Chapters and Play all - how do I get this to work with a one hour project?

Hi
I have a one hour project and at the moment I have it in one track with a Main Menu, Chapter menu and a bridge menu for the loop point.
I have 5 chapters and want 2 functions to happen in my DVD structure:-
1. the Play All function
2. and the Chapters to play each individual chapter and then go back to the Chapter menu when it;s finished.
As my project is now, the play all feature won't work, it is like it's the CHapter menu.
In the past I've had a track for the play all and then separate tracks for each chapter. Is there a way around this - do I have to do that fancy encoding (which I have no idea how to set up.
I have 5 chapters and would love some help to construct this as I don't think the 2 hours would fit on my single layer DVD and it would be a lot more exporting work.
Hope you can help.
Cheers
Margie

You may want to use scenarios in this situation.
click the "add a scenario" button, an add as many scenarios as you have chapters.
Then double click on each scenario option.
You will see a list of chapter appear on the left of your timeline area.
Drag the chapter you want to play solo to the empty list on the right ("scenario markers").
Make sure you then select that chapter marker in the scenario Marker list, and choose "end jump: main menu". Also make sure that your gobal scenario end jump is set to your main menu too.
Then link you buton to that scenario and repeat for the other chapters.
hope that helps.
tee.

Similar Messages

  • Email messages from my icloud account update on all my devices showing if they have been read and if a reply has been sent.  This does not happen with my tinyworld (TalkTalk) email account.  Can I (how can I) get this to work with TinyWorld?

    Email messages from my icloud account update on all my devices showing if they have been read and if a reply has been sent.  This does not happen with my tinyworld (TalkTalk) email account.  Can I (how can I) get this to work with TinyWorld?

    You have to look at the email protocol being used.  the Apple email system uses IMAP, does Tinyworld use IMAP or POP?
    Does the email system permit delivery receipts to be requested?
    Just some of the things one needs to determine from the information provided by the email service provider.

  • My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • I got a movie (the mist) from the itoons store. My ipad says I can not be played. How do I get this to work on my IPad?

    I got a movie (the mist) from the itoons store. My ipad says I can not play it. How do I get this to work????

    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • How can I get this to work with NAT?

    Hi Masters, 
    I need to add a route-map to a static NAT but the option seems to be available only if using inside/outside NAT, not if using enable NAT. 
    This is a CISCO1921/K9 running 15.2(4)M6
    Here's what I mean: 
    R2(config)#ip nat inside source static 192.168.3.20 10.10.10.20  ?    -->  allows the route-map option to be appended 
      extendable  Extend this translation when used
      mapping-id  Associate a mapping id to this mapping
      no-alias    Do not create an alias for the global address
      no-payload  No translation of embedded address/port in the payload
      redundancy  NAT redundancy operation
      route-map   Specify route-map
      vrf         Specify vrf
      <cr>
    R2(config)#ip nat source static 192.168.3.20 10.10.10.20 ?         -->  no route-map option 
      extendable  Extend this translation when used
      no-alias    Do not create an alias for the global address
      no-payload  No translation of embedded address/port in the payload
      vrf         Specify vrf
      <cr>
    What I need is multiple dynamic and static NAT rules between multiple interfaces, so I need a way to assign multiple static NAT depending on the destination. 
    For example, if server 192.168.3.0 wants to go to VLAN A, get statically translated to IP 1. 
    If the same server 192.168.3.0 wants to go to VLAN B, get statically translated to IP 2. 
    AS far as I know I need a route-map attached to the static NAT statements to make this happen, but the option is not available as shown above. And I don't want to use normal inside/outside NAT since I need the interfaces to allow NAT in both directions. 
    If anybody can share some light will be very appreciated!

    Paul, 
    The commands: 
    ip nat source list or ip nat source route-map works fine for dynamic NAT or PAT, but I need static NAT. 
    And the Static PAT statements won’t work since we need all ports defined. 
    So, I guess I need a way to map static NAT depending on the destination using domain-less NAT. 
    Can this be accomplished?

  • Mifi - how do I get this to work with my Mac?

