Character is not showing in the report.

Hai All,
I have enhanced the data source with the new field and assigned that to dimension in the cube. I don't see the new character in the report to make it as free character. Any help in this regard is appreciated.
Thanks.
VP.

Not sure if this helps, but if your query is based of a multi provider, then make sure you are identifying the newly added field in the indentification section of the characteristics in MP.
Else, go to RSRT -> Environment -> Generate queries directly -> give the infocube name -> press F8.
Then logout of BEx and try after re-logging.
Good luck!

Similar Messages

SPM 5.2 - problem with reason/activity fields - not showing in the report

Dear experts,
I have a situation that is hard to describe.
We have SPM 5.2 - all set and working, now the problem is that for some of the FF sessions the tool is either not reporting the reason/activity fields (due to some technical problem that is occuring randomly) or the users have found a way to abuse the fields and make thier way around them. (these fields are very important for our SOX controls)
I have created test users to see how they are entering without filling the reason/activity fields, but no luck - i couldnt enter.
As you know the Activity field is mandatory text field and at least one character must be entered, but I don`t think this is the workaround, because even if you put space the report still will show it. I have examples where the report is not showing anything.
The worst is that I can`t simulate such cases.
Have you ever heard of such nosense?
Thank you,
Iliya

I think I found it - Application deficiency. It is the language that you are logged with. If it is not English the application is not recording the text that you type in the reason/activity fields upon FF session.
I hope the latest patches are fixing this!
BR
Iliya

Open request not showing in the report

Hi,
We have built a query for planning to show open request. After 50,000 records, the request would be closed in the infoprovider. In the query, Request id is restricted with the most current data variable.
In Dev, the report shows the open request. But, in production, the report doesn't show the open request. When the Query properties are compared, the difference is the Statistics level is 0 in Dev and 1 in Production.
Is this an issue? If not, what could be the issue?
Thanks.

From OSS note 411725 :
In all queries, which display data from transactional InfoCubes, characteristic 0REQUID must be included in the filter and variable 0S_RQMRC 'Most current data' must be used. This variable is part of the Business Content.This is required so that the system also includes the data records from open requests.
use this SAP EXIT variable in glbal filter. 0S_RQTRA (Most Current Data (Transactional InfoCube))..try
regards,..

Images not showing in the report

Version: Crystal Reports XI
Hi,
Currently I have a report that has images from the database (blob) , logo, and images that I inserted in the report. The report is being called by a jsp page. Our crystal server is installed in unix server.
When we try to run the report thru our web interface...... the report runs but the images are not showing. it only shows like x image in it.....
Don't have any idea how to resolve this....... please help

If you are using Web Service to access Reports through BOXI server, then as per documentation you need to call getImage of ReportEngine with callback handler after you call getDocumentInformation.
Refer to the developer's guide -
http://devlibrary.businessobjects.com/BusinessObjectsXIR2/en/devsuite.htm#en/WS_SDK/wssdk_consumer/doc/wssdk_dg/DevelopingConsumerWebApps18.html

Stats from the Intel AppUp Center Are Not Showing in the Reports

I have tons of downloads and purchases for my app, and it is listed on both the Adobe Marketplace and the Intel AppUp center. The reports show what I assume to be accurate numbers for the Marketplace, but show 0's for all Intell AppUp stats.
I have twice purchased my app from the Intel AppUp store and have given it 1 week to show up, but nothing is there. Is there something wrong with the reporting mechanism for AppUp?

Currently the download numbers from Intel AppUp are not getting displayed on InMarket Portal. We are working on the fix, I will update you as soon as the fix is applied.

Variable based on calender dashboard prompt does not show in the report

hello,
i have at the dashboard a calender prompt for a column of date format and a pres variable for that value ('DAY'); i placed in the report a column of which content (fx) is @{DAY};
when i run the report the value of my variable is 0 instead of chosen calender day; the report gets filtered on the day, however only if data.day='@{DAY}; if i choose '<' or '>' it still filters on this one day; why is this happening and how can i work around?

ok, found that
http://108obiee.blogspot.com/2009/03/how-to-change-date-format-mask-in-date.html
seems that this answers the questions

The report I published on the SQL server report server is not showing in the application we use to retrieve reports.

The report I published on the SQL server report server is not showing in the application we use to retrieve reports. My cell phone number is {removed}
Thanks.

Hello Roger Tenn,
Thank you for posting in the TechNet Forum.
As this issue is related to SQL server report server, to receive better report, it is recommended to ask in the SQL server forum.
https://social.technet.microsoft.com/Forums/en-US/home?category=sqlserver
The professionals here will be glad to help you.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

BI publisher report is not showing all the data

Hi All,
I have created a report using BI Publisher in R12. The report is not showing all the records.
I have checked the result XML it is also not having all the data. My query returns 846 rows but my report only has 662 rows.
what might be the issue.please give me some idea to resolve this issue.
Thanks in advance.
Regards,
P.Kalidoss

Hi Arun,
In the following code: public SelectItem[] getAllPrinters() {
if (allPrinters == null) { // allPrinters is not defined. what type of object it is
PrintService[] printers = PrintServiceLookup.lookupPrintServices(null, null);
allPrinters = new SelectItem[printers.length];
for (int i = 0; i < printers.length; i++) {
SelectItem printer =
new SelectItem(printers.getName(), printers[i].getName());
allPrinters[i] = printer;
return allPrinters;;;
Variable allPrinters is not defined. what type of object it is?
And also the same variable is referenced here <af:selectOneChoice label="Available Printers" partialTriggers="cb1"
value="#{pageFlowScope.applicationPrinterBean.selectedPrinter}"
id="soc1"
autoSubmit="true">
<f:selectItems value="#{pageFlowScope.applicationPrinterBean.allPrinters}" id="si1"/>
</af:selectOneChoice>.
Thanks.

