Chapters lost when converting movies for ipod

I have some video with chapters that when I convert them to ipod version the chapters are gone. Any reason for this?

I can't think of a reason this would happen, but I here is how to put the chapter marks back in (granted it takes a little work).

Similar Messages

  • Converting Movie for iPod

    So, I have an .MPG file that i want to work on an ipod... but when i do the whole Advanced > Convert Selection for iPod thing which turns it in to an .MP4 file... the sound of the movie goes away.
    Is there a way to fix it so it doesnt... or is there another MPG > MP4 editor out there?

    If you need help first you'll need to explain a few more things. What version of QuickTime do you have installed? QuickTime 7.0.3 (which adds export to iPod feature) or QuickTime 7.0.4?
    I've heard some people had problems with upgrading to QuickTime 7.0.4 - namely they lose their Pro functionality. Also what version of Mac OS X are you running is it Panther (10.3.9) or 10.4 Tiger? How old is your Mac? Is it one of the Intel based Macs released at MacWorld '06 or an older PowerPC based one?
    Also what version of iTunes are you running? (This is important) iTunes 6 and higher requires QT 7.0.3 for best video playback. Videos I convert to iPod format using QT's export movie to iPod feature end up in .m4v format (the format of videos sold in iTunes) but mine are unencrypted - no FairPlay DRM.
    I am converting my own videos to the iPod's format. .mp4 is another format the iPod can use. If you have ffmpegX (Google it) can convert video to iPod video or iPod TV format.
    My videos exported to iPod format in QT 7.0.3 were originally in .AVI format.
    Export to iPod (320X240) format = .m4v (MPEG 4 Video)
    They work just fine and I have a Mac PowerBook G4 from winter 2003 with OS X Panther (10.3.9) + QuickTime 7.0.3 + iTunes 6.0.2

  • No sound when converting movies to ipod in itunes

    Ever since i received my ipod i was having problems converting my movies to ipod format. It takes a few hours to convert and then when its done i get no sound (movies are currently on my computer just not ipod ready.) I've made sure i have the latest version of itunes. Other than that i couldnt find any trouble shooting tips. I also tried converting using Quicktime pro. That was just a complete waste of time. It says it converts in about 4 seconds, when i go to open the file its just a snapshot of my computer screen instead my movie. (i go into export, pick the file, then select movie to ipod. also tried movie to mp4) Any ideas on what to do?!?!

    QuickTime expects video files with separate video and audio tracks, but many MPEG formats used a muxed (multiplexed) single track that contains both. Therefore, iTunes & the iPod (both of which use QuickTime) only show the video and no sound.
    iPod plays video but not audio of some exported files
    http://docs.info.apple.com/article.html?artnum=302588
    One way to work around this is to use MPEG Streamclip to convert the files to fix this issue...
    http://www.squared5.com/
    GUIDES TO: Converting Video for iPod - Mac & Window
    http://forums.ilounge.com/showthread.php?s=&threadid=123067
    Patrick

  • Converting Movies for iPod: No Sound

    Whenever I convert a movie for my iPod, there is no sound in the converted file. The original movie has sound, but it is in a form that you can't put on iPod.
    By the way, I am using the Convert Selection for iPod/iPhone under the Advanced menu.
    Any ideas??
    Brad

    Try using MPEG Streamclip to convert the videos; more information on this issue is available in this article.
    (25780)

  • Convert Movie for iPod-sound disappeared

    I tried to convert a video for iPod by using "Advanced/Convert Selection to iPod". After it's converted, the sound is gone. Any idea why? Also, the video quality is bad when I view it in iPod, anyway I can adjust it? Thanks!!

    If the videos are multiplexed MPEG files then the audio and the video are muxed onto the same track. QuickTime, and therefore any application that uses QT like iTunes, the iPod, iMovie (Mac app), etc. expect two separate tracks, one video and one audio. So when you play these muxed files, the video is played and the audio is not heard.
    iPod plays video but not audio of some exported files
    http://docs.info.apple.com/article.html?artnum=302588
    So you need to do a conversion on the file first. MPEG Streamclip is a popular one that comes in both Mac and Windows versions and is known to "repair" this problem.
    See this other link for other applications that might be able to do the same thing. But your root cause is the muxed MPEG files.
    GUIDES TO: Converting Video for iPod - Mac & Window
    http://forums.ilounge.com/showthread.php?s=&threadid=123067
    Patrick

  • Converted movie for ipod but no sound!!!

    I’ve finally converted all my music videos to apples “.mov” format since they work great in itunes. However for some reason several videos will not transfer to the ipod as itunes says they will not play. The videos that seem to be working were converted to m4p before converted to .mov. I had no idea an apple file (.mov) wouldn’t work on an apple device (ipod), whatever. So I used the “Convert Selection for iPod” for a movie that wouldn’t work. After a freaking long time, 15-20min for a 4min video, it converted it but of course, there’s NO SOUND. Try and figure that one out. BTW, has anyone ever had their question answered on these forums?