    I tried last night, and had zero luck - am I missing something?
    Has anybody been successful, or should I just go back to my old access method?
    Thanks . . .

    bethedwards wrote:
    I tried last night, and had zero luck - am I missing something?
    Has anybody been successful, or should I just go back to my old access method?
    Thanks . . .
    What was it that you tried?
    I have connected to Windows XP and 7, iPod Touch, iPad, and Blackberry.
    Works better than the free WiFi at Starbucks for me.
    Clarence

  • How can I get Preloader to work with my (Edge Animate) project?

    I have carefully followed the instructions to set up a simple preloader gif for my fairly large project. After hours of torturous examination, I still cannot find out why the preloader gif does not appear. Can anyone help?  The project is at:
    Coda -The Novel by AJ Levy
    To anyone that can see the problem, thanks in advance.

    Oooops -- it was working just fine. The gif just happened to be below the visible part of the page on the screen. Sorry.

  • Does apple make a printer for iPad if not how dow I get it to work with a HP Officejet 6500A Plus printer?

    Does Apple make a printer for the iPad and if not how do I get it to work with a HP Officejet 6500A Plus printer? Thanks

    Apple don't make any printers, but there are a number of the printers that are AirPrint-enabled, which you should be able to print to just by the printer and the iPad being on the same wifi network - the models that support AirPrint are listed on this page (the page also includes a bit of troubleshooting at the bottom of it) and it includes :
    HP Officejet 6500A e-All-In-One E710a
    HP Officejet 6500A Plus e-All-In-One E710n
    If your's isn't one of those then you could see if HPs own ePrint app works with it, or there are third-party printer apps such as PrintCentral Pro and Print n Share which might work it

  • I have 2 games Words with Friends and Cityville that receives a Pop-up message form iTunes...  "Connect to iTunes to use Push Notifications" and will not allow me to exit out of the app or play.  How can I get this message to STOP?

    I have 2 games Words with Friends and Cityville that receives a Pop-up message form iTunes...  "Connect to iTunes to use Push Notifications" and will not allow me to exit out of the app or play.  How can I get this message to STOP?

    Yes - I connected my phone to my computer / Itunes and went into the apps section, but from there I have no idea how to manage the push notifications.  I even tryied going into itunes that is installed on my phone.  I still cannot find anyplace to manage these popups.  I have also gone into settings - notifiations - and tried turning all notifications for these apps all off but that didnt work either.  Any guidance is MUCH appreciated - Im not sure where to go from here.

  • I purchased a song on iTunes and it is displayed in my list of SONGS.  However, when I try to add to my iPhone 4, it displays with a small circle of dots to the left of the song title and will not play.  How do I get this song onto my device?

    I purchased a song on iTunes and it is displayed in my list of SONGS.  However, when I try to add to my iPhone 4, it displays with a small circle of dots to the left of the song title and will not play.  How do I get this song onto my device?

    Hi TKCDM1!
    You should try to get this purchase onto your iOS device by using the suggestions in the following article:
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/ht2519
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • I am using Numbers on my iPhone5 and cannot get the app to do a simple (SUM) calculation.  It shows the formula correctly in the cell, but all I get for my long list of numbers to add is 0.  How can I get this to work?

    I am using Numbers on my iPhone5 and cannot get the app to do a simple (SUM) calculation.  It shows the formula correctly in the cell, but all I get for my long list of numbers to add is 0.  How can I get this to work?

    Oaky, at least we got that far.  Next step is to determine if all those "numbers" are really numbers.  Changing the format to "number" doesn't necessarily change the string to a number. The string has to be in the form of a number.  Some may appear to you and me as numbers but will not turn into "numbers" when you change the formatting from Text to Number. Unless you've manually formatted the cells to be right justified, one way to tell if it is text or a number is the justification. Text will be justified to the left, numbers will be justified to the right.
    Here are some that will remain as strings:
    +123
    123 with a space after it.
    .123

  • Itunes was deleted from laptop after changing credit card info and password.  How do I get it back along with all songs that was on my account

    itunes was deleted from laptop after changing credt card infor and password.  How do I get it back along with all of its contents?

