Character Mode Reports On Winxp/2000

I am developer character mode report in oracle developer 6i.
when i am running it on winxp or win2000 then its om in preview but it takes double space while printing.
Please send me any sample character mode on scott schema which can't take double space in printing.
Please write its step-by-step procedure becouse its easy to find where i am doing mistake.
Thanking U.
Manraj Gill.

Hi
Three things here:
1. You must have a report define for characte mode.
2. You set up the printer definition file .prt files present under $ORACLE_HOME/reports60/printer.
3. While running throug web, you either specify mode=character in url request or set this inside the Reports definition file permanently. In
URL request, you also need to specify the desformat=<printer_prt_file_name>.
This will work.
Thanks
Rohit

Similar Messages

WinXP:Ok .vs. Win2000:Error character mode report (6i)

Hello,
We have a character mode report designed and running in a Windows XP machine.
To make it work was necessary to create a custom PRT file that contains the condensed and non condensed printer codes used by the report.
After some tries it is running ok.
But it will be used in a Windows 2000 Server machine. After installing reports (6i) and patches we made a copy of the custom prt file file used in the XP installation and tested.
Unfortunately it doesn't work and the printed page is unformated. Due to the characters printed in non condensed mode, the line doesn't fit the paper width wrapping to the next line. It seems that the printer control characters doesn't work...
Trying to understand why, we used the "print to file" option in xp machine. The control characters are generated ok: "".
Doing the same thing when running in a Win2000 machine it generates strange control characters.
In addition, if we open the file generated by the Win2000 machine in the WinXP machine, all printer control characters seems to be ok.
Does anyone know why does it occur and/or how to fix that?
Thanks,
Vinicius Pacheco

This is a database forum. I suggest you try posting this question in one of the more relevant forums, such as Reports or Oracle Application Server - General.
Good luck, APC

WinXP Ok vs Win2000 Bad character mode report

Hello,
We have a character mode report designed and running in a Windows XP machine.
To make it work was necessary to create a custom PRT file that contains the condensed and non condensed codes used by the report.
After some tries it is running ok.
But it will be used in a Windows 2000 Server machine. After installing reports and patches we made a copy of the custom prt file file used in the XP installation and tested.
Unfortunately it doesn't work and the printed page is totally misformated. It seems that the control characters doesn't work...
Trying to understand wy, we use the "print to file" option in xp machine. The control characters are generated ok: "".
Doing the same thing when running in a Win2000 machine it generates wrong control characters.
In addition, if we open the file generate by the Win2000 machine in the WinXP machine, the control characters seems to be ok.
Does anyone know why does it occur and/or how to fix that?
Thanks,
Vinicius Pacheco

OK people, the problem is solved!
The problem was the Epson Dfx5000 printer driver! WinXp and Win2K drivers have a thing in the property page called Advanced Features which has to do with the way the data is spooled to the printer. If you turn it on (default), you get bitmap reports all the time, otherwise you get what you want correctly. This was found by my Supervisor.
i hope this is useful.
Thanks and regards to for all

URGENT: Problem in printing Character Mode Report in Chinese Version

Hello,
I am working with Reports 6i. i have developed one Character mode report. This report is working and printing fine in Windows 2000 Server (English Version). But, this report is not working properly in Windows 2000 Professional (Traditional Chinese Version) where i have compiled report in Chinese Version Machine. And, i am getting the Preview properly. Main problem is at the time of printing. I am using EPSON LQ - 2070 Dot Matrix Printer.
Please help me on this issue.
Thanks in advance.
S.Sudhakar Sankar.

Try printing to file first and ensure that the output is correct in something like "notepad" with the appropriate font.

READ-ONLY CHARACTER MODE REPORT OUTPUT

Hi,
I am using Developer Suite 10g Report Builder to create a character mode report. I use commands as below to open the report output;
PROCEDURE Run_Report (vReportname varchar2) IS
LINEBUF VARCHAR2(2000);
BEGIN
linebuf := NULL;
linebuf :='C:\DevSuiteHome_1\bin\rwrun ';
linebuf :=linebuf||vReportname;
linebuf :=linebuf||'destype=file desname=c:\windows\temp\L610.prn ';
linebuf :=linebuf||'&& "C:\Program Files\TextPad 5\TextPad.exe" C:\windows\temp\L610.prn';
host('cmd /c '||linebuf);
END;
The reason why I am using third party software is because customer wanted to view the report output first before proceed with printing and I had tried with all option PDF, HTML, Notepad, Wordpad, Ms Word Viewer 2003, they all got problem wether fail to preview the output nicely or printer cannot recognize the generic output. As for now Textpad is the best in both to preview nicely and printer with generic driver can print the output nicely.
But there is another problem. Anybody can edit the output preview onTextpad and customer do not want that to happend (security for accounting data).
So, can anyone suggest me how to create the ouput in READ-ONLY mode? But please do not advise me to print directly to the printer because on 9i PREVIEWER function works well while on 10g this function has been obselate so I need to find the replacement of PREVIEWER function to running on web.
Thanks.
Regards,
Faisal

