Character mode report and Report Width & Height

Hi
I need to print a report on a pre-printed pay slip which is 4" height x 9" width.
May i know what value should i set for these parameter?
Report Level: Unit of measurement: Inch
Report Level: Design in Character Units: Yes
Layout Model, Main Section: Width: 9, Height: 4
Layout Model, Character Mode: Report Width: 132, Report Height: 24
Apps SRW driver: width: 132, height: 24
If i need to print the character with 15cpi, is the value of 24 for the height (above) correct?
What should be the value to set for Ruler Settings, character cell size: horizontal & vertical?
Thanks
Ung

Could it be because A4 is actually 11.5" by 8.5" ?
Message was edited by:
Dave Hemming
In fact the ISO standard is 8.3" × 11.7". 8.5" x 11" is "Letter", which nobody uses any more.

Similar Messages

Difference between Asset Intelligence 09A report and reports in the Software Metering folder

Dear all,
I can not seem to grasp the difference between Asset Intelligence 09x reports and reports in the Software Metering folder. Do they extract conclusions based on the same data and which data are those? I also have come to notice that there are occasional dicrepancies
between them. Why would this be?

Hi,
1. Software metering allows you to create a rule and meter application usage very granular, when it is started, how many times , how long it has been used e.t.c, Asset intellegence doesn't require you to create any rules it will only inventory start/stop
so you can get reports like "all computers that hasn't started a application in x days".
2.It depends on the license agreement for that application, but yes you can get how many has started a specific application within a timeframe.
3.No
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

PLEASE HELP! members deleted after refreshing, current report and report layout

Hi ,
First of all , before explain my issue, I read the note about March Microsoft update, and my symptoms aren't exactly similar but almost the same.
And it appeared last week, so one month after the ms update.
So, I opened my report, and I see that current report and report layout are greyed out,
I try to refresh the report and some members in rows axis are deleted.
I'm only one to have this problem in my team.
Is there anybody able to solve my issue please ?
Thanks in advance
Jonas
P.S sorry for my english.

Hi Marco,
First of all, sorry to reply long a time after you answer but I was so very busy with another things.
In fact, It's was a mistake, It's sure that it's not about an update. My issue comes only when I save my report in a different server, When I'm in the source server, I select the target server with "Select Another Connection" process And I save my report in the target server.
After that, lot of members are dissapeared in my row axis.
I don't know why.

Brief explanation of reports and report painters

hi gurus,
pls if any one knows what is reports and report painters and how it will help ful in real time scenario, why do we prepare report painters? what it is purpose of report painters.
thanks in advance. points will be awarded.
regards,
sandeep.ch

Hi,
With the help of report painter you can create(design) your customised reports. The report painter does not require any ABAP coding, The functional consultants use this report painter tool to create the reports.
For example, In profitability analysis the report painter tool uses vastly where you can design your own report with the combination of characterstics (Customer wise, product wise, etc.) and value fields (Sales, Cost of goods sold, Gross profit, Net profit, etc.) to analyse the profitability..
Beside these reports, the ABAP reports require ABAP coding.
Hope it clarifies your doubt.

Character Mode printing in Reports 9i on winXP

I need to print a pre printed stationary Report in character mode. I am using reports9i. i had made all the basic changes,but it is not working for me.So please let me know the exact solution for this problem.This is very urgent !
Reagrds
Manoj Baghel

While u run the report any messages come or not . please specify

How to increase and descrease width/height of an item?

Hi,
My question is, there are so many item are displayed in the form and user wants to increase/decrease the size(width/height) of any item, just like we changes the size of any window.
how we can do the same in form at run time. if anyone is having solution pl fwd to me at [email protected] or [email protected]
thanks in advance.
Regards,
Anil

Hi Anil
Use the SET_ITEM_PROPERTY(item_name, WIDTH, y) for changing the width of the item and similarly for changinging the HEIGHT.
Put this command in a loop and assign the loop variable to the "y" variable in the SET_ITEM_PROPERTY. Doing this will change your item width and height at the run time.
try this and for any other queries in Forms , reports, ORACLE database pl. feel free to get in touch with me.
Ciao take care
Manish

Web design reporter and Report designer is not working in SAP BI

Hello,
I am facing JAVA RFC error in Web reporting designing and reporting designer tools in BEx application. For more details please check the attachment in mail Any one help me for this issue.
Please check the my system details in the following
SAP ECC 6.0 EHP 6 with ABAP stack
SAP BI 740 with ABAP stack
BO 4.1
Thanks & regards,
Surendra

Hi,
Check with basis team , either they have configured rfc connection properly or not.
Refer below also:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a?QuickLink=index&…
Thanks.

