Character Spacing on Pages 05

Hi,
I have a problem, I have been using Pages for many years and I am now using Pages 05, I would like to know if there is a way to adjust the character spacing like in the previous version.
Any answers?
Thanks in advance for helping me,
Rgds.

there is an option to set the character spacing see the attached image. in red is where it can be adjusted.

Similar Messages

Pages '09 Character Spacing No Longer Working

So I tried the new Pages 5 today and it is lacking too many features to count, but most notably for me facing pages and character spacing. I went back to use Pages '09 (version 4.3) and character spacing no longer works for many fonts.
For example, with Century Gothic, when I increase the font size, the characters overlap. When I decreate the font size, they space out like crazy. It's like the physical space the letters take up stays the same regardless of the font size. The character spacing slider in inspector does not work at all for these problem fonts.
Here are some screen shots of the wonky character spacing:
At 9 pts:
At 12 pts:
At 24 pts:
At 48 pts:
I am kind of freaking out - I use Pages to lay out books for my clients and I have no idea what to do. Can anyone help me figure out what to do? I suspect Pages '09 is no longer working for me as a result of the Mavericks upgrade, but I really don't know since I just upgraded to Mavericks a few days ago and hadn't been using Pages with anything other than the Calibri and Impact fonts (which are working fine) since then. Today I started a new book in Pages 5, discovered Century Gothic wouldn't work, so tried to go back to Pages 4.3 and discovered the problem.
Thanks in advance for anyone's assistance!

Okay, so I think I fixed my issue of some fonts not spacing properly in Pages '09 since I updated to Mavericks and installed Pages 5. It's weird though (at least to me)!
1) I tried deleting and reinstalling the font... that didn't work.
2) Per the suggestion in another post, I checked Pages '09 in another account on this computer. I logged out of my account and logged into the guest user account. I opened Pages '09.
3) I typed something into a blank document. The default font was Helvetica, but it was showing up very weird - all these accented, unrecognizable characters. I tried Century Gothic (the font I've been using as an example in this thread). It worked fabulously! I could increase the font, decrease the font, etc. and it behaved normally - no wonky spacing or overlapping characters.
4) Confused by why Helvetica was no longer working now, I opened up FontBook in the guest user account. To my surprise, there were at least a dozen duplicate fonts... this was not an issue in the main account I was having the issue in. Incidentally, Helvetica was NOT one of the fonts with a duplicate - it validated fine.
5) I highlighted all of the fonts and selected to resolve duplicates automatically.
6) I went back into Pages '09 (I may have quit and restarted the application) in the guest user account (same account I was already in). Suddenly, Helvetica was working. Century Gothic was working. Everything seemed to be working.
7) I logged out of the guest user account and logged back into my main account.
8) I re-opened Pages '09 and started a new document. It still works! I looked in FontBook. It looks exactly like how it looked before - no duplicate fonts.
SO: Although no one has ever used the guest account on this computer, it seems to me that somehow its FontBook was totally messed up and somehow resolving the duplicate fonts in the guest user FontBook also fixed my issue in my own account (even though there were no duplicates in that FontBook in the first place).
I am thrilled that this is working, but confused as to why. If any of you smartie pants' out there can shed some light, it would be mucho appreciated.
I hope this helps somebody!!

IWeb 09 + Snow Leopard = Character Spacing / Tracking Disaster!

I have a big problem. Upgraded to Snow Leopard, all went fine... but now much of the text in my iWeb 09 pages are all bunched on top of each other, where they looked fine before. This is primarily a problem with title text, and happens with all new text as well. It seems like at a standard size font, the letters are just a little too close together. But as you increase the size of the font... the letters do not get any more space between them, so the larger titles look like just a pile of letters on top of each other, and are completely and 100% unreadable.
I have tried using the "Character Spacing" slider in Inspector and it literally does nothing, I have tried using the "Loosen Tracking" option in the Format\Font menu and it similarly does nothing at all. I have tried switching fonts and have tried starting new text boxes, and nothing has any effect whatsoever.
I cannot update any of my sites until this gets resolved. Can anybody help?
Screenshot here: http://img22.yfrog.com/i/exampletrackingproblemi.tif/

Try quitting iWeb. deleting the preference file - Home Folder/Library/Preferences/com.apple.iWeb.plist, restarting your Mac, running Disk Utility to repair permissions and then relaunching the application.
iWeb troubleshooting is covered here.....
http://www.iwebformusicians.com/WebMusic/iWebTips.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Error in character spacing when exporting to pdf from word 07

I am having trouble with exporting to pdf from MS Word 07. The character spacing throughout the document is wacky. This also happens when exporting to pdf from a GIS program.
Any help?

