Chapter markers FCP iDVD5

I exported from FCP via Quicktime Conversion to preserve 16:9 aspect. The exported sequence was used in iDVD5 to burn a dvd and everything was fine except for missing chapter markers which were correctly incorporated in the FCP sequence. Was there
anything in the export process that might have upset this? Any suggestions gratefully received.

Yes, it does. You're not doing it correctly. People have been doing this for a decade. I don't think you're the first person to make an anamorphic DVD in iDVD.
You can also in Movie Properties for the whole file, not the video track, in Presentation check the aperture and make it clean, but that depends on the QT version you're using. Or as the page describes you can change the video track to 1024x576 with preserve aspect ratio unchecked.
It might help to know what version of the software you're using. I suspect it's all pretty dated based on the computer and the OS you're running.

Similar Messages

Chapter Markers FCP X

How do you add chapter markers in FCP X?

Ron,
I explain this in detail here: https://discussions.apple.com/thread/3271525?start=0&tstart=0

Chapter Markers are off from where I set them in FCP HD

I just completed editing a Hip Hop concert with 12 performers. I put chapter markers at the start of each groups performance in FCP HD. When I exported my project I included the chapter markers as well. I used the new iDVD5 to burn the DVD. I DO have DVD Studio Pro but am not effecient with that yet. Anyway, after the long encoding process and burn, I watched the DVD on my set top DVD player.
When I tested out the DVD skipping from one group to the next, it wouldn't go right to the next group! For some reason the markers were coming up 20-30 seconds before the next performance! So you would see the end of the performance you are currently watching before it switched to the next scene or in my case next group.
The Chapter Markers are placed at the very begining of the groups performance so why after I burn the DVD is it putting the markers up to 30 seconds before where I want it?
Should I try to move the markers forward about 20-30 seconds or so? This is annoying because its perfect in FCP HD but its not placing them in the right places in iDVD5. I should be able to skip to each group as if it were a scene in a movie.
Any suggestions?

All your problems are related to not having the Record Keyframes button on (A). If you create a keyframe point for your mask position and then advance a few frames in the timeline and start moving those mask positions, a new keyframe is NOT created. Instead the points for the mask shape, INCLUDING the the keyframed position are re-positioned relative to the amount you moved them.
If you are going to manually set keyframes (not at ALL recommended), then you have to set the keyframe BEFORE you make any changes to the mask.
Andy

Chapter Markers won't appear on Marker list in FCP X settings when trying to Burn a Standard Definition Disc

Help,
Trying to burn an SD DVD disc in FCP X from the Share menu. I've set Orange Chapter Markers with Titles in my project from the timeline and these don't appear when I check the box to use chapter markers for Subtitles in the Destinations box to burn a DVD. I've set a photo in the main menu and it appears with the Title of my Project, but in the Chapter Menu it only shows the default list of Chapter 1, Chapter 2, etc. Shouldn't my Chapters show up on the list after I set them up on my timeline in the project? Also, I did burn a disc with my Chapters not showing up the chapter list and my disc only plays from the Main menu with the picture inserted. There's a slash line in the Chapter list button stating I can't use that option and I can't play chapters. Trying to get this project out the door before January 20, 2013. Can someone please help?
Thanks,
Dave

This "Share" feature behaves the same in both FCP7 and FCPX (it may actually be the only thing they have in common).
Since the specification for DVD-Video does not support titled chapter points, the text that you have entered for the marker does not appear on the burned DVD. You only get DVD chapter points at the same time index as the time code position of the FCP marker (and even then, it's at the closest i-frame of the MPEG2 GOP structure). Also, the first frame is always "Chapter 1". So, if your first FCP7/X marker at two minutes is named "Later that day...", then on the burned DVD it will appear as "Chapter 2".
Checking "use chapter markers for Subtitles" was a good guess; however, this feature turns extended markers into subtitles (a very, very quick way to create subtitles, but limited when compared to what can be done in DVD Studio Pro).
Could a QuickTime movie burned to a DVD-R/+R work instead of a DVD? QuickTime chapter markers support text.
-Warren

