Characterist Value Propagation on Multi-Level

Hello All.
I need restrict a characteristic propagation on my multi-level scenary.
Anyone knows how do that?
In ECC works fine.
Version:
ECC 6.0
SCM 5.0
Best Regards
Marcelo

More Information..
The hierarchy is:
Finished Product > P1 -> P2 -> P3 - > Raw Material.
There is a PlOrd(R) in P3 material of 4500kg. But This order was created in  ECC6. When CIF creates the order, only 2 characteristics values was migrated. This is correct!!!.
Well, when i run MRP all characteristic value from the finished product migrated to lower level. Characteristics like packing.
The dependent demand of lower lever have 4 characteristics from Finished Product.
SCM see the PlOrd(R), but because this order has only 2 characteristics and depend demand has 4. SCM creates another PlOrder ie Surplus.
This is why i need to restrict the propagation of the characteristics.
Thank you and best regards.
Edited by: Marcelo Kayro Quintão on Mar 11, 2011 12:49 PM

Similar Messages

  • Characteristic Value comparison at query level

    HI,
    I have to identify the invoices as local or upcountry on the basis of below logic.
    if 0customer->region & country = 0plant->region & country then the invoice is considered as Local Otherwise it is Upcountry..
    How can i do this at query level ?
    If i do  the same at cube level then if a particular cusotmer's region or country is changed then that will not be reflected in the posted data.
    Any help will be appreciated.
    Thanks

    Hi,
    Use the replacement path to convet the characteristica and use it in formula and compare using IF statement.
    Regards,
    Jo

  • "Multi-level error propagation carried out" in SCM 5.0

    When I use the SNP PPM Generation With Lot Size Margin function in SCM 5.0, I got the following error:
    Multi-level error propagation carried out
    Message no. /SAPAPO/OM242
    Could you please give me this help?
    Thanks,
    Lian

    Hi,
    Thank you for the information, but the problem is still there though I de-activated all user-exits...
    I also saw the following error:
    Invalid planning version
    Message no. /SAPAPO/OM015
    Thanks,
    Lian

  • Multi-level error propagation carried out Error in APO

    Dear Experts,
    We had developed a custom program that is same as /sapapo/rrp3 report, but the issue is when we use planning version other then 000 the custom program is giving the error ""Multi-level error propagation carried out"" but the RRP3 report works fine with all the planning versions.
    Please help to find the cause and to solve the issue.
    Thanks.
    Regards
    Abhinav Nallani.

    Dear Arek,
          The problem is not yet resolved . we have raised an OSS note for the same.
    as the relevant notes are already implemented in our case.
    regards
    Kiran

  • Error "Multi-level error propagation carried out" when I run a report

    Hi All,
    When I run the report /SAPAPO/CDPS_REPT - Order and Resource Reporting with the below criteria I getting error "Multi-level error propagation carried out"
    Planning Version - Simulation Version XXX
    Evaluation Start - 05/03/2011
    Evaluation End - 12/31/2013
    Evaluation List - Extended Operation List
    I do not get error when I run the report with selection as Active version 000 and Evaluation List as Order List, Operation List.
    I have tried by ruuning Live cache consistancy check, but the issue is not fixed
    Please help me to resolve this issue
    Thanks & Regards,
    Rajkumar

    Hi Jack,
    Please do post the server log file here so that we can try and find a solution for the problem you are facing.
    I had a problem a while ago with the app server too. While trying to run an application, after a few times, it would give me an error message saying the Application Server cannot be started. I rebooted my machine and thankfully it worked again. Just try this too and see if it works.
    If it doesnt we can go through the server log and try to identify the cause of the problem.
    Cheers :-)

  • CIF error-Multi-level error propagation carried out

    Dear ALL,
        When i am trying activate the integration model for Material transfer it generates queue with status SYSFAIL with message "Multi-level error propagation carried out".
    and the integration model is not activated.
      please help
    regards
    Kiran

