Chara to cube or ods
Hi,
Is it possible to trasnfer data from chara bearing master data to cube or ods...if possible how? What happens when we create export data source for chara????
It will prefix the 8 before ur technical name.
You can load it to ODS not to cube. To load into ODS take the main characteristic in KEy fields in the ODS, and the attributes in the data fields. Please let us know if u have any compounding attributes in ur master data object.
Khaja
Similar Messages
-
Hi All,
I need to Add on Char to Cube. It is there data source (LO extractor) upto IS no problem. I can add in infocube also.
There is no ODS between.
Delta are running in production on this cube.
What about historical data for that Char.
What is ways to populate?
Please help me..
Thanks,
KN
Edited by: kumaran nayak on Feb 26, 2008 10:57 AMThanks Ashok,
U mean:
1) In Dev: I delete data from Cube. Add the Char, Make chages for IS and then?
(I need to transport first or i need copy the cube first? in
production)
2) For Historical Data: U mean
Make a copy of the cube and then chages and full load to new cube or old cube? New cube ...Right
If it is correct, we delete request from old cube... then we can do full load.
Please let me know. thanks for your hlep.
Thank,
KN
If you want historical data, make a copy of the cube and do the full load. When you see everything is alright, all data is in your new cube, do the changes in existing(old) cube and load data from new one to existing one. You should be alright. -
Hi all,
i wanted to create an infocube which gets its data from a flat file, and i was wondering if there is any documents which will help me to acheive my goal.
regards,
Message was edited by:
Mohamed AhmedHi Ahmed,
I am not sure what you want, your subject says that 'creating infocubes with ODS'
whereas you message says that, you need to create a info cube..what is your exact requirement..?
If it is the case of creating info cube for a flat file structure.. you need to identify
the corresponding fields in R/3, related BW info ojects and then creating an info source for the PC souce system, then generating transfer strucure and then
creating an cube with selected char. and keyfigs. then creating a update rule with
the defined infosource and creating an info package and loading data from an
extranal source..
If it is the case of creating a cube with ODS then you need to select the infosource
as your ODS info source while creating the infocube as well as creating update rule.
Hope this helps..
assign points if useful..
Cheers,
Pattan. -
Can I use one infosource to update data to CUBE and ODS???
Hi all,
Can anyone tell me if I can load data to OSD and Cube from one the same InfoSource? As I know, I have to have "0recordmode"(update mode) in communication structure for ODS not for Cube. So how can ODS and Cube use the same Infosucre to update data?
Thank youJohn,
Depending on the volume of data and the type of infosource, sometime one update to ODS first and then subsequently update to the Cube or update both cube and ODS in parallel.
For example, if you use AR or AP line item datasources, since you are extracting from both open line and closed line items tables, there could be multiple records for the same thing coming through. First when it appears as an open line item, and when it is paid, it appears again as a paid line item so if you update directly to the cube, you can have multiples of the real value. Thus in this instance you update from infosource to ODS then subsequently use delta update from ODS to cube. CCA and C0-PA on delta mode are example where there are no overlapping, thus you can update both ODS and Cube at the same time.
Hope this helps,
Mary -
Looking for a specific data in all the cubes and ods
Hi Gurus
"i am looking for all the cubes/ods that contain a specific Controlling area(lets say 0123) and a specific 0plant (lets say plant 4567), now i can go down to every cube and ods and search for it in its contents but i have like hundereds of cubes it will take days, is there a simple way to look for some particular data in all the cubes/ods, and it tells me which cube/ods contains these plants and controlling area."
<b>now based on this above post i got a reply that abaping can help.</b>
"you could write an ABAP where you call for every InfoProvider function RSDRI_INFOPROV_READ_RFC like
loop at <infoprov-table> assigning <wa>.
call function 'RSDRI_INFOPROV_READ_RFC'
exporting
i_infoprov = <wa>
tables
i_t_sfc = i_t_rsdri_t_sfc
i_t_range = l_t_rsdri_t_range
e_t_rfcdata = l_t_rsdri_t_rfcdata
exceptions
illegal_input = 1
illegal_input_sfc = 2
illegal_input_sfk = 3
illegal_input_range = 4
illegal_input_tablesel = 5
no_authorization = 6
generation_error = 7
illegal_download = 8
illegal_tablename = 9
illegal_resulttype = 10
x_message = 11
data_overflow = 12
others = 13.
