Character display in the BEX
Dear colleagues,
My BEX reports display the character " ' " for part of the blank cells.
I would like to remove this character BUT not replace it by something else (such as 0) : I need a "real" blank.
Does anyone have a clue ?
Thanks for your help.
Regards,
Thibaud
Solved
Similar Messages
-
Need help on displaying Cells in Bex Analyser
Hi all,
I am showing the report in Bex Analyser.In Bex, unfortunately, the the seperate Cells are not displaying in the report.The report is showing only data with no cells displaying.Pls help on this.
I hope some settings has to
Thanks,
Jelina.Thanks for the reply.
In my report, the Cell borders are not displaying in the Bex Analyser.Only data alone is displaying.
Is there any options available enable the Cell borders in the Bex Analyser.
Thanks in advance.
Thanks,
Jelina. -
Removal of Compound attributes of an info object in the BEx display
Hi,
i have a Info object Parentid which is compounded with the Parent Source and a Date.
I have to remove the compounded attributes when I am displaying the info object Parentid in the BEx report.
What is the best way of doing this?
Any help is deeply appreciated
RegardsHi Arvind,
put the compounding attributes into the filter section and make sure the ouput is restricted to only one compounding value.
regards
Siggi -
How to display Some message in the BEX Explorer
Hi Experts,
We have a scenario where we will check for a condition in the User Exit Variable.
Depending on the condition we need to stop the execution of the query and display some message.
Can any one please help me in explaining me how to display message in the BEX and stop the Query Execution.
Thanks in Advance,
PremkumarSomenath,
I think from what I gathered in the other posts on SDN about exceptions that it can be used only within a function module and not directly ..
http://help.sap.com//saphelp_470/helpdata/EN/9f/dbaa0635c111d1829f0000e829fbfe/content.htm
Try creating a Z Function module to display the exception but then the exception would stop only your Z Function module and not the user exit from going further..
Arun
P.S some more dope on the same with regard to raising exceptions in programs ( in your case ZXSRU01)
http://help.sap.com/saphelp_nw04/helpdata/en/55/bff20efe8c11d4b54a006094b9456f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/83/636d2012fc11d5991e00508b5d5211/content.htm
Message was edited by:
Arun Varadarajan -
Bex Analyzer displays # in the Blank Fields
Hi Experts,
When I execute the Bex Analyzer. The display gets the # in the blank field.
Can anyone tell me how do IHi Vikram,
Thanks for your reply,
When you say
--> Change the query properties to " display blank value as "
I don't get it. Could you tell me where do we have display blank value as
Please reply,
Thanks -
Getting zero to display as the first character
I know this should be simple, but I'm trying to get a zero to display as the first character in a field when necessary. For example last 4 of SSN. Any help would be appreciated.
Hi,
You can achieve this in the Patterns dialog. Select the object and go to the Object > Field palette. There you can click the Patterns button and edit the Display Pattern.
For example, this would display a number without leading zeros: 12
num{zzz9}
Whereas if you use 9 it will display leading zeros: 0012
num{9999}
Hope that helps,
Niall -
Both machines are running windows 7, Zotero 3.0.13, and Firefox 18.0.2. I cannot find any settings that are different, so I'm not sure why this character displays properly on one machine and not the other. The character is U+A722 = Ꜣ
Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
Try to set the gfx.content.azure.enabled pref to false or if this didn't help disable Direct2D by setting the gfx.direct2d.disabled pref to true on the about:config page and leave hardware acceleration otherwise enabled.
*http://kb.mozillazine.org/about:config -
Value displayed in the cube but not in BEx query
Hi gurus,
I have the field for no. of orders (ANZAU) in the datasource 2LIS_11_VAHDR. It is displaying all the values in the column as '1' in the RSA3 and also in the cube but when the same field is selected in the query there is no display of value '1' .In the query all the values shown in the column is '0' .what is the reason.
How to display the correct value '1' which is in RSA3?
regards,
manhi,
Check out the following
1.Check the report at the detailed level(line item level)
2.Check if the report is from multiprovider, if so chk the field you needed is selceted from all the cubes you require.
3.Run a full repair and chk upto PSA.
Hope it helps you
Assign points if so
Ramesh -
Data is not getting displayed in the report from an Infoset.
Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.RaoHi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao. -
Quantity fields not getting displayed in the second total row
Hi,
As per the requirement I have to display 2 total rows for an ALV report using CL_GUI_ALV_GRID. I am able to get the first total row properly using method get_subtotal(). However for the next total row only the character fields are getting displayed and the quantity fields are coming blank.
The second total row will have different values based on a formula.
Please help me out in resolving the issue.
Thanks,
AbhishekYou can provide first row as the SUBTOTAL and next row as the TOTAL.
Get one extra column on which you can do the SUBTOTAL.
Regards,
Naimesh Patel -
How can i display all the Coloumns (Key Figures) in the Report's same page
Hi All,
I am currently working on the BI 7.0 reporting. In the BEx Query Designer report, I am having 13 coloumns (7 Key figures and 6 Formulas) in the report. It is now displaying 10 coloumns in the First page of report. The other 3 coloumns can be seen by clicking on the next page. But the requirement is to see coloumns in the SAME PAGE.
