Character  information at the candidate window in the pinyin input system.

While learning writing chinese characters with the pinyin input system at an apple store, I found that at the candidate window, already selected a character, the window showed the pinyin with the tone number, the code, the radical and the components of the character. I have OS X Lion 10.7.1 and Pages ´09 4.1 (923) and can not activate that helpful function. I already went back to the store without results. Does somebody can help me to activate this function? Is it a version related characteristic?. Thanks

PS  Sorry, I gave you the instructions for 10.6.  In 10.7, you have to select Find Input Code in the "flag" under the Pinyin flag.

Similar Messages

  • Error -1074384569; NI-XNET: (Hex 0xBFF63147) The database information on the real-time system has been created with an older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your database to the real-time system.

    Hello
    I have a VeriStand-Project (VSP) created with my Laptop-Host (LTH) which works with my PXI, while
    deploying it from my LTH. Then I have installed the whole NI enviroment for PXI and VeriStand use on a
    industrial PC (iPC). I have tried to deploy my VSP from the iPC to the PXI but the following error
    message arose on my iPC:
    The VeriStand Gateway encountered an error while deploying the System Definition file.
    Details: Error -1074384569 occurred at Project Window.lvlibroject Window.vi >> Project
    Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
    Possible reason(s):
    NI-XNET:  (Hex 0xBFF63147) The database information on the real-time system has been created with an
    older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your
    database to the real-time system. ========================= NI VeriStand:  NI VeriStand
    Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI
    VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize
    Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
    * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * • Unloading System
    Definition file... • Connection with target Controller has been lost.
    The software versions of the NI products (MAX/My System/Software) between my LTH and the iPC are
    almost the same. The only differences are:
    1. LabView Run-Time 2009 SP1 (64-bit); is installed on LTH but missing on iPC. The iPC has a 32-bit system.
    2. LabView Run-Time 2012 f3; is installed on LTH but missing on iPC.
    3. NI-DAQmx ADE Support 9.3.5; something strage on the LTH, because normally I am using NI-DAQmx 9.5.5 and all other DAQmx products on my LTH are 9.5.5. That means NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5.. On the iPC side all three products are 9.5.5.. That means NI-DAQmx ADE Support 9.5.5, NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5..
    4. Traditional NI-DAQ 7.4.4; The iPC has this SW installed. On the LTH this SW is missing.
    In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
    1. LabVIEW Real-Time 11.0.1
    2. NI-488.2 RT 3.0.0
    3. NI_CAN 2.7.3
    Unfortunately the above stated problem still arose.
    What can I do to fix this problem?
    I found a hint on http://www.labviewforum.de/Thread-XNET-CAN-die-ersten-Gehversuche.
    There it is written to deploy the dbc file againt.
    If this is a good hint, so how do I deploy a dbc file?
    I would feel very pleased if somebody could help me! :-)
    Best regards
    Lukas Nowak

    Hi Lukas,
    I think the problem is caused by differenet drivers for the CAN communication.
    NI provides two driver for CAN: NI-CAN and NI-XNET.
    NI-CAN is the outdated driver which is not longer used by new hardware. NI replaced the NI-CAN driver with NI-XNET some years ago, which supports CAN, LIN and the FLEXRAY communication protocol.
    You wrote:
    In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
    3. NI_CAN 2.7.3
    NI CAN is the outdated driver. I think that you should try to install NI-XNET instead of NI-CAN on your PXI-System, to get rid of the error message.
    Regards, stephan

  • In my utility program i get information, that the SUID file "System/Library/Core...Agent" became a change and is not to fix. What say me this and is it a problem?

    in my utility program i get information, that the SUID file "System/Library/Core...Agent" became a change and is not to fix. What say me this and is it a problem?

    See this
    http://support.apple.com/kb/TS1448?locale=da_DK

  • Getting  the current operating system information through java

    hi ,
    How can i get the information about the current operating system on which i am working through the java application.

    System.getProperties() and look through the results. All kinds of interesting stuff in there.

  • Windows 8 installation error: "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files."

    I recently tried testing Server 2012 for installation and I had a major issue.  Windows 8 also uses the same method for installation so this should also apply to Windows 8.  I thought this might be helpful for other people who have the same
    problem.  My setup is a 1U server with no DVD drive, no hard drives, and only USB.  I have a new hard drive that I wanted to install Server onto, so I put it in and ran the installer off a thumb drive.  I kept receiving the following error when
    I tried to format the hard drive and proceed with the installation:
    "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files."
    After hours of troubleshooting, I determined my problem was I was using a thumb drive to install it, and Windows didn't like it.  Some people had similar issues when similar devices were plugged in (i.e. external hard drives, SD cards, CF cards, etc). 
    In my case, it was the installation drive itself was a thumb drive.  I ended up digging up an external DVD drive and placed the installation onto a DVD.  Worked flawlessly.  Now I am up and running.
    I tried
    the steps here to no avail.
    Hope this helps anyone else with the same problems.

