Character Mode printing in Reports 9i on winXP

I need to print a pre printed stationary Report in character mode. I am using reports9i. i had made all the basic changes,but it is not working for me.So please let me know the exact solution for this problem.This is very urgent !
Reagrds
Manoj Baghel

While u run the report any messages come or not . please specify

Similar Messages

  • 9i report character mode printing under Win2000/Solaris 8i

    i have developed my application in oracle 9i in windows 2000 environment. i want to print the reports in "character mode" on dot matrix printer.
    how to do this ?.
    i have given the runtime paratmeter as
    Set_Report_Object(repid,Report_other,'mode=CHARACTER')
    but it gives an
    error "rep-1920 character mode runtime incompatible with DESFORMAT of PDF,HTML,HTMLCSS,RTF"
    i need to transfer the application into solaris 8i system. if the character mode printing is not available under windows environment is it possible to print the reports in character mode is the reports are in solaris system?

    While u run the report any messages come or not . please specify

  • Character mode printing

    Hi all,
    I am facing the problem with character mode printing. I can see the output on the screen without wrapping. But in the print it will be wrapped. As per the replies in the forum, I changed the desformat to wide, but it increased the width a little but still wraps a portion of it. I also tried desformat=wide180 still it is the same. I also changed the orientation to landscape and still it is the same.
    These reports are running fine in unix based reports 2.5 character mode. But in windows, I face this problem.
    If anybody knows the solution, please advise as soon as possible.
    Thanks & Regards.
    Padma S Bhat
    [email protected]

    hi,
    At design time use fontsize 12 because that is default.
    In case u are calling a report froma form set the report_object properties like desformat.Also see whether the prn files are existing in the appropriate directory.
    Regards
    Deepak

  • Local Character mode printing ways on pc

    Hi all ,,
    I succeed on printing on line printer on terminal unix from my application server defined on windows ,but now I have this problem which is how to print character mode to local printer on pc , the file generated on the server as file how to print it on character mode printer link to a certain pc
    Best Regards
    Maher Habash

    While u run the report any messages come or not . please specify

  • Character mode printing in oracle reports 6i

    Hello Experts,
    I would like to print my report in character mode.
    SO please guide me what all setting i am required to
    make before proceeding for printing.
    Thanks in advance
    AJAY K KHANNA

    hey praful I think they are all old threads and
    hope they all got there ans as now it has been around more than a year
    to these threads so stop answering these and help new ones

  • Reports 6i - Character Mode Printing

    Hi all,
    I am working on Oracle Reports (6i) and I had to generate the report to a physical file using Forms and Reports 6i. I have been generating the report to Screen and saving the report output to a PDF. But if I select the File int he DesType and give the filename to the DesName as "MyDrive:\ReportOutput" with any extension (.txt, csv, pdf, xml) I could not see the file in the drive sepcified. Whereas when I generate the report from the Report Builder with the same name as the DesName Parameter i could see the report. I hope it to be a configuration issue. Can anyone help me in this regard. And one more thing, If I got the file with extension as ".PDF" I could not open the file as such. But if text or csv then i could see the report output.
    Thanks.
    Ravi
    Edited by: user10902305 on Jan 16, 2012 5:00 PM

    Since a solid line is a bitmapped object, the only way you'll be able to get something like that is to run in bitmapped mode. Sorry, but that's pretty much the difference between running in bitmap vs. character mode.
    Hope that helps,
    Toby

  • Urgent... ( Character Mode Printing)

    Hi friends,
    We are using Report 6i. We are facing a problem while printing reports in Character. In win-98 it works fine, but the same report does'nt print propertly in WIN-XP PC. In XP a Blank line are generated after each line.
    Can somebody help us in this regard.
    Sanjay (INDIA)

    Hi,
    First create your .prt file. In this file, you must define the printer escape sequence for making an object print in bold format, for example. Most of the supplied .prt files incorporate this code. An example of a HP printer setting is:
    code "1"          esc"(s7B"
    code "2"          esc"(s0B"
    Check your printer settings and/or consult your printer manual for more information on other effects, such as italic.
    Next build your character mode report.
    The report must now be set to the .prt file. Set the DESFORMAT system parameter for your report to test.prt (no need for .prt extension). This can also be set as a runtime parameter.
    Next, go to the object in the report that you want to print in bold; such as, boilerplate text. Click on the properties for the boilerplate text, and go to the 'Printer Codes' tab. References to the escape codes shown above must be entered here in the Before and After fields. You are interested in the BOLD On and Off printer escape sequences so we would put &1 in the before and &2 in the after field.
    Save and run the report directing the output to a valid printer. The printed version of the character mode report should incorporate your changes.
    NOTE: You do not have to use &1, and so forth, Long postings are being truncated to ~1 kB at this time.

