Character mapping issues with Illustrator ME

Hi,
I have Creative Suite CS3 Middle Eastern version, and I'm having trouble using English numerals in Illustrator. When I try to type numerals, they show up as other characters (accents for Arabic, maybe?). I've tried inserting them through the Glyphs palate as well, but in regular fonts the same problem occurs and in fonts with alternate characters I can insert numbers by clicking on one of the alternates... but they appear in right-to-left order. I'm only interested in using English in Illustrator... any idea how to fix these issues or at least work around them?
Best,
Gabe

Typing numbers in InDesign or other ME products can be done easily...
In TYPE character palette, see DIGITS, then select Arabic for English numerals, Farsi for Persian numerals and Hindi for Arabic numerals.
Select Arabic LANGUAGE and Arabic font in character palette for typing Arabic numbers. Switch to English LANGUAGE (and Arabic digits) for 1, 2 3, 4...
I think we have information on this posted at http://www.fontworld.com

Similar Messages

Issue with Illustrator CS6 - can't get it to run

Since a couple of weeks ago, I have an issue with Illustrator CS6 - can't get it to run When starting the application I get the following error:
"The procedure entry point ?AcquireVarient@ImageInterface@drawbot@dvaui@@QBE?BV?$intrusive_ptr@UImageInterface@drawb ot@dvaui@@@boost@@V?$rational@J@5@@Z could not be located in the dynamic link library D:\Program Files\Contents\Windows\Illustrator.exe."
I'm running it on Windows 8 (x64). I have multiple other Adobe applications installed, which are running fine. I've tried solving the issue with reinstalling Illustrator - multiple times. My GPU driver is updated to the latest version.

I have this issue as well on my Mac and called tech support 4 times and they can't fix it. Adobe has really gone down hill in a short amount of time!!
Only thing that worked (as a temporary fix) is to create a new user and toggle back and forth between two users which is very annoying. Adobe has tried uninstalling, reinstalling, taking over my computer remotely, trashing plugins, verifying permissions but the fact remains that we bought CS6 four weeks ago and Illustrator doesn't work.
I'm going on Facebook to let others know.....don't buy Adobe, it doesn't work and they don't know how to fix.

Having issues with Illustrator files in CS5

I recently uninstalled CS4, needing the memory space. Now I am having issues with Illustrator CS5. When I go to open the program, i am receiving this error message: "Adobe Illustrator has detected a problem with the windows registry which needs to be corrected for Illustrator to work properly. Would you like Illustrator to correct the problem now?" so i click "yes" and the program opens, but then when i go to open a file, the AI icon doesnt show up on any of the files, it takes forecer to open, if it even opens the file - sometime i get the message "cannot recognize file type".

Your install never finished properly. Run the Creative Suite Cleaner Tool, reinstall all your Adobe software from scratch with proper admin privileges and security tools turned off to prevent interference.
Mylenium

Issues with illustrator 10 and windows 8

any known issues with illustrator 10 and windows 8...version worked fine on windows xp....new computer with windows 8....now cannot seem to operate. Loads, and shows access but will NOT start up. help ! thanx ttp74

AI 10 is now 10 years or so old and was never tested on nor designed for Win 7 or Win 8. You should simply assume it's not compatible and will never run properly. feel free to spend your time with the compatibility modes and al lsorts of hacking with the security stuff and otehr settings, but to be honest, it will probably be a waste of time.
Mylenium

Graphical mapping issue with useOneAsMany if segment does not exist

Hi all
I have an issue with graphical mapping in an IDoc to file scenario. I need to have header level fields mapped to line item fields. Whether or not and how many source header segments of the same type exist depends on a qualifier (QUALF). This is generally working if I use the following graphical mapping:
if QUALF = 001 then <source> -> removeContext -> useOneAsMany -> splitByValue -> <target>
... with setting QUALF, <source>, and the second input for the useOneAsMany to the highest possible context node.
Nevertheless, if the segment with the qualifier 001 does not exist in the source then the mapping throws the error "Too few values in first queue in fuction useOneAsMany". Whatever I've tried, the mapping wants to execute the useOneAsMany statement anyway and I haven't found a way to omit this. Whether the target would be created with an empty value or not created at all would be secondary. Would eventually somebody have a solution to this problem?
Thanks in advance,
Daniel

Daniel,
try using mapWithDefault function before useAsmany
if QUALF = 001 then <source> -> removeContext -> MapwithDefault->useOneAsMany -> splitByValue -> <target>
I think it takes care even if the value occur in the contaxt or.
Babu

