Chapter/Section Numbers with extra "."

All,
First, thanks in advance for any help. I have an issue in which all my Chapter and section numbers have an extra "." placed after the last number. Therefore instead of looking like this:
1           Chapter Tiile
1.1        Primary Heading
1.2        Different Primary Heading
1.2.1     Tertiary Heading
it looks like this:
1.           Chapter Tiile
1.1.        Primary Heading
1.2.        Different Primary Heading
1.2.1.     Tertiary Heading
Does anyone know what is going on here?
Best,
Mark

Hi everyone,
Actually, I just figured out what the issue was. Essentially in the Bullets and Numbering options of the Paragraph Style we had entered the following in the 'Number' Field of the Number Style options:
" ^1.^2.^t "
rather than:
" ^1.^2^t "
Once I got rid of the red dot shown in the first example, everything was fine. Thanks!
Mark

Similar Messages

Chapter-section numbering

Hi - having strange issue with Chapter and section numbering (not page numbers). For example, Chapeter 1, then a 1 -1, 1 - 2,etc. Working in CS5 on Win7 platform.
In the Bullets and Numbering section of the style sheet for Chapter Head:
List type: Numbers
List: [Default] Level: 1
Numbering style: Format - 1,2,3,4,
Number: Chapter ^#:^t
Character Style: None
Mode: Start At: Continue From Previous Numbers
for the Section Sub-head:
List type: Numbers
List: [Default] Level: 2
Numbering style: Format - 1,2,3,4,
Number: Chapter ^H - ^#:^t
Character Style: None
Mode: Start At: Continue From Previouse Numbers
Restart Numbers at This Level is checked.
For some reason, the Cpater numbering jumped over Chapt 5 to 6. I rechecked the doc several times, no chapter 5 being applied anywhere. Then my Sections got messed up....and now Chapter 1 shows Sections 6 -1, 6 -2, etc.
I know I could convert these to text, but what a pain.
Any insights would be greatly appreciated!
Thanks!

I may have answered this myself:
The subhead section should have used a number code thusly: ^1 - ^#.^t , where the ^1
indicates the sirst level (Chapter Head).
Wow - a little confusing....

Chapter/section numbering bug

In the Layout inspector under the Numbering tab, it gives you the option of continuing numbering the sections or starting over at a number you select. As it should be. Only problem is, it restarts the chapter numbers at 1, not the section numbers at 1. Clearly, this is a bug that needs to be fixed ASAP.

Found the solution, although it's still confusing. If you're on a chapter title page, then the instructions you give under Section Numbers under the Numbering tab apply to the chapters, not the sections. But if you're on a section title page, it applies to the sections. A bit of re-wording would make this much clearer because right now, it looks like a bug.

Table of Contents and Section Numbering ??s

Hi, we are using CS6 and have a couple questions about trying to use automated section numbering and table of contents in a single document. We don’t do this often (actually, never used auto-TOC before), so I just want to see if I’m missing something obvious.
SECTION NUMBERING WITH SECTION INTRO PAGES
Our document (a style guide) is divided into sections. Each section begins with a section intro title page, which is basically just a blank page with the new section’s title nicely styled. We are setting up our sections as 1, 2, 3, 4, etc. And we would REALLY prefer for the page numbering to be ’1.0, 1.1, 1.2, 1.3, etc.’, where X.0 is the section intro page.
1) I can add the sections OK with a prefix of 1., 2., etc. But InDesign does not allow me to start the section numbering at ’0′, it must be ’1′. So my intro pages HAVE to be 1.1, 2.1, 3.1, etc. instead of 1.0, 2.0, 3.0 etc. Any creative workaround to solve this??? We really don’t want the intro pages to be X.1, as they have no content and we want the X.1 page to be the first with content on it, NOT X.2. How do people generally handle a section intro page?
AUTO PAGE NUMBERS AND TOC
We are trying to use the automated Table of Content feature and running into an odd issue. We have page titles on top of each page in a unique paragraph style (H1). We are adding the page number at the beginning of this paragraph using ‘Type > Marker > Current Page Number’ and a unique character style. It’s working fine on the pages, showing the appropriate section numbering we setup for the document (e.g., 2.1, 2.2, 2.3, 2.4, etc.).
But when we make the table of contents, the ‘page numbers’ at the beginning of the titles are coming in as absolute numbers (e.g., 7, 8 , 9, 10, 11, etc.) instead of our section numbering. I checked the General Preferences, and it is set to ‘View: Section Numbering’. And when I exported an interactive PDF, the bookmarks also add the absolute page number at the beginning of the titles as in the TOC. But if I set the TOC to include page numbers automatically, those DO display correct section numbers (they just precede or follow our titles with the incorrect numbering).
2) Any ideas why the TOC and PDF Bookmarks would be picking up absolute numbering while the actual titles on the pages show the proper section numbering?
THANKS!