  • Problem with character mode printing on epson lx-300

    Greetings
    I developed a character mode report and is printing fine on the printer lx-300 when I use Reports 6i (Client/Server)
    We migrated all the platform to OAS 10G Release2 bu the same report has the following behaviour:
    1. The left margin is shift to lthe right about 2 inches.
    2. Is printing shrinked and the characters doesn't see well.
    The report is a character mode report of (132 columns, 66 lines).
    I set the default prt to:
    printer "dflt"
    height 66
    width 132
    after page control(L)
    return ""
    linefeed control(J)
    The run parameters are mode=character and desformat=dlft.prt
    Anybody has experience using character mode reports on 10g on matrix printers like epson lx-300?
    Thanks!

    Hi Agung,
    Here is a way out for the issue you have submitted. I can't guarantee that this wayout work perfectly:
    Question:
    As we know that the dos matrix printer supports dos prompt and thus printing speed and
    life of the printing head is comparatively more than what we print the same in graphical format.
    So when I tried to print from SAP Bone in dot matrix printer, the printing speed is very slow and quality of printout is not good enough.
    Any clarifications on this regard would prove very helpful to me.
    Regards,
    xxxxx
    Consultant Business solutions.
    Solution:
    Do you use one of this printer types:
    Dot Matrix, Printer, Needle Printer, Citizen ProDot 300 , Oki Microline, Epson FX880, Epson FX890 ?
    Here the stepwise I have tried :
    In order to print using Dot Matrix printers, follow the below
    instructions:
    1. Run SAP Business One.
    2. Click the upper menu 'File' and select 'Page Setup'.
    3. The Print Setup window opens. Under 'Paper', in the field 'Size', select 'Letter' from the drop down menu.
    4. Click OK to confirm your selection.
    5. On your desktop, click Start => Settings => Printers.
    6. Right click on the required Dot Matrix printer and select 'Printing Preferences...'.
    7. Click the 'Paper/Quality' tab page and click the 'Advanced' pushbutton.
    8. Under'Paper/Output'=> 'Paper Size', click on the underlined paper size(e.g. A4) and select 'Letter' from the drop down menu.
    Note that if you leave the value 'A4', each page will be spreaded over 2 pages when printing using Dot Matrix printers.
    9. Under 'Graphic'=> 'Print Quality', click on the underlined value (e.g. 230X250 dots per inch) and select '120X144 dots per inch' from thedrop down menu.
    Note that in case the value '120X144' is not available you should select a similar value from the list.
    I did not test it yet and I am not so sure about the result but you could test it.
    Rgds,

  • Character Mode printing in XP

    How to print a report in charachter mode in XP. In win 98 m/c it is working properly but on win XP m/c it always print character mode into graphic mode.
    Please help....

    Hi,
    This not a restriction of smartforms. It is possibly a desciption of the deviec type used in SAP. If you use a windows device type like SAPWIN, then graphic mode is always used. If you use a specific device type like e.g. EPESCP9 , then possibly the character mode is used.
    Regards,
    Aidan

  • CR VS2005 ActiveX Printing Mode print the report larger

    Hi,
    I have a problem with CR VS2005 for ActiveX printing mode. It will print the report larger than usual so when I print it to the printer, some parts will cut off. But the report will print okay if I export it to pdf and print from the acrobat reader.
    Can anybody help me how to fix this?
    I'm using this in my development:
    OS: WIndows XP SP2
    Visual Studio 2005
    CR for VS2005
    and the application is web application.
    Thanks before...

    1) Try this with SP 1 for CR 10.2 applied:
    https://smpdl.sap-ag.de/~sapidp/012002523100006007872008E/crvs05sp1.exe
    2) see if there are any updates for your printer driver
    3) See if you can duplicate this with a different printer driver
    4) I believe CR 10.2 had "No printer" option (Design | Page Setup). Enable that.
    Ludek

  • Printing of Character Mode Reports on 3 tier on Dev 6i

    Has anyone done character mode printing of reports on Dev6i? We are facing problem of REP: 3002. We have already loaded Orarrp on server and client and also tried changing the service property from log on as System Account to Log on as Administrator and also vice-versa, but nothing seems to work.
    Any help will be appreciated.
    Plz repond to email: [email protected]
    B.Suryaprakash