Are there any settings OR any other thing in the Query Designer, which can enable me to see all the coloumns on SAME page. The users are not interested in scrolling next page for 3 coloumns.
Appreciates the Quick help/Response, please.
Regards
RamanaIn Web Application Designer, for the properties of your analysis webitem under the Paging category, change parameter 'Number of Data Columns Displayed at Once' (BLOCK_COLUMNS_SIZE) to 0. This will make all columns show instead of paginating as it is doing now.
-
How 2 assgin a character value to the auxillary cell
Hi,
I'm assigning a character value to the auxiliary cell in the macro. But it gives me a dump. So do let me know can I assign a character value to the auxiliary cell ( I need to display this value for the alert text).
Thanks,
Siva.Why are you trying to use a character in the planning book - why not a representative value in numbers
but if you HAVE to use characteristic then you can also try to use the notes functionality (right click on a cell and go to notes if you have not seen this )
These notes are usually anchored to a cell. These notes are stored in a table (check in se 16 with wildcard on notes ) and is associated to the value of a cell
So if you can reference a cell value and put in the conditons to the values on it you might be able to manipulate the values in the table for notes and this will cause the notes in the interactive planning boo to change accoring to the value of the cell -
Text not displayed in the Web Report
Hi All,
I have a query where user is expecting both Key and Text to displayed in the report for the Info object "Local Product High". This infoobject has text data available. But Iam not sure why this is not getting displayed even when I select both Key and Text in the properties screen.Only Key is getting displayed.
Can some one throw some light on this.
Regards,
SrinivasI juct checked the Text table and I see the texts for the infoobject exists. I do not think CHange run will resolve this issue. but yes the master data is active .
I will now try to run the report through Bex and come back.
Thanks for the input..
regards,
Srinivas -
Chinese characters are not displayed in the Firefox bookmarks
Chinese characters are not displayed in the Firefox bookmarks. The name looks like e.g. "??????? ???? cn.nytimes.com"
Chinese character of the site name is displayed ok in the head of the browser window and there is no problem reading chinese web content. I use Firefox Portable 11 /English from portableapps.com in Windows XP.
I googled and got some tips:
1) Set your browser to recognise Chinese language internet sites.
Windows users: Under "Tools - Options" on your browser's menu-bar add Chinese to the languages list.
- I did this.
2) Set your browser's "Character Set" or "Encoding" to UTF-8 (sometimes also called Universal Alphabet or Unicode).
Encoding settings can be changed under the "View" option in your browser's menu-bar.
- It was already set to UTF-8.
3) Windows users: If Chinese text still does not display correctly, East Asian language support may need to be enabled.
- This has been done when I installed Windows.
I still don't get any Chinese fonts in the bookmark names. I can edit the bookmark name with chinese characters and then save the bookmark, it works fine. But why does not Firefox recognize the characters when saving bookmarks? Help is appreciated.No I didn't change anything deep beneath the hood. My problem didn't apply to the URL, but to the name of the link or bookmark header or whatever you would like to call it. (When hitting Ctrl + D there is a Name field). I only got ???????? instead of chinese characters in the name. Also for e.g. www.cntv.cn ...but maybe all China is not in the whitelist either. ;-) But anyway, this was not the real problem for me.
Apparently I was wrong as after a reboot of the computer it worked. The solution seemed to be to add Chinese to the language list. I don't know why it was not enough to restart Firefox?
Now I only have problems to show chinese characters in the name field of my external link manager... But I guess it is not an issue for Mozilla. -
The length of the password entry field in the BEx Analyser
Hi,
The password is 8 characters in the BW system.
When users changing their newly assigned passwords. When logging into the BEx Analyser, and prompted to change the password, a password entry box is displayed, with an entry field longer then 8 characters. Some users are therefore entering passwords longer then 8 characters. This is fine when they first login, but when they try come back to the system, their logon fails.
Can something be done to restrict the length of the password entry field in the BEx Analyser?
Many Thanks
JonathanHi Jonathan
we are having the same problem - did you find a way to resolve this? I did not find any SAP notes referring to the issue.
Regards
Hayley
Maybe you are looking for
-
How do I fix an Apple mail account that is "confused"
Last week I moved a mail account from one host provider to godaddy. I updated the incoming and outgoing mail servers in Apple Mail and did a "Get Mail". Two new messages came in so it appeared everything was fine, however I realized Mail was not retr
-
Post Install steps for htmldb 1.6.1
I am done with a new installation on RHL - 10g DB install on ORACLE_HOME1 - Standalone 9.0.4 Http Server for the CCD on ORACLE_HOME2 - Install of HTMLDB 1.6.0 and later patch of 1.6.1 error free I am following the post installation steps for configur
-
Optimisation of NN lookup for large roads table
we have a large roads table (approx 2.5M records) for the UK. we have vehicles for which we need to locate the nearest road for approx 1-5k vehicle locations at a time. The roads table has an R-Tree index on it. The roads data is in British National
-
Notifications saying my network is not secure
I have recently received a notification while using the internet saying that my network is no longer secure. I am attaching a screen shot of the notification. I have tried solving the problem by exploring my network and security options in system p
-
Image Deployment to Remote Computers
I know that officially Microsoft doesn't support remote image deployment. I was working for a larger consulting company a few years back. The internal IT staff was working on deploying images to remote laptops of the consultants when a refresh (In-Li