Character mode printing in oracle reports 6i

Hello Experts,
I would like to print my report in character mode.
SO please guide me what all setting i am required to
make before proceeding for printing.
Thanks in advance
AJAY K KHANNA

hey praful I think they are all old threads and
hope they all got there ans as now it has been around more than a year
to these threads so stop answering these and help new ones

Similar Messages

  • 9i report character mode printing under Win2000/Solaris 8i

    i have developed my application in oracle 9i in windows 2000 environment. i want to print the reports in "character mode" on dot matrix printer.
    how to do this ?.
    i have given the runtime paratmeter as
    Set_Report_Object(repid,Report_other,'mode=CHARACTER')
    but it gives an
    error "rep-1920 character mode runtime incompatible with DESFORMAT of PDF,HTML,HTMLCSS,RTF"
    i need to transfer the application into solaris 8i system. if the character mode printing is not available under windows environment is it possible to print the reports in character mode is the reports are in solaris system?

    While u run the report any messages come or not . please specify

  • Character mode printing

    Hi all,
    I am facing the problem with character mode printing. I can see the output on the screen without wrapping. But in the print it will be wrapped. As per the replies in the forum, I changed the desformat to wide, but it increased the width a little but still wraps a portion of it. I also tried desformat=wide180 still it is the same. I also changed the orientation to landscape and still it is the same.
    These reports are running fine in unix based reports 2.5 character mode. But in windows, I face this problem.
    If anybody knows the solution, please advise as soon as possible.
    Thanks & Regards.
    Padma S Bhat
    [email protected]

    hi,
    At design time use fontsize 12 because that is default.
    In case u are calling a report froma form set the report_object properties like desformat.Also see whether the prn files are existing in the appropriate directory.
    Regards
    Deepak

  • Local Character mode printing ways on pc

    Hi all ,,
    I succeed on printing on line printer on terminal unix from my application server defined on windows ,but now I have this problem which is how to print character mode to local printer on pc , the file generated on the server as file how to print it on character mode printer link to a certain pc
    Best Regards
    Maher Habash

    While u run the report any messages come or not . please specify

  • IPP printing and Oracle Report

    Hi all,
    I got reports error out when using IPP printer. It bursts out REP-177 and REP-713 errors in fact. Could anybody advice how-to use IPP printer with Oracle Report ?

    10g is not support IPP, this implement on 11g Report

  • Character Mode printing in Reports 9i on winXP

    I need to print a pre printed stationary Report in character mode. I am using reports9i. i had made all the basic changes,but it is not working for me.So please let me know the exact solution for this problem.This is very urgent !
    Reagrds
    Manoj Baghel

    While u run the report any messages come or not . please specify

  • Reports 6i - Character Mode Printing

    Hi all,
    I am working on Oracle Reports (6i) and I had to generate the report to a physical file using Forms and Reports 6i. I have been generating the report to Screen and saving the report output to a PDF. But if I select the File int he DesType and give the filename to the DesName as "MyDrive:\ReportOutput" with any extension (.txt, csv, pdf, xml) I could not see the file in the drive sepcified. Whereas when I generate the report from the Report Builder with the same name as the DesName Parameter i could see the report. I hope it to be a configuration issue. Can anyone help me in this regard. And one more thing, If I got the file with extension as ".PDF" I could not open the file as such. But if text or csv then i could see the report output.
    Thanks.
    Ravi
    Edited by: user10902305 on Jan 16, 2012 5:00 PM

    Since a solid line is a bitmapped object, the only way you'll be able to get something like that is to run in bitmapped mode. Sorry, but that's pretty much the difference between running in bitmap vs. character mode.
    Hope that helps,
    Toby

  • Urgent... ( Character Mode Printing)

    Hi friends,
    We are using Report 6i. We are facing a problem while printing reports in Character. In win-98 it works fine, but the same report does'nt print propertly in WIN-XP PC. In XP a Blank line are generated after each line.
    Can somebody help us in this regard.
    Sanjay (INDIA)