Swfloader and accessing width/height

Hi,
I have an AS3 swf that I'm trying to embed within a Flex 3 application. The problem is that I need to know the size of the available width/height from inside the swf. When the swf is embedded in a webpage, I can easily access this by stage.stageWidth, but in the case of an embedded swf, this doesn't work because the stage is of the entire application and not just my swf. Is there anyway in my embedded swf to figure out these values?
Thanks!
Christie

If the embedded SWF was loaded via SWFLoader, then this.parent.parent.parent.width (and height) from within the embedded SWF will give you what you want.

Parametric reports and report server

hi,
how can I invoke parametric reports on report server.
parameter form is not visible while invoking the report, hence
giving errors.
if any one can help
Sreekant

use paramform=html when you invoke reports from web. Report
server creates html page for you based on parameter form defined
at design time.

Collect information from an exprenal SQL DB and collect it into a SCOM Databag so we can collect the data, report and report on it.

The DB is collecting counts. We want to collect the counts into a bag, then once in the bag be able to report the counts (need to collect on an hourly basis)

Hi TLC426,
you can use a timed powershell or vb script to connect to the db and run a sql command against it. The result must then be parsed and returned in the property bag.
As a starting point you should have a look at Pete Zerger's blog post
http://www.systemcentercentral.com/scom-query-sql-database-for-value-in-monitoring-script/ .
Just wrap around the creation of a property bag and replace the eventlog entry generation with returning the value.
Please keep in mind that you should always should return a property bag, even it is empty.
Regards
Boris
Regards, Boris

Reporting and Report tools for CCM

Can anyone point me in the right direction or give me some suggestions on reporting in CCM. To be a little more specific; for example if a few users complain they are tryin to make outbound calls, and getting a busy signal, is there any reporting tool that I can use to pinpoint the problem or eventually be able to say, hey we need another phone line, etc...
Also. User calls can complains that the calls they are making lack in quality, how do I report on this or research?

In order to determine if there are any records in the Structured Query Language (SQL) database, complete these steps:
Choose Start > Programs > SQL > Enterprise Manager > Microsoft SQL Servers > SQL Server Group.
Choose Publisher Server > Databases.
Choose CDR > Tables. Right-click the CallDetailRecord table.
Choose Open Table > Return All Rows. Determine if there are any records.
If many records appear, complete this procedure to remove records from ART:
Choose Programs > SQL Server > Query Analyzer. Log in and choose ART database.
Run these queries:
delete from Tbl_Load_History
delete from Tbl_Dump_PkID
delete from Tbl_Error_Id_Map
delete from Tbl_Billing_Data
delete from Tbl_Billing_Error
delete from Tbl_Dump_CallDetailRecord
delete from Tbl_Dump_CallDetailRecordDiagnostic
This forces ART to get all the old CDRs into ART in the next scheduled loading time. By default, CDR data is loaded every day from midnight to 5 a.m.
Restart the CDR Insert and DBL Monitor Services from CCM Administration > Application >Cisco CCM Serviceability >Tools > Control Center.
Refer to the How can I manually purge the ART database? section of CallManager Issue Resolution with CDR and ART FAQ for more information.
Note: Information deletes from the ART database but not from the CDR.
Note: If you do not see any records, there are no CDR entries for that time and date range. Determine if conditions are met for CDR generation. CDR records are generated in these circumstances:
The service parameters CdrEnabled and CallDiagnosticsEnabled are set to True.
The call is established and has a talk duration greater than 0.
The call fails and has a cause code that reflects the error.
In order to set the service parameters, choose Service > Service Parameters, and make sure that the service parameters CdrEnabled and CallDiagnosticsEnabled are set to True in all of the Cisco CallManager servers, both publisher and subscriber.