    Dear Arek,
          The problem is not yet resolved . we have raised an OSS note for the same.
    as the relevant notes are already implemented in our case.
    regards
    Kiran

  • Multi-level error propagation during the execution of CFM2 transaction

    Hi,
    We are implementing SAP SCM 5.0 integrated to SAP R/3 Mills IS.
    During the execution of CFM2  transaction, while  trying to activate the integration model for the object u201COrdersu201D for the very first time, the following error message appears:
    *"Multi-level error propagation carried out".*
    There are also messages related to inbound queues blocked. In the case of maintenance orders, CIF_MNT_INBOUND message shows up. While working with Production orders, CIF_ORDER_INBOUND message emerges.
    The items listed below should be taken into account:
    -The production orders that are meant to be transferred to APO are regular production orders corresponding to several products.
    -We are working with configurable materials.
    -We are working with the active model (000) and for each plant we are using 2 different planning versions.
    Regards,
    Analía Nahmías

    Dear Analía,
    The corresponding error messages issued when executing //CCR indiacted the peg-ids are missing in liveCache.
    Recommendations:                                                      
    -Run transaction /SAPAPO/OM17 to check the internal consistency between database and liveCache within SCM system. Correct the inconsistencies                                                       
    -Execute report /sapapo/cif_deltareport3 to correct the inconsistencies between ECC and SCM system                            
    Regards,
    Tibor

  • Release strategy determination for PO item level characteristic value

    Hi Experts
    I have user material group as release characterstic for PO.
    I have created two line items with two different material groups.
    How the release strategy determination occurs when the two different material groups are linked to two different strategies?
    regards
    ramSiva

    Hi,
    in this case system is NOT able to find the release startegy.
    Please take care of the following explanation (see note 365604)
    o  For OVERALL RELEASE (purchase order and purchase requisition) the
       item fields such as Plant and Material Group will be aggregated
       to header level.
       For example you use Plant/material group
    as one of your characteristics. If all
    items do not belong to the same plant/material group
    then
    *******the relase strategy will not be found***********
    unless you have maintained a blank value as one
    of your allowed values for the characteristic Plant/material group
    . If all items
    belong to the same plant7material group
    then that plant is aggregated to the
    header; if one or more is different then a blank is aggregated to
    the header.
    If you use an overall release strategy all
    characteristics which you have defined in the customizing (CEKKO-MATKL
    must have the same value. If one item has material class x and the
    other y the system does not know with which material class it should
    look for a release strategy. Now the system sets the material class
    to 'blank' and tries to find a release strategy. If you do not have
    defined a blank entry in the customizing (Transaction: OMGS
    : OLME >release procedure for PO > rel. strategy ) the
    system won't find a release strategy.
    you need
    to add a blank value to your allowed characteristic values in your
    release strategy.  To do this you can define a blank value in your
    characteristic (CT04).  On the values screen leave the char.value
    blank and add a description and save.  Now in OMGS you can select
    this value as an allowed value for the characteristic.
    (Example:
    To avoid this you can do the following:
    - go into transaction CT04
    - enter the characteristic 'CEKKO-MATKL'
    - click on the tab 'values'
    - set a flag in 'additional values'
    - in the column 'Char. value' do not enter anything
    - in the column 'Description' enter a text like 'no material class'
    - save this setting
    Now
    - go into transaction OMGS -> button 'release strategy'
    -> button 'classification'
    - double click on CEKKO-MATKL' and set a flag in 'no material class' )
    Please also have a look into the attached note 365604 point  2d).
    BR
    Nadia Orlandi

  • SCM Don't consider PrdOrd(R) using Multi-Level/Cover Dependents  Req.