FCP video chapter markers not accepted by DVD SPro

When I had FCP chapter markers in the timeline and then used compressor, they appeared in DVD Studio Pro. But in realizing that I couldn't cut out any footage in FCP without ruining all of the markers I had made following that point in the timeline it was suggested that I add chapter markers onto the video itself. The markers were no longer visible as windows in the Canvas, we got them to appear in the Viewer (view-playhead sync-open). BUT... Now, these markers attached to the video (and not the Time line) appear to not be working when I open a compressed sequence in DVD Studio Pro. How can this delemna be solved?

Ok, so if this is true (about "Chapter Markers set in FCP to work in DVD-SP, they HAVE to be set to the Timeline"), does it not seem a little silly for FCP (using latest Studio updates etc) to give people the option of utilizing "chapter" markers set to the video if they don't actually work?
By the way I'm using all of the latest FCS updates and exported using File: Export: Using compressor and then opening up DVD SP and importing assets etc.
Could there not be an easier way rather than having to wait until the VERY end of the editing process to add Chapter markers to the Timeline because otherwise they get all wacked out of sink if you cut out or add any video/audio?

FCP-X Compressor 3.0.5 (need chapter-markers)

Can I send a FCP-X-project to Compressor 3.0.5?
I just need to set DVD-chapter-markers in there!
Or do you have another idea how to set individual chapter-markers??

This is more evidence that Apple really is not catering to a professional audience. Their agenda for a while has been digital-only content. They focus on getting finished products to ipods, ipads, and apple TVs.
Even consumers have complained about iDVD being ignored over the years in terms of feature set. I bet the next iLife will be the one to not include it.

Export fcp 5 to compressor, bye-bye chapter markers

If I'm reading the manuals and the pro training books right, the only way to export chapter markers from FCP 5 is to a QT movie. That kinda stinks a little.
Would a workaround be to export to QT and then run compressor as stand-alone? Seems like an extra step, more time and a possiblity of introducing artifacts from all of the handling.
I also tried to export markers as text file. DVD SP can import a chapter marker text file.
My original plan was to create the chapter markers in Compressor so I would get exact i-frame placement, but what a royal pain! At least in FCP you can bang through them with keyboard shortcuts.
- Eric

How much space is left on that external drive? As to the rez of your timeline, pick the sequence, and select Command-0 (that's a zero). The dialogue box will tell you what codec you're working with.
Without knowing anything else, you will definitely experience better performance by exporting to a different drive than your media is on - that drive is being asked to both read and write at the same time, which slows it down considerably. If you can export it to a different drive, you can expect to see your export time cut perhaps in half.
However, six hours is still way too long. There's some other problem going on here, it may be the drive being too full or perhaps the rez of your sequence is really high.

FCP 7 Chapter Markers

I have a ProRes 422 clip (captured from Canon XHA1S - HDV) when I 'M' and 'M' again to place a marker and description including ticking the 'Chapter Marker' button it all works. I then export from FCP using current settings and export all markers. The produced .MOV file has the chapter markers ok( I can see them in Quicktime player) but when I workflow thro Compressor (to get my .ac3 and .mv2 files) into DVDPro the chapter markers are gone. I know I have left out a lot of detail about settings in Compressor but in effect I select the Make DVD template option with no changes but can you spot anything obvious I am missing or do you need mor info to tell .. if so when else would help you determine the cause. Many thanks in advance !
Jim

I'm still learning Final Cut too, so I hope I'm not misinforming you, but I've had that problem before and it was b/c the markers were on the clips themselves or on the audio track vs. on the timeline. When you hit "M" for marker make sure nothing is selected so the marker goes onto the timeline itself. You should see them along the top under the render bars, not within the clips or audio.
I think that might be your issue. I've had so many people on here helping me, I feel inclinded to try to help others, but not sure I'm in that category yet

