Chapters show as text in .dv file

Hi there
I have a couple of DV files, exported from (I presume) Quicktime or similar which contain reference footage I use regularly, and have apparently been marked with chapter points. I've just switched to PPro CS6 on the Mac, and I'm finding that the the name of the chapter markers show up as a white bar with text at the top of the video. This persists all the way to the export preview. Picture below. Incidentally, the markers aren't visible in the video in QT player and the like.
Any ideas how to stop this from happening? I didn't happen in CS4 on Windows, but I don't know whether it's a CS6 thing or a Mac thing and I don't currently have access to my old Windows edit machine.
Best,
Keith

With apologies, a self-reply to note that I still haven't found a solution for this and to hopefully bring it to a few more people's attention (posting on Friday probably wasn't the best option)

Similar Messages

  • Textbox shows xml text in working file but now when loaded into another SWF

    Hi all,
    I have downloaded an xml gallery (as2) as we needed one for an old as2 file. Now I mostly use as3 but thought as I only needed to tweak it there would be no probs. Of course, it rarely works out that way. The problem is, text loaded from the xml file is displayed with its corresponding image. This works fine in the file. When I load the SWF into another SWF however, it all works EXCEPT the text doesn't show at all?? Whoever made the gallery used 'device fonts' in the textbox, I don't know if this has anything to do with it. I tried changing the textbox to dynamic and embedding characters but still nothing.
    This seems the key line -
    _root.descmc.desc.htmlText = XMLdaten[number];
    I have also tried
    _root.descmc.desc.htmlText = XMLdaten[number].firstChild;
    This traces out the correct xml data when tested so it is finding it okay.
    Any help would be much appreciated.
    Thanks

    The problem might be in the use of the "_root"  You probably need to set _lockroot = true; in the loaded swf, otherwise the _root is that of the loading swf, not the loaded one.

  • Text created in Premiere showing other text files in the timeline and exports.

    Hi,
    I'm creating slates with text generated in Premiere. For each new slate I am duplicating a text layer, Option + Dragging the duplicate file over the text I'd like to replace, then opening the new text layer in the text editor and updating the information.
    Things seem fine at first and then randomly text layers in the timeline will show text from other files in the timeline. If I open the text file up in the text editor I see the correct info but not in the timeline.
    The only fix I have found is to delete render files, move the text layer around in the timeline, quit and re-open. But still, sometimes when I export, the export preview window will show the wrong text and when I export the file I create shows the wrong text as well.
    It seems like Premiere is getting confused by multiple text files in the timeline and is pointing to the wrong cache files.
    Thoughts would be a huge help!

    Thanks for the tip Kevin. Anything I can do to avoid this in the future?
    I've had this happen on a number of projects. My media and project files are on a SAN, cache and previews are local.
    Thanks,
    Mike Brown
    P: (401) 743-7452

  • How to covert JPEG files (OS 8-9) that show as Text Docs

    I have some old 3.5 mini floppy (1.44mb) disks that I managed to save picture data on (JPEG) but the files show as Text Documents. I have an old PB G4 17" with Tiger and classic (OS 9.1.x) but cannot figure out how or what to use to convert these files. There are other 3.5 disks that have JPEG files that I am able to view so I don't think there was an error made when they were copied, although I cannot rule that out.
    Any suggestions or work arounds will be appreciated.
    Granddaie & Nanna

    Hi, G-N -
    The files may have lost their File Type and Creator codes, or have the wrong ones. Try using FileTyper to change those codes to the correct ones. FileTyper runs in OS 9.
    The correct codes for a JPEG that opens using OS 9's PictureViewer utility (i.e., is a QuickTime file) are -
        Type    JPEG
        Creator    ogle
    Note that these codes are all exactly four characters in length; and that case (upper or lower case) does make a difference.

  • How to make it so that DW shows color-coded text for a file type?