    Hello all.
    My scenary:
    Multi-level product with characteristics. Example: Finished
    Product>Intermediary 1>Intermediary 2>RAW Material.
    In Intermediary2 has a PlOrd(R) scheduled to 28.08.2011.
    In Finished Product there is a Sales Order to 07.07.2011.
    I ran MRP and DepDMD was created. PlOrd was created too because we using
    "Cover Dependent Requirements Immediately".
    When SCM reachs Intermediary 2(Where had a PLOrd(R)) he creates another
    PlOrd.
    All Characteristic is correct(if you compare PlOrd/Planned Order/Sales Order) and if a run MRP only in this level works fine. Only don't work if came from Finished Product to this level.
    Until now, i think the problem is with dates. Possibily SCM creates another order if has capacity and the PlOrd(R) is in future.
    Anyone has any clue of this issue?
    Best Regards.
    Marcelo

    Hi,
    as I can see the ProdOrd is late. so the system will create a new planned order.
    You can prevent this by customizing:
    Maintain Planning Procedures
    Reaction to Events
    Action Carried Out by PP When an Event Occurs
    Cover dependent/stock transfer requirements immediately with existing receipts
    Then the system uses the ProdOrd.
    But if there is no receipt for the dependent demand  the system will never create a new receipt.
    The other option is of course to increase the Alert Threshold for Lateness in the Product Master.
    Then the net requirement will find the late production order and does not propose a new order.
    When you also want to see the peg in the product view enter the same value for lateness in Maximum Lateness of a Receipt field.
    BR Frank
    Edited by: Frank Horlacher on Jul 22, 2011 2:09 PM

  • Slow dataload into Infocube- Conversion of Characteristic values to SIDs

    Hi All,
    we are facing a slow delta load issue when loading from a DSO into an InfoCube ( approx 150,000 recs).
    After checking the monitor found that
    - The Conversion of Characteristic values to SIDs is taking time
    - The Start Routine time is real quick ( in secs)
    The underlying DSO is hugh and there is no SIDs Generation upon Activation flag set for it
    Master data is loaded first and than we are loading the transaction data.
    i've tried refreshing the stats of the Cube, Reduce the size of the data package,
    Deletion of Indexes than Loading and recreation of Indexes, no joy at all.
    Any comments and recommendations are much appreciated.
    Thanks,
    Natalie

    Hi Natalie,
    The problem for your slow delta load from DSO to cube is because the SIDs Generation upon Activation flag is unchecked at DSO level .
    Becasue of which your activation is faster but your loading from DSO to cube will be slower as you only mentioned that SIDs are being generated .
    One recommendation will be to switch on the property of the DSO SIDs Generation upon Activation flag .
    Are there any secondary indexes also in DSO ?
    You can try deleting them also during loading the data from DSO to cube .
    I guess your change log table is also huge in this case . If possible we can think of deleting the log table also . Then for the new records let it get filled .
    Hope the above reply was helpful.
    Regards,
    Ashutosh Singh .
    Edited by: DEADLOCKS on Apr 21, 2011 5:08 PM

  • Conversion of Characteristic Values to SIDs. Load Very slow

    Hi Experts,
                     We have a slow load issue when loading from a Write-Optimized DSO into an InfoCube. 8 millon recs in 10 hours.
    We check the start, end, and rules routines and every is ok but for all the package the load was very slow in the Conversion of Characteristic Values to SIDs.
    Can any help me with this?
    Thanks a lot,
    Alejandro

    Hi,
    It is because the SIDs Generation upon Activation flag is unchecked at DSO level .
    One recommendation will be to switch on the property of the DSO SIDs Generation upon Activation flag .
    Are there any secondary indexes also in DSO ?
    You can try deleting them also during loading the data from DSO to cube .
    Also load your master data first and activate it before loading it to cube.
    Thanks,

  • Multi level attribute form LDAP

    multi level attribute form LDAP
    I am trying to write an custom mapping to use to retrieve a value from a multialued field in LDAP (nsRole). Has anyone done this before?
    Rigth now all my mappings are 1:1. However the goal is to get a 1 : M and parse thru it till i get the desied value (1:1)

