Characteristic is blocked by conversion (status 4)

Dear all,
There is a infoobject had many nav attributes,and much data in master data table.
And then,i change nav attributes from time-dependent to notime-dependent.
when i active it, there was error,and is blocked by conversion.
So, status of the char is inactive, not executable.
I Delete lock in SM12 ,and it didn't help. Locks appear again.
error message shows the following:
Internal Activation (InfoObject )
Preprocessing / Creation of DDIC Objects for InfoObject ZCO_ELMNT
Characteristic ZCO_ELMNT : Converting the Master Data Tables
Table /BIC/PZCO_ELMNT: Error in creating index 0 (2)
Resetting of Incorrect Objects Back to the Active Version (InfoObject )
Preprocessing / Creation of DDIC Objects for InfoObject ZCO_ELMNT
Characteristic ZCO_ELMNT is blocked by conversion
How to active the IO,or delete the block from IO?
Best regards,
Plato

I was facing this problem in bi 7.0 . the object can be unlocked by using TCODE RSA1OLD.
Go to RSA1OLD.
Double click on the object.
then from menu, choose EXTRAS->REMOVE CONVERSION LOCK.
This will remove the lock and will allow you to change the object.
Change, save and activate the object. (You can skip this and can do from RSA1 also, just remove lock in this case)
Change and save the object from here and come out of your all transactions. (Log Off from system)
Now, as you have changed the object from RSA1OLD T-Code , it might not be type compatible for RSA1.
So, go to RSA1, you will find that object unlocked. Change the same object (For sake of formality) and save and activate the object.
This will create the active version of object in RSA1.
Your problem is solved now.
Hope this will work for you.

Similar Messages

Characteristic 0BPARTNER is blocked by conversion(Status 6)

Hi
I have added added 3 attributes to 0bparnter while activating error came.i removed 2 atributes and activated againg i got error :Characteristic 0BPARTNER is blocked by conversion(Status 6) .infoobject has data which loading from crm.i found sapnote_0000325296 can i apply.do i need delete data or without also possible to apply this note.

Hello,
Adding an attribute should not be a problem in any infoobject.
You can delete the data from the infoobject if its not used in any cube or if the cubes where its used are not loaded or contains no data.
Otherwise you will have to delete the data from the cubes first and then from infoobject.
This will allow you to change the infoobject.
Even the OSS notes looks old one..so just do a verification if its already applied or not.
Regards
Ajeet

"Characteristic is blocked by conversion" -- "No Nametab Exist"

Hi all,
I have a serious problem. I have an infoobject with master data time dependent. I have switched one field from "Time-Dependent" to "not Time Dependent". In development environment no problem arises.
When transporting in quality environment, the Change request goes in Red with following message:
Table /BI0/PXXX: Error in creating index 0 (2)
Characteristic 0XXX is blocked by conversion
I check in quality and I see that the /BI0/QXXX table is not active. When I try to activate it, the following error message appears:
No active nametab exists for /BI0/QXXX
Termination due to inconsistencies
Table /BI0/QXXX (Statements could not be generated)
Any ideas?
Thanks,
Gianluca

OSS Note 211492

Transport Error: Characteristic is blocked by conversion

Hello Everyone,
I had created an Info Object in my development system with some attributes and also compounded with certain other IO. After loading it, I transported it to Quality.
Then I modified the Info Object in development system by adding some navigational attributes and some more compounding. I loaded it again, tested it and then transported it. But it is giving an error now. The log says " The conversion of master data tables from characteristic ZABC is not completed. Characteristic ZABC can not be changed until this conversion has been successfully carried out."
Steps I did to resolve the issue:
1) Deleted the data from Q. Adjusted the tables using SE14 in Q. Collected the object in a new request and transported it again. It dint work.
2) I checked the consistency of tables for this Info Object using SE14. Everything was consistent. There is a SAP Note that talks about this issue: 1248769. But for that I need Basis support.
Why am I facing this problem? Is there a consistent way to solve the issue because this might happen with any info object as we keep modifying the info object's over period of time.
Regards,
Abhishek

It may be because of conversion lock in the characterstic. You can check it in "Extras --> Remove conversion lock" in the characterstic.