endloop.
i_t_sfc should contain 0PLANT and i_t_range the restriction on you plant value.
with a describe table statement on l_t_rsdri_t_rfcdata you can get the hits.
check test program RSDRI_INFOPROV_READ_DEMO for details
best regards clemens "
<b>now my question is how do i use this code to check each and every cube in bw, it seems like it is meant to be for only one cube at a time. and what does he mean by "for every infoprovider function"</b>
thanksTHANKS
-
How can we know what r the reports done on a particular cube or ods
Hi Fnds ,
I just want to know what r the reports done on my CUBE or ODS.
is there ant specfic table or t-code for that.Hi Ravi,
Double-click on your DSO/ Cube, go to the 'where-used list' option on the top right-hand side. When you drop-down, you can see all the objects where the DSO/Cube is used. If it is being used in a query, the same would be displayed
Rgds,
Sonal -
How to find number of records in a cube and ODS....
Hi,
How do we find total number of records in a cube and ODS?
Is there any Tcode for this ?
From the content it is difficult to get the number of records, if it is more in number.
Thanks,
JeetuHello ,
Please check the following thread,
Number of records in a infocube
hope it helps,
assign points if helpful. -
After upgrade to BI NW4.0S issue in loading cube from ODS
Hi,
I have an SAP delivered ODS(0CRM_OPPT_H) which I was loading for some time. The cube 0CRM_C04 was loaded from the ODS a couple of times. I have now deleted all the data from the cube and want to load the data from the cube to ODS, In between our BW was upgrade frpm 3.5 to BI NW0S..
I have done all prerequisite , replicated the 80 datsource , deleted and re activated the update rule and transfer rule again.. and then tried to load the Cube from ODS.. however everytime I am getting the following error
DataSource 80CRM_OPPI does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 12/23/2005 10:09:36.
The time stamp in the BW system is 11/09/2005 13:02:29.
Is it due to the upgrade?? I have done everything so that this dosen't happen, still could not resolve..
ThanksAre you sure you've replicated the DataSource 80CRM_OPPI? Try replicating it individually again. If that doesn't help, have you tried reactivating the ODS Object itself?
Regards, Klaus -
HI
Data source has given to us now how to identify whether i need to load data to the ODS than cube or directly to the cube
thanks in the advanceKiran,
There are reasons why data has to be loaded to cube or ODS.
1. If the data source supports only full load (help.sap.com you can find out), and if the selection condition remains the same then before each load you may have to delete the old request and load a new request. This can be avaoided if you load data via ODS. data SOurces such as 0CO_OM_WBS_1 etc.
2. If the data source supports delta and if it gives you only after images status while extracting them to find the difference you would have to load the data only thru ODS. example 0FI_GL_4, 0FI_AP_4, 0FI_AR_4. Though these data sets supports delta, it is all after image data source. so it has to be loaded via ODS.
These are the simple reasons to load via ODS. You can load directly in to a cube, but the best practice is always to maintain data ware house layer or application layer before loading to the cubes.
Hope this helps.
Assign points if it helps.
Alex (Arthur Samson) -
Cube or Ods design datamodelling question
Hi gurus,
I have below data coming from 2 different source in 2 different ods---
ODS1
INo....Lookup No.....Material....
11.....a11..............mat1
12....a12...............mat1
13.....a13..............mat2
14....a14...............mat2
another datasource is bringing data in ods2 like below:::
INo....IdentifierParent...Unique--Identifier......Valid from................Valid to
11......777......................771.............................1/1/2010................12/1/2010
12......777......................772.............................1/1/2010................12/1/2010
13......778......................773.............................1/1/2010................12/1/2010
14......778......................774.............................1/1/2010................12/1/2010
Q1----now if i build ODS3 which has update rules of ODS1 & ODS2, with Key = INo.
How will the data look like ?????
Q2----If i build Infocube with update rules from ODS1 & ODS2 (no ods in between) how will the data look like
Q3----also is there need of Key in Update rules from Ods to Infocube ??
just tryinng to understand the data storage techniques in cubes vs ods
and advantages of infocubesHi,
Here are the answers for your queries.