    Darwin Hammons - Assurant 
    2:44pm, May 17 
    Great conversation. I have a very similar question about the use of the custom JAVA mappings with the LDAP Login process. I want to include an additional (event) step in the login process. Does anyone have an example or experience with a custom Java Class mapping that can use an LDAP attribute (location)  queriing the data to execute an event that populates an RequestCenter OU or Group if the person login location equal say " Argentina" ? Looking for a way to manage / build catalog entitlements during login. Suggestions ?
    Great conversation. I have a very similar question about the use of the custom JAVA mappings with the LDAP Login process. I want to include an additional (event) step in the login process. Does anyone have an example or experience with a custom Java Class mapping that can use an LDAP attribute (location)  queriing the data to execute an event that populates an RequestCenter OU or Group if the person login location equal say " Argentina" ? Looking for a way to manage / build catalog entitlements during login. Suggestions ?
    Anthony Erickson
    2:52pm, May 18  
    Hi Darwin,
    We're about to embark on a piece of work with newScale which would be similar to this to support our Multilingual catalogue.  I'll provide any updates I'm able. 
    Thanks,
    Ant 
    Darwin Hammons - Assurant 
    3:25pm, May 18 
    Great, Thanks Anthony ! I hope our bringing up this topic will spark a bit of interest. The Custom Java Mapping  / Directory integration is documented more with RC 9.1. It will be good to hear more about your project and use of Java mappings with LDAP Directories. 

  • Characteristic value '5000000000 ' of characteristic 0MATERIAL is not MATN1

    Dear Experts,
                          I am getting one error message while extraction,when executing the DTP .the messge is :
    "Characteristic value '5000000000 ' of characteristic 0MATERIAL is not MATN1 -converted"     BRAIN     68          @3R@
    what is the meaning of this messege ,Request you to plese suggest me reagarding the same .thanks in advance .

    Hi Bhullar,
    Have you maintained material length as 18 at ECC and BW sides.
    at bw side info object 0material conversion routine as MATN1. seems like you may be maintained as ALPHA. if your using as ALPHA conversion routine then at transfer rules for MATERIAL you can pass output data by suing FM - CONVERSION_EXIT_ALPHA_INPUT.
    or if possible then change conversion routine to MATN1 for material(info obj) at data source level or info object maintenance(RSD1) level.
    Thanks

  • Characteristic Value Assignment in Sales order

    Hi Pals,
    I am using the Variant configuration scenario in the sales order. My problem is, when ever i try creating a new sales order and enter a material, it suppose to display the Characteristic Value Assignment screen but for me it is showing the "Display Characteristic Values" Screen. Because of this i am unable to enter the data at the sales order level. what might be the problem for this case.
    Kindly help me out in this issue.
    Thanks & Regards,
    Srinivas.D

    Dear,
    I hope the following link will help u in giving a good understanding of Characteristic values
    help.sap.com/printdocu/core/Print46c/en/data/pdf/CACLCHR/CACLCHR.pdf
    Regards,
    R.brahmankar

  • Copy characteristic value(class 023 ) from the material master to the batch

    Dear All,
    Is there a way to copy the characteristic value (class 123) from material master to the batch master automatically once we create a batch of that material
    I tried to create a dependency, but didnu2019t know what to write in the dependency editor
    Please advise

    I dont know if its possible in standard,  you can try and create a reference batch, and use the below user exit I found in SAP library :
    Set Up Customer Exit for Determining Source Batch
    You can use function module exit EXIT_SAPLV01Z_011 in SAP enhancement SAPLV1ZN when assigning characteristic values to batches. You use this to specify a reference batch when creating a new batch with the central function module VB_CREATE_BATCH.
    Further notes
    The reference batch must always be specified completely. This means the reference material, source batch and reference plant details must have been entered if the batch is determined at plant level.
    All batch master data is copied. If the batch is classified in this enhancement, the values assigned to the corresponding characteristics are copied.
    In the exit, you can use a communication structure with the application data for the respective business transaction (for example, plant or material type). If you require further information, you must obtain it yourself in one of the user exits (such as time, user name, or date, for example).

Maybe you are looking for