    Hi,
    I work with ".inc" files, which I include into PHP files.
    At the moment DW just shows all of the text within .inc files
    as black. How can I get DW to color-code the text (like it does
    with other files such as html or php) so that I can make it easier
    to read?
    Cheers!

    http://www.macromedia.com/cfusion/knowledgebase/index.cfm?id=tn_16410
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "chuckee" <[email protected]> wrote in
    message
    news:fb6cdb$mno$[email protected]..
    > Thanks for that but I did want to keep the file with the
    .inc extension.
    > In the back of my mind I thought there was some setting
    I could change so
    > that DW recognised new file types.

  • Problems with showing all the text in pdf file

    Hi All,
    I have this problem. When I upload a pdf file to our company website as a link and then when I open it from the link, most of the text in the file is like symbols. The pdf file is a brochure and is exported from CorelDraw. The brochure consists of photos and text. For me is very important t solve the problem, because most of our customers use Mozilla firefox and they must be able to see everything on the brochure.
    Thank you in advance.
    Best wishes,
    Martina

    hello again, yes the development version of the pdf viewer addon is a early snapshot of what will go into future firefox versions. so when the rendering issue isn't apparent in the dev version of the pdf viewer, this means that no bug has to be filed and the fix is already on its way to get into one of the next firefox updates.
    i cannot give you an exact date on when your issue will be going to be solved in firefox, because without an actual pdf sample its not possible to know which bug has caused your issue. however according to the pdf.js developers a fix that is already present in the current developer version will at least make it into firefox 29 (scheduled for the end of april).
    you could test yourself if the issue is still present in firefox 28 (beta) or firefox 29 (aurora): https://www.mozilla.org/firefox/channel/

  • How can I show only text edits and not text formatting when using print comments summary?

    Acrobat 9.3.0 for Mac.
    Here is the scenario: I used the Compare command to see the changes between 2 PDFs. The resulting file some edits are inserts and some are deletions. I want to print a comments summary only showing the text edits. In the Compare Option pane, I select Text and deselect Images, Annotations, Formatting, Headers/Footers, and Backgrounds. Now on the screen I see inserts are highlighted in blue and deletions are marked with sort of a caret and vertical bar symbol. So all looks good at this point. However, when I show the Comments List, I see addtional comments that indicate "Replace - The following text attributes were changed: fill color." Those comments do not appear in the page view unless I check the Formatting check box to show them. With Formatting unchecked, I print a comments summary and all of the "Replace - Fill Color" comments" appear on the resulting comments summary.
    I only want to show text edits, not text formatting changes. So questions are:
    1. Why, when the Formatting checkbox is unchecked, do the text formatting comments still appear in the comments list when they do not appear on the page display.
    2. How can I print only the text content edits and not show the text formatting changes when using Print Comments Summary.

    Hi,
    You can set ExecuteWithParams as default activity in the task flow then method activity to return total no of rows passing to Router activity if your method has value 0 then call Create insert operation else do directly to page.
    Following idea could be your task flow
    Execute With param (default) > SetCurrentRowWithKey > GetTotalNoOfRows (VOImpl Method)
    |
    v
    Router
    1. If pageFlowScope outcome is 0 then call CreateInsert > MyPage
    2. if pageFlowScope outcome > 0 then MyPage
    hope it helps,
    Zeeshan

  • Crystal Report with text(csv) data file, can we set it as input parameter?

    Hi,
    I am a new user of Crystal Reports 2008.
    I have created a report with charts in it. The input data comes from a csv text file.
    Can I set the name of this text file as an input parameter?
    as I need to generate 44 similar reports with different text filenames(and data)?
    Thank you.
    Regards