    Hi,
    Thanks for sharing. We really appreciate your time and efforts. Hope your experience will help other community members facing similar problems.
    Leo Huang
    TechNet Community Support

  • When I start my Creative cloud desktop app. I get a blank window. I can see the logo at the top but no information in the window.

    when I start my Creative cloud desktop app. I get a blank window. I can see the logo at the top but no information in the window.

    BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
    -and step by step http://forums.adobe.com/thread/1440508?tstart=0
    -and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

  • Not sure what happened, but now, whenever I open a new tab, a new window also opens containing the same information as the tab.

    Don't know what I did, but now, whenever I open a tab, the tab opens as it should, but it ALSO opens a new window with the same information that my original window had. (same tabs, etc.) Pretty much a duplicate of my original window. I've looked everywhere for a solution, but can't find one.

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state '''while saving your essential information.'''
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Apply character formats in the Marker window

    We need the ability to apply character formats (including superscript and subscript) in the Marker window. I use this feature to generate LOM files, which are greatly helpful, but after generation, I must edit the file directly to apply character tags to individual items to correspond with the style of the text from which the markers have been generated.
    For example, I have a list of warnings at the beginning of my book. I place a marker in each warning in the chapters to generate the list of markers. Some of the warnings in the chapters contain the product name which includes an Italic character and a superscript registration character. (The client's style is to use the registration character at every instance.) When I place the text in the Marker window, I have no way to include the character formats for Italics and superscript. Therefore, when the list of warnings is generated, the product name is not styled correctly, and I must edit every instance in that file--every time I generate for a revision.
    If the Marker window would accept character format codes like the Variable window does, the problem would be solved.

    I've never done a LOM, but if you are pulling across text at the marker, and LOMs work like TOCs, try the following.
    Apply a Character format to the source text with the attributes you need.
    Make sure that format also exists in the Character Catalog of the LOM file.
    In the case of TOCs, this causes the TOC lines to use that Character format (as defined in the TOC, as long as the format name is the exactly the same).

  • Adding Asset Tag information into the Bios from Windows 7

    Hi
    I am wondering whether there is a utility that will enable me to add Asset tag information into the bios from within windows 7 . We have various models mainly T410 / T420 ' but alos some X201 / X220's
    Firstly is there such a utility ?
    secondly is there one for all ?
    If not is anyone able to suggest how this maybe done . Manual entry at the bios level on thousands of Laptops is just not possible. The end result is for the asset information to be picked up in SCCM and tracked
    Thanks
    Andy 
    Solved!
    Go to Solution.

    Hi AndyG, and welcome to the Lenovo User Community!
    Windows 7/Vista/XP:
    http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-75237
    DOS:
    http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS013515
    Enjoy!
    I don't work for Lenovo. I'm a crazy volunteer!

  • Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.

    Dear Technet,
    Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.
    My cluster suddenly went disappear. and tried to restart the cluster service. When trying to restart service this above mention error comes up.
    even i tried to remove the cluster through power-shell still couldn't happen because of cluster service not running.
    Help me please.. thank you.
    Regards
    Shamil

    Hi,
    Could you confirm which account when you start the cluster service? The Cluster service is a service that requires a domain user account.
    The server cluster Setup program changes the local security policy for this account by granting a set of user rights to the account. Additionally, this account is made a member
    of the local Administrators group.
    If one or more of these user rights are missing, the Cluster service may stop immediately during startup or later, depending on when the Cluster service requires the particular
    user right.
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How can I see the information at the bottom of any window

    In the finder, how can I see the information at the bottom of any window (number of files etc..), like before Lion?

    In finder, show status bar. It's under View.

  • TS1468 Why can't I edit album track information in the INFO window, and more to the next track without having to do each track seperate?

    In iTunes 10, I could edit multiple track information in the (Info) tab and click to move to the next track within that album. Now with iTunes 11.1.3.8, I have to do each track seperate. It will not let me edit track information (as if track numbering), and click next to move to another track within the same album. It's a pain to have to do each song , and then click on the next song I want to edit. My music library is 171 GB (47,185 files & 19,498 folders). I can find the Duplicate files, but I can't edit like I use to in iTunes 10. Any help in this matter would be greatly appreicated!!!!! I will be an old man at the rate I'm going now.