Peter Spier wrote:
I've never tried adding a second marker to a paragraph like that. Why not use a numbered list instead?
Just checking in here. Not sure I understand what you mean about using a numbered list. Do you mean instead of the page numbers in the titles, or instead of the Table of Contents? Not sure how either could be automated to stay in sync with adding/removing pages and creating the TOC links and bookmarks in our PDFs.
- Is there a bug when the TOC pulls the specified title paragraphs and they have page numbers in them?
Thanks. Still trying to see if we're doing something wrong as this is the first we've played with TOC.

Book Chapter and Section Numbering

Hi,
I've been through the tutorials and cannot seem to find a solution to my problem. Maybe I'm missing something simple here. Basically, I'm writing a book and want each chapter in a separate document with contiguous section numbering. e.g.
Document 1.
Chapter 1
   Section 1.1
       Section 1.1.1
       Section 1.1.2
            Section 1.1.2.1
   Section 1.2
       Section 1.2.1
       Section 1.2.2
Document 2.
Chapter 2
   Section 2.1
       Section 2.1.1
       Section 2.1.2
            Section 2.1.2.1
   Section 2.2
       Section 2.2.1
       Section 2.2.2
If I define the Chapter as a Section heading with a level 1 hierarchy and each sub-section with level 2, 3, 4, etc hierarchy, the above works fine within each document, but section numbering always stays at 1 in each document and doesn't increment when I make the book i.e all chapters remain at Chapter 1 within each document.
If I use the Chapter text variable, chapter numbering updates, but the section numbering isn't linked to the chapter number e.g. Section 2.1 in document 2 now becomes Section 0.1, since there is now no level 1 Section heading defined.
Please help,
Thanks.

Hello Eugene,
Thank you for the response. I actually ended up defining the Chapter as a level 1 section in Bullets and Numbering, but made it a new list called Section which is continuous across documents in the book.
This works great. Everytime a new chapter is added, numbering needs to be updated in the book panel.

Footnotes - restart numbering with every chapter (workaround)

Hello Everyone,
AFAIK there is no way how to reset the footnote numbering in ID CS4 (it would be ideal to have any possibility to choose the paragraph style, which could invoke that). There are available only three options for reseting, every IMHO quite useless for double sided documents - page, pair of pages and division (I have it localized so names can differ). My chapters starts always on the recto page. If individual 'divisions' would be created for every chapter and reseting set to the beginning of each that division, as the division starts on the verso page !!! (cannot be changed), it resets footnote numbers of the previous chapter if they appear on that verso page. But I agree that for single side documents this option would be sufficient for me.
Is there any workaround how to restart footnotes numbering with every chapter in double sided documents? Could it be scripted? I really need this...
Regards,
Jan

There you go. Don't forget, where it says "head", fill in the paragraph style name for your start of chapter style.
The first two lines delete ALL EXISTING SECTIONS, which may come in handy. If you defined some sections yourself (e.g., to change page numbering to roman numerals for some front matter) and wish to preserve them, you must DELETE these lines -- and manually delete all sections made earlier by the script as well.
//DESCRIPTION:Magic Section Marker
// A Jongware Script 8-Sep-2010
// Dangerous Curve: Remove *ALL* existing Sections
while (app.activeDocument.sections.length > 1)
     app.activeDocument.sections[-1].remove();
// The script Proper
// Find the style using the regular Find command
app.findTextPreferences = null;
app.findTextPreferences.appliedParagraphStyle = "head"; // <- Change Me.
list = app.activeDocument.findText();
// Loop over the found items
while (list.length)
    // Fetch next item -- a Text -- and get the Frame it's in
    next = list.pop().parentTextFrames[0];
    // It might be nested somewhere 'deep' so go up and up in the chain until ..
    while (!(next instanceof Page || next instanceof Spread || next instanceof Application))
        if (next instanceof Character)
            next = next.parentTextFrames[0];
        else
            next = next.parent;
    // .. we find the actual page. First check if there isn't already a section ..
    if (next instanceof Page &&
        next.appliedSection.pageStart != next)
        // No -- let's add one! All settings are set to sensible defaults, it appears.
        app.activeDocument.sections.add(next);

Automated NUMBERING with Chapter Indexes?