Mapping Issue with UDF

I am in the middle of doing a webservice call from within a UDF.
The problem is that when I am declaring my message part of the definition is a url. So I am trying to declare a string like the following:
String m = "<?xml version="1.0" encoding="UTF-8"?><msgType xmlns:ns0=http://www.webservice.com ......
Now my problem is with the
xmlns:ns0=http://www.webservice.com
// is a comment in java so everything after this is being seen as a comment how do I solve this issue?
I had the same issue with "
"<?xml version="1.0" encoding="UTF-8"?>
but I solved it using \ like the following:
"<?xml version=\"1.0\" encoding=\"UTF-8\"?>
The problem is this is working for the //

Hi Alex,
I had a scenario like this in the past.
In most cases you call Services for Lookups.
In such a Case use the
Com.sap.aii.mapping.lookup.api and use the accessor and the lookup services for the same.
In such a case the Communication Channel can store the web addresses and XML,
you just need to
1. Create a Channel object based on the channel
2. Derive a accessor out of it
3. Use the accessor to Bulid your payload
4. parse your payload.
[https://help.sap.com/javadocs/pi/SP3/xpi/index.html]
let me know if this was helpful and do reward points
regards,
Abhishek

Mapping issue with context again

I again need help with a mapping issue. I dont know how to handle the contexts to get this working in the xi graphical mapping tool. I have previously logged a question regarding this structure but the requirements have now changed.
I have a source document that has multiple delivery line items and for each delivery line item, there are multiple handling units. Each handling unit contains the line number of the delivery line item it belongs to. This structure has been simplified below.
Source Sample
<DOCUMENT>
<DELIVERY_LINEITEM>
<LINENUMBER>10</LINENUMBER>
<MATERIAL>mat 1</MATERIAL>
</DELIVERY_LINEITEM >
<DELIVERY_LINEITEM >
<LINENUMBER>20</LINENUMBER>
<MATERIAL>mat 2</MATERIAL>
</DELIVERY_LINEITEM >
<HANDLING_UNITS>
<HU_LABEL>123</HU_LABEL>
<HU_ITEM>
<LINENUMBER>10</LINENUMBER>
</HU_ITEM>
</HANDLING_UNITS>
<HANDLING_UNITS>
<HU_LABEL>456</HU_LABEL>
<HU_ITEM>
<LINENUMBER>10</LINENUMBER>
</HU_ITEM>
</HANDLING_UNITS>
<HANDLING_UNITS>
<HU_LABEL>789</HU_LABEL>
<HU_ITEM>
<LINENUMBER>20</LINENUMBER>
</HU_ITEM>
</HANDLING_UNITS>
</DOCUMENT>
Source Structure
DOCUMENT 1..1
DELIVERY_LINEITEM 1..unbounded
LINENUMBER 1..1
MATERIAL 1..1
HANDLING_UNITS 1..unbounded
HU_LABEL 1..1
HU_ITEM 1..1
LINENUMBER 1..1
In the target structure, I need to output each handling unit along with the corresponding DELIVERY_LINEITEM material. Target structure has been simplified below:
Target Sample
<DOCUMENT>
<ROW>
<PACKAGING>
<HU_LABEL>123</HU_LABEL>
</PACKAGING>
<PACKAGING_ITEM>
<LINENUMBER>10</LINENUMBER>
<MATERIAL>mat 1</MATERIAL>
</PACKAGING_ITEM>
</ROW>
<ROW>
<PACKAGING>
<HU_LABEL>456</HU_LABEL>
</PACKAGING>
<PACKAGING_ITEM>
<LINENUMBER>10</LINENUMBER>
<MATERIAL>mat 1</MATERIAL>
</PACKAGING_ITEM>
</ROW>
<ROW>
<PACKAGING>
<HU_LABEL>789</HU_LABEL>
</PACKAGING>
<PACKAGING_ITEM>
<LINENUMBER>20</LINENUMBER>
<MATERIAL>mat 2</MATERIAL>
</PACKAGING_ITEM>
</ROW>
</DOCUMENT>
Target Structure
DOCUMENT 1..1
ROW 1..unbounded
PACKAGING 1...1
HU_LABEL 1..1
PACKAGING_ITEM 1..1
LINENUMBER 1..1
MATERIAL 1..1
Note, 1 ROW in the target structure = 1 HANDLING_UNITS from the source structure.
Can anyone help me to achieve this? I do not know how to map the relevant DELIVERY_LINEITEM\MATERIAL from the source structure to the target structure.

JM,
Please find the solution. Reply back if it helps or not
http://www.flickr.com/photo_zoom.gne?id=1045178998&size=o
http://www.flickr.com/photo_zoom.gne?id=1045179010&size=o
http://www.flickr.com/photo_zoom.gne?id=1045179022&size=o
Results :http://www.flickr.com/photo_zoom.gne?id=1045179134&size=o
Code used:
for(int j=0;j<Handling_Linenum.length;j++)
for(int k=0;k<Delivery_Linenum.length;k++)
if(Handling_Linenum[j].equals(Delivery_Linenum[k]))
result.addValue(""Material[k]"");
result.addContextChange();
Best regards,
raj.