Characteristic 0MATERIAL is blocked by conversion

Hi experts,
I am transporting the 0MATERIAL changes into production (after extra navigational attribute added), while importing into production system, its giving below error message.
Characteristic 0MATERIAL is blocked by conversion
the new navigational attribute is active in production system.
how to resolve this issue?
regards
venuscm

Hi,
Kindly review this SAP Note 1177708 - CHECK: Change time-dependent attribute to time-independent
For existing data, a time-dependent attribute can only be changed to time-independent if there is exactly one attribute value for each characteristic value in the existing data. Even though there are several attribute values, the check may in some cases report values to be unique. However, the characteristic activation terminates. The subsequent inconsistent state can be cleared only manually.
Please also read & follow the recommendations in SAP Notes:
325296 Conversion lock: Characteristics cannot be edited
451773 Inactive characteristic cannot be activated (inact.
Rgds,
Colum

Characteristic ZEMPLYETD is blocked by conversion

hi
i am geting this error while activating of time depandant of employee. ple let em know
Characteristic ZEMPLYETD is blocked by conversion

Hi,
check below link,
R7476 - Characteristic OMATERIAL is blocked by conversion
Regards,
Viren

Characteristic USITMMPE is blocked by conversion

I tried to activate an InfoObject and I got:
Characteristic USITMMPE is blocked by conversion. Now I am unable to make any change to this InfoObject. How to unblocked it? Thanks.

Did you change the data type/DDIC for the info-objects. If yes, then delete the data first before acitvating it
refer: info object activation problem

Characteristic Infoobject is blocked by conversion

Dear All,
Getting message as(Characteristic Infoobject is blocked by conversion).
Unable to activate the infoobject.
Does anybody faced the issue before.
Thanks.

Did you change the data type/DDIC for the info-objects. If yes, then delete the data first before acitvating it
refer: info object activation problem

Characteristic 0BPARTNER is blocked by conversion

Hello,
I´m trying to activate 0BPARTNER characteristic but it is blocked by conversion. System sais that problem will be solved activating 0BPARTNER but it is impossible to do it:
Message no. R7476
Diagnosis
The conversion of master data tables from characteristic 0BPARTNER is not completed.
System Response
Characteristic 0BPARTNER can not be changed until this conversion has been successfully carried out.
Procedure
Activate characteristic 0BPARTNER. The block will be removed following a successful activation.
But I can´t activate it.
Best regards,
Carmen

I had a colleague reinstall the object from BCT- additionally he also activated a few related datasources in R/3 (RSA5) and then activated 0BPARTNER and it was successful!!
I guess I was facing some authorization glitches due to the recent upgrade to 2004s- note that my colleague and I have the same authorizations- and the exact above steps did not work for me but worked for him!
But thanks all for your valuable suggestions and interest in this thread.
This issues is now closed.
regards
Naresh

Characteristic 0EMPLOYEE is blocked by conversion

Hi Gurus.
I added 2 Attributes to 0EMPLOYEE infoobject and made them navigational. Now, when I try to activate 0EMPLOYEE it times out and I get this message when I come and try to enter edit mode for 0EMPLOYEE:
Characteristic 0EMPLOYEE is blocked by conversion
Message no. R7476
Diagnosis
The conversion of master data tables from characteristic 0EMPLOYEE is not completed.
System Response
Characteristic 0EMPLOYEE can not be changed until this conversion has been successfully carried out.
Procedure
Activate characteristic 0EMPLOYEE. The block will be removed following a successful activation.

Hi Dinah,
Yes, I was able to fix this.
You need to do the following. In BW, go to tcode SE14 (ABAP Dictionary: Database Utility). Enter the table name that is causing the problem in the Obj. name field. In my case that was the SID table, e.g. /BIC/YEMPLOYEE. You can display all the infoobject tables by typing in EMPLOYEE (your InfoObject name) and F4 for lookup.
Once you type in the correct table name, click on Edit button. On another screen, click on Delete data radio button. Then do an Activate and adjust database. If that does not fix it ..also ..come back and click on Delete database table button.
Hope this helps.
Thanks

Characteristic 0TCTUSERNM is blocked by conversion

Dear All,
I am trying to activate the infoobject 0TCTUSERNM but it is giving error as below,
Characteristic 0TCTUSERNM is blocked by conversion
Message no. R7476
Diagnosis
The conversion of master data tables from characteristic 0TCTUSERNM is not completed.
System Response
Characteristic 0TCTUSERNM can not be changed until this conversion has been successfully carried out.
Procedure
Activate characteristic 0TCTUSERNM. The block will be removed following a successful activation.
When I activate the infoobject, it is giving short dump.
Does anyone have faced such issues?
I tried force conversion in SE14 and also tried to activate and adjust tables in SE14 for this infoobject. It didn't helped.
Any pointers to solve the issue will be helpful.
Regards,
Niraj