    Brian,
    Thanks much.
    I did exactly what you said.
    Just to see any change, I first gave a bad report file name just to see if I am accidentally pointing to a different file,
    but I got an error saying report not found.
    Then I renamed my original datafile name and generated a report and it still generated one without giving an error.
    Then I also gave a junk name to the logoninfo and printed that name, the new name was assigned to logoninfo, but the code did not error out.
    It ended up generating the report.
    Now here is what I think is happening,
    1) The save data in report option seems to be still on even though I have turned it off in 2 locations
    a) file -> Report Options
    b) file -> Options -> Reporting tab.
    2) For some reason the logoninfo is getting ignored as well.
    Since I did not see any answers yesterday I posted a link to this thread on the .Net forum
    Crystal Report with text(csv) data file, can we set it as input param? C#
    and Ludek Uher says that I am connecting to the text file via a DAO database engine and so need to use the same code for changing the text file as for changing an Access database.
    But the link he gave me tells me to try the same thing that we have been trying..
    Here is my plan,
    1) I will first try and find out why my save data with report option is still on ( but it shows off in Crystal ).
    2) why is LogonInfo getting ignored.
    Meanwhile any suggestions from anyone are welcome.

  • Missing text in PDF file

    Hi,
    I've just receive pdf file. When I open it it doens't show some text. Not all, just some of the text. When I open the same file in Gmail, the text is there. What is the problem with preview? I don't have anything like Adobe Acrobat. Just Mac OS X.
    And also I don't see the text in iPhone/iPad.
    In Windows, everything is ok.
    Can I fix it somehow? The file I've received was invoice and some important text was missing...
    Thanks for any advice

    Given it's a problem on both platforms suggests the PDF has a specific incompatibility with Apple's core PDF rendering technologies. While it still could be a font, the only way to address this for the iPad and iPhone would be to edit and re-save the PDF.
    Adobe Reader is available for iOS, so if it ultimately is a matter of viewing the PDF then this may be the only option. The alternative is to have the creator make another version that uses different fonts or otherwise tweaks it to display properly.
    There are other PDF viewers available as well, so Adobe's is not the only solution. It's just one example of what you can do to view the PDFs.

  • Publisher pdf won't show colored text

    Using Reader 11.5 and Publisher 10 in Windows 7. Text colored red in a text box to differentiate it from the black text in Publisher only shows up as a shade of grey when file is saved as a pdf. Color graphics are saved in their colored form as expected.  Why??  How do I get Reader to show the text color like it does the pictures?

    Hi,
    You may get help out of this..
    http://go.adobe.com/kb/ts_329677_en-us
    Are you using script to import PDF in Indesign or just placing the first page?
    Cheers,
    Swapnil

  • How to read text in .kep files

    hey friends,
    how to read text in .kep files
    please help me .
    with regards,
    s.jagadeesh babu

    Hi,
    check this link:
    http://help.sap.com/saphelp_nw04s/helpdata/en/8f/42a293e35011d29b340000e8a4b41d/content.htm
    .kep files are SapShow Training Files. They can be played with sapshow.exe in Knowledge Warehouse.
    SAP Show is KW Viewer Application. You can use it to see “Kep” files. It can be run in windows without the SAP environment. To run SAP Show (4.6D version) you just need 3 files. First is SAP show executable file, another two are “Sapstg.dll” and “ZLib.dll”. You can easily find these files on internet.
    Regards,
    Niraj

  • From browse button of input type=file, can I show the content of a file

    Hi all,
    I am using, input type=file, where browse button appears. I am having a text area. My requirement is after I select the browse button, I need to show the content of the file in the text area. As of now I 've handled by having another button 'show', which should be pressed after browse done. But, How to handle it in the browse button itself, how will I get that action event from browse button. Plz help.
    Regards,
    Sam

    I think someone asked a very similar question here,
    http://forum.java.sun.com/thread.jsp?forum=45&thread=501889
    check the thread, it may help you.
    -S-

  • Can I export just the "show" conditional text to a mif?

