Chapter Marker Not Recognized Error Message

I'm about to export a 15-minute Final Cut Sequence
with 23 separate Chapter Markers to Compressor for
use in DVD Studio Pro, but when I try, it gives me the error
message that
"1 of your Chapter Markers is less than 1 second from your selection.
If you Continue, this Chapter Marker will be ignored."
How do I
a) Identify which of the 23 markers it is
b) make the change (as I don't understand the error, all my markers are separated
by minutes if not many seconds)
Thanks

You know, I actually had markers right on top of each other
in middle of sequence
It's ready to export, i'm just not sure if
I need to enable Markers to export anywhere
in Compressor or Final Cut

Similar Messages

"USB Device Not Recognized" error when I connect iPod to my PC

I have a brand new 5th gen (I think) iPod.
I have been able to connect it successfully to my home laptop, download music to it and play it so I know the iPod works per se and the cable is ok too.
Now at work (where tons of my music is) when I connect it to my PC here and I get a "USB Device Not Recognized" error pops up from my taskbar. When I click on the message it pops up a "USB Device Not Recognized" window which displays a list of USB ports, and shows "Unknown Device" for the one where the iPod is connected.
I think its probably USB1.something as opposed to USB2.0 but from what I understand that shouldn't matter.
Can anyone suggest anything ?
I've tried the 5R's as far as I can, and I read through this thread:
http://discussions.apple.com/thread.jspa?threadID=500559&tstart=15
but there didn't seem to be anything conclusive.
Thanks for any help,
Jill

First make sure the latest iTUnes is installed on this work PC, IF your allowed to install things on it, the latest iTunes version is 6.0.4.2 and can be downloaded from the apple site (Hit iPod+iTunes tab at the very top of this web page)
Another thing is what version of windows is the work PC? Is it windows XP Windows 2000 Or windows Me 98? iTunes will only run on XP and 2000

Why do I keep getting "format not recognized" error?

Hello,
I was trying to play any of the video podcasts from Nick Jr (e.g iCarly, Drake and Josh) for my kids and I kept getting a "format not recognized" error on my APple TV and when trying to play on my PC with iTunes, the video doesn;t play at all. This seems strange to me as these podcasts are rated in the Top 10 under "kids and family" genre so they must be working for others. I was able to play other podcasts in this genre such as the Sesame Street podcast. Any ideas why these Nick Jr. ones aren't working for me?
Thanks!

I have been having the same problem - with podcasts AND with Movies and TV Shows bought through iTunes. I was hoping the recent 3.0 upgrade would fix it, but no such luck. While this was an occasional problem with iTunes 8, it seems to have turned chronic with iTunes 9.
The annoying "solution" that seems to work is to unplug and replug the Apple TV and quit and restart iTunes. Even then, while watching TV Shows or Movies continuously it seems to work, but after any interruption, either due to shutting off the Apple TV or letting it go to screen saver for an hour or so between shows or movies, iTunes loses it from the device list, and the "format not recognized" message returns.

Device not recognized error

When I try to connect my Ipad1 to PC, I get the "device not recognized error". I tried to connect the Ipad to my Macbook Pro, I get no reaction, the computer does not see the Ipad, does not give a message either.
I re-tried with different cables, different PC's, latest version of itunes etc.
I can charge the Ipad through the wall outlet, no problem for that.
Do you think it is a hardware problem with the USB interface of the Ipad, or a software issue? If so, what can I do to solve this?
Thank you

Here's some relevant information:
http://support.apple.com/kb/ts1591

Boot Device Not Found Error Message

I've had my laptop since May 2011. HP Pavilion dv6
Quad-Core AMD Phenom II 2.2 GHz
DDR3 SDRAM 8 GB
500 GB Serial ATA 7200 rpm hard drive.Originally Windows 7 64-bit upgraded to Windows 10 64-bit One morning I turned on my laptop and I received the following error. The laptop lives on my desk, hasn't undergone any major changes, and I haven't moved or dropped it. I've run every diagnostic test from the F2 menu. The hard drive and memory both passed, the system tune up passed, and I've restored the BIOS to the default settings with no changes. If I hold the power button and restart the laptop usually on the 2nd or 3rd attempt the system will start normally with no issues and continue on as if nothing is wrong. This is a helpful work around but it doesn't solve the problem which is a bit of an annoyance and leaves me worried that eventually it might refuse to start at all. Thinking that a system restore might help I ran a recovery and brought it to an "out of the box" state. After that failed I decided to go ahead and upgrade from Windows 7 to Windows 10. I performed a clean install keeping none of my programs or personal files. Despite a successful Windows 10 install I still receive the same error every time I restart. The short version:When I turn on my laptop I encounter a Boot Device Not Found Error Message.My hard drive passes diagnostic tests.My laptop will start eventually if I continue to power cycle it.