    Classichris,
    The article http://docs.info.apple.com/article.html?artnum=302758 may be helpful.
    Specifically the link to http://docs.info.apple.com/article.html?artnum=302588
    Hope this helps,
    Generik
    PowerMac G4/Dell Precision WS 370, XP Pro   Mac OS X (10.4.7)  

  • No audio when converting video for ipod 3rd generation

    I read a thread that had not be answered regarding video to ipod that ends up with no sound. I wonder if anyone has found the answer to the problem. I have converted movies from imovie 08 and had no problems with sound but when I tried to convert a downloaded music video I only get the video and no sound.
    Anyone have the answer to that one?
    Thanks
    Kevin

    QuickTime expects video files with separate video and audio tracks, but many MPEG formats used a muxed (multiplexed) single track that contains both. Therefore, when you convert videos in iTunes to iPod format they only show the video and no sound since iTunes (really QuickTime) is not looking for the audio track within the video track and it gets lost.
    iPod plays video but not audio of some exported files
    http://docs.info.apple.com/article.html?artnum=302588
    One way to work around this is to use MPEG Streamclip to convert the files to fix this issue...
    http://www.squared5.com/
    but there are other applications besides MPEG Streamclip you can try as well.
    Frequently asked questions about viewing and syncing video with iTunes and iPod
    http://docs.info.apple.com/article.html?artnum=302758
    The Complete Guide to Converting Video to iPod Format (Mac)
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-convert ing-video-to-ipod-format-mac/
    Patrick

  • No Audio When Converting Videos For iPod

    whenever i convert video files for my ipod they do not have audio. i have tried several programs, and none work. i have read other discussions about this, and found that MPEG Streamclip worked for other people, however whenever i try to convert using this program, it says "Error: Can't Prepare The Movie" Can anyone tell my why i can't convert these videos? i cannot figure it out. thanks alot.

    I am not sure what you mean when you ask what the "compression formats" are.The compression formet refers the manner in which the media was encoded and, by extension, how the media must be decoded. I.e., it determines which codec (encoder/decoder or compressor/decompressor) is to be used with the media file.
    If you can tell me where to find those i could tell you what they are. I can, however, play the video in itunes, quicktime, and MPEG Streamclip.Simnce the files are playable in QT, the most common place to look for codec information is in the "Show Movie Info" window following the "Format:" entry. E.g., it might say:
    Format: MPEG2 muxed, 640 x 480orFormat: Apple MPEG4 Decompressor, 320 x 240, millions
    AAC, Stereo, 48,000 kHz
    i also am not sure if there is audio in the source file.Do you hear any audio when the original file is played? If not and there is no audio track (or "muxed") information, then there may not be any sound for you to convert in the first place.
    how do i find out if it is muxed?If it is "muxed," the format entry we say so. In this case blocks of audio data and blockes of video data are interspersed in a single data stream (track). This is the normal way MPEG-1 and MPEG-2 audio/video data is synchronized. In addition, these formats commonly lose their audio content when converted using QT Pro, iTunes, iMovie, FCE, FCP, or other QT based "frame-to-frame" synchronized workflow. (In the case of MPEG-2 in MPEG Streamclip or QT, the QT MPEG-2 component must also be installed in order to convert the video data alone.)
    most of my videos that won't convert for an ipod are downloaded from the internet. how can i find out if they are corrupted or incomplete?Internet files should always be considered suspect -- especially if they come from a peer-to-peer source. Messages that indicated QT cannot open an otherwise fully compatible QT format is often the best indication that there is a corruption problem or that the files were improperly closed at one point or another.
    most of my videos that won't convert for an ipod are downloaded from the internet. how can i find out if they are corrupted or incomplete?Normally ypu would post them to a web site or FTP storage area and post the URL. If files were downloadedd from a particular web site (e.g., a QT movie trailer), simply post the URL for the particular web page.

  • No sound when convert video for iPod Touch

    I have videos that I recorded with my digital camera and when I "convert for iPod" the resulting video has no sound in iTunes or when I put it on my iPod.
    Any ideas to what is wrong?

    The file you are converting is muxed(audio and video are one track).
    Quicktime is used by iTunes to do the conversions and quicktime does not like muxed files-so you get only video. Another possibility is that the audio is a weird codec that quicktime does not recognize.
    Use a different transcoder-such as mpeg streamclip recommended above. I use it, it works very well. It has iPod presets.
    Get it here: http://www.squared5.com/
    Message was edited by: Johnathan Burger
    Message was edited by: Johnathan Burger

  • Convert Movie for iPod

    From a DV tape, I used iMovie HD6 to develop a movie for my grandson. One output would be a file for his iPod. In doing this from HD6, the result was 320x240 and not 640x360 as with iMovie 08 and 09. Any thoughts on how to make a iPod compatible movie that is 640x360?

