Characterisics combination-sales order error

Hi,
While editting the sales order I am getting the error message"Characteristics combination for item /000000 was not found".
Internal error: Item /000010(0001).
Please suggest.

Arnima,
Have you tried to create any changes to sales order Item configuration. In that case check VBAP - CUOBJ
or
If you are implementing Variant Configuration, or using configurable mateialin that case you will have to maintain
Characteristics in CT04
Classes in CL02
Configuration Profile CU41
Regards
Sathya

Similar Messages

How to exclude sales office for combination sales order type/division?

Hi experts,
I would appreciate if you could advise: How to exclude sales office for combination sales order type/division in ECC 6.0 ?

Hi
Standard SAP functionality would not be able to cater to this. Ideally create a Z table with sales order type and sales office combination. Put in entries for combinations that are allowed. In Sales order program MV45AFZZ use the exit USEREXIT_MOVE_FIELD_TO_VBAK. In this exit write down the logic passing the sales office determined and the order type and check if the entry is there or not. If the entry is there then it should go on to the next step. If it does not then pass an error message. You need to use the help of your ABAP er for this.
Thanks
Indranil

Combine sales orders of different division

Hi all,
I have issue where two sales orders are of different division and i want to combine the both sales order into one delivery document and make one invoice ,but delivery its not allowing me to do so,though copying requirements 051 exits,so SD experts help me out whaere i am going wrong.

Hi,
In order to combine sales order into one delivery you need to check whether following parameters are same in all the sales order that you want to combine
Ship to party
Shipping Point
Route
incoterms
delivery date
For creating single invoice for multiple deiiveries, following fields should be same
Payer
Billing Date
Payment Terms
Destination Country
If these fields are same in all sales orders then you can very well create single delivery for all the sales oder
Hope You get some idea
regards,
Sagar

When saving sales order Error determining local currency: ER type 'M' date

Hi experts
we have created new sales area for intercompany billing process. we are doing testing for this.
Update was terminated
after saviing sales order express document update was terminated received from author
sales order Error Info... M2 802: Error determining local currency: ER type 'M' date 02.08.2011.
i need your input
thanks

Dear Manoj Verma,
Check the pricing date of the sales order.
Check the valid from date for the currency types/exchange rate type M in OB08
Now check whether the pricing date in sales order is before the valid from date in OB08.
If so , make the valid from date in OB08 as the pricing date in sales order in OB08 and then save.
Thanks & Regards,
Hegal K Charles

Combine Sales Orders into one invoice.

05.11.2008
Hi friends,
My invoices are order related. When I try to combine Sales Orders they are split because of different Assignment No., Reference No., Different Partners, Division and Payment Reference. The Sales Orders have same Payer, Payment terms, Incoterm.
What should be the routine to combine Sales Order into a single invoice if the Sales Org, Distribution Channel, Sold to Party, Billing date is same irrespective of the other fields. Please advise/.
Regards,
Udaynath.

05.11.2008
Thanks Lakshmipathi for the reply. I tried this option, now split analysis shows the following :
"Split due to different header data
Combination criteria in the bi   00341A27110000931 00341A2711000932
Referenece document number 4600000363    4600000362
Payment reference                  4600000363    4600000362."
How do i avoid the split due to these.
Please advise.
Regards,
Udaynath

Message No V 0102 (Sales Order Error During Saving)

We are using SAP ECC 6 version and the client is related to Beverage Industry.
Problem:
The scenario is this that we created a Sales Order. In the Sales Order we have entered let say 20 items and the item have sub item as well. We are using BOM usage 5. Once the order is confirmed the user creates the Delivery Order but doesnt Post the Good Issue.
Now the requirement is that the user wants to change and delete some item in sales order.
For this first we amend the delivery order and then we change the sales order according the amendments made in Delivery Order.
In this scenario we also want to completely delete the Main item but as its default that the Bom item will be deleted with the main but we want to enter the sub item again in the order because its the process requirement.
Now when I make all the necessary changes in Delivery Order and Sales Order Respectively System saves the Delivery order with the changes values but gives an error message after Saving the Sales Order and doesnt update the Sales Order as well
Attached are the Screen Shot of Sales Order Error Screen.
Note: This Error comes randomly

Refer OSS 740280

Sales Order Error No customer master record exists for sold-to party

Hi,
I am trying to create a sales order in IDES. Unfortunately it is showing me error: No Customer master exists for sold to party. Now I have already checked my assignments, combined sales area in vor1 and vor2. Checked PDP ( In PDP I have creates partner functions as z2, z5, z6, z7). I have also checked in XD02 and XD03 and in partner function tab it shows as maintained. Please help as I am still not able to create it.