What about trying to view the text in the browser (IE/Mozilla)? That is what we do about reports produced by reports server: they are written in files on the reports server machine and opened with the browser, or they are sent directly to the printer.
Otherwise, i simply see no way to prevent a text editor from editing the file on screen. If, let's say you make the file read-omly, that won't do, for the user may change the data on screen and print what's on screen without saving the file...

Character mode report and 9iAS

Hi, our company is migrating system developed by Developer 2000 to Developer 9i on 9iAS. Our old system has lots of character mode reports.
Is there any ways to preview these character mode reports on Web on 9iAS? Is it neccessary to convert all character mode to bitmap format?
Thank you very much in advance.
cheers,
Kathy

No, you can still run them as the are over the web (they won't look great, but they should still run without conversion).
Regards,
Danny

How to send a character mode report from Oracle Form 10g to a printer.

how sending a character mode report from Oracle 10g report to a printer.
I'm sending to a printer located in the network
i have theses parameter report
desformat = prtname
desname=??????
destype= ?????
mode=character
i would like to preview the report before to send to a printer
slds

ACCOUNTING SYSTEM
2006-2007 From Date : 01-JUL-06
Printed On : Friday August 31 2007 11:13 AM To Date : 30-SEP-07
G A/C. Code 99-99-9999 Description: xxxxxxxxxxxxx H
-- DOC. # -- -- DATE -Chq/Slip# ---------- N A R R A T I O N -- -- DEBIT -- -- CREDIT -- -- BALANCE --
Opening Balance: -999,999,999.00 Cr.
G *** Total *** 0.00 0.00 -999,999,999.00H
================= ================= =================
when i run character mode report in browser then display this output properly
but sir problem is that when i print the report
G(use for bold)
is not working
means not print in bold format in printer
same character print G
do you have any idea when i print through browser to printer G for bold purpose its work to printer ?

Character Mode Report Print in Developer 6i

How i can create character mode reports for efficeint printing on dot matrix printers. I m not asking about the Character Mode Template(in the report wizard). And how i can convert the existing reports to Character Mode.
I am using Reports 6i.

Please post this question in the Rpeorts forum: Reports

How to Apply XML PArtial definition in Character mode report

Hi All
I want to apply some XML code definition in Character mode report The same XML is working fine in Bitmap
Plese give me some idea.

Any update? .please give some idea..... members..plz

Linebreak Code in Character Mode Report

Dear All
I m saving a Character Mode Report which is 132 column Wide, and i can access that report in Note Pad in proper format and alignment but when i m use WORDPAD, it open in un aligned format i mean with line break.
so any one can give me any Idea so i can open that report in WORDPAD too.

Take a look at the .prt file that you are using. The linebreak code is stored in there and you can alter it to the appropriate code for your printer/platform/application to view correctly.

Font Size in Character Mode Report

Hi ,
I have to print a report in a pre printed Stationary, which has tabular columns The columns are little bit small . when i have bigger data say value like 9999999.45 it over prints on the pre printed text. is it possible to reduce the size of the data at these places and be normal in other parts of the report.
i.e. Font size reduced inside the tabular column and normal for the remaining part of the report
Will appreciate the help

Font size in character mode report cannot be control through Oracle Report.
 
You can use report .prt file or manually set the printer to print character in small size.
 
Raj 
www.oraclebrains.com<a>
 POWERED by the people, to the people and for the people WHERE ORACLE IS PASSION.

Update column in Character Mode Report

Hi,
I hope so you all r fine.M facing a problem in character mode reports.i want to increase width of item field but when i opens paper layout of rdf there is no such colum.actually this column depends on parameter value.but am astonish how it is displays when it is not exist.
Can anybody help me.
Report name:Transaction Register
Column:Item Description
Regards,
Shakeel

but am astonish how it is displays when it is not exist.So am I ;-)
I'm sure it exists. If the data model uses a lot of lexical parameters, it may be confusing to figure out where the data comes from. Without any more information on your report, it is impossible to tell.