@pkharel ,
Hello and thank you for posting on the HP support forums. So that I can better help you here with this hard drive issue . Can you explain what diagnostic you ran on the hard drive.
Did you run the diagnostics from the BIOS?
HP Notebook PCs - System Diagnostics (F2)
HP PC Hardware Diagnostics
If you have attempted the diagnostics from the BIOS and are not finding the Hard drive. See if you can find the hard drive in another computer. If you can not find it using another computer replace the drive. If you can and it is not located on your notebook then you have a possible issue with the motherboard.
First thing I would do is try and restore your BIOS first.
Restoring the BIOS
After attempting this and you still can not find the Hard drive and you can see it in another system please contact HP phone support for repair options.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
If the hard drive is not detected in another system then replace hard drive.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Server not found error message

This is the second time I've "posted" this problem. Maybe the first time didn't take.
I get SERVER NOT FOUND error message.

What main page? I take it you did not write your message on the bad
Firefox. There are several things that could be the problem.
Some problems occurs when your Internet security program was set
to trust the previous version of Firefox, but no longer recognizes your
updated version as trusted. Now how to fix the problem: To allow
Firefox to connect to the Internet again;
* Make sure your Internet security software is up-to-date (i.e. you are running the latest version)
* Remove Firefox from your program's list of trusted or recognized programs, then add it back. For detailed instructions, see
'''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet?esab=a&s=Configure+firewalls+&r=0&as=s Configure firewalls so that Firefox can access the Internet.]''' {web link}

Hp 5535 will not scan, error message printer not found

I have a HP Envy 5535. I have only been able to scan one time with it. I scanned 22 documents, after running HP Scan Doc 4.4. Each time the HP Scan Doc states that everything is OK, yet as soon as I try to do even a test scan, I get the error message "Printer not found." I have also tried to run this scan with my McAfee virus firewall off, and it still doesn't work. I have also identified it on McAfee as part of my network.
This question was solved.
View Solution.

Hi @prazdancr,
Welcome to the HP Forums!
I am sorry that you cannot scan with your HP Envy 5535, but I am happy to help!
For further assistance I will need to know:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please try going through this scanning guide. A 'The computer is not responding' Error Message Displays During Scanning.
Hope to hear from you soon, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Firefox is very slow to respond when opening and nearly always stops responding altogether even refusing to react to Task Manager "End Program@ command. The "not responding@ error message also comes up during navigation on line.

Firefox is very slow to respond when opening and nearly always stops responding altogether, even refusing to react to the Task Manager "End Program" command. The "not responding" error message also comes up during navigation on line. Several attempt have to be made to get on line. A loss of stability seems to be endemic at the moment.

Try following the instructions here: [[Firefox hangs]]

"Firefox is already running but is not responding" error message and recent firefox update

"Firefox is already running but is not responding" error message is continuously popping up after the recent firefox update. I have nearly exhausted every possible solution to the problem as seen from the support page for this error message. I know someone who has the same issue on their computer and it also started right after the recent big update. Does the update have anything to do with this reoccurring issue? Is anyone else having this problem? Any other ideas on how to fix it? It would be great to get some help.

From what I have been reading from other posts on this forum, the
issue may be caused by the clear history settings.
Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Privacy'''.
The button next to '''History''', select '''Use Custom Settings'''.
At the bottom of the page, turn on '''Clear History When Firefox Closes.'''
At the far right, press the '''Settings''' button. Turn on ONLY '''Cache''' and
'''Form And Search History''' leaving the others off.
This is not a cure but will make it easier if Firefox locks up.
'''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s''' {web link}

