Chapter Skip Reverse does not work

I have a track that is concert footage with chapter markers set at each starting of a new song. The client wants to watch a song and be able to skip to the next chatper. The chapter skip forward works correctly, but the chapter skip reverse skips to the previous chapter not the nearest chapter. I have seen commercial DVD and music CD and even iTunes work this way. Why or what I am doing work?

what program is this? it does not sound like dvd studio. if this in FCP then this what i do, i export it to quicktime and then import it into imovie and add chapter marker. then export it back out.

Similar Messages

  • Slow/Fast/Reverse DOES NOT WORK

    I have read other posts on this issue. When I attempt to apply this effect, it does not work. This is a new project in iMovie HD 6. Clips will not take this effect. It shows up in the preview fine but will not apply. Below is what I sent Apple. Any and all help (solutions) appreciated. Is anyone else using this effect successfully in HD 6?
    I select a clip (it is selected), click on the Editing tab, then click on the Video FX tab, and then select the fast/slow/reverse option. I am correctly using the slider to slow the clip down just one tick past the default position. The effect shows up in preview but will not apply. The red progress line (that indicates the effect is being rendered) shows up for about a tenth of a second and then stops. I am using the latest version of iMovie (6.0.3). I have a Dual 2 Ghz G5 Tower. I have 1.5 GB of ram. I am using OSX 10.4 8. All my software is up to date.
    The camera I am using is a Sony VX2000. Never had a problem with iMovie 4 and 5. I have two internal drives. I have an external drive that is for backups only. All three are Mac OSX Extended (Journaled) format. The drive i am capturing to is the original drive that came with with my computer. It is 160 GB. 147 GB is free. I keep this drive clean and only for current projects.
    I did have some plugins installed for iMovie from GeeThree. They are the updated versions for Intel and PowerPC running OSX 10.4.8. Again, all software is up to date. I did remove those plugins from the plugin folder. Also, I have ran Disk Utility and permissions are fine. I have not removed the preference files yet (plist) because I wasn't sure which ones to remove.
    A third thing I did was to create a new project (after unstalling the plugins, restarting, using Disk Utility), reimport some footage and see if the slow/fast/reverse effect would work then. It did not work. I then saved all my current work and saved to tape. I NEED THIS EFFECT TO WORK! Please who can solve my problem? Dinner is on me!! LOL!
      Mac OS X (10.4.8)  

    In addition to Karsten's great advice...
    Read Karl Petersen's post in this discussion for the common reasons the video FX don't work:
    http://discussions.apple.com/message.jspa?messageID=1852869#1852869
    :)Sue

  • Quantum TV - Skip Ahead does not work when program still recording or when time shifting

    I've always used skip ahead (set to 30 secs) to jump over commercials etc.  Since "upgrading" to Quantum, the skip ahead button does not always work.  I've narrowed the problem down to when the show you're watching is still airing (i.e. not  done recording).  The skip ahead function seems to work for a while until you reach a certain point in the program, then instead of skipping ahead, it jumps back to some earlier spot in the program.  When this problem occurs, this earlier spot is always the same spot.  To get around this bug you have to remember not to use the skip ahead button (easier said than done) or you're forced to fast forward back to the spot you  left off.  So once the problem starts you have to use the Fast Forward button to skip ahead.
    Is this a known issue?  Is a fix in the works?  Very frustrating indeed.
    Other gripes I have are  covered in other posts...such as the laggy remote controls.
    Thanks
    Solved!
    Go to Solution.