    Either select a single track, Get Info, then use the Next/Previous buttons to move between them, or select multiple tracks, Get Info, and edit common properties. The next and previous buttons do not appear in multi-track Get Info (and never have).
    Regarding duplicates, Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls.
    Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created.  If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin. Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background and please take note of the warning to backup your library before deduping.
    (If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
    tt2

  • How can I put information in the status line at the bottom of the window

    Hi, I need to put some information on the status line, like username and database name. How can I do this?
    If someone know how to do this and could show some sample code, please, put in this.
    Thank you,
    San

    Thanks, but this put a message in the message line, and I need to put this in the status line below the message line, where are displayed messages like "enter query", "execute query", "list of values" and etc...
    Is this possible?
    Thanks

  • There was a problem updating InDesign CC For more information see the specific error below.  Update Failed Download error.  Press Retry to try again or contact customer support.(49)

    Posted the entire text from the error window, when trying to update, using the normal NON-TECHIE way to update any and all Adobe CC products, via the Creative Cloud updater installed when Adobe Creative Cloud subscription was purchased when first offered.
    The following occurs, ad nauseam:
    There was a problem updating InDesign CC
    For more information see the specific error below.
    Update Failed
    Download error.  Press Retry to try again or contact customer support.(49)
    Here's the crux of my frustration:
    (1) Customer Service is NOT contact-able, to receive LIVE help.
    (2) There is NO way for me to mitigate this "Download error", being a student learning InDesign, and NOT in any way capable of tweaking folders/files here and there.
    Therefore, the real question:
    Given that a significant number of subscribers are having the above referenced issue with attempting to download the current update for InDesign, WHAT ARE WE SUPPOSED TO DO, in order to get our contractually paid-for updates to our legally and contractually paid-for Adobe software, specifically in my case, InDesgin's current update?
    Please, NO TECHNICAL mumbo-jumbo which most likely will cause the overwhelming majority of users, like me, to seriously corrupt their computer files, but rather an honest, straightforward "what to do" from real CS/Engineers working for Adobe, as to how to FIX this issue, period.
    ===========================================================
    UPDATE:
    Here is a way in which I think I was able to "update" my InDesign CC application:
    (1) Sign-In to your Adobe Account
    https://www.adobe.com/
    (2) Click on the MENU icon
    (3) Click on the product InDesign icon
    Your browser should display the page for Adobe InDesign CC
    https://www.adobe.com/products/indesign.html?promoid=KLXLU
    (4) Click on the Download icon,
    Your browser should now display the page to download InDesign,
    https://creative.adobe.com/products/download/indesign
    (5) a Pop-Up window should open, and display:
      Launch Application
      This link needs to be opened with an application.
    with the first option to select being the CreativeCloud(URIHandler)
    (5) Select this application and click OK.
    What happened when I followed steps (1) thorugh (5) is that:
    (a) InDesign CC(2014) was installed,
    (b) InDesign CC, updated, and then
    (c) InDesign CC(2014), also updated.
    Why this all worked, is a mystery to me.
    Looks like a separate, "new" version of InDesign, InDesign CC(2014), was installed, the existing "old" InDesign was updated, and then the newly installed Indesign CC(2014) was further updated.
    A BIT MORE, when I launched my InDesign CC app, and checked to see if there were Updates Available, there in fact was an Adobe InDesign CC 64 bit (9.2.2) update.
    I clicked on UPDATE and my "old" InDesign CC app was "successfully updated."
    FURTHER INFO:  I may have neglected to list some important info ... OS:  Windows 8.1 Pro with Media Center, 64-bit
    Confused, I am able to launch BOTH of these apps, and hopefully I may use one of these versions of the InDesign CC app, to do some InDesign work.
    Will keep y'all posted!
    Message was edited by: Richard Yapkowitz, about an hour after I first posted this issue.

    Jackdan error 49 indicates the installer was unable to access a critical file or directory.  You can find additional details at Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

  • ITunes settings reset with every new version, and I get: "...the information on the iphone is synced with another user account"

    Windows 7 64-bit with MS Outlook 2010. I've seen this now probably 10 times. When I first installed iTunes, I selected:
    Preferences -> Devices -> "Prevent iPhonse, iPhones and iPads from syncing automatically".
    and on my iPhone, I selected:
    Info -> Sync Contacts with: Outlook.
    Info -> Sync Calendars with: Outlook
    Info -> Other -> Sync notes with: Outlook
    This works great, and the settings stick.  As soon as apple releases any new version (even minor) of iTunes and I install, I immediately receive: "...the information on the iphone is synced with another user account", and have to merge my calendar and contacts, but then once I get into iTunes, I find that ALL of the above settings (prevent syncing, sync calendar, contacts, notes) get reset and are turned off! I am running as a user account with Admin privaleges, but I don't right-click -> "Run as administrator" when I perform the iTunes update.
    To reiterate, once I change the settings back, things work normally until the next iTunes update at which it gives me that sync error, and resets my sync options.
    Any idea? Thanks!
    -Brian

    Is someone else using the PC and iTunes?
    Create another user for the PC with your name, and try syncing that way.
    This way it wont conflic with the other user.

Maybe you are looking for