    Best way to do this is to use "Expert Settings" in the "Share" menu, then change the size accordingly, this could have an adverse effect depending on the aspect ratio of the original video

  • Error when converting videos for ipod--help needed please! : )

    it keeps saying "unknown error occured -3000"
    *** is that supposed to mean? : )
    i think i have the 5th generation ipod. its the larger gig video one that came out last octoberish.
    i just did the latest updates so i don't really know what else to do & i hate going to the genius bar at my mac store--its in a mall--blech!
    any help would be much appreciated--thanks!
    ibook   Mac OS X (10.3.9)  

    Where are the videos from? are they from a creditable source or from an illegal downloading site such as limewire. most of those videos are not in the correct video format to begin with so apple itunes will not recognize them and convert them. The best way to convert video is to rip your own dvds or home movies and put them on your computer then ipod. There is at least one way on each operating system (windows and mac) to rip your own dvds and then transfer them to itunes and finally put them on your ipod. A mac is the easiest of the two ways. If you have a mac, then you download a program off of the web called handbrake. Simply "google" >handbrake rip dvds< and its homepage should pop up or try <a class="jive-link-external-small" href="http://">http://handbrake.m0k.org). Handbrake allows you to copy and convert your dvds to ipod format. On a windows operating system the most effective way I have found to rip my dvds is quicktime pro($25-$35). You can buy it at quicktime's website. It basically does the same thing as handbrake. I, myself, have simply converted some videos, like sports shows and commercials, to ipod format using itunes and both the video and audio worked fine.
    If you have any ?'s just reply back
    I hope this helps!

  • Converting movies for iPod

    Here is the source of my problem: http://discussions.apple.com/thread.jspa?threadID=1946609&tstart=0
    My problem with iTunes is that I cannot get any DVD ripped to make an mp4 that works on my iPod. I use to be able to use Handbrake to convert some of my DVDs to watch in the car or while I was not at home. But now I cannot seem to add any movie made from Handbrake onto my iPod and inorder to do so I have to convert selection to iPhone/iPod. I would rather not do this because it takes such a long time to run. I guess this is a bit more of a developer question, but how come iTunes takes such a long time to convert a movie? I ran a test on this once and found iTunes took 20 minutes or more than VisualHub to convert a 5 minute movie.

    Bump?

  • 'Convert Selection for iPod/iPhone' makes my movies silent. Why?

    When I choose the 'Convert Selection for iPod/iPhone' option so that I can put my movies on my iPod, all of the audio becomes silent. The picture is fine and only the music/words go away.
    Why? And, if there's a way, how can I fix it?
    (These movies are either from a camera or from friends.... 'mpg' files.)

    Thanks for the reply, but iTunes did not create a new file. I looked in Movies and in TV Shows, and in Music just to be careful, but there is still only one file, the one that doesn't play on my iPhone. I even looked in my iTunes Music folder for a file it may have created an just not imported, but there is nothing there either.

  • "Convert Selection for iPod" Command Increases File Size?

    Hello!
    I'm trying to convert a file that has the following characteristics (as reported in Quicktime Pro):
    Format: H.264 Decoder, 496 x 208, Millions, AAC, Stereo (L R), 44.100 kHz
    FPS: 25
    Data Size: 572.20 MB
    Data Rate: 659.18 kbits/sec
    Normal Size: 496 x 208
    I know the dimensions are strange, but it's because this is just a test I'm running on a workflow using Hand Brake to bring content back from a DVD (my content).
    Now, when I drop just the original file into iTunes and then try to put it on an iPod, it says it can't be played. So I use the handy new option in the Advanced menu, "Convert Selection for iPod." This yields a new file with the following characteristics:
    Format: AAC, Stereo (L R), 44.100 kHz, H.264 Decoder, 640 x 268, Millions
    FPS: 25
    Data Size: 1.36GB
    Data Rate: 1609.01 kbits/sec
    Normal Size: 640 x 268
    How is it that the data rate and file size have increased so much? It now plays on an iPod, but why? I was under the impression that usually the problem with getting video to play on an iPod was a data rate that is too high. So it seems strange to me that the second file works and the first doesn't.
    Finally, what is the difference between a file with the extension .mov and the extension .m4v? The original file has .mov and the converted ends up with .m4v. But they have the same characteristics in terms of codec. So what's the difference?
    Thanks for any help and info!
    Cameron

    I think I was able to resolve this myself after some trial and error. It looks like it is all in the name of the file. I've gotten some files to transfer after going into the Get Info section and updating the name (usually shorten the name or take out non-letter/number/# characters and then get the filename on disk to match.

  • "Convert Selection for iPod/iPhone" and Leopard Issues

    I have a number of movies on my hard drive which I would like to convert for my iPhone, so I right click on them in iTunes and select "Convert Selection for iPod/iPhone." Since I upgraded to Leopard, this function has been taking an extremely long time, about 12 hours for a half hour clip. Versus when I was running Tiger, it would take about 1.5 hours. Is there a way to either fix this or allocate more resources to make my computer work faster?

    Thanks for the reply, but iTunes did not create a new file. I looked in Movies and in TV Shows, and in Music just to be careful, but there is still only one file, the one that doesn't play on my iPhone. I even looked in my iTunes Music folder for a file it may have created an just not imported, but there is nothing there either.

Maybe you are looking for