Hi,
I tried both the options suggested by you. Deleted the table from SE14 and adjust and activate. The issue did not resolved.
i tried activation in background and job was getting cancelled.
To solve the issue I went to infoobject> Extras>Remove conversion lock
it gace a warning and then activated manually.
Thanks for all the suggestions.
Regards,
Niraj

0Material is blocked by conversion when transporting from Dev to quality Bo

Hi All,
I am transporting omaterial , I had selected with data flow before option while creating the transport request , when importing the request i am getting the following error in the quality box" 0Material is blocked by conversion "i had already transported the table view ( t ocde osml)
Please guide me to resolve this issue .
thanks in Advance
suitable answer will be awarded

Hi Krishna,
Goto SE14, Give all the relevant tables one by one and Delete data and acivate.
1. SE14
2. Eneter table like /BI0/PMATERAL
3. On the next screen select the option Delete Data and Activate.
4. Repeat step 1 to 3 for all the other tables.
To find out all the tables:
1. Goto Se14
2. /B10/*Materal
3. press F4.
Hope this helps.
best regards,
Kazmi

Error In InfoObject Activation - Characterstic Blocked By Conversion

When I am going to Activate 0APO_PROD the error message is
1. The SID table for 0APO_PROD cannot be filled
2. The InfoObject 0APO_PROD is Blocked by Conversion.

Hi
just on trial basis u can try tcode se14 delte the sid table recreate it and then activate the infoobject
thanks
puneet

HELP! files stuck in conversion status

Can anyone help?
Files that we have attempted to convert to pdf. are locked
in conversion status. These are single page items that normally
take just minutes. Now they have been there for days. Why are they
stuck? How do we end the process and start again?
Bilinguistics

Hi Sheila ,
We'd like to help you out with what you're experiencing.
Can you give us more information?
What is the error message that you get?
What types of files are they?
Is this happening with other files?
Have you narrowed it down to a specific file or files?
Are you doing this directly with the Acrobat.com interface?
Thanks!