Problem in Character Mode Report (Urgent)

Dear All
i m designing a character mode report
and when i preview it ,,, it will display
different report font which is big in size
and width so it is not fit in the designed columns
can any one help me ,, y this problem is exist
though i m using Dot matrix printer EPSON DFX-8500
printer.

Hi..
If you are directly giving Print from previewer..you need to set printer to 10 cpi (if you want bigger font) and 12 dpi to compress the larger font..
CPI is character per inch so in one inch 10 chr or 12 chr can fir acc to setting.
If you are uploading file on Oracle Apps then you need to set fonts if needed in concurrent manager,printer setting,Style,fonts ..
"But the hardware setting is vewry imp..set the font in DRAFT mode"..
tarak desai
[email protected]

Character mode Report in Landscape Format

Hi All,
I want to print my character mode report in landscape format. But I am not getting it. Everytime I get print as Portrait. I am printing from live previewer of report builder.
I am using Oracle 9i and Report builder 6i (6.0.8.11.3).
I have done following settings:
System Parameter ORIENTATION=Landscape
DESFORMAT=DECLAND.PRT (Given by Oracle)
In the object navigator I have set following properties for Main Section
Width=11
Height=8.5
Orientation=Landscape
Char Mode Width=132
Char Mode height=66
I have done same settings for Header Section and Trailer Section. Please help me.
Thanks in advance.
Regards
Mona

You will need to edit prt files to add the printer escape sequences to change the page orientation to landscape. Printer escape sequences can be obtained from the printer manual, or the printer vendor.
For instance, HP printer escape codes can be obtained from the HP website under the printer support links.
The steps below describe how to print a landscape, character mode report from a Windows NT PC on an HP 4100N Printer. The 4100N is a dual mode printer that can use either PCL or Postscript printer language.
1. Use a web browser to navigate to the HP website and obtain the printer escape codes for the HP 4100N. If you are unable to locate the HP4100N printer, look for generic PCL information. The HP site also includes detailed information on the printer command syntax.
2. The HP4100N printer command for landscape page orientation is "ESC&l1O" - where ESC indicates escape, '&' (ampersand) is the parameterized character, 'l'(lower case letter l) is the group character, '1' (number one) is the printer value character and 'O' (upper case letter O) is the termination character.
NOTE: The HP documentation uses "EC" to signify the escape character.
It also suggests pressing CTRL and the letter P together, then
releasing both keys and pressing the ESC key. If this is done in
a dos editor, a left arrow will actually be displayed on screen.
This character cannot be interpreted by Oracle Reports and will
cause printing errors if used in a .prt file. Instead, just use
the letters "ESC" to indicate that the code that follows is a printer
escape sequence.
3. Make a copy of the wide.prt file and rename it to "mywide.prt."
4. Add the page orientation escapes to mywide.prt file:
printer "mywide"
height 66
width 132
before report esc "&l1O" *** Puts Page in Landscape Orientation***
after page control(L)
after report esc "&l0O" *** Resets page orientation to Portrait ***
return control(M)
linefeed control(J)
SYNTAX NOTES: The escape sequence must be enclosed in double quotes ("). The above comments regarding page orientation are used to clarify where the escape codes gets added, but they should NOT be used when editing
the actual .prt file.
5. Save mywide.prt file to the $ORACLE_HOME\report60\printers\ directory.
6. Go to Windows PC -> Start -> Settings -> Printers and open the properties for the HP printer. Ensure that the option to "Always Spool Raw Data" is checked. This option is usually under the General Printer
Options, or Spool Options. On Windows NT, you must have Administrator privileges to change this setting.
7. Test running the report to the printer and specify desformat mywide. It is not necessary to include the file extension (.prt).
8. The report will now print in landscape orientation.

Problem to print character mode report in Landscape

I set orientation and select but it still print in landscape character mode. When it print in character mode report in portrait format its ok.
I Set and use all the option in report to print in Landscape in character mode.
I ask you please to give me information about the printing definition files and its codes, how to use printer codes. I use two printers
1. Epson LQ2180 2. HP 6L
I used HPLWIDE printing definition files put its still print in portrait format not to print in landscape.
Thanks for corporation
I will wait ur reply...
At this address
[email protected]
[email protected]

Hi,
This sounds like a similar problem that I had (and still having). It was (is) a Bug. Go to metalink.oracle.com and reference this bug#1413754. See if this is your problem as well. My only work around was change the format of the file instead of using character mode I am now using PDF. Which is working fine for me.
~Vannette

Character Mode Reports On Winxp/2000

Similar Messages

Maybe you are looking for