Characteristic error:BAPI_ACC_DOCUMNET_POST to post entries in FB50

Hi,
I am using BAPI_ACC_DOCUMNET_POST to post entries in FB50 for COPA and Non COPA .Initially I was getting some errors and I changed the object type from BKPFF TO fkksu.The errors changed and I got error for Curr type .Then I filled the Curr type as well.
Now I am getting an error Saying that "Characteristic value 100 does not exist for characteristic WWAFD (Arla Foods Division) ".
Please guide me if I am doing anything wrong and what is the cause and solution of this error.
Anticipating an early reply
Regards,
Abhi

Hi,
Please check tcode KEA5 for char WWALD. You will see a check table. See if the value 100 exists in the check table. The purpose of a check table is to ensure that any value you post to a char is contained in the check table else error KE0C133 will be issued.
regards
Waman

Similar Messages

Getting error msg while posting entry in GL using F-02

Hi gurus,
While i am posting entry in GL using F-02 getting error message as "no controlling area has been assigned to company code"
can any help me out at the stage i dint want to configure co settings is there any way to pass the entries
Thanks & regards
Nandini

Hi Nandini,
Have you defined a GL account as a cost element? I think you have multiple company codes which are using same chart of accounts and this company code is also using the same chart of accounts. And also you have configured single controlling area for all company codes. Even though you have not assigned this company code to controlling area. The cost elements will create at controlling area level.
Due to this system is throwing error message.
Please check and let us know if you have other issue.
Regards,
Mukthar

Add comment error - can't post entries to blog

I helped my daughter create a website with a blog page for a school project. I've used the iWeb inspector to allow comments and images. It worked during an early publish to but the add comment no longer works. A box opens now that reads "This entry no longer exists. The entry may have been moved or deleted." Her project is now due for school and the blog won't work. Any help would be appreciated. I am posting via .Mac.

The error occurs when accessing the site via the web. Site access is fine and all pages but the blog work. I haven't been doing the captial W, but I would think that would just keep me from finding the site - I'll try it though. On the post-publish comment, I've certainly updated the site as it was built. So if I change the website at all and re-publish, it disables commenting? Can I get commenting back or do I have to build the site from scratch? Thanks.

ERROR IN MIRO POSTING ENTRIES WITH CENVAT CLEARING ACCOUNT

Hi,
          I'm facing a problem while posting in MIRO, instead of CENVAT clearing account RG23A BED acocount is getting debited, here I'm giving you the screen shots for MIGO and MIRO accounting entries please assist me with some customizing tips.
   MIGO
   MIRO
material : TEST MAT
vendor   : LAKSHMI GROUP
I've assigned 154001 G/L ac for RG23A BED and 191101 G/L for MODVAT clearing ac.
Thanks and Regards,
Sairam.

Hi Shiva,
      thanks for your response as you said in std cenvat ac get debited but as you can see in that above screen shots of my accounting entries RG23ABED ac is getting debited what actually wrong. How can correct the wrong entries please suggest me some solution here I'm sharing the screen shot of Tax on Goods Movements-->Account Determination-->Specify Excise Accounts per Excise Transaction
please ask me for more information if you don't get my point on this problem
Thanks in advance,
Sairam

FB50 Error : Can't Post to mat.account using overhead cost centre ...

Dear Colleagues,
Users have come up wth this error message when trying to post journals on FB50.
Where should I be looking at to change customisation in IMG?I think there is a validation rule somewhere set in IMG but not sure where?
All help is appreciated.
PAPJ1.

HI,
check the validation rules active in your comp. code using T-code OB28.
It looks like this own defined message is triggered by a validation step.
Best regards, Christian

I downloaded the latest version of itunes. Now I cannot open iTunes. I receive this error message: The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll. Thoughts?

I downloaded the latest version of iTunes on my PC. Now I cannot open iTunes. I receive the following error message: "The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll" After pressing the "OK" button I receive a second error message: 'iTunes not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)". I've uninstalled iTunes and reinstalled to no avail. I've also eliminated the temp files (per suggestions on the trouble-shooting page) and no luck. I also tried system restore and that did not fix the problem. Any thougths on a repair?

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a

Account Determination error during MIGO Posting

Dear All,
Kindly help resolve error duirng MIGO posting "ACCOUNT DETERMINATION FOR ENTRY GBB____ZOB TF01 not possible". This is Message no. M8 147.
The error happens once the transaction is being saved.
Hoping for your positive response.
Thanks and regards,
ching

Hi,
Goto OBYC Transaction.
Select the Procedure as ' GBB" and enter the Chart of Accounts ( for Your Company code)
Enter the Valuation modifier as assigned to others.
Enter the General modifier as ZOB
Enter the Valuation class ( with respect ROH/SFG others)
Enter the Debit/ Credit G/L account
save then proceed your transaction MIGO.
rgds
Chidanand

I just tried updating to iTunes 10.7 on my pc and when I try to launch it I get this error message-The procedure entry point AVCFPlayerSetDirect3DDevice could not be located in the dynamic library AVFoundationCF.dll. Any Ideas?

I just tried updating to iTunes 10.7 and when I try to launch it I get this error message-The procedure entry point AVCFPlayerSetDirect3DDevice could not be located in the dynamic library AVFoundationCF.dll. Them it tells me to re-install iTunes and the same thing happens again. Any Ideas?