Issue with Illustrator Pathfinder Divide tool

Having a strange issue I've never encountered before with the divide tool in Illustrator. I use this all the time and it's never caused me any issues until I upgraded to CS6.
I've uploaded a video of the problem I'm encountering here: http://www.youtube.com/watch?v=OO07SXVGeOw&feature=youtu.be
What I would like to do, and have done before, is to simply divid a shape using the path of a line. It should divide the shape right along the line path resulting in two shapes that are grouped together without the anchorpoints moving and changing the shape size. What's happening now when I do it is that the main shape changes form when divided and the achorpoints are moving around, resulting in two shapes that really don't 'fit' back together without tweaking the achorpoints. I mine as well create two seperate shapes and eyeball where the achorpoints should match.
In the video I just showed you what one line is doing. When I do them all it's an absolute mess. I've done this before many times and it's always worked out perfectly—not sure what is going on. I initially though I could of had 'snap to point' or 'snap to grid on' which would cause the anchor points to shift after being divided. All those options are turned off and it's still doing it.
Has anyone encountering this issue or know why it may be happening? I've tried restarting my computer to see if it was just being glitchy, but the same issue keep happening.
Thank you!

I know this string is out of date, but I started having the same issue after upgrading to CS6. I unchecked the "Align to Pixel Grid" box in the Pathfinder palette, and changed the document color mode from RGB to CMYK... I even created a new document and was still having issues. After repeating this process a couple of times, thinking I was doing everything right, HERE'S where I found the issue..
When creating a new document, make sure you click on "Advanced" options in the "New Document" box...
Make sure your Color Mode is CMYK (mine was RGB... and that's why that little yellow warning is there)
Select what every PPI you need
and UNCHECK the "Align New Objects to Pixel Grid" (this is the IMPORTANT part... you can't get to it AFTER you click "OK")
Now you're ready and won't have those irritating issues with Pathfinder! Yeeesh!

Updating to Mavericks issues with Illustrator, Photoshop and Dreamweaver

Since updating to Mavericks I am having problems with Illustrator, Photoshop and Dreamweaver opening files on Parallels VM and network servers. Will updating Java to 7 help? Everything worked before upgrade. Photoshop say files are empty, in Dreamweaver the document is blank and Illustrator crashes. If I open the files off my local machine everything works fine.

Go to each program forum, in OVERVIEW mode
Then, in the area just under Ask a Question, type in
maverick
or
mavericks
or
10.9
You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question

Update Issue with Illustrator 9.0

"Working with Illustrator 9.0 and would like to update to 9.0.2. Illustrator was installed to my secondary E drive. I realize that I must update to 9.0.1 first. The download allows me to browse for a location but E drive only shows folders for GoLive, Live Motion and PhotShop 7. Took a chance on the default location and traced it to the 9.0.1 setup file. The update pointed to e:\help then generated the message: error updating ACE.DLL has failed... return value is 38. This part is over my head. Seeking guidance

CONTINUES...
What is the problem? Something with the ClassLoader of Tomcat 4.1?
I will try with Tomcat 4.0 and post this thread to tomcat-users mailing list!
bye,
Marco.

Issue with Illustrator CC, please help

Hi everyone,
I've been experiencing something weird in Illustrator CC for a while now. It became unusable.
What I've done :
Reinstall Illustrator CC
Remove Preferences in the /Users/ folder
Remove all files with the Adobe Cleaner Tool
Reset PRAM
Manually remove all traces in /Applications/
Screen capture of issue - https://vimeo.com/107747080
Cmd+Q doesn't work, shortcuts don't work either. Cannot use it.
I'm a graphic designer, so it's pretty important I can use this, this is going nowhere.
Any idea of what I could do?
Thanks

Hello,
It's not really a shortcut issue, but really the way everything's rendered in the canvas. Yeah, ok, cmd+Q doesn't work though (as for other shortcuts too). I can select, but everything stays selected, I can drag & drop elements, but they stay selected unless I select something else. I've searched many discussion forums, and nothing seam to help.
OS X 10.9.4

Color Management issues with Illustrator

Can someone help me figure out the color management issues I'm getting when printing on an Epson 3880 from Illustrator?
The image comes out severely red as evident on the face. I'm not getting the same problem when printing from Photoshop, even though I set same paper profile in printing dialog box.
I attached two printed picture (one from Photoshop CC, and one from Illustrator CC) that I took with my iphone so that you can see the printed result. Even when I try to simulate same thing using illustrator soft proofing process, the soft proof does not show me anything close to how it gets printed out. And I tried all device simulations to see if any would match it. Im using CMYK SWOP v2 for Color space in both programs.