[Solved]TCP connection blocked in SYN_SENT status

I set up openssh daemon on my host and try to ssh to localhost to ensure it working. However the connection blocked for minutes then get
ssh: connect to host localhost port 22: Connection timed out
I checked "netstat -antup" output, the daemon was started and the new connection was in SYN_SENT status before time out
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN -
tcp 0 1 127.0.0.1:38127 127.0.0.1:22 SYN_SENT -
I did not add any iptables rules on my host, here is the log of sysctl net.ipv4
net.ipv4.tcp_timestamps = 1
net.ipv4.tcp_window_scaling = 1
net.ipv4.tcp_sack = 1
net.ipv4.tcp_retrans_collapse = 1
net.ipv4.ip_forward = 0
net.ipv4.ip_default_ttl = 64
net.ipv4.ip_no_pmtu_disc = 0
net.ipv4.ip_nonlocal_bind = 0
net.ipv4.tcp_syn_retries = 5
net.ipv4.tcp_synack_retries = 5
net.ipv4.tcp_max_orphans = 16384
net.ipv4.tcp_max_tw_buckets = 180000
net.ipv4.ipfrag_high_thresh = 262144
net.ipv4.ipfrag_low_thresh = 196608
net.ipv4.ip_dynaddr = 0
net.ipv4.ipfrag_time = 30
net.ipv4.tcp_keepalive_time = 7200
net.ipv4.tcp_keepalive_probes = 9
net.ipv4.tcp_keepalive_intvl = 75
net.ipv4.tcp_retries1 = 3
net.ipv4.tcp_retries2 = 15
net.ipv4.tcp_fin_timeout = 60
net.ipv4.tcp_syncookies = 0
net.ipv4.tcp_tw_recycle = 0
net.ipv4.tcp_abort_on_overflow = 0
net.ipv4.tcp_stdurg = 0
net.ipv4.tcp_rfc1337 = 0
net.ipv4.tcp_max_syn_backlog = 1024
net.ipv4.ip_local_port_range = 32768 61000
net.ipv4.icmp_echo_ignore_all = 0
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.icmp_ignore_bogus_error_responses = 1
net.ipv4.icmp_errors_use_inbound_ifaddr = 0
error: permission denied on key 'net.ipv4.route.flush'
net.ipv4.route.min_delay = 2
net.ipv4.route.max_delay = 10
net.ipv4.route.gc_thresh = 4096
net.ipv4.route.max_size = 65536
net.ipv4.route.gc_min_interval = 0
net.ipv4.route.gc_min_interval_ms = 500
net.ipv4.route.gc_timeout = 300
net.ipv4.route.gc_interval = 60
net.ipv4.route.redirect_load = 5
net.ipv4.route.redirect_number = 9
net.ipv4.route.redirect_silence = 5120
net.ipv4.route.error_cost = 250
net.ipv4.route.error_burst = 1250
net.ipv4.route.gc_elasticity = 8
net.ipv4.route.mtu_expires = 600
net.ipv4.route.min_pmtu = 552
net.ipv4.route.min_adv_mss = 256
net.ipv4.route.secret_interval = 600
net.ipv4.igmp_max_memberships = 20
net.ipv4.igmp_max_msf = 10
net.ipv4.inet_peer_threshold = 65664
net.ipv4.inet_peer_minttl = 120
net.ipv4.inet_peer_maxttl = 600
net.ipv4.inet_peer_gc_mintime = 10
net.ipv4.inet_peer_gc_maxtime = 120
net.ipv4.tcp_orphan_retries = 0
net.ipv4.tcp_fack = 1
net.ipv4.tcp_reordering = 3
net.ipv4.tcp_ecn = 0
net.ipv4.tcp_dsack = 1
net.ipv4.tcp_mem = 47808 63744 95616
net.ipv4.tcp_wmem = 4096 16384 2039808
net.ipv4.tcp_rmem = 4096 87380 2039808
net.ipv4.tcp_app_win = 31
net.ipv4.tcp_adv_win_scale = 2
net.ipv4.icmp_ratelimit = 250
net.ipv4.icmp_ratemask = 6168
net.ipv4.tcp_tw_reuse = 0
net.ipv4.tcp_frto = 0
net.ipv4.tcp_low_latency = 0
net.ipv4.ipfrag_secret_interval = 600
net.ipv4.ipfrag_max_dist = 64
net.ipv4.tcp_no_metrics_save = 0
net.ipv4.tcp_moderate_rcvbuf = 1
net.ipv4.tcp_tso_win_divisor = 3
net.ipv4.tcp_congestion_control = cubic
net.ipv4.tcp_abc = 0
net.ipv4.tcp_mtu_probing = 0
net.ipv4.tcp_base_mss = 512
net.ipv4.tcp_workaround_signed_windows = 0
net.ipv4.tcp_dma_copybreak = 4096
net.ipv4.tcp_slow_start_after_idle = 1
net.ipv4.cipso_cache_enable = 1
net.ipv4.cipso_cache_bucket_size = 10
net.ipv4.cipso_rbm_optfmt = 0
net.ipv4.cipso_rbm_strictvalid = 1
net.ipv4.tcp_available_congestion_control = cubic reno
net.ipv4.tcp_allowed_congestion_control = cubic reno
net.ipv4.neigh.default.mcast_solicit = 3
net.ipv4.neigh.default.ucast_solicit = 3
net.ipv4.neigh.default.app_solicit = 0
net.ipv4.neigh.default.retrans_time = 100
net.ipv4.neigh.default.base_reachable_time = 30