    People have reported that the skip issue is fixed in the latest level of the Verizon code sent out on 9/11, and Verizon has also said it is fixed. Are you sure you still have the problem? If so, I suggest you check to see if you have the latest software:
    Release: 1.0b
    Build Number: 02.18.2
    User Interface Version: 02.18.1
    Middleware Version: 02.18
    Firmware Version: KA12.37.03.04Alder.408758
    I have not experienced the skip problem on the new software level, but I have only done the skipping once on a program still recording so that is probably not a good test.
    I also do not really see any laggy response very often. Yes at times the box seems to just stop and take a deep breath or something for a couple of seconds, but overall the responses to commands from the remote have been getting better with each software upgrade (I have had 6 software upgrades I think since I got Quantum TV in early April). And I know Verizon has been working to improve the performance. Question: have you turned off the box and pulled the power plug for 15-20 seconds, then reconnected the power and let the box reinitialize? Some people have reported that doing that improves the remote performance (I have not had to do that).
    At this point I really do not have any issues with Quantum TV at all, but then again I have a pretty simple setup, no sound system for example, and I never use any Widgets or VOD, which some people complain about. I have my setup to watch TV, and record programs to watch later, the rest of the functionality is really of little or no interest to me.
    Justin
    FiOS TV: Extreme HD, Internet: 50/50, Digital Voice
    VMS Enhanced Service: 1 server, 2 clients
    Keller, TX 76248 (VHO 1)

  • One way ping happens however reverse does not work.

    I have two hosts ssux0049 and nus642.
    ssux0049 can ping nus642
    nus642 can not ping ssux0049
    Here are few details that you might be interested to look at.
    1.> DNS can resolve the hosts
    nus642 # nslookup ssux0049
    Server: 144.132.81.10
    Address: 144.132.81.10#53
    Non-authoritative answer:
    Name: ssux0049.example.com
    Address: 10.106.192.220
    ssux0049 $ nslookup nus642
    Server: 144.136.201.10
    Address: 144.136.201.10#53
    Name: nus642.in.example.com
    Address: 146.132.2.6
    2.>
    nus642 # ping -a ssux0049
    no answer from ssux0049(10.106.192.220)
    nus642 #
    ssux0049 $ ping -a nus642
    nus642 (146.132.2.6) is alive
    ssux0049 $
    3.>
    nus642 # ifconfig -a
    lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
    inet 127.0.0.1 netmask ff000000
    ixgbe0: flags=1001000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,FIXEDMTU> mtu 9000 index 2
    inet 10.86.211.5 netmask ffffffe0 broadcast 10.86.211.31
    groupname VLAN_2010
    ether 0:1b:21:57:1e:aa
    ixgbe1: flags=1001000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,FIXEDMTU> mtu 1500 index 3
    inet 146.132.2.6 netmask ffffff80 broadcast 146.132.2.127
    groupname VLAN_2004
    ether 0:1b:21:57:1e:b4
    ssux0049 $ ifconfig -a
    lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
    inet 127.0.0.1 netmask ff000000
    nxge2: flags=1009040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,FIXEDMTU> mtu 1500 index 2
    inet 172.84.166.44 netmask ffffff00 broadcast 172.84.166.255
    groupname ssux0049-172841660
    ether 0:21:28:84:b9:12
    ssux0049 $
    5.>
    nus642 # traceroute ssux0049
    traceroute: Warning: Multiple interfaces found; using 10.86.219.32 @ ixgbe2005000 --> Should it be using this gateway as per netstat output? If no, can I change
    traceroute to ssux0049 (10.106.192.220), 30 hops max, 40 byte packets this to some other available gateway?
    1 10.86.208.3 (10.86.208.3) 0.372 ms 0.262 ms 0.193 ms
    2 * * *
    3 * * *
    4 *
    I have checked gateways can be pinged. Let me know if you need more details to resolve this issue.
    Thanks,
    DR
    Edited by: 949530 on Jul 27, 2012 4:59 PM
    Edited by: 949530 on Jul 29, 2012 12:25 PM
    Edited by: 949530 on Jul 29, 2012 3:10 PM

    Hi.
    It's look like Firewall settings betwen this hosts.
    You can start traceroute  nus642 from ssux0049 and write all intermediate routers.
    After try ping all of hime from nus642. It can be help found point of problem.
    But again, firewall can have different rultes for different protocols and networks.
    Regards.

  • Reverse Printing Does not work in acrobat 9 pro

    Can anyone help with this? any suggestions?  I am trying to print a PDF portfolio. I need them to print in the reverse order they are currently printing in and checking the box Reverse pages does nothing??