"Not Found" Error Message Problem

Hi All!
I have a really weird issue happening that I have not found a post for in the boards, although there are some similar ones. I have a video project that I had been working on about a month ago and finished except for credits (I had no problems while working on it then). I finally just got the list of names to use for the credits, so I went to open the project to add the credits and I got a "Not Found" and "Out Of Memory" Message. I have 134.6 Gigs open on the Raid I save everything to, so I know I'm not actually out of memory. So I changed the settings to 80% Application and 50% Stills b/c I have around 10 jpegs I was using for titles in it. That seemed to help at least get the sequence opened. I then had media offline messages for those titles, eventhough they are in the browser and defined as online, so I just reconnected each one individually anyway. That helped with that problem. However, I FCP won't render the transitions around the titles. I deleted the transitions and titles and tried to re-render the video clips that were involved in the transitions with the titles. It won't render those. When I try to view the clips in the viewer, I get the "Not Found" message again. I reconnected a couple of the video clips individually, but I still get the message when I try to view them in the Viewer. The clips in the sequence are there and play in the canvas but not in the viewer and I get the "Not Found" message. I have it set to view the image without wireframes, so that's not the problem. The source videos are read as online in the browser and are in the same place as they were when I originally started the project, so that's not the problem. I've tried different variations on the memory usage. I've tried copying and pasting to a new sequence but get the same problem. Does anyone know why all of a sudden I can't view any of my source video and the clips I used in my sequence in the viewer and why it would give me the "Not Found" error message?
Some Specs that might be helpful:
FCP HD 4.5
Dual 2 GHz PowerPC G5
2.5 Gigs DDR SDRAM
Raid 1 with 134.6 Gigs Available Space
SD NTSC DV Footage - MPG files I transfered originally from the client's portable hard drive
A Few JPGs of Photoshop Titles
I'm sorry this is insanely long, but I wanted to provide as much detail as I could.
Emily

They were originally on a PC. That quite possibly could be it.
I just checked all the titles again and they are all RGB.
Our Raid ocassionally has problems, so I'm thinking it might have something to do with that.
I'm going to try on Monday to just re-import the videos I need into the project and see how that goes. If anyone has any suggestions, I'll take a look on Monday and see what happens.
I was just hoping that someone might have had this problem and knew what to do.
Thanks for your help!

TS1544 "keychain not found" error messages pop up all the time, please help!

Hi, Ive been constantly getting "keychain not found" error messages ever since i updated to OS X and cant sync messages, facetime, calendars etc. i've tried keychain first aid and get this message:
Verification started
Checking keychain configuration for Lee (user ID=501)
Home directory is /Users/Lee
Checked login keychain
Error: login keychain not found
Unable to get info for ~/Library/Keychains/login.keychain, reason: The operation couldn’t be completed. No such file or directory
Checked default keychain
Checked keychain search list
Problems were found; you should choose the Repair option to fix them
Verification failed
Can anyone help?
Thanks

Is there a login.keychain in /Users/username/Library/Keychains/? The message says not. If not, create a new one or restore the one residing in your bootable backup/clone or Time Machine backup.

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.
Has anybody come across this error and found a fool-proof solution? I have found some stuff on the web but nothing seems to work. In particular this one on the Apple Help doesn't:
http://support.apple.com/kb/HT4700
I have a W2K3 server where the volume is. It's a new Mac with OSX 10.8 and is connecting with AFP (I don’t want to move to SMB yet). There are older Macs with lower OS and all of them work fine. I have checked all the basic stuff and it is set-up correctly (hosts file on Mac, network, etc.).
Any help greatly appreciated,
Cheers,
Ian

This may work for you:
http://www.zdnet.com/mavericks-smb2-problem-and-fixes-7000022519/

Package does not exist error-message

When I try to compile a java servlet with the following piece of code I get a compilation error referring to the import statement.
I have just included the initial import statements. A large number of errors follow, as a result of this 'package does not exist error-message'.
Has anyone encountered this or any ideas?
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.* ;
import java.io.* ;
import java.sql.* ;
import com.ericsson.snf.mps.mppapi.mtlr.*;
The error messages come from the 'import com.ericsson.snf.........' statement.
I am trying to integrate ericsson software, into my application.
Thanks,
java-mobile-user

That's probably because you are trying to integrate j2me suff with j2se/ee. That won't work without los of extra work..

Facetime is not available error message, any suggestions?

facetime is not available error message, any suggestions?

Hi ftruseljr,
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link to see more details and screenshots.
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
Cheers,
- Judy

'Bluetooth not available' error message since upgrading to Leopard

Hi, I regularly seem to get a 'Bluetooth not available' error message since upgrading to Leopard, any ideas why, have to reboot to shake it.
cheers
Simon

I solved the same issue by resetting the SMC. With the computer off, remove the battery and press and hold the power button for 5 seconds. Then reinstall the battery and restart. I haven't had any bluetooth issues since.

Chapter Marker Not Recognized Error Message

Similar Messages

Maybe you are looking for