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Recently tried to update iTunes 12.0.1 and got this error message: The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library iAdCore.dll.

I recently tried to update iTunes to 12.0.1 and got this error message:
The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library iAdCore.dll.
After that, I get: iTunes did not install properly. Reinstall iTunes.
I tried downloading iTunes again (without uninstalling it) and it won't download.
Any suggestions?

Thanks so very much, I have been looking for an answer to this for
almost a week and just thought i'd look again and in 2 minutes my iTunes opened YIPPEE
I must have installed deleted everything in order at least 15 times
Is there anyways this cane get pinned to stay at top as it works and save people ploughing
through post after post which is just asking the same question.
Off to back up and I Cloud back up and see how it works without sidebar
again thank you

Asset posting entry

Hi,
Iam trying posting entry using f-90,but showing an error message .
System response
In the standard system, the system rejects the posting to the asset and issues an error message. However, this error message can be changed in Customizing so that it is only a warning. However, if you make this change, you should be aware that it is then possible to post to the asset, although an additional account assignment is missing.
Procedure
Start report RAUNVA00 for the asset, and complete the asset's specifications. Then post the transaction again.
How to resolve this issue.
Regards,
uday

Hi,
If master data is incorrect for an asset, this error occurs.
Execute AUVA (RAUNVA00 ), which will give you list of incomplete data of asset master. After correcting the same, you can post thru F-90.
Best Regards,
Madhu

In MB1C im getting error-"Check table T004F: entry G006 does not exist"

DEAR SIR,
WHILE DOING MB1C IN MOVEMENT TYPE 561 I M GETTING THI ERROR -Check table T004F: entry G006 does not exist.
PLZ HELP ME HOW TO SOLVE THIS PROBLEM.
THXS AND REGARDS,
DEBESH TRIPATHY

Check these threads
[Check table T004f: Entry G006 Does not exist |Check table T004f: Entry G006 Does not exist]
[Posting Material |Re: Posting Material]
[Error in MBIC|Error in MBIC]
thanks
G. Lakshmipathi

Reverse GR error:Account determination for entry GCOA...not possible

Hi!
If we encounter the error Account determination for entry GCOA PRD 0002 ___ ZRO1 not possible when reversing GR, does this have something to do with the number of available stocks of the materials?
In our other servers, the transaction key PRD is blank. but we ca reverse GRs.. but in our production server, PRD is also blank but we cannot reverse the GR. The error Account determination for entry GCOA PRD 0002 ___ ZRO1 not possible comes up.
What could be the reason for this?
Appreciate your help..thanks so much!
Regards,
Paula

Please specify below:
1. what's the price control for problem material? S or V? And what's the price unit?
Price control is V, price unit is PC
There is no change in PO price.. the price is 40.
2. what's the movement type for the material document posted? What's the quantity
in the material document?
mvt type in GR is 101.. PO qty is 3996 pc and GR qty is 3996 pc.
3. what's the accounting doucment posted during the goods movement. Please list all the lines
in FI document with transaction key information(BSX/WRX...)
89 - BSX
96- WRX
4. what's the current stock/stock value for the problem material, i.e. the stock/stock value before
posting the GR reversal?
current stock is 6,383.000 pc
GR reversal has not been done yet...
Thanks so much for your time..
Regards,
Paula

Error:Account determination for entry 1000 KBS 0001 not possible

Hi all,
i created one project PO account assignment category Q ,with out master data ,material text , material group , i entered W.B.S ,
P.O . created ,while doing GR , i am getting following error Account determination for entry 1000 KBS 0001 not possible
regards
vijju

Dear Viju,
                                                                                The error M8 147(Account determination for entry XXX KBS
not possible)is because of the corresponding entry mismatch in T030
table .For resolving this we need to make a corresponding entry in
transaction OBYC (the menu path in SPRO is as follows)
Materials Management
-> Valuation and Account Assignment
   -> Account Determination
      -> Account Determination Without Wizard
         -> Configure Automatic Postings
Please also review
Note 364570 M8147,KBS posting when assigning accnt to GR for PO
Regards
V V

ERROR IN WHT POSTING

dear WHT experts,
I got the error when I post the Invoice with WHT that
The WHT amount exceeds the Vendor/Customer line items amount 0001
Pl can any body give me the solution for above issue
Rgds,
VR

hi Venkat,
When uare posting the entris in F-43, please check in FS00 that u have assiged the TAX Code to the GL account that u are assigning then only it will calculate the Tax.
Is that what u need ?
if not.....
ranjit

Error in FI posting in J1IV

Dear Sir,
I am sending some reject material to vendor.
1. i did returen delivery material document created by MIGO with 122
2. I complete J1IS and post J1IV .
but user enter wrong entry in J1IS so--
1. i cancel perticular excise invoice by J1IS.
2. i cancel material document created by MIGO with 123    (reversel of 122)
3. and again i did returen delivery material document created by MIGO with 122
4. i created new returen excise with J1IS.
now if i am doing J1IV then i facing below error-
"Error in FI Posting"
     Message no. 8I280
please give me solution ASAP.
Thanx in advance
Anurag

Dear sir,
thanx for reply
i tried FB08 and give input document no. and there also is coming error-
"Not possible to reverse the document in financial accounting"
     Message no. F5673
please guid me to slve this issue.

Characteristic error:BAPI_ACC_DOCUMNET_POST to post entries in FB50

Similar Messages

Maybe you are looking for