Ans 1: If your ODS 3 is having Key a IN0 then this will be the data in ODS3 after completing loadind data from 2 ODSes
INo....Lookup No.....Material...IdentifierParent...Unique--Identifier......Valid from................Valid to
11.....a11..............mat1..........777......................771.............................1/1/2010................12/1/2010
12....a12...............mat1.........777......................772.............................1/1/2010................12/1/2010
13.....a13..............mat2........778......................773.............................1/1/2010................12/1/2010
14....a14...............mat2.........778......................774.............................1/1/2010................12/1/2010
Ans 2:
If you do loading to Cube then all the records from the two ODSes will be added depending upon the sequence of the laod as shwon below
INo....Lookup No.....Material...IdentifierParent...Unique--Identifier......Valid from................Valid to
11.....a11..............mat1.......... ... ....... ..............
12....a12...............mat1.......... ... ....... ..............
13.....a13..............mat2.......... ... ....... ..............
14....a14...............mat2.......... ... ....... ..............
11... ............. ....... 777......................771.............................1/1/2010................12/1/2010
12.... ............... ........777......................772.............................1/1/2010................12/1/2010
13..... .............. ........778......................773.............................1/1/2010................12/1/2010
14.... .........778......................774.............................1/1/2010................12/1/2010
You need to goo for some lookup routines if you want to fill cube in similar manner the ODS 3 has data in it..
Hope it helps you... -
How often cube or ods is loaded
Hi all,
Can you plz help to find the easy way to find out how often a cube or ods or any object is loaded say daily or weekly . how to find it easily when i have many objects.Hi Bhavani,
if your cube is getting loaded from ODS then copy the technical name of the update rules of ODS go to infosource tree and then find that particular technical name there. You will find the infosource associated with the ODS then find the infopackage which is associated with the process chain. Double click on every infopackage, the moment you ll double click it then it will display the msg saying "infopkg already in process chain". click ok and go ahead.
You will find yourself under schedule tab there you can find your process chain name just click on the icon which is in the other side of start button.
Copy the technical name of the process chain and go to RSPC and find this pc. Open the pc and right click the start process-> change selection->Periodic job button. There you can find the schedule frequency .
Hope this helps
Edited by: Anup Chaudhari on Nov 19, 2008 5:56 AM -
Can we add new cubes and ODS after creating the multiprovider?
Hi all,
i created a multiprovider on a cube and ODS. Now i needed one more charactersitic from other cube.then i did change multiprovider and then add that new cube and did the identification, and adjusted the query, when i ran the query it is showing chracteristic as # and not assigned. I even tried bringing in 0infoprovider object to see whether data is coming from third infoprovider, it is not showing up any data from third one. i tried logging out of bex and logging back in.....but still no use..............i am wondering now, once a multiprovider is created can new infoprovider be added to it ?
i am even able to see the new key figures and chracteristic in my query.but data is not getting populated...i also checked and found that the data is available in the infoproviders....
plz help me out..
points will be assigned for inputsHi Bhanu,
nice to see your answer, I saw a lot of helpful posts on SDN by you.
I did the RSRT with debug multiprovider, it said,
0FISCPER: General restriction for InfoProvider ZSD_C12 not possible
Access to ZSD_C12 was excluded
now i corrected it, it is populating the key figure now but not the chracteristic still.....the chracteristic is still getting value only from one of the info providers
importantly, when i bring infoprovider above the keyfigures space on query, it still only shows two info providers for each key figure and not the third one ,the key figure coming the third one is only shown in overall result. how can i solve this?
i tried rsr_gen_direct_all_queries as told by krian, but still cant get the data in the report. i did list cube on mulitiprovider and i see the data for that chracteristic there....
are there any other options in RSRT to find possible setting faults....
thanks in advance
points will be assigned for inputs -
Hi all. Please tell me in brief about update types for ODS and InfoCube. I know there is something Addition,No update,overwrite. But I do not know how they work.
regards
rajeshHi Rajesh,
No Update means - no data is updated into the target (Cube or ODS).
Overwite - Only for ODS, not possible for Cube. this iwll overwrite the exisiting enrty in the ODS with the new values.
Aditive - The records would be summed up ... Cube can only work either in Additive or No Update mode.
Hope this helps.
best regards,
Kazmi -
Update Problem in CUBE from ODS.