    This does not work in Acrobat XI either for Office 64bit (Office 2013 64 bit)
    Does anybody know the fix for this?
    I called tech support today but they dont seem to know anything about the error although its a known issue with all previous versions of Acrobat for serveral years now.
    I really need to make this work, there is a random google post where I have ot make some regedits, but why can't Adobe fix this known issue since it is nothing new?
    My basic understanding at this point is that even Acrobat XI is a 32 bit app and the programmers at Adobe still dont know how to write the API to talk to a 64bit mail client?
    I really need some help on this if anybody has a real solution.
    Thanks!

  • Jump and Skip does not work

    I have written a program that executes certain instructions.It reads these instruction from an array of Textfield.I have a for loop to go through the Textfield.I am unable to implement a JUMP instruction that will jump to a specified Textfield as well as the SKIP instruction that will skip the next Textfield based on some condition.
    I tried the code below but it does not work
    private class Executionionhandler implements ActionListener
    { public void actionPerformed(ActionEvent event)
    { int StartLocation=(int)(Integer.parseInt(start2.getText()));
    //start1.setVisible(false);
    //start2.setVisible(false);
    //r, StartLocation, End, Stop are global
    for(int r=StartLocation;r<End && Stop==false;r++)
    {/content[r] is a Textfield
    String read=Content[r].getText();
    String com1=read.substring(0,2);
    int com11=(int)(Integer.parseInt(com1));
    String com2=read.substring(2,4);
    instruction(com11,com2);
    public void instruction(int IN1,String IN2)
    { switch(IN1)
    { case 1:
    //do something
    break;
    case 3:
    //do something break;
    case 7://the JUMP INSTRUCTION
    int JmpLoc7=(int)(Integer.parseInt(IN2));
    r=JmpLoc7;
    //StartLocation=JmpLoc7;
    break;
    case 8://the SKIP INSTRUCTION
    int copy81=(int)(Integer.parseInt(BUTTON.getText()));
    if(((copy81<0) && (IN2.equals("00"))) ||
    ((copy81==0) && (IN2.equals("01"))) ||
    ((copy81>0) && IN2.equals("02")))
    r++;
    case 11:
    error1.setText("End of command");
    Stop=true;
    break;
    default:
    error1.setText("BAD COMMAND");
    Stop=true;
    Any idea why or how can I achieve this?

    Hi,
    Not exactly sure what you code is trying to do and you didn't explain it either ...
    Some thoughts that might help:
    The variable r is only valid inside the for loop. Therefore setting it in another method will result in nothing happening. You will need to make r a class variable (like your comment says) to have access to a single variable in more than one method. Then you need to stop declaring it inside your for loop otherwise you will just create a local variable and all will be lost again.
    Something like:
    private class Executionionhandler implements ActionListener
      public void actionPerformed(ActionEvent event)
        for( r = StartLocation; r < End; ++r )
          instruction();
    }Regards,
    Manfred.

  • IPod nano version 6:  random turn off, volume controls don't work, does not turn off, skip does not work.  Two years old!  Next version of nano has no clip and same amount of storage.  I do not want to give up my version 6!

    iPod nano version 6:  random turn off, volume controls don't work, does not turn off, skip does not work.  Two years old!  Next version of nano has no clip and same amount of storage.  I do not want to give up my version 6!

    Make a Genius Bar appointment at your nearest Apple Store and pay $75 USD for an out-of-warranty replacement.

  • Scrolling in Preview does not work after update?

    Hi everyone,
    I have recently updated my MacBook Pro (bought in 2011) to Maverix OS X 10.9.1 and ever since had problems with the Preview app.
    Whenever I open a PDF no matter what size with Preview I cannot use the trackpad to scroll down.
    It's not a fault in the trackpad since I can move the mouse and scroll in the sidebar and any other apps, simply not when I move the mouse over the PDF and want to scroll down.
    <edit> This is all the time! I have read dicussions where people had a problem with the trackpad not scrolling for 1-2seconds and then it's working again. Mine just does not work period. It never has unfortunately. <edit>
    I have enabled 'Continuous Scroll' in preferences and tried several other solutions I could find in this community (e.g. System Preferences -> Trackpad -> Change setting to 'with inertia'; that option was not available in my preferences) and I just don't seem to be able to solve this problem.
    I have also tried to set the preferences for 'Show Scrollbar' to 'always' (which had been suggested by one user). The scrollbar dows show up and I can click and drag the bar und thus the pages but it did not change my problem with the two-finger-touch-scroll on the trackpad.
    It's really bugging me since the only way I can scroll down is using the down-arrow constantly which is incredibly annoying.
    Anyone got any ideas? The same problem? A solution even?
    Thanks for your help!!!
    Cheers
    haiviva