I've figured how to use the Create Chapter Index command in the Menu menu, but subsequent menu pages keep restarting the numbering of chapters (chapters that I have entered using the Add Chapter POints at Intervals command).
Is there a way I can get each page to automatically continue chapter numbering? i.e., so the second page of a 6 chapter index starts with chapter 7?
I've only just figured the basics now . . .

I have not used this much, but there are two things I would look at.
First, consider doing all chapter setting before doing the chapter indexes. (I may be misunderstanding this problem. If so, ignore.)
I would also look at help regarding button offset.

Question about section numbering in InDesign CS3

How do I use section numbering (1-1, 2-1, etc.) throughout a book document? I have a Current Page Number at bottom center of each Master page and want to include the Chapter Number and a hyphen before the Current Page Number. I want to start numbering over with each chapter. Also, I would like to find out how to use a running header of the Chapter name in the Master Pages. Thank you.

There is a distinction between chapter and section numbers. Also, Book can have a special meaning, so let's see if we can clear up some stuff here, first.
Is this a single document which you are dividing into logical chapters by uing sections in Pages panel Numbering and Section Options, or an InDesign Book, which is a collection of individual documents, each of which might be one of your chapters, and each of which might also contain multiple sections. An individual document can contain many sections, each of which may have a prefix and a section marker, both of which are accessible for use in numbering pages, but an individual document can have only one chapter number.

Premiere CS3: How can you encode xml cue point data in the chapter section of a marker for FlashVid?

Hi there,
I'm a total newb to this forum, so hello adobe premiere community! I'm perplexed by Adobes documentation on Premiere (and I'm sure I'm not the first ) anyway on the live documents page below:
http://livedocs.adobe.com/en_US/PremierePro/3.0/help.html?content=WS9390BED7-9466-46ea-A0E A-3240F1AFC36C.html
it states that:
“The cue point data in the Chapter field of a sequence marker in Adobe Premiere Pro will be encoded as Flash XML. For the XML protocol required, see Flash Help.”
Which is great…except this information doesn’t exist seemingly in either the Premiere documentation or Flash either for that matter, but as I’m interested in working with the chapter/marker area in Premiere – should I really be told to go off and search the documentation for another application, probably not! What would have been useful would have been a code snippet saying you do it like this, but of course, that would make things too easy!
Basically, I understand that in After FX you can add Flash marker information specifically for interpretation when exporting to Flash Video (i.e. name, type and parameters etc) and it suggests that you can do the same above in Premiere CS3 using some kind of concatenated string in the chapter area…it just doesn’t tell you how anywhere seemingly – WHY ADOBE!
Currently when I export markers as cue points based on the advice in the page above, anything I put in the chapter section to force Premiere to create a cue point is converted to a string, which becomes the cue point ‘name’.
This cue point name is then automatically appended to the ‘time’ the marker was inserted at and is always encoded as type ‘navigation’, with no obvious means of adding ‘parameters’ into the equation.
So (finally) does anyone know if you can insert this information into the chapter area for correct interpretation by flash (i.e. thus allowing you to choose between either 'navigation' or 'event' types, and pass as many 'parameters' as you wish etc) or are you just limited to supplying a name, and it being automatically set to the navigation type with no parameters?
I’m sorry for this long essay but at least the issue is well defined for you to answer, honestly any help you can provide what so ever would really be most appreciated!
Best regards,
Kat
PS – I have utterly no knowledge of XML either just in case you were wondering – and my only interest in XML is getting this basic information encoded into the FLV file from Premiere Pro CS3! Please help, pretty please with daisy’s!!!

Hi dradeke,
Thanks for your reply, which is indeed useful as clearly Adobe have made this task easier and less obscure in CS4 by adding simple interface functionality, however I'm stuck with using CS3 for the moment. Its not majorly a problem as the video material in question can be exported uncompressed then setup with cue points using the Flash encoder as an alternative (i.e. or even After FX CS3 also) which both provide the same features as Premiere CS4 seemingly. It is just that it would be much easier to be able to drop in simple markers whilst working with Premiere CS3, as this is what we are going to be using primarily, I just wondered if anyone knew how to invoke this in CS3 - its possible you can't, the documentation is vague at best!
However I really appreciate your response and help, thanks

Section numbers inserted in TOC of epub output

I imported a word document into pages so I could convert to an ePub. All was going well, and then I did another test export as ePub. When I looked at the book on my iPad, I noticed that Section Numbers were now being inserted into the automatically generated table of contents as follows:
Section 1
Chapter title
Section 2
Chapter title
This was not happening earlier and I can't figure out what I did that might have triggered it.
What is causing this and how do I get rid of it? Help!
Thanks in advance.

