Character Animation Help (PLEASE RESPOND)

When I animate my character with classic tweens, the arm always detatches from it's source. Does anyone know how to fix this WITHOUT creating new keyframes or using motion guides? Please answer!

you have a character with an arm. if you place that character on a timeline (with no tween) and test your movie, the arm stays where it should, correct?
you then animate that character with a motion tween (in which case you would expect the arm to stay where it should) or are you using a shape-tween (and then all-heck could and, in your case, does break loose)?

Similar Messages

Flash character animation help

Greetings,
I have a character animation that involves a lot of walking, I currently have the feet and upper body fully animated, I was wondering if there was a simple way to get the upper and lower legs to track the feet and hips.
I animated the feet and upper body by creating keyframes and manually positioning each symbol at every keyframe, I was just hoping there was a simple solution for the legs rather then having to manually position each one at each keyframe.

Hi,
If you want to get started with the flash animation make sure to start learning how to use all the image editing tools that may come handy with your animation. You animation doesn't seem that complicated but it will take quite some time to gather all the symbols and images(cartoons).
Here is a website that offers some tips regarding basic flash animations:
http://www.entheosweb.com/Flash/default.asp
Look into these three main guides(it will give you a better understanding on what to do with your objects and actions)
Motion Tween
Motion Guide
Bouncing Effect
Hope this helps you,
Vicente Tulliano

Help please respond my iphone won't turn on

It's been charging all night last night and all day this morning and you know when it is in the process of turning on and the apple comes up, well every single time after the apple comes up it doesn't turn on normal, the apple just disappears and the entire screen goes black with just a loading circle in the center and it has been doing this for over 12 hours. I've tried to reboot it by holding down the circle button and the top button together and it turns of completely that way and then I turn it back on but it still goes to that black screen with the loading circle. Long story short, my phone won't turn on. Please respond if you know a way to fix this.

Here are steps to get DFU Mode: Open iTunes on computer. Connect iPhone to computer. (some turn off iPhone here, I do not) Hold both home and power buttons for exactly 10 seconds, release power button, keep holding home button until iPhone recognizes iPhone in Recovery Mode. Usually takes 10-20 seconds of holding the home button. If the iPhone screen is black (blank) the iPhone is in DFU Mode.

DVD from Animations - Help please if you can

We have an 3min animation sequence that needs to be put to DVD.
Animation was created in Maya, it's a 3D building walkthrough, constant movement.
It is supplied as AVI (video track is WRAW) 720x576 (for PAL)
We have placed it on FCP sequence set to Animation, best, millions colours, keyframe every frame.
Sent to compressor - 8Mbps CBR, best motion, GOP size =7 / Structure =IBP, closed.
The resulting M2V looks fine in QT
It also looks fine in DVDSP Simulator
However the DVD created (from an image) both in Apple's DVD player and on set top players looks badly pixelated, grainy and flickery.
Is there something in the make up of the animation that doesn't suit DVD playback? Why wouldn't we see it in the Simulator?
Any help greatly appreciated.

Thanks Colin,
I have exported the supplied file as QT movies using different QT Codecs, DV PAL, Animation, Motion JPEG, also DV stream. If the option is there I have set the field order to Lower first. I have also imported the supplied AVI to FCP onto sequences with differing compression settings as above. All produce the same effect.
I have exported the AVI from QT as an image sequence, once as is and once with the deinterlace ticked in movie properties and imported each image as a frame to FCP onto a DV PAL timeline, this you would think would work around any issue of field order and behave as the sequence settings dictate? I get the same result, the final DVD image looks fine in DVD Player, unless you UNTICK "deinterlace" (which is wierd in itself), then it flickers badly, as does a DVD written from the image.
The best result I have had so far is following your instructions (thanks) in another post for 24fps NTSC, the final DVD was not flickering anywhere as badly but motion overall was a bit jittery. Is there a work around for animation like this with PAL do you know?
Also - maybe this might be a clue?
When I have the clip looking fine in FCP as a DV clip or image sequence on a DV timeline, with the play line stopped or running, the Canvas ONLY looks good at 100%, anything smaller or larger creates this striping moire effect on the image, visible even with the play line in stop.

I'm having an issue. if anyone can help please respond.

I have a WRT400N router, I have my ps3 and my desktop computer hooked up wired to this router. As far as I know the wired connections randomly disconnect and reconnect. My ps3 and desktop disconnect from the internet and moments after reconnects by itself. I have no idea what is causing this issue. The wireless seems to not have the problem. Its not my ISP my modem lights remain on and internet access for the wireless connections seems to have no problem. What is going on with this? i'm at a lost and it is very annoying to lose connections 2-3 times a day like this.
Does anyone have any idea whats going on?
BTW I have brighthouse's Road runner cable connection.

On your Router under the wireless tab click on the "Advance Wireless Settings" tab and below change the Beacon Interval to 50,Change the Fragmentation Threshold to 2201,Change the RTS Threshold to 2202 and Click on Save Settings...
Now see if you can locate your Wireless Network and attempt to connect...