    There's a few possibilities then.
    1) Startup to your Leopard installation disk. Don't reinstall the OS, just choose Disk Utility from the menu bar when you can. Once Disk Utility is running, choose your hard drive and click on Repair Disk. If any errors are indicated, keep running Repair Disk until it says everything is okay. If you can't repair the errors (if any) after a few tries, you'll need something much better suited to the task. Most people rely on Disk Warrior.
    2) If the drive has no errors, remain booted to the Leopard installation disk. Without leaving Disk Utility, on the same hard drive, run Repair Permissions.
    You can do both of these steps from an external hard drive if you have Leopard installed on it. Boot to the external drive and run the same two first steps. DO NOT use Tiger or Panther. Running Repair Permissions from the wrong level of OS X will cause a lot of headaches.
    3) If you still can't change file associations, then try dumping the Launch Services Database. This is the file which controls what file types are tied to which applications. OnyX is one such utility that can delete the database for you. Be careful with this utility. It can do a lot of different things, so only do what you need to at this point. Also make sure to download the version for Leopard. Once you have Onyx, launch the app and type in your admin password. Click on the Maintenance heading. Turn on the check box at the top for "LaunchServices". Make sure all other check boxes are off and click the "Execute" button. Onyx should tell you to restart. Do not skip restarting".
    Now try changing any file associations. If it still doesn't work, the OS may be damaged. It's not uncommon for a damaged system to appear okay until after you install a large package like CS4. If that's the case, then perform an Archive and Install from the Leopard installation disks. Make sure to choose the option to preserve your settings.

  • Minetest translation does not work on my machine.