Hi,
I followed your advice, and looked at a sample project - Employee Care. When I generated ePub output using this project, the output included a table of contents. However, when I specified a TOC in my project (see below), I still get the same message that the TOC file is missing. The project name doesn't contain any special characters.

Changing section numbers depending on order

I work on a lot of documents that have numbered sections. These sections are headed by "Section Title: Section Number" on the initial page and "Section Title: Section Description" on subsequent pages of that section. My problem is that frequently the names of the sections change as well as the order that they're in.
I set up custom text variables for the section titles. That seems to work well enough. I can go in and change the variable which changes all instances of it in that section. My bigger problem is that whenever a section get reordered I have to go in and manually update all the section numbers.
Is there a solution to this? Thanks in advance.

Does the section number appear on the document page somewhere, like in a heading? You'd normally pick up smething like that using a Running Head type variable, which can be set to pick up either a paragraph style (so it grabs an entire paragraph) or a character style (limited text). You can apply character style that is nothing but a name, with no acutal attributes, to selected text to make it work in the variable, if you need to.
You also have the choice of first on page or last on page. If there is no text on the page with the style, ID looks backwards through the document until it finds the first instance to use.

Automatic Section Numbering

Hello, just after some help with automatic section numbering in IDCS5.
What I have is a (currently) 50 page document split into about 15 sections. I would like to number the sections and pages so that they appear on each page 1.1, 1.2 1.3 etc
I've experimented with all the page numbering options but none seem to automatically update the 'section' number, I can only manually add a prefix.
The problem I have is this document will be a continually evolving thing and later on I may need to add a new section between say section 2 and 3. Is it possible to have all the following sections renumber accordingly, so 3.1 automatically becomes 4.1 and so on.
Thanks.

In the frame where you are putting the page number marker also add the Section Marker character. It's in the same list of markers under special characters as the page number markers.

Section numbers awry

CS3, ID5. Document has two chapters. When I added second chapter to doc, I created new section. In Pages panel, there's a black triangle visible over page 1 of the whole doc (i.e., at start of chap 1), and also on the page that starts chap 2.
Problem is that the RH, which contains Chapter number, has chapter 1 for all pages. I had expected it to pick up the number 2 for the chapter number in the second section.
In the Pages panel, when I hover over the first triangle, the message says "Start of 1" but when I hover over the second, it says "Start of Sect 1." So clearly something is different. But I'm not seeing what: what's causing the difference in section information, and why are all my pages in both sections flagged as chapter 1?
When I double click on the first triangle, hoping to edit it, here's what I see. What's my mistake?

Chapter numbers are different from Section numbers. A single document can have only one chapter number, but multiple doc can all have the same chapter number if you like (so that you can break up a long chapter in a book into logical sections for editing).
You should either use a section marker or prefix, or create a running head variable keyed to a paragraph style applied to the chapter number heading on the page.
Peter

Entering phone numbers with an extention in the contacts app?

How to enter a phone number in the contacts app phone number section so that it will automaticly dial the extention or pause and then dial the extention? i.e. (123) 123-4567 ext890
Can this even be done?
Thank You.

When you manually dial on a land line or with other cell phones, does it matter if you omit the "(0)"? Is it in EVERY number? What happens if you manually dial the iPhone with the (0)?
I don't know the official "standard" dialing format where you are, but what was programed into the iOS doesn't appear to require those characters, and the phone can't recognize numbers with them as telephone numbers.
In the US, land line carriers usually require a "1" added to the beginning of a long distance call to go through. Most cell carriers don't need the 1, but the call goes through with or without it.
You can provide feedback to Apple:
http://www.apple.com/feedback/iphone.html

I have an iphone4 and my husband merge his numbers with mine and i think it was deleted can you tell me how can he get his number back on his phone

have an iphone4 and my husband merge his numbers with mine and i think it was deleted can you tell me how can he get his number back on his phone

Do you possibly mean the contacts have been merged?
If so, where are each of you syncing contacts? A supported application on the computer? iCloud or another cloud service? An Exchange server?
WIthout details, it's difficult to offer specific resolutions.

Chapter/Section Numbers with extra "."

Similar Messages

Maybe you are looking for