Dougfly,
Only an hour wasted? Lucky you. Color is an incredibly complex subject. First, forget matching anything to the small LCD on the back of your camera. That's there as a basic guide and is affected by the internal jpg algorithm of your camera.
2nd, you're not really takeing a color photo with your digital camera, but three separate B&W images in a mosaic pattern, exposed thru separate red, green and blue filters. Actual color doesn't happen until that matrix is demosaiced in either your raw converter, or the in-camera processor (which relies heavily on camera settings, saturation, contrast, mode, etc.)
Having said the above, you can still get very good, predictable results in your workflow. I have a few color management articles on my website that you might find very helpful. Check out the Introduction to Color Management and Monitor and Printer Profiling. In my opinion, a monitor calibration device is the minimum entry fee if you want decent color.
http://www.dinagraphics.com/color_management.php
Lou

Message Mapping Issue with data without namespace

Hi,
I have a common xsd imported which has its own target namespace into my SWC namespace. Based on this xsd I have generated a Message Interface and webservice and given the wsdl to third party system for invoking my webservice.
The problem is I have done the message mapping based on xsd which has namespace but whereas the third party system which is consuming my webservice is sending the xml data without any namespace and because of which my mapping is failing (target structure is not getting generated as expected). I have tested the mapping with namespace and without namespace from IR already. I have explained this below with example.
I cannot change the xsd as it is a common and even cannot ask the end system to change the data format they are sending as they are sending the same data to some other systems also, which are not complaining.
How to resolve this issue in XI?
Actual xml data generated from my imported xsd (with namespace)
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Root xmlns:ns0="http://employee/types">
 <ns0:EmployeeDetails>
 <ns0:EmployeeId>12</ns0:EmployeeId>
 <ns0:EmployeeName>XYZ</ns0:EmployeeName>
</ns0:EmployeeDetails>
</ns0:Root>
Actual Data coming from third party system (without namespace)
<?xml version="1.0" encoding="UTF-8"?>
<Root>
 <EmployeeDetails>
 <EmployeeId>12</EmployeeId>
 <EmployeeName>XYZ</EmployeeName>
</EmployeeDetails>
</Root>
Thanks
Amit

Just wild guess:)
I am not 100% sure but i guess XSLT mapping does not checks the incoming payload against the sender message type.Within XSLT mapping you can add/remove namespace as you would like,use this XSLT mapping before your actual message mapping in interface mapping.
I am saying this coz recently i was able to generate XSLT mapping(in altova Map Transform) without even specifying any sender or receiver Message type and it worked just fine.
Thanx
Aamir

Mapping issue with Qualifier table

Hi,
1. I have an issue after mapping all 3 non-qual flds of a qualifier table in main table getting the compound fld enabled but selecting it , not mapping automatically to the appropiate compound field in the destination side, but giving an error message
"unable to retrieve source record".
2. The second issue is that after mapping some of the fields and qualified table and loading the maintable data, saving the map but subsequently when trying to open the saved map , it is coming out with the usual main error window
SAP MDM Import Manager
SAP Import manager has encountered a problem and needs to close.
We are sorry for the inconvenience.
Debug Close
Appreciate your help/suggestion on this issues.
regards
-reo

Answer for Qn2:
First you have to map all the display fields to individual Source Fields..
Once you have mapped all the dispaly fields of the Qualified Table, you have to do value mapping for the Fields that require Value Mapping.
Ex: Source Field A -> Destination Display Field 1
Source Field B -> Destination Display Field 2
Source Field C -> Destination Display Field 3
Now Value Mapping where required should be done.
Once the value mapping is done, then you can create a Compound Field.
If you have done the previous steps correclty, then the compound field name is enabled for you to create Compound Field.
Now map the newly created Compound Field to the Qualified Lookup field of the main table.
Now you have to click on the Automap for value mapping.
Hope this helps.
Please reward if you find this helpful

Printing colour recognition issue with illustrator created design.

I have a macbook pro with retina display and illustrator Cs 6.
For some reason, when I tried to print my illustrator designed work at the professional printing service.
it said there are colour recognition issue. I wasn't sure if that is anything to do with the Illustrator Cs6 or to do with the retina display or the printing service.
I would like to know if anyone have the same issue, and how do you resolve it.
Thanks.

Ahhh,
The colour mode is websafe HEX is the design work by the looks of it and the print is using CMYK mode. Try changing the document's colour mode to CMYK from RGB and see if the blue looks darker. It should do.
Take a look at the image I've attached. I've created both RGB and CMYK variations of the hex colour #0099BA.
I think it's just down to a difference in colour mode between digital version and print. There are some really great comparison sites available that will give you a close conversion if your matching spot and PANTONE® colours too.
Let me know if your any closer to a resolution please. Interested to see what the issue is.

Character mapping issues with Illustrator ME

Similar Messages

Maybe you are looking for