    Hey there.
    After trying my luck in the official Minetest forums a week ago and got nothing more than the initial “try this-and-that” thing as response in the German discussion section and no reply at all in the regular discussion section I decided to ask on Reddit on last Saturday afternoon, too. On Reddit my question only got 3 upvotes and no comments.
    Since no-one seems to know what’s going on I decided to post my question here, too.
    It sems like the translation feature in Minetest does not work on my machine for unknown reason.
    The language files are there and according to it’s oputput and the PKGBUILD Minetest was compiled with gettext support. LANG and LC_MESSAGES are properly set (I even tried LC_ALL). Localization works properly in all other applications that support localization.
    Here’s some relevant system information.
    $ uname -rms
    Linux 3.16.1-1-ARCH x86_64
    $ minetest --version
    Minetest 0.4.10
    Using Irrlicht 1.8.1
    Build info: VER=0.4.10 BUILD_TYPE=Release RUN_IN_PLACE=0 USE_GETTEXT=1 USE_SOUND=1 USE_CURL=1 USE_FREETYPE=1 USE_LUAJIT=0 STATIC_SHAREDIR=/usr/share/minetest
    $ pacman -Ql minetest | grep locale/de
    minetest /usr/share/locale/de/
    minetest /usr/share/locale/de/LC_MESSAGES/
    minetest /usr/share/locale/de/LC_MESSAGES/minetest.mo
    $ locale
    LANG=de_DE.utf8
    LC_CTYPE="de_DE.utf8"
    LC_NUMERIC="de_DE.utf8"
    LC_TIME="de_DE.utf8"
    LC_COLLATE="de_DE.utf8"
    LC_MONETARY="de_DE.utf8"
    LC_MESSAGES="de_DE.utf8"
    LC_PAPER="de_DE.utf8"
    LC_NAME="de_DE.utf8"
    LC_ADDRESS="de_DE.utf8"
    LC_TELEPHONE="de_DE.utf8"
    LC_MEASUREMENT="de_DE.utf8"
    LC_IDENTIFICATION="de_DE.utf8"
    LC_ALL=de_DE.utf8
    $ cat /etc/locale.gen
    de_DE.UTF-8 UTF-8
    en_DK.UTF-8 UTF-8
    en_US.UTF-8 UTF-8
    According to the discussion in the German discussion section in the Minetest forums I tried to set language = DE (and variants like de_DE with or without .utf8 in all possible variants) in minetest.conf but it didn’t change anything. Also: Here’s the output of running Minetest with --verbose parameter.
    16:47:01: INFO[main]: Using system-wide paths (NOT RUN_IN_PLACE)
    16:47:01: INFO[main]: path_share = /usr/share/minetest
    16:47:01: INFO[main]: path_user = /home/dirk/.minetest
    16:47:01: INFO[main]: minetest with SER_FMT_VER_HIGHEST_READ=26, VER=0.4.10 BUILD_TYPE=Release RUN_IN_PLACE=0 USE_GETTEXT=1 USE_SOUND=1 USE_CURL=1 USE_FREETYPE=1 USE_LUAJIT=0 STATIC_SHAREDIR=/usr/share/minetest
    16:47:01: INFO[main]: logfile = /home/dirk/.minetest/debug.txt
    16:47:01: VERBOSE[main]: httpfetch_init: parallel_limit=8
    16:47:01: INFO[main]: Message locale is now set to: LC_CTYPE=de_DE.utf8;LC_NUMERIC=C;LC_TIME=en_DK.utf8;LC_COLLATE=de_DE.utf8;LC_MONETARY=de_DE.utf8;LC_MESSAGES=de_DE.utf8;LC_PAPER=de_DE.utf8;LC_NAME=de_DE.utf8;LC_ADDRESS=de_DE.utf8;LC_TELEPHONE=de_DE.utf8;LC_MEASUREMENT=de_DE.utf8;LC_IDENTIFICATION=de_DE.utf8
    Irrlicht log: Irrlicht Engine version 1.8.1
    Irrlicht log: Linux 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64
    Irrlicht log: Using renderer: OpenGL 3.3.0
    Irrlicht log: GeForce 9600 GT/PCIe/SSE2: NVIDIA Corporation
    Irrlicht log: OpenGL driver version is 1.2 or better.
    Irrlicht log: GLSL version: 3.3
    16:47:01: INFO[main]: text_height=22
    16:47:01: INFO[main]: Searching worlds...
    16:47:01: INFO[main]: In /home/dirk/.minetest/worlds:
    16:47:01: INFO[main]: Spielwelt
    16:47:01: INFO[main]: 1 found.
    16:47:01: INFO[main]: Waiting for other menus
    16:47:01: INFO[main]: Waited for other menus
    16:47:01: INFO[main]: Audio: Initializing...
    16:47:01: INFO[main]: Audio: Vorbis extension NOT present
    16:47:01: INFO[main]: Audio: Initialized: OpenAL 1.1 ALSOFT 1.16.0, using OpenAL Soft
    16:47:01: INFO[main]: GUIEngine: Initializing Lua
    16:47:01: VERBOSE[AsyncWorkerThread_0]: Loading and running script from /usr/share/minetest/builtin/init.lua
    16:47:01: INFO[AsyncWorkerThread_0]: Initializing Asynchronous environment
    16:47:01: VERBOSE[AsyncWorkerThread_1]: Loading and running script from /usr/share/minetest/builtin/init.lua
    16:47:01: INFO[AsyncWorkerThread_1]: Initializing Asynchronous environment
    16:47:01: VERBOSE[AsyncWorkerThread_2]: Loading and running script from /usr/share/minetest/builtin/init.lua
    16:47:01: INFO[main]: SCRIPTAPI: Initialized main menu modules
    16:47:01: VERBOSE[main]: Loading and running script from /usr/share/minetest/builtin/init.lua
    16:47:01: INFO[AsyncWorkerThread_2]: Initializing Asynchronous environment
    16:47:01: VERBOSE[AsyncWorkerThread_3]: Loading and running script from /usr/share/minetest/builtin/init.lua
    16:47:01: INFO[AsyncWorkerThread_3]: Initializing Asynchronous environment
    16:47:01: INFO[main]: Searching worlds...
    16:47:01: INFO[main]: In /home/dirk/.minetest/worlds:
    16:47:01: INFO[main]: Spielwelt
    16:47:01: INFO[main]: 1 found.
    16:47:01: VERBOSE[main]: OpenALSoundManager::maintain(): 0 playing sounds, 0 sound names loaded
    16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.0.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.1.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.2.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.3.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.4.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.5.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.6.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.7.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.8.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.9.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.0.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.1.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.2.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.3.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.4.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.5.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.6.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.7.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.8.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.9.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.ogg for decoding
    16:47:01: INFO[main]: OpenALSoundManager: "main_menu" not found.
    16:47:05: INFO[main]: Audio: Deinitializing...
    16:47:05: INFO[main]: Audio: Deinitialized.
    16:47:05: INFO[main]: GUIEngine: Deinitializing scripting
    16:47:05: INFO[main]: Searching worlds...
    16:47:05: INFO[main]: In /home/dirk/.minetest/worlds:
    16:47:05: INFO[main]: Spielwelt
    16:47:05: INFO[main]: 1 found.
    16:47:05: INFO[main]: Updating configuration file: "/home/dirk/.minetest/minetest.conf"
    16:47:05: INFO[main]: Skipping writing of /home/dirk/.minetest/minetest.conf because content wouldn't be modified
    16:47:05: INFO[main]: Updating configuration file: "/home/dirk/.minetest/minetest.conf"
    16:47:05: INFO[main]: Skipping writing of /home/dirk/.minetest/minetest.conf because content wouldn't be modified
    16:47:05: VERBOSE[main]: httpfetch_cleanup: cleaning up
    … or on nopaste.info for better readability.
    Since it seems to work for everyone else (otherwise there might be more replies to my quesions in several places, I guess *g*) I’m pretty sure that’s a local problem on my machine. But since gettext properly works on my machine in all and every application that use it I have no clue at all where to start debugging.
    Hints are highly appreciated Thanks in advance!
    Kind regards,
    Dirk