FCP 6 doesn't seem to export chapter markers in a QT movie

Hi,
New user of Mac and FCP 6 here. I've constructed my sequence in FCP 6, adding the appropriate chapter marks (which show up fine in FCP 6). I then Export my sequence to a self-contained QT movie, making sure that in the Save dialog "Marker" is set to "All Markers". If I now render the QT movie and bring it into either Compressor or DVD Studio Pro; the chapter markers are now gone.
After trying for several hours in FCP 6 to export different ways, I never could get Compressor or DVD Studio Pro to find the markers. I eventually gave up and manually reentered them into Compressor. When Compressor was complete, I brought its m2v and ac3 files into DVD Studio Pro. Lo and behold the chapter markers were still there.
Being a novice to FCP 6, do I have a setting somewhere that is preventing me from exporting markers? Or could this be a bug due to my workflow.
Thanks for any advice.
Mike

I've been wondering about this for the last couple of days. Lately my QT exports of my FCP sequences have not been retaining their chapter markers. They are fine for DVDSP, but not for Quicktime DV or even mp4 or m4v files that would normally contain them previously. What's going on here?
Sending friends and family my videos, I want to give them the option of selecting from the list of chapters in the video. I feel like I've wasted time putting the chapters in when they don't show up for the folks who play them.

Chapter markers out of FCP???????

I've read some previous posts but am still confused? I've been exporting straight into Compressor with chapter marks and it's been working great in DVDSP.
Now I'm exporting using File>Export using>Quicktime. I did a test with all the examples with chapter markers, DVDSP markers, etc. BUT none of my markers come up in DVDSP after using a Droplet on my desktop????
Please help. Why is it when I use a Droplet from an exported quicktime movie that my markers are not showing up in DVDSP????
Thanks,
Jonathan

Hi everyone and can I just say thank you to everybody who helped me on this and other requests for assistance. This is a formidable forum. I've learnt so much just by browsing through the topics in general and there are clearly people out there who care very much about sharing tips and experiences.
Anyway back to the topic - chapter markers not coming across from FCP.
Yesterday, my revised workflow succeeded in getting 16 out of 18 chapter markers across ( which I can live with though not sure why the delinquent two failed to complete the journey ). So what I learnt ( and this contradicts the manual and the Lynda.com tutorials ) is that it is important to put no text into the Marker Dialogue box where it says Comment ( one of you guys stated that ) , it is really important not to make the marker both a Chapter marker and a Compression marker ( I know that that's stating the obvious !! but I was desperate to try every set of possibilities ) and the workflow only then works when you select Chapter Markers when making the QT movie. It DOESN"T work at all when you select DVD Studio Pro markers for some reason.
One thing I've inferred from the forum is that these things tend to vary according to which versions of ( say ) Leopard, FCP, Compressor and DVDSP people are using. A number of people have mentioned that workflows that worked previously no longer work, as newer versions of the various programmes are installed.
It's a minefield but at least it's not Vista !!!!!!
Thanks again to everyone , I've learnt so much from this forum. Cheers Doug

FCP Chapter Markers/Compressor

I have all my chapter markers in my sequence in FCP all set and I want to export with compressor so I can use the two files and load them into DVDSP.
If I export with compressor, will it automatically recognize my chapter markers when I bring them in for a chapter index in DVDSP?
I know you can do this with Quicktime movie export, but I honestly prefer Compressor so I was wondering if it will automatically do this itself within the program.