    The first thing to do is to make sure that you can print a character mode report on the server box just using the rwrun60 executable.
    If you can do this then you should take a look and make sure that the user that's started the reports server has access to the printer that you're trying to print to (you seem to have changed from the localsystem log on to Administrator, but are you sure that Administrator can access those printers).
    I think that orarrp is a red herring here - and I'm not sure why you're trying to set it up.
    Hope this helps,
    Danny

  • Character Mode Report Overriden as Bitmapped Report

    Hi Hussein,
    I seems that my report problem is that the Concurrent Manager always override it( treated) my customize report as "bitmapped" report. That is why no matter
    what SRW print style I am using . It alway fit it on a paper display size of 8"x11" portrait.
    How do I change this bitmapped default to a character mode printing? Where does the Concurrent Manager check when to use "character" and "bitmapped".
    Please Help
    Thanks a lot

    Hi,
    Of course you can use an existing print style with the desired formatting.
    Did you bounce the CM after doing the necessary changes?
    Did you check the output file from the application only or this happens to the printout as well?
    If the printout is not formatted properly, this indicates that the SRW driver is not used by your report. Please note that the SRW driver is used when the completed output file is sent to the printer.
    Note: 60936.1 - Step By Step Guide to Set Up a Printer in Oracle Applications
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=60936.1
    Regards,
    Hussein

  • How to open a Character mode report in report designer 2.5

    I am trying to open a character mode reoprt in Report Designer 2.5 and .. getting an error message:
    Waring: Character-mode report 'XYZ' is being opened as bit-mapped report.
    Warning: Page width of report '<report name>' changed to fit the font for a character cell. Might be a consequence of font-mapping.
    Is thier any way to open Character-mode report in Report Designer 2.5
    Report is designed for AR module.
    Thanks,

    ACCOUNTING SYSTEM
    2006-2007 From Date : 01-JUL-06
    Printed On : Friday August 31 2007 11:13 AM To Date : 30-SEP-07
    G A/C. Code 99-99-9999 Description: xxxxxxxxxxxxx H
    -- DOC. # -- -- DATE -Chq/Slip# ---------- N A R R A T I O N -- -- DEBIT -- -- CREDIT -- -- BALANCE --
    Opening Balance: -999,999,999.00 Cr.
    G *** Total *** 0.00 0.00 -999,999,999.00H
    ================= ================= =================
    when i run character mode report in browser then display this output properly
    but sir problem is that when i print the report
    G(use for bold)
    is not working
    means not print in bold format in printer
    same character print G
    do you have any idea when i print through browser to printer G for bold purpose its work to printer ?

  • Reports in Character Mode - Can I generate a PDF?

    Hi, i'm working with Forms 6i in Character Mode. Forms and Reports are in Unix Server.
    Now, all the forms call the reports like this:
    run_product(REPORTS, lower(lv_reporte), SYNCHRONOUS, BATCH, FILESYSTEM, list_id, null);
    HOST('sh imprime '||lv_salida||' '||to_char(ln_cantidad)||' '||lv_ccola, NO_SCREEN);
    "Sh Imprime" is a JOB, it's redirect the output to the printer.
    I need, in character mode, Run the Report to a PDF, ¿It can be possible?
    I don't wanna create the .lis, i wanna run the report and generate a PDF.
    Thanks.
    Regards.

    I can't generate a PDF, but if the form call the report in "BITMAP" mode and non character without archive.prt, i'ts generates a PostScript in UNIX.
    Later, I transform the Ps to PDF, with ghostscript PS2PDF.

  • Report in Character MODE

    I have an Oracle Reports Server 6i and Forms Server 6i on the same machine.
    Operation system Windows 2000 Server.
    I can not run reports with BITMAP mode after runing report in CHARACTER MODE.
    1 report: I run report on Forms server using command line:
    rwcli60.exe report=report1.rep MODE=CHARCTER DESTYPE=MAIL DESNAME=MyMail BACKGROUND=YES server=REP_SERVER
    It works correct.
    When I run report by URL:
    2 report: http://myhost/rwcgi60.exe?report=report2.rep DESTYPE=CACHE DESFORMAT=HTML server=REP_SERVER MODE=BITMAP
    Report fails with message
    REP-1920 character mode runtime incompatible with DESFORMAT of PDF,HTML,HTMLCSS or RTF
    Then I restart reports server service and report2 works correct but after runing report1 report2 does not work.
    Whats are problem?

    Hi,
    You are running into known bug 2460641. It is fixed in the latest patchset, patchset 13. Please give it a try as it should resolve your issue. If it does not, I'd suggest contacting Oracle Support.
    Hope that helps,
    Toby

Maybe you are looking for