    Hi there...
    It gives me a URL that begins with http:// Safari does something strange, ie. flashes the page, and then complains about not recognizing photo://
    It seems that it has not figured out that it needs to open iPhoto 6.
    Regardless, the provided link is not viewable when cutting and pasting into safari, neither.
    I am using the latest and greatest 10.4.4, Safari is 2.0.3.

  • Kenwood X991 & iP200 cable with iPod 5th Gen 80GB does NOT work correctly

    I have a conundrum. My wife has the 4th Gen v1.2.1 iPod 30GB which works fine on my Kenwood X991 Head Unit. I recently purchased the "new" 80GB iPod 5th Gen with the latest version "1.0.2" which does NOT work properly. The iTunes software tells me that this 1.0.2 is the latest software.
    When I attach my iPod to my stereo, it states "Reading" for eternity. It DOES play music but only plays Alphabetical Order ONLY. There is no ability to stop, change, fast-forward, reverse, etc....the only thing you can do is click "Source" to change to CD Player or Tuner, etc...
    Does anybody out there know what is going on? I have a request into Kenwood as well. Thanks in advance for all your help!
    -Kingofbytes

    Thanks for the help. It's an iPod Classic then 80GB. The unit plays when plugged in but does not allow searching, or switching songs nor displays as it is supposed to. My wife's 30GB works with no problems. Of note:
    Her 30GB = v1.2.1
    My 80GB = 1.0.2
    Mine is newer by about 6 months. Both are the latest software according to the screen.
    Kenwood has said to "reset the head unit" and "make sure I've got it plugged in properly". I need to try the reset part next but the last statement is funny to me. I can install a head unit, amplifier, re-run all speaker wire, install a Dual 10" subwoofer box, solder and wire tie all connections from a factory unit to a 3rd party Cable manager kit, but I need to "make sure" I know how to plug in an iPod cable.....laughable.