    When I export a document with conditional text to a pdf, just the conditional text that is set to "show" (and the unconditional text) appears in the pdf.  That's good, but I want the same thing when exporting a mif.  There are two reasons for this:
    (1)  We have an in-house tool that parses a mif and extracts data from certain tables to populate a database.  The tool doesn't parse pdfs.  And the tool won't always handle conditional text correctly, particularly conditional text table rows.  The tool would work fine if the conditional text were already "resolved" during the export to mif.
    (2)  I'd like to use the Boolean logic for conditional text that is available in FM9, but I need to furnish files to other groups in the company that use FM7.  Their FM7 wouldn't display conditional text properly if it depended on anything other than OR logic.  But they would be happy to accept mif files that didn't have any conditional text because it had been "resolved" when I generated a mif7 file for them.
    I've tried various ways to convert a pdf into a mif file, but no process seems to preserve the formatting and the editable text. I'd be willing to accomplish this in some round-about fashion involving Framemaker, Acrobat Pro and/or some other tool. 
    But the happiest outcome for me would be to discover that FM9 already has the ability to export just the "show" conditional text and the unconditional text to a mif. 
    Or can this be done by making a copy of the document and then somehow automating the deletion of the "hide" conditional text and the conversion of the "show" conditional text to unconditional?

    Or can this be done by making a copy of the document and then somehow automating the deletion of the "hide" conditional text and the conversion of the "show" conditional text to unconditional?
    Writing a custom script to filter the MIF to parse out the conditions is non-trivial. You can try a Google search for an existing filter or script that does the job. However, if there is no such thing, then you're on the right track, getting FM to do the hard part - filtering the conditionalized content correctly. For example:
    * In a copy of the original file, delete the condition(s) you want to hide; during the deletion, you have the option to delete the corresponding text. Then save as MIF to a descriptive name, or save as .fm to a new name, then open and save that file as MIF. Close the source file without saving.
    * Reopen the source file and do the same process from this fresh instance, deleting the condition(s) you want to show. Save as above.
    * Within FM itself, however, there's no way to automate this process. With one of the free FM utilities - dobatch from cudspan, or dzbatcher from datazone - you can script opening and saving an FM file as MIF. Search Google for dobatch, cudspan, dzbatcher, or datazone.
    * To automate setting the conditions, a keystroke-macro recorder might serve, otherwise you'd need the commercial FrameScript product, and a customized script if there's no existing script for this purpose. For FrameScript info, check with Rick Quattro at frameexpert.com. 
    * If you're using Structured FrameMaker and have the expertise available to customize an EDD, you could take advantage of the "filter by attribute" feature, but it's not trivial to adopt Structured FM just for this narrowly-focused need.
    HTH
    Regards,
    Peter Gold
    KnowHow ProServices

  • More than 1 line of text when using text generator from file?

    hi
    have 8 line blocks of text to show onscreen.
    would like to use text generatorn>from file
    all they seem to print is one line.
    is there a work around?
    have trhied soft returns and paragraphs on saved text file.
    no change.
    anyonre know how to get 2 or more lines of text?
    thanks in addvance!

    Select the File generator layer and in the Inspector, select the Layout pane and in Layout controls, set the Layout Method to Paragraph.  Narrow your margins and the text will "flow" into multiple lines.
    You can also keyframe the paragraph layout position. [Probably more info than you want here.]
    That said, you can only display *one line* at a time per File Generator. (If you're up to date with Motion [v5.1.2], you can use more than one File generator.) The generator does not accept any other characters for returns other than newline and carriage return.
    I've never tried it, but thinking about it, you can set Tab stops in the Paragraph layout (double click in the layout rectangle and a ruler should appear over the top -- right click on the ruler to set tabs). If you go back into the original text file and where you need to break lines into two or more, setting a left tab stop in the layout very near the end of a line might force the tabbed text into the next line (did I make that clear enough??)

  • How to use OCR Font A type by the time of writing some text into Pdf fil

    Hi,
    I am generating one pdf file in java. How can I use OCR Font A for text of pdf file ..Please can any one help where can I get OCR Font A and how to use that one in java ... I want to write some text into pdf file and that text should use OCR Font A family ...
    Thanks.

    This document shows how to disable OCR during conversion; just do the opposite: https://forums.adobe.com/docs/DOC-3062

Maybe you are looking for