip intentionally so they would remain when using the speed utility to slow down captured video from old film that is too fast. If I am not able to get them into DVDSP along with the clip, is there a method to convert or transfer them to the top of the timeline (and make them green) so DVDSP will recognize them?
No method to convert or transfer clip markers to timeline markers. Clip markers need to be recreated in the Timeline and, of course, flagged as Chapter markers.

Chapter Id problem

Similar Messages

Maybe you are looking for