I use the term export because that is how it is done in the GIS software that I use - ArcMap 10.
In MS Word I access Adobe Acrobat Pro 9 through the print menu. I am using Windows 7.
I do not always have this trouble, but it started yesterday on a 30 page word doc and then after that, it started on an ArcMap doc.
As for embedding fonts, when I check the Word doc as you suggested, i see many different fonts listed. Some are embedded, some embedded subset, some are not embedded at all. I use styles to manage font types and heading levels. There is nothing fancy about it - all Times New Roman.

Character spacing messes printing and PDF exporting

I'm having problems printing and exporting to PDF from Pages.
The problem is that when I'm using Character spacing (ie. -7%) they display different on screen, on paper and in PDF. They display right on the screen. But PDF and printing get messed up, the spacing is not right and it adds more space to the fonts.
I'm using:
Mac OS X 10.5.1
Pages 3.0.1
Thanks,
Fannar

I was having the very same problem. I was trying to make a business card with my name centered and character spacing at 40%. The character spacing seemed to only work for the first character. When it came to print or export, the text had shifted left as if it were centered with the spacing applied.
Fear not! I found a solution. Instead of directly printing or exporting as a pdf, I chose to save as a PostScript file in the print dialog. I could then open this file in Preview and save as a pdf or print with the designed character spacing.
File>Print>PDF>Save as PostScript..
This work flow also fixed some nasty degradation of smaller fonts.
Pages Developers take note!

Inter-character spacing

Hi,
I am using "Verdana" font to display. I need to increase inter-character spacing. Can anyone help me in solving this.
Thanks,

Three things to look at:
1) Make sure you are on SP6:
https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
Runtime
CR XI r2 (SP6) MSM
https://smpdl.sap-ag.de/~sapidp/012002523100000634042010E/crxir2sp6_net_mm.zip
CR XI r2 (SP6) MSI
https://smpdl.sap-ag.de/~sapidp/012002523100000633302010E/crxir2sp6_net_si.zip
See the following re. how to get to SP6 (depending on the SP you are using now...):
Crystal report access violation exception win 2008 server (.Net 2.0)
Note that on runtime computers, you must uninstall what ever the current runtime you have there now and install SP6 runtime.
2) See KB [1220516 - Font size decreases when report is exported to PDF from Crystal Reports XI or Crystal Reports XI Release 2|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233323330333533313336%7D.do]
3) Look at the option "Dissociate Formatting..." in the Page Setup properties and ensure this is not enabled.
4) Make sure your printer drivers are up to date and Unicode compliant
5) Make sure the font is "visible" to the process. If it is not, the CR engine will do it's own substitution...
- Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Line and paragraph spacing in pages 5.1

Line spacing in Pages 5.1 does not seem to be incremental any more and I cannot see how to adjust paragraph spacing at all. Any suggestions?? This is on a Mac using the

Thanks.
It is a layout problem that seems to be affecting most users.
There, but overlooked.
Hope the Apple programmers are paying attention.
I am really curious why they seem to be doing no independent testing and checking. At least none that shows.
Peter

Character styles in Pages 5

Can't find Character styles in Pages 5. After a couple of hours of work I am about ready to jump back to Microsoft Word, which annoys me beyond belief. At least Pages 09/11 had Character styles, AND hot keys for styles (even if they were limited to F-keys).
I use several different styles constantly through my documents, including character styles, and Pages 5 is letting me down BIG time.
OK, it's cool to have object styles - I can dig that.
BUT WHY ELIMINATE CHARACTER STYLES?
Sorry for shouting.
What a pity. Maybe the iWork software engineers don't actually work for Apple . . . yeah, that could be it. Or they don't actually USE the products they design.
I encourage everyone to make liberal use of Apple's feedback page, http://www.apple.com/feedback/

I posted this in another thread before I discovered this one:
I just upgraded to Pages 5.
I opened a document that I'd been working on in the previous version of Pages. It has several styles, incuding a bulleted list style called "main bullet".
I attempted to apply that style to a section of text, and while it did indent the text properly, it did not add bullets. (Also, in the Style panel a bullet does not appear next to the "main bullet" style as it does in Pages 4. This was my first clue that something was wrong.)
So I went back in the text to a bulleted list that uses the "main bullet" style. I selected the text, then went to the Style panel and chose "main bullet" > update style. This did not seem to help. The "main bullet" style still has no bullet next to it in the Style panel, and when I tried again to apply it to some text, the bullet doesn't appear.
I decided to try a different style, in this case "body". I went to a section that has the "main bullet" style, selected it, and applied "body". The indentation changed, but it did not remove the bullet as it was supposed to.
Is this a bug, or do styles work differently in Pages 5?
It appears that styles do not include formatting like bullets, which, if true, is a huge problem.
I was also upset to learn that once I've opened a document in Pages 5, I can no longer open it in Pages 4. So I'm essentially stuck with Pages 5 whether I like it or not.
Is anyone else noticing this?