BI content InfoCube missing for reporting and reports show'~' in with KFs

Hello friends,
I need help with the following two issue with the business content query that I have
installed in DEV system.
1. I have installed a BI content infocube and 5 standard
   queries with it, I am able to see and execute the query but some other
   users are not able to see the Infocube listed under Infoarea. The same
   users were able to see the Infocube if they tried creating a new query.
2. When I execute the same installed standard BI content query all the key figures values in columns are shown with a '~' symbol before and after it.
   example: $ 198.63 and -$ 0.02
   How do I over come this ? and what might be the reason ? Please suggest.
Thanks,
SONU.

Hi Sonu,
In Tcode SU01 check roles and profiles for your users.
Then in PFCG check the authorizations for that specific roles you have found in SU01.
Maybe your users have restrictions on query names: maybe they are authorized to execute only query starting with "Z" and BC query start with "0".
Ciao.
Riccardo.
PS: If Bhanu has solved your problem for item 2 I think you have to assign points...

How to open a Character mode report in report designer 2.5

I am trying to open a character mode reoprt in Report Designer 2.5 and .. getting an error message:
Waring: Character-mode report 'XYZ' is being opened as bit-mapped report.
Warning: Page width of report '<report name>' changed to fit the font for a character cell. Might be a consequence of font-mapping.
Is thier any way to open Character-mode report in Report Designer 2.5
Report is designed for AR module.
Thanks,

ACCOUNTING SYSTEM
2006-2007 From Date : 01-JUL-06
Printed On : Friday August 31 2007 11:13 AM To Date : 30-SEP-07
G A/C. Code 99-99-9999 Description: xxxxxxxxxxxxx H
-- DOC. # -- -- DATE -Chq/Slip# ---------- N A R R A T I O N -- -- DEBIT -- -- CREDIT -- -- BALANCE --
Opening Balance: -999,999,999.00 Cr.
G *** Total *** 0.00 0.00 -999,999,999.00H
================= ================= =================
when i run character mode report in browser then display this output properly
but sir problem is that when i print the report
G(use for bold)
is not working
means not print in bold format in printer
same character print G
do you have any idea when i print through browser to printer G for bold purpose its work to printer ?

Report in Character MODE

I have an Oracle Reports Server 6i and Forms Server 6i on the same machine.
Operation system Windows 2000 Server.
I can not run reports with BITMAP mode after runing report in CHARACTER MODE.
1 report: I run report on Forms server using command line:
rwcli60.exe report=report1.rep MODE=CHARCTER DESTYPE=MAIL DESNAME=MyMail BACKGROUND=YES server=REP_SERVER
It works correct.
When I run report by URL:
2 report: http://myhost/rwcgi60.exe?report=report2.rep DESTYPE=CACHE DESFORMAT=HTML server=REP_SERVER MODE=BITMAP
Report fails with message
REP-1920 character mode runtime incompatible with DESFORMAT of PDF,HTML,HTMLCSS or RTF
Then I restart reports server service and report2 works correct but after runing report1 report2 does not work.
Whats are problem?

Hi,
You are running into known bug 2460641. It is fixed in the latest patchset, patchset 13. Please give it a try as it should resolve your issue. If it does not, I'd suggest contacting Oracle Support.
Hope that helps,
Toby

Printing barcode in oracle report 6i in character mode

Hi there,
I am new in oracle reports, especially in printing it in character mode.
I am trying to create a report for ticketing purposes, so I have to put barcode on it.
So far, I did follow this link Printing in character mode (urgent)
and yes, I didn't get it. I been doing this 3 days already and no successful result.
I just don't get the commands in .prt file and how could i integrate it in oracle report 6i.
The printer I use : epson LX-300+
windows OS.
Your help is highly needed, any opinion will do. I just need help that bad.
Thanks..
Edited by: shynn on Jul 18, 2012 6:56 PM

Hi guys,
I already get the character mode using ESC character.
Just this, I need your help.. Do you know the ESC code for the barcode that we could add in .prt file?
Just the ESC code, but if there is needed for configuration for that, kindly add it up.
Thanks,

Character mode report and Report Width & Height

Similar Messages

Maybe you are looking for