Apple ID Help - Please respond

I want to create my own Apple ID. I know how to set it all up, but I have a problem.
I've been using my parents' Apple ID as my own for quite a while, which is also used as my brother's (only my parents know the password). Whenever I use a gift card, it's also used by my brother. There are other issues as well. For instance, to sign into my parents' account to even post this on the forum, I need them to come and sign me in. Therefore, I'd like to create my own account.
However, I also would like to keep all of the songs, movies and apps I have purchased with my parents' Apple ID.
There lies the problem - if I create my own account, my iTunes will think that I've been taking those songs, movies and apps from my friends and I won't be able to sync my iPhone well. Pretty much the same thing as when you get songs from your friends' iTunes and plug in your phone to your iTunes.
Any suggestions on how I may be able to merge these accounts or any other solutions?

iCloud is a cloud service to sync iOS devices to one another and to your Mac or PC. It is also used to store iOS device backups. The only way to use iCloud is to set it up via an iOS device or via a Mac. You cannot set it up via a PC, and there is nothing you can use on it if you do not have an iOS device.
Sorry,
GB

The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

I tookyour suggestion and SUCCESS! I can now access the Itunes Store. A simple fix, and thanks so much!!.
Below is the advice you forwarded:
I found a solution to my problem.
> start menu
> accessories,
> right click on the command prompt icon and choose "run as administrator".
Once it opens, type in the following command...
netsh winsock reset
hit enter
You should get a message that the winsock reset successful and you will need to reboot your computer.
Reboot and when I reloaded itunes the store loaded fine.
Thanks again, -Dean Stoneburner

HT1977 I did this and a bar showed up at the bottom and now I cant click on the apps and cant transfer them. Please help because I have accidently deleted the App store from my i pad 1. I am not very technoligically advanced so please respond in a noncomp

I synced my ipad to my itunes store on my computer and a bar showed up on the bottom of the screen showing how many gigabytes i was using. Now i cant click on the screen to move the app from itunes to my ipad for some reason, or my movies/ music for that matter either. The real reason i am doing this is because i accidently erased the app store and dont want to erase all the apps i already have on their. So if someone can help me get the app store or fix the syncing problem that would be great because i use it for school which requires certain app be installed. Please respond quickly!

Jimmyt97 wrote:
Now i cant click on the screen to move the app from itunes to my ipad for some reason, or my movies/ music for that matter either.
What are you talking about?

My touch screen is not responding, I have reset the phone, plugged into different charger and tried to update it to itunes but they will not connect because I cannot put my passcode in, HELP please!

My touch screen is not responding, I have reset the phone, plugged into different charger and tried to update it to itunes but they will not connect because I cannot put my passcode in, HELP please!

ME TOO. NOW MY IPHONE 6 PLUS IS SAME LIKE YOU.
iphone is diabled- connect to iTunes because i forget passcode.
i cannot connect iTunes because it's always asking to enter passcode on iphone.
So, i cannot make restore my iphone 6+. And then, I cann't erase "device" in icloud.
My iphone is new. No icloud. didn't connect to itune backage.
That's why I try to connect iTunes but it need to enter passcode.
So, my iphone just keep "iphone is disbled-connect to iTunes".
IPHONE 6 PLUS

TS3274 What woud I do if my screen is not responding? I can't unlock my mini ipad because the touchscreen is not working. help please.

Hi guys, please help me. my son's mini ipad cannot be unlocked because the touchsreen is not responding.. help please. thank you.

A reset should help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

Just upgraded my iPad to IOS5 and when the download was completed, a window said that there was an error and it could not restore. Now I have a black screen with the Apple logo and the circle lines. None of the buttons respond. Help, please!!

Just upgraded my iPad to IOS5 and when the download was completed, a window said that there was an error and it could not restore. Now I have a black screen with the Apple logo and the circle lines. None of the buttons respond. Help, please!!

Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. Maybe this will let the iPad reboot and then you may need to restore again but see if this helps to start the iPad first.

Firefox frequently 'not responding' having auto-installed version 10 yesterday. No previous problems. Have disabled all plugins and uninstalled and then re-installed Firefox several times today. Problem persists. Can anyone help please?

Firefox frequently 'not responding' having auto-installed version 10 yesterday. No previous problems. Have disabled all plugins and uninstalled and then re-installed Firefox several times today. Problem persists making continued use of this browser very unlikely unless a quick solution is found! Can anyone help please?

Perform the suggestions mentioned in the following articles:
* [[Firefox is already running but is not responding]]
* [[Firefox hangs]]
Check and tell if its working.

Apple iPAD 2. Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment. Can you help please?

Apple iPAD 2. Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment. Can you help please?

Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears. See if that clears the glitch.

New mail button does not respond so can't write mail. help please?

New mail button does not respond so can't write mail. help please?

I am no expert, but open your mail, go to the top of your apple bar click the apple sign then force quit mail, restart and it may work.
I had this issue before and it was resolved.

IPad stops responding, showing the Apple logo only,i tried to place into recovery mode and attempted to restore again but brings error in downloading s/w message.can anyone help please.Thanks

iPad stops responding, showing the Apple logo only,i tried to place into recovery mode and attempted to restore again but after downloading the software, it brings error in downloading s/w message.can anyone help please.Thanks

http://support.apple.com/kb/TS3694#error14
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.

Character Animation Help (PLEASE RESPOND)

Similar Messages

Maybe you are looking for