Hi Experts,
I have problem in Updating data from ODS to CUBE and ODS to INFO-OBJECT.
In brief, ODS has the Up-to date data ( Means till today - 28/07/10 ) . But the cube has Data till 22/07/2010. If I am trying to activate the ODS , Its is showing NO REQUEST TO ACTIVATE. And the DATAMART status is also not available . But the thing is , I checked in ODS till 22/07/2010 also DATAMART status is not available. And Its a Delta .
Please help me out, How can I update the data In CUBE and to an Info object.
Thanks,
Sethi.Hi ,
I got the point , I am showing how the request are there in date wise.
In ODS :
CRM Sales Contract Item:Delta 29.07.2010
CRM Sales Contract Item:Delta 28.07.2010
CRM Sales Contract Item:Delta 27.07.2010
CRM Sales Contract Item:Delta 26.07.2010
CRM Sales Contract Item:Delta 25.07.2010
CRM Sales Contract Item:Delta 21.07.2010
CRM Sales Contract Item:Delta 20.07.2010
CRM Sales Contract Item:Delta 19.07.2010
It's Showins , there is missing REQ after 21.07.2010 .
In INFO-CUBE
Delta Package for Update 22.07.2010
Delta Package for Update 21.07.2010
Delta Package for Update 20.07.2010
Delta Package for Update 19.07.2010
Delta Package for Update 18.07.2010
It's showing , there is no data in INFO CUBE after 22.07.2010 and in ODS the same Date Request is Missing. So my DELTA go Inactivated. After Updating the REQ on 22.07.2010 to CUBE , Unfortunately DELETED without maiking that RED. My mistake was that.
Please guide me ... What should I do ? Should I delete the Data in both CUBE and ODS. And Reload .
Thanks,
Sethi.
Edited by: ukumar on Jul 29, 2010 4:19 PM -
URGENT: Data discrepency for Cube and ODS 0fi_ar_4
Hi all,
I am having problems for ODS 0fiar_o03 and Cube 0fiar_c03...
They have been initialised a year back and delta was running almost correctly since then. ..some sometime in August they started showing discrepency from standard R/3 code FBL5N.
The cube and ODs are having exact data till 31/07.2006 .
I tried to delete all data in Cube and ODs by selective deletion of fiscal periods 005.2006 to 008.2006 and reload again from R/3..but still data not matching. Why is that so?
Please suggest steps to correct it. Will assign points.Dear Andy,
First tell us that how can you say that data is inconsistent? I mean on what criteria you consolidate data.
Secondly have you checked in R3 that after 31.07.2006 was there any change or anything new (company code or smthing) added.
My suggestion would be;
First:
1. Go to RSA3 (in R3) and check that are you able to see(pull) the data you want.
2. Now check wheather it is coming in BW or not?
3. If coming then manually update cube through data mart.
Second:
1. if not able to get data through standard extractor then try to load by flat file. (last option)
2. check wheather deltas after your repair full upload are giving you correct deltas or not? if not then re-initialize and reshedule deltas.
Hope it helps, do revert.
Maybe you are looking for
-
Hp dv7-1245dx media smart button dont work
hi, i have a hp pavilion dv7-1245dx, i format de drive c and install the windows vista 64 in spanish because im in argentina, but before search and install all drivers,my media smart quik lunch button dont't work, I intall all drivers from the hp web
-
Personal Hotspot not working with my MacBook Air
Hi Community So I have an iPhone 6 and a MacBook Air (Mid2013), who both meet the requirements for the new personal Hotspot in iOS8. I connected the 2 devices and it worked for some time. I could activate the personal hotspot without even touching th
-
How do i display an image on a GUI?
I am making a GUI, and I was trying to post an image(s) on it. I tried various things including turning it into an applet and using the paint(Graphics g) method, but it didn't show up. Thanks!
-
The font for my toolbars/menus/tabs/awesome bar are wrong.
I downloaded F4b8 yesterday and found that the font used in the toolbars/tab titles/address bar/menu were wrong. At first it was showing as Algerian something or other, which I believe was a font I had installed. I deleted this font, and the font in
-
I have a spooling problem. i would like to display header row only once. my select gives back 500 records, i need to display header row in pipe delimited file. the problem is that the spool file header is creating with only few columns. lets say tabl