Dear Phanikumar,
I am not sure whether we can create a customer for a future date or not.
I might sound absurd but suggested this solution because I had faced a similar issue while I was working on a remotly supported IDES server which I was using for practice purpose.
Now the case was that, I had created some customers few days back, lets say on 01.03.2014 and today the administrator of the server changed the date & time of the system from 11.03.2014 to 11.03.2013 bymistake.
Hence when i was trying to create orders for a customer created on 01.03.2014 i was not able to do so as the system was throwing an error customer does not exist.
I am sorry if I have suggested something awkward or wrong, intention was to provide a solution.
Please correct if I have suggested someting wrong.
Thanks,
Kishor

Can't combine Sales Orders into One Delivery

A customer has started sending us 850's for their products. Each 850 creates a new Sales Order from the ORDERS IDoc.
We can not combine two different Sales Orders into one Delivery even if all the data is identical other than the Order Number itself. The Error Message is VL067.
The log reveals that the only data difference is the Address number. Each time a new Sales Order is built SAP creates a new Address Number even though the customer is the same, and then it won't let you combine those two Sales Orders into one Delivery because the Adderss Number is different.
We either need to make SAP stop creating a new Address for the same Customer, or we need to make SAP ignore the difference in Address Number when combining them into one Delivery.
Any ideas?

Hello Shiva,
My apologies - I am too focused and forgot to say thank you for your tip. I appreciate your time.
I have discovered that the address check is only made if the value of ADRDA in VBPA is B or E, which both mean that the address was manually entered - actually, it came in via IDoc.
Does anyone know how to control that value so it is not B or E?
Thanks in advance.

Unable to combine sales orders

Dear all,
I combined two sales oders, and completed PGI. After that i am doing billing document creation through VF01,order not combing. Threw split analysis i am getting the following error.
Spilt due to different header date : Field data - Credit data exchange rate value showing in sales order 1 - 0.000000 & in second order, 1.0000000.
Regs,
Ragu

Credit data exchange rate value showing in sales order
1 - 0.000000 & in second order, 1.0000000.
Ensure that on the date of sale orders created, exchange rate 1.00 was maintained in ob08. From your message, it seems the same is not maintained.
thanks
G. Lakshmipathi

Migo based on sales order error -Require CO object

Dear Experts,
We have one process,
Where we are creating sales order and based on sales order, we are doing migo and miro. final entry will be consumption a/c dr to vendor then we are doing billing for the same.
We got error in migo based on sales order stated that 'please enter co account assignment object.
where i will cpature this cost on sales order or cost center.
I think must be part of sales order becoz we are doing consumption based on sales order and revenue and csot must be flow to copa in billing. M i correct?
If cost object is sales order or PSG in migo? what setting need to be done for the same.
What will be the ideal process for the same.
regards
RR

hi ajay,
I have used AAC -X with item category 's' for third party that was suggested by sap
and the gl i have defined in okb9 with PSG tick.So consumption account linked to my PSG. becoz i m doing migo/miro based on sales order and final entry will be consumption a/c to vendor in my case.
System will determine PSG in migo and then billing will happened for the same.So my cost and revenue will flow to COPA.
We have one programme SDVPRSUPDATE that need to execute every monthend.In order to flow cost to COPA for some cases where Billing happened but no GR happened for the same.then this prograame will flow VPRS cost to COPA.
regards
RR