  • When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    Hi Brian,
    Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
    Thanks for your help though!
    Pernille

  • Address book to google sync  does not work

    I use Google apps as my primary calendar and address book. I have them synced to the Mac OS X ical and address book (to use off line). I have the Mac OS X ical and address book synced to mobile me to update other computers and my iphone.
    The net result is everything matches the Google apps calendar and address book.
    Well, not so fast.
    The calendar does work as expected.
    In the Mac OS X address book, the Google sync option does not sync (you can enter in your user name and password fine, it appears to make connection fine, but it does not sync). The mobile me does sync as expected.
    It is simple, there is not a lot you can do wrong, it just does not work.
    As a work around, I am using Googles over the air sync to iPhone which does work, but that means the mac address book is getting skipped.
    When does the checked Synchronize with Google happen in address book? When you open address book? Why does the option only appear if you have an iPhone? How do I get the address book to google sync to work?
    Any ideas?
    thanks
    bob

    Mine actually performs the sync, but after a few rounds of syncing, some contacts get deleted, some get their photos removed, some get duplicated, and some get removed from groups. The sync basically puts my address book through a blender. I'm syncing both with MobileMe and Google. Well, that is I tried to. I've decided not to sync with Google since that's what seems to initiate the mess.

  • Adobe After Effects CS3 does not work on my new iMac

    Hello everyone,
    I recently bought myself a new iMac and Adobe After Effects CS3, and guess what, the stuff does not work. I've tried almost everything, been on a lot of forums but can't seem to find any solution. One thing that keeps coming back is that it has to do with the Geforce 8800 GT in my iMac, some kind of compatibility problem between both.
    The problem is this, whenever I start AE CS3, a window pops up, stating "Out of Memory ( 23 :: 40 )".
    And then something about licensing, but I guess I can skip that window, since that clearly has nothing to do with the problem.
    Are there some beta drivers or something for my videocard that I can download somewhere to maybe get rid of this problem?
    Thanks in advance,
    Maxim

    Maybe an answer at http://www.adobeforums.com/webx/.59b665be/1

  • The Software that came with my book does not work. CISCO CCENT / CCNA ICND1 by wendell odom

    Hello this is my first post on cisco support and hope I can get some help. I recently purchased the book CISCO CCENT / CCNA ICND1 by wendell odom and when I used the CD to install the Pearson Practice exams, it does not work. I tried everything! It even asks for a activation code, which on the CD It says "Refer to the Activation Code Included in the DVD Sleeve when Registering Pearson IT Certification Practice Test Software"I don't see anything related to a Activation Code anywhere on the CD OR on the sleeve! So now I can't use that.
               The Network simulator Wendell odom uses in his videos is already outdated it seems and I can't get mine to work. Why? Because I bought this book in hopes of this being a beginner book and praying the person won't skip information to actually set up the book. So now the videos are useless because I can't connect because I have no idea how...
              The Network Simulator lite, wow 3/3 When giving me software to use. The Prompt command does not work, Only the enter key will work but when I try to put in a password I can't hit anything else but enter.
                 I hope I can get help from a more official member as to seeing how I bought this book and I can read but whats really the point if I don't have the hands on training?

    Keunepete,
    When I ordered my books for the ICND1 and ICND2, they came with a CD in the back pocket (sleeve) of the book. Along with the CD was a thick piece of paper that had the activation code on it. It was a white, square piece of paper with big black print on it. Did you buy your book used? Was the CD sealed in the back pocket?
    -Zach

  • New settlement parameters  in   sales order  does not  work

    Hi
    I have a    sales order for  service material.    It is invoiced.    I  have to settle it.    The  existing  settlement rule  is  wrong. So  I have created a new allocation structure and   changed   settlement  parameter  in     the  sales order.   I save the  sales order.
    But in VA88 the settlement does not work. I get error message ' receiver cost element not defined and thet cat. PSG not defined.'
    But the same allocation structure work good for new sales order.
    Pl advise how  I  can  do the settlement for  old   sales orders,  subsequently changed for  settlement parameter ie allocation structure. 
    Thanks
    kamala

    Hello Kamala
    Not an expert on this subject, but here is what I suggest, Try and see if it works.
    1) Firstly retract the changes you did in sales order and settle first with the wrong settlement parameter (Old data).
    2) Now change the existing allocation structure, don't create NEW ONE. If you change an allocation structure, the changes only affect future settlements.
    3) Then reverse the settlement.
    4) Now re-do the settlement.
    Let me know how it goes. Take care.

Maybe you are looking for