    Hi,
    First create your .prt file. In this file, you must define the printer escape sequence for making an object print in bold format, for example. Most of the supplied .prt files incorporate this code. An example of a HP printer setting is:
    code "1"          esc"(s7B"
    code "2"          esc"(s0B"
    Check your printer settings and/or consult your printer manual for more information on other effects, such as italic.
    Next build your character mode report.
    The report must now be set to the .prt file. Set the DESFORMAT system parameter for your report to test.prt (no need for .prt extension). This can also be set as a runtime parameter.
    Next, go to the object in the report that you want to print in bold; such as, boilerplate text. Click on the properties for the boilerplate text, and go to the 'Printer Codes' tab. References to the escape codes shown above must be entered here in the Before and After fields. You are interested in the BOLD On and Off printer escape sequences so we would put &1 in the before and &2 in the after field.
    Save and run the report directing the output to a valid printer. The printed version of the character mode report should incorporate your changes.
    NOTE: You do not have to use &1, and so forth, Long postings are being truncated to ~1 kB at this time.

  • Problem with character mode printing on epson lx-300

    Greetings
    I developed a character mode report and is printing fine on the printer lx-300 when I use Reports 6i (Client/Server)
    We migrated all the platform to OAS 10G Release2 bu the same report has the following behaviour:
    1. The left margin is shift to lthe right about 2 inches.
    2. Is printing shrinked and the characters doesn't see well.
    The report is a character mode report of (132 columns, 66 lines).
    I set the default prt to:
    printer "dflt"
    height 66
    width 132
    after page control(L)
    return ""
    linefeed control(J)
    The run parameters are mode=character and desformat=dlft.prt
    Anybody has experience using character mode reports on 10g on matrix printers like epson lx-300?
    Thanks!

    Hi Agung,
    Here is a way out for the issue you have submitted. I can't guarantee that this wayout work perfectly:
    Question:
    As we know that the dos matrix printer supports dos prompt and thus printing speed and
    life of the printing head is comparatively more than what we print the same in graphical format.
    So when I tried to print from SAP Bone in dot matrix printer, the printing speed is very slow and quality of printout is not good enough.
    Any clarifications on this regard would prove very helpful to me.
    Regards,
    xxxxx
    Consultant Business solutions.
    Solution:
    Do you use one of this printer types:
    Dot Matrix, Printer, Needle Printer, Citizen ProDot 300 , Oki Microline, Epson FX880, Epson FX890 ?
    Here the stepwise I have tried :
    In order to print using Dot Matrix printers, follow the below
    instructions:
    1. Run SAP Business One.
    2. Click the upper menu 'File' and select 'Page Setup'.
    3. The Print Setup window opens. Under 'Paper', in the field 'Size', select 'Letter' from the drop down menu.
    4. Click OK to confirm your selection.
    5. On your desktop, click Start => Settings => Printers.
    6. Right click on the required Dot Matrix printer and select 'Printing Preferences...'.
    7. Click the 'Paper/Quality' tab page and click the 'Advanced' pushbutton.
    8. Under'Paper/Output'=> 'Paper Size', click on the underlined paper size(e.g. A4) and select 'Letter' from the drop down menu.
    Note that if you leave the value 'A4', each page will be spreaded over 2 pages when printing using Dot Matrix printers.
    9. Under 'Graphic'=> 'Print Quality', click on the underlined value (e.g. 230X250 dots per inch) and select '120X144 dots per inch' from thedrop down menu.
    Note that in case the value '120X144' is not available you should select a similar value from the list.
    I did not test it yet and I am not so sure about the result but you could test it.
    Rgds,

  • Character Mode printing in XP

    How to print a report in charachter mode in XP. In win 98 m/c it is working properly but on win XP m/c it always print character mode into graphic mode.
    Please help....

    Hi,
    This not a restriction of smartforms. It is possibly a desciption of the deviec type used in SAP. If you use a windows device type like SAPWIN, then graphic mode is always used. If you use a specific device type like e.g. EPESCP9 , then possibly the character mode is used.
    Regards,
    Aidan

  • Printing forms - Oracle Reports in Oracle apps

    Hi
    I am tring to print the Despatch Order, We have a standard form for this purpose . . . I need to print the data into the right columns. . .
    I am using Oracle Reports to pring these forms . . .Is there a standard way to place these items into correct location, to be able to print a neat form.
    Or do I have to got the trial and error way . .. actually I even tried using the scale on the layout model window . .. did not give you nice result . ..
    Regards
    Jagan.