Character Spacing Question

Hi There,
I work in print and we use our own GUI to create documents based on InDesign files, however the issue I'm having is that this one file has a font that uses -40 character spacing. I understand that these are in ems, so how would I go about translating that into mm which is what our GUI is using or can I change the settings in InDesign so that character spacing is shown in mm's or is that not how it works?
Any help would be greatly appreciated!
Kind Regards,
Matthew

The whole reason for using a relative unit, like ems, for tracking and kerning is it adjusts as you change the size of the type to maintain the specified spacing. If you switch to an absolute unit and adjust the type size your glyphs will either drift apart or pile up on each other.
And I don't think anyone here can even begin to tell you how you might accomplish such a feat in your custom GUI.

Character count on Pages iPad?

Hi to all i bought Pages to write mine review but I have found only the count of words and not for characters.
There is amethod to view them?
If not pls tell Apple to made it 'cose in journalism (in Italy) the news and alla other are order by number of character and no number of words.
IF y know ana App that do that pls tell me, txxx

Not sure if meanwhile you found a solution. Anyway, apparently there's support for character count in Pages:
http://www.rightnowintech.com/2011/11/more-word-count-options-in-pages-for.html
Ciao,
Marco

Character spacing URGENT

hi
i have to create a report that fils a pre-printed form with litle boxes (something like this)
|_|_|_|_|_|_|_|_|_|_|
with characters and numbers
i tried to use one field that covers all the boxes in one row but i can not manage to fit each character into one box.
I think that enlarging character spacing( a a a instead of aaa ) would solve the problem but i couldnt find a way to do this !
also if someone has any other sugestions the are very wellcomed
I am using oracle 10g on windows xp
thanks and regards
Rade Supica

hello,
this is a very tricky requirement. i have a feeling that this will not be too easy to overcome. in fact, if those pre-printed forms do not follow any regular character spacing it will be impossible to fit it exactly.
oracle reports does not provide any sophisticated character spacing manipulation beyond regular kerning as defined in the font definition of the OS.
regards,
ph.

Character spacing when print

Hi,
How can I set the character spacing when I printing?
eg. 10 CPI or 12 CPI etc. /CPI=Character Per Inch/
thx.

Hi,
How can I set the character spacing when I printing?
eg. 10 CPI or 12 CPI etc. /CPI=Character Per Inch/
thx.Printing on what? Console or a UI component?

Problem with Character spacing with RTF

I currently have this problem:
We have a RTF template, displaying a kind of sticker for our company including several lines of text (Company name, Service, Address, email, tel/fax, Internet website)
To mimic a justification, our users, who prepared the template, for each line of text in the sticker , formatted the text including character spacing (extended spacing of 3.1 pt, scale 100%,in Font Times size 10; extended spacing of 6.8 pt, scale 100%,in Font Times size 8; ...)
We save the template, reopen it for testing purposes: all is correct, nothing has been lost.
But when testing from BI Publish tool, using the RTF view for the template, or when testing in real conditions (fusion with Data, output format being RTF), all these formattings (characters psacing) have been lost.
Any idea?
Thanks

Hi Laurent
Can you post the template and data to the TAR.
Im double checking but I do not believe we currently support the character spacing you are setting through the font dialog.
tim

Textbox character spacing??

As i tried out the LiveCycle Designer ES i cant found the setting user to adjust the character spacing like what we do in word document, what i got is only the spacing above & below but that doesn't help. Is any tools or setting available in LiveCycle ES can make it happen?

Wrong forum.

JTextPane - character spacing

Hi,
i have implemented a new LabelView with character-spacing, but i have some problems with breaking the new, longer views. Which Method is responsible for calculating the spans the view has to fit? And which Method is responsible for calculating where the break occurs?
thx
kbj

Same problem too. We're using XML Publisher to print cheques and using the PDF Publisher Printer and we're finding problems with character spacing when the PDF is generated that didn't exist on the desktop.
Kofi

Character Spacing on Pages 05

Similar Messages

Maybe you are looking for