Designed Reports are not showing in the Analysis Report List

Hello Master's,
I have designed one report as per our client requirement, and assigned also, but its not showing in the analysis reports list.May i know what setting needs be done to appear in the reports list?.
How to create and add the characteristics(New Fields) in the reports, here we can able to create and add the key figures.
Kindly update the solutions with steps.
For you reference please find the below screen shot.
Thanks in Advance......!
Kind Regards
Shankarappa H L

Hi Shankarappa,
The Analysis -> Reports shows a list of views. Hence, once you create a report you need to complete two mandatory steps.
1. Create a View
2. Assign Report
For more information, please refer to the following link: In conversation with Sebastine Augustine, product manager redefining Business Analysis that forms an integral part of th…
Thanks,
Sebastine

I Published a report on the report server but it's not showing in the internal application we use to access reports

Hi,
I Published a report on the report server but it's not showing in the internal application we use to access reports. The name of the application we use is called MAMA and this application has access to all the reports on the SQL report server. My email is
[email protected] my cell phone number is 201-888-7952.
Thanks.

Hi Roger,
Based on my understanding, you publish a report on the report server. When you access reports with internal application, the report doesn’t display, right?
In your scenario, since you mentioned you have published the report to report server, please go to report manager, check if you can see the published report and open the report properly. If the published report is displayed on report manager, it should not
be the issue in Reporting Services. In this scenario, since the MAMA application has established connection with on report server, it may not update items on report server after you publish your report onto report server. So please try to “refresh” in MAMA
or reconnect the report server. If issue persists, I suggest you contact the MAMA application vendor to get some more effective advices.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

Doc number not showing in the monthly cah journal report

Dear Experts,
When I was printing the monthly report for cash journal, the document number ranges are not showing in the cash journal report
Kindly help me on this
Regards
venkataswamy

Hai Venkat
Which transaction code you are using ?
Use this T code S_ALR_87012309 - Print cash journal.

Lead time values are not appearing in the report for current year.

Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.

Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman

ALV not showing all the rows! Please help!

Hi Experts,
     I have webdynpro ALV report and I am using SALV_WD_TABLE as the reusable component. In component controller's WDDOINIT I have written the code for pulling teh data from R/3 table and binding it to ALV table.
In the view's WDDOMODIFYVIEW event I have written the following code to get subtotal and grand total of Qty column based on product column.
      I have coded like this:
      lr_field_settings ?= l_value.
lr_field = lr_field_settings->get_field( 'PRODUCT' ).
lr_field->if_salv_wd_sort~set_group_aggregation_allowed( ABAP_TRUE ).
lr_field->if_salv_wd_sort~create_sort_rule( ).
l_sortrule = lr_field->if_salv_wd_sort~GET_SORT_RULE( ).
l_sortrule->set_sort_order( if_salv_wd_c_sort=>sort_order_ascending ).
l_sortrule->set_group_aggregation( ABAP_TRUE ).
*...Aggregate Field PRODUCT
lr_field = lr_field_settings->get_field( 'QTY' ).
lr_field->if_salv_wd_aggr~create_aggr_rule( ).
lr_aggr_rule = lr_field->if_salv_wd_aggr~get_aggr_rule( ).
lr_aggr_rule->set_aggregation_type( if_salv_wd_c_aggregation=>aggrtype_total ).
It is working now but my ALV table is not showing all the rows. I have 6 products and it is showing from product 2. But it is calculating grand total and subtotal correctly. I am not able to see the first product row and subtotal for that. Even if I click on the ^ icon in the ALV table below it is not showing all the rows.
What could be the problem?
Please help
Thanks
Gopal

did you somehow manage to set the "first visible row" property on table object
to 2.   Only thing I can think of that could cause this effect.
Cheers
Phil

My Online number is not showing to the phone I am ...

When I am calling to any other phone using skype, my online number is not showing in the CLI of that phone.
But When I call to my Online number, I can receive calls in my skype.
This is happening after I extended my Online number.

nilaydiya wrote:
When I am calling to any other phone using skype, my online number is not showing in the CLI of that phone.
But When I call to my Online number, I can receive calls in my skype.
This is happening after I extended my Online number.
It is possible that the Caller ID settings got wiped out when you extended your Online Number. This is, unfortunately, something other users have reported. I'm sorry it happened to you.
To reset your Caller ID settings, log into your Skype account here on the Skype web site. Use the "Account" link at the top of this page, and enter your Skype name and password. Then you can access your Caller ID settings, and select your Online Number to - once again - be your Caller ID.
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Data Migration Opening Balances are not updating in the Report F.08

Hi,
We have uploaded the GL balances in 2008 for the year 2007. But they are not updating in the F.08 report when i executed for 2008.
Why they are not updating in the report. In which table can i check the Data migration values in the system?
Thansk
Kishore

Hi We have uploaded all the values in 2008 with 2008 date. fiscal year is K4.
F.08 Report for the year 2008 is showing only 2008 accumulated values. But not showing the Opening balances which we have uploaded in 2008 for the before years like 2007.
Why it is showing like that?
Thansk
kishore

Character is not showing in the report.

Similar Messages

Maybe you are looking for