DTW - sale order error

hi all,
While uploading sale order through DTW,error message appears as below
Invalid total (RDR1.RG23Part2][Line:65] 'INR' Application defined or object-defined
oOrders.
Thanks,
With reagards,
A.Jeyakanthan
Edited by: Darius Heydarian on Jan 15, 2008 12:21 PM

hi all.
I checked with templates & removed line total,doc total from sale order line
template,but still same error message appears.
I have made entries in header fields like,record key,cardcode,docdate,NumAtcard,series
& row fields like record key,line number,item code,quanity,price,tax code.
Is there any thing mandtory to enter both in header & line templates ?
Is there any specific settings do with document settings in Admin module for
uploading sale order thru DTW ?
Thanks,
With regards,
A.Jeyakanthan

Sales Order Error Message 'Product does not exist in system'

Hi Gurus,
we recently upgraded from CRM 4 to 7.0. There is a ECC attached (which was also upgraded from 4.7 to 6.0 before).
Scenario: materials are replicatd from ECC to CRM. All mandatory customizing objects were initially loaded succesfully.
Because of the upgrade we already have "old" products in CRM. We requested a single product from ECC, the bdoc went through with green. The product can be found via commpr01 and also on database in comm_product. But when try to add the product to an sales order e.g. quotation, it gives the error message "product does not exist in the system.
We then tried to delete that product using the report com_product_delete_single. When entered the selection criteria for that report, we used the f4-valuehelp to enter the product. We found the product and then executed the report. But gives the message 'product not found'.
We also created a product for testing purposes directly in crm, but it shows the same behaviour in sales orders and for the deletion report.
Please help me with that issue. Your help will be highly appreciated!!!
Kind regards
Hannes

Solved with the help of SAP.
Keywords: COM_PRODUCT
COM_PRODUCT_GUID_GET_INTERNAL
CONVERSION_EXIT_PRID1_INPUT
CRM_ORDERADM_I 501
Relevant notes:
Note 1449146 - Dump While Creation IP via WebUI
Note 1445079 - Unable to add products to contract
The notes do not exactly described our issue but the code corrections were still relevent for us.

How to combine Sales orders and Billing

Can you help?
I have located extractors 2LIS_13_VDITM and 2LIS_13_VDHDR for Billing. I have located extractors 2LIS_11_VAITM and 2LIS_11_VAHDR for Sales Orders.
I need to combine the data for these 2 extractors for my reporting requirements.
My problem is:
In 2LIS_13_VDITM, we have the Sales Order number and Billing number.
2LIS_13_VDHDR has only Billing number.
2LIS_11_VAITM and 2LIS_11_VAHDR has only the Order number.
Can you advise how they can be combined so I have a DSO that contains all this data?
Any help would be appreciated and points assigned accordingly.

Hi,
I would suggest you to have a separate data targets for each of them and then combine everything using a MultiProvider.
Hope this helps.
PB

UNBW Material in a third-party Sales Order (error: account determination)

Hy @ll,
we receive the following error message when entering a non valuated material (MTART UNBW) in a third-party sales order item.
System is asking for the calculated budget and after the manual entry of the budget the following error message appears.
(the schedule line customizing populates the account assignment category X for the PR)
"Not possible to determine a consumption account".
any ideas? my assumption is that account determination OBYC can not be error source, because it´s a non-valuated material...
many thanks,.
Gregor

Please read OSS Note 95429 - MB01 for material type UNBW, third-party order
and
Note 83916 - Not possible to determine a consumption account

Sales order error

Hi All,
During creation of sales order I am getting an error as "Version 0 is not definedfor fiscal year 2007".
How to eradicate this error?
Thanks & regards,
Neelam

Hi Neelam,
Version 0 error
Please follow this path:
SPRO - > Controlling - > General Controlling - > Organization - > Maintain Versions
Select Version 0 and click on folder "Settings by fiscal year"
System will ask for controlling area input "CODA"
and also give version 0 and hit enter
you will get a list that displays year, select year 2007 and activate "Integrated Planning" and "copying allowed" and save it.
Note: This is a config change and better you do this with the assistance of a CO consultant.
Hope this will help you out !
Feel free to revert back with questions
Regards,
Syed Nasir

Characterisics combination-sales order error

Similar Messages

Maybe you are looking for