Hi Jonesi, I would highly recommend that:
• you *DONT "send to compressor" from FCP timeline or 'EXPORT to COMPRESSOR*" from FCP timeline because it is simply too slow. Instead create a EXPORT AS QUICKTIME MOVIE with (a QT reference MOVIE (dont tick "self contained qt time movie" in the QT dialogue box". . The use the refernce movie as INPUT to compressor.app. Try it it works great! MAke a compressor DROPLET for fully automated work flow.
• _Chapter markers should be made on the TIMELINE that is used for the final EXPORT_. +Beware not to use CHAPTER markers in nested sequences.+
hth
w

FCP Chapter Markers

Hello - I created Chapter Markers (pressing M twice) Then exported as MOV. Dropped the MOV file into Toast 11. Burned BLU-RAY and no Chapters were created.
Any ideas?
FCP 7

First off, I don't know that Toast even does chapters. Anyone know?
Second, you say that you created chapters markers in FCP by hitting m twice. That alone won't create chapter markers. When you hit the m the second time, the markers window will open and then you have to click on CHAPTER to actually make it a chapter marker. Otherwise, it's just a plain marker. That said, I don't know if FCP's chapter markers, which were meant for DVD, will work for Blu-ray even if Toast did recognize them.
-DH

Exporting Chapter Markers from FCP cuts movie. Help.

Exporting a 90 min movie with chapter markers to a quicktime file for DVDSP.
When I play it back, it starts half way through on a random chapter.
Why is this happening?
I've tried exporting from the browser and the timeline.
Help?
F
Mac Book Pro Mac OS X (10.4.8) Mac Book Pro, intel, FCP 5.1.2
Mac Book Pro Mac OS X (10.4.8)
Mac Book Pro Mac OS X (10.4.8)

Is there an in point set on the timeline?
Does it only happen when you export with markers?
How are you exporting? Reference movie? Self-contained? Conversion?
Where are you playing it back?

Error Exporting Chapter Markers from FCP X

After upgrading to Final Cut Pro X 10.0.8, I am having problems exporting chapter markers. Specially, at the end of the export, this error message appears and cancels the entire export:
Error Message: "The operation could not be completed because the chapter marker track could not be written (error -12769)."
As you can see, none of my markers are closer together than one to two minutes, and the error message appears whether I have a marker at the very beginning of the project, or occurring a few frames in.
The only report of this problem on Apple's support forums was caused by trying to read FCP X 10.0.5 markers in 10.0.6. In this case, all my markers were created in 10.0.8.
This error persists even after trashing FCP X preferences and moving marker positions.
The file will export perfectly when chapter markers are not included in the export.
At this point, I don't have a good workaround.
Thanks,
Larry

Hi I have this same problem right now!
Mac Mini
OS 10.8.5
FCP 10.0.9
No recent upgrades, nothing has changed.
It had been working fine since I bought the Mac Mini + software in 2013…)
I have already tried removing the markers, deleting all markers and making new ones, creating a new project and pasting the old sequence into it (without markers), creating new markers in the new project, etc...
I still cannot create a master file (unless I deselect 'use chapter markers'), or unless I select a range of the project which does not include markers!
Please Help!

Exporting chapter markers from FCP

I'm trying to export markers from my FCP (Final Cut Studio 2) timeline which I can then use as chapter points in DSP. I have exported the timeline with DSP markers but when I import the .mov into DSP no markers are apparent. Any suggestions.
Thanks in advance. x

Hello!
There is a few options here.
Personally I would suggest you send your timeline to compressor to encode to mpeg2 for DVDSP.
If you have placed those markers and made sure they are a <CHAPTER> in the comments section in your marker window, you can click add chapter marker in that window too, then the mpeg 2 will include those in DVDSP project when you import them.
(the marker window to make sure its a <Chapter> hit the M key when your play head is on the same frame as the marker.)
Bringing a quicktime into DVDSP has to encode the QT anyway... might as well do it right in compressor.
if thats not an option you can....
There is a way to import a "Marker List" but I dont remember how I did it. I just tried making a text edit document which I thought I did but that didnt work.
I will do some research and post back but I would suggest you encode your Project with chapter markers.
You can export using quicktime and include chapter makers too.. its a setting in your export options

Chapter markers FCP iDVD5

Similar Messages

Maybe you are looking for