    You may scan the form and use it as report background. Once you will be able to align the backgroupnd with the real form on printing (by iterations, there is no other way), you may use the backgroupnd to position all the field, and then delete the backgroupnd.
    Another option would be to always use the background and pring on the plain paper.

  • Need help on -- Pre printed stationary. oracle report

    Hi ,
    We have developed new oracle report which prints AR invoices... This is displaying properly from apps.. but when sent to printer .. the first page is printing properly .. from second page onwards .. it is leaving one blank line...
    1 page -- ok..
    2nd page --- 1 line
    3rd page ---- 2 lines ... and so on it is getting incremented one line per page...
    I have checked properties for all the groups and frames .. but no luck..
    Will there be any printer setup causing this problem ... ??
    can throw some light on this ..?
    Thanks in advance ..
    Naveen

    Hello,
    You can take a look to :
    http://www.bizfonts.com/oracle/
    and
    http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_barcode.htm
    Regards

  • How to select the Printer in Oracle Reports 6i R2 (Windows 7)

    Hi,
    In a client site they have more than one printer suppose one is dot matrix and other one is laser printer or some other brands.
    They take printouts in both. Recently I installed Oracle Forms & Reports 6i R2 Runtimes in some Windows 7 32 bit PCs. In those PCs, its not allow to choose the printer, it print with windows default printer.
    So Is there any way to give an option to select the printer...??
    Thank You.

    Client/Server version:
    - D2KWUTIL.PLL library provides a 'Select Printer' dialog box to be used in Forms: WIN_API_DIALOG.SELECT_PRINTER
    http://guenter-huerkamp.dyndns.org/oracle-doc/docs/html/d2kwutil.html
    I suggest you to create a form to invoke the report, allowing user to select the printer and then pass it as parameter DESNAME

  • Number of times the record to be printed in Oracle reports

    I have a requirement to print each record in specified number of times based on one of the field of
    the record.
    For Ex: Each record has the following fields and I need to print each record based on Quantity
    Cust PO Number Item Number Quantity
    PO1234          1P1 20
    PO3456          1P2 15
    I need to print the first record 20 times and second record 15 times.
    Can you please suggest if we can set any parameter or printer option before each record to direct it to be printed in specified number of times?
    Thanks,
    Rakesh

    WITH DATA AS (SELECT 'PO1234' CUST_PO_NUMBER, '1P1' ITEM_NUMBER, 20 QUANTITY FROM DUAL
                  UNION ALL
                  SELECT 'PO3456' CUST_PO_NUMBER, '1P2' ITEM_NUMBER, 15 QUANTITY FROM DUAL
         COUNTER AS (SELECT LEVEL LVL FROM DUAL CONNECT BY LEVEL<1000)
    SELECT * FROM DATA, COUNTER WHERE LVL<=QUANTITYreplace the first with-path (data) with your table

  • Character Mode in Reports9i

    Hi,
    I need to print a pre printed stationary Report. I am using forms9i. Can I use reports 9i for the above requirement?
    If character mode printing supported in Reports 9i
    Thanks & Regards
    Sajan

    Thanks
    Meanwhile I found out how to get the report in character mode. Could some one help me with printer definition files. How exactly should I use it....

Maybe you are looking for

  • Trouble Exporting to WMV

    I have a little movie that runs 1:26 and when I export it to WMV it stops at 0:30. Is there any way of making the length unlimited? I am using iMovie 6 HD and just sent for the v9 upgrade. Does the upgrade do this?

  • WRT600N Security Log

    Is anyone else having this prob? When I view my logs , my security log keeps saying incorect username-password=admin and gives my laptop pc address. Starnge even though i can lod in with no probs with my password. I am hoping this is just a bug that

  • Deployer Exception in creating datasource

    Hi, I am using weblogic 10g appserver to run the appplication and oracle 10g as the backend. I am trying to create a data source in the server and trying to test it. But I am unable to do it. I am getting the below error when I test the connection. C

  • Queries to hussein and others

    Hi people/Hussein, I have few queries which i dont understand clearly.please correct my doubts. 1) how can find the modules/products which have got installed in my oracle applications database is there any table from where can i query? will patchsets

  • Using layers within an action

    I am new to Photoshop and I am using CS. I am trying to resize about 2500 images that are in a single folder. They vary from JPEG, to TIFF, to EPS files. I need to do multiple steps in an "action" and also need to save as to another folder. I need to