    I suspect unless he had some items in iCloud backup then they are gone.  Connecting an iPhone to a different library from that to which it was previously connected will result in the device asking if you want to erase it.

  • HT201365 I recently updated my Ipad 2 with iOS7 and I suddenly have 794 emails in my inbox which were previously read and deleted.  how do I get rid of them without doing one at a time?

    I recently updated my Ipad2 to iOS7 and suddenly have 794 emails in my inbox which were previously reviewed and deleted.  How can I get rid of them without doing one at a time?

    You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup.  If you haven't been doing this, start now and then restore your old backup.  You will then be able to sync the new contacts back into the phone.  However, you will lose all messages, etc newer thant the backup.

  • My old appleID use email with domain already deactivate. So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?

    My old email that using register for apple ID cannot access/check any mail because that domain already deactivate.
    So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?

    Hi ccharat,
    Welcome to the Apple Support Communities! It sounds like you did a good job editing your Apple ID and primary email address, but you didn’t sign out of iCloud on your iOS device before hand. What you may need to do in this situation is go back to the Apple ID website and edit your Apple ID and primary email address back to the email address that is signed in with iCloud (there is no need to verify the account after editing it back to the old account, just changing it back is enough). Once your Apple ID is back to the original account, delete the iCloud account from the iOS device and be sure to keep all info on the device when prompted. After you delete the iCloud account, go back to the website and edit your Apple ID and primary email address back to the new address. Once it is back to the account you would like, you can sign into the iCloud on the iOS device with that new account and merge all of the data when prompted. Please use the following article as a reference.
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/ts5223
    Change your Apple ID temporarily
    If signing out and back in to iMessage or FaceTime didn't help, try these steps:
    Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
    Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
    Scroll down and tap Delete Account, then tap Delete to confirm.
    Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
    Enter the password for your previous Apple ID.
    Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
    Return to Settings > iCloud and sign in with your new Apple ID.
    I hope this helps,  
    -Joe

  • How do I get iCloud to work with my mac that has snow lepard and is pre intel?

    How do I get iCloud to work with my mac that has snow lepard and is pre intel?

    Richard Kerns wrote:
    And it kills me that a friend who has pc computers and just has an iphone and ipad can breeze through all this with no problem and he still has XP.  So Apple goes back and helps old OS for pc but not for it's own kind!!!
    Richard, I agree with you 1,000%. I wrote this in a forum a few weeks ago, when a user was complaining about Snow Leopard not supporting iCloud:
    Why is it that if I bought a Mac before July of this year, I must pay to upgrade my operating system in order to take advantage of iCloud? Meanwhile, a Windows Vista SP2 user, who bought a new computer in May 2009, already has everything they need on their computer to use iCloud.
    Why was it possible for Apple to write a free iCloud Control Panel that was compatible with existing versions of Windows, but Mac users must buy an entirely new operating system?
    If Apple gave Mac users the same amount of backwards compatibility that it gives to Windows users, people with OSX 10.5 (Leopard) would be able to use iCloud. That's something to think about the next time you go to purchase a new computer.
    (P.S. Something else to think about: If you bought a Mac before October 2007 (when OSX 10.5 was introduced), your computer won't run iTunes 10.5 unless you buy an upgrade. But a PC user, who purchased their computer as long ago as Sept. 2004(!), can run iTunes without an OS upgrade.)
    I got so angry thinking about this, that I ended up writing an angry note to Apple on their feedback page. After repeating what I just wrote here, I asked them to commit to providing at least the same level of support to Mac users that they do for PC users when it comes to their cross platform products (iPhone, iPad, iCloud, Apple TV, Safari, iTunes, etc.) And, really, is that so much to ask?
    I wish I knew how to start a petition requesting that Mac users get comparable treatment as PC users. But then again, shouldn't that go without saying?
    Please leave feedback about this revolting double standard on the Apple feedback page. They should be thinking long and hard about why their own customers are treated worse than the customers of their competition.

Maybe you are looking for