net.ipv4.neigh.default.delay_first_probe_time = 5
net.ipv4.neigh.default.gc_stale_time = 60
net.ipv4.neigh.default.unres_qlen = 3
net.ipv4.neigh.default.proxy_qlen = 64
net.ipv4.neigh.default.anycast_delay = 100
net.ipv4.neigh.default.proxy_delay = 80
net.ipv4.neigh.default.locktime = 100
net.ipv4.neigh.default.gc_interval = 30
net.ipv4.neigh.default.gc_thresh1 = 128
net.ipv4.neigh.default.gc_thresh2 = 512
net.ipv4.neigh.default.gc_thresh3 = 1024
net.ipv4.neigh.default.retrans_time_ms = 1000
net.ipv4.neigh.default.base_reachable_time_ms = 30000
net.ipv4.neigh.lo.mcast_solicit = 3
net.ipv4.neigh.lo.ucast_solicit = 3
net.ipv4.neigh.lo.app_solicit = 0
net.ipv4.neigh.lo.retrans_time = 100
net.ipv4.neigh.lo.base_reachable_time = 30
net.ipv4.neigh.lo.delay_first_probe_time = 5
net.ipv4.neigh.lo.gc_stale_time = 60
net.ipv4.neigh.lo.unres_qlen = 3
net.ipv4.neigh.lo.proxy_qlen = 64
net.ipv4.neigh.lo.anycast_delay = 100
net.ipv4.neigh.lo.proxy_delay = 80
net.ipv4.neigh.lo.locktime = 100
net.ipv4.neigh.lo.retrans_time_ms = 1000
net.ipv4.neigh.lo.base_reachable_time_ms = 30000
net.ipv4.neigh.eth0.mcast_solicit = 3
net.ipv4.neigh.eth0.ucast_solicit = 3
net.ipv4.neigh.eth0.app_solicit = 0
net.ipv4.neigh.eth0.retrans_time = 100
net.ipv4.neigh.eth0.base_reachable_time = 30
net.ipv4.neigh.eth0.delay_first_probe_time = 5
net.ipv4.neigh.eth0.gc_stale_time = 60
net.ipv4.neigh.eth0.unres_qlen = 3
net.ipv4.neigh.eth0.proxy_qlen = 64
net.ipv4.neigh.eth0.anycast_delay = 100
net.ipv4.neigh.eth0.proxy_delay = 80
net.ipv4.neigh.eth0.locktime = 100
net.ipv4.neigh.eth0.retrans_time_ms = 1000
net.ipv4.neigh.eth0.base_reachable_time_ms = 30000
net.ipv4.neigh.wlan0.mcast_solicit = 3
net.ipv4.neigh.wlan0.ucast_solicit = 3
net.ipv4.neigh.wlan0.app_solicit = 0
net.ipv4.neigh.wlan0.retrans_time = 100
net.ipv4.neigh.wlan0.base_reachable_time = 30
net.ipv4.neigh.wlan0.delay_first_probe_time = 5
net.ipv4.neigh.wlan0.gc_stale_time = 60
net.ipv4.neigh.wlan0.unres_qlen = 3
net.ipv4.neigh.wlan0.proxy_qlen = 64
net.ipv4.neigh.wlan0.anycast_delay = 100
net.ipv4.neigh.wlan0.proxy_delay = 80
net.ipv4.neigh.wlan0.locktime = 100
net.ipv4.neigh.wlan0.retrans_time_ms = 1000
net.ipv4.neigh.wlan0.base_reachable_time_ms = 30000
net.ipv4.conf.all.forwarding = 0
net.ipv4.conf.all.mc_forwarding = 0
net.ipv4.conf.all.accept_redirects = 1
net.ipv4.conf.all.secure_redirects = 1
net.ipv4.conf.all.shared_media = 1
net.ipv4.conf.all.rp_filter = 0
net.ipv4.conf.all.send_redirects = 1
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.conf.all.proxy_arp = 0
net.ipv4.conf.all.medium_id = 0
net.ipv4.conf.all.bootp_relay = 0
net.ipv4.conf.all.log_martians = 0
net.ipv4.conf.all.tag = 0
net.ipv4.conf.all.arp_filter = 0
net.ipv4.conf.all.arp_announce = 0
net.ipv4.conf.all.arp_ignore = 0
net.ipv4.conf.all.arp_accept = 0
net.ipv4.conf.all.disable_xfrm = 0
net.ipv4.conf.all.disable_policy = 0
net.ipv4.conf.all.force_igmp_version = 0
net.ipv4.conf.all.promote_secondaries = 0
net.ipv4.conf.default.forwarding = 0
net.ipv4.conf.default.mc_forwarding = 0
net.ipv4.conf.default.accept_redirects = 1
net.ipv4.conf.default.secure_redirects = 1
net.ipv4.conf.default.shared_media = 1
net.ipv4.conf.default.rp_filter = 0
net.ipv4.conf.default.send_redirects = 1
net.ipv4.conf.default.accept_source_route = 1
net.ipv4.conf.default.proxy_arp = 0
net.ipv4.conf.default.medium_id = 0
net.ipv4.conf.default.bootp_relay = 0
net.ipv4.conf.default.log_martians = 0
net.ipv4.conf.default.tag = 0
net.ipv4.conf.default.arp_filter = 0
net.ipv4.conf.default.arp_announce = 0
net.ipv4.conf.default.arp_ignore = 0
net.ipv4.conf.default.arp_accept = 0
net.ipv4.conf.default.disable_xfrm = 0
net.ipv4.conf.default.disable_policy = 0
net.ipv4.conf.default.force_igmp_version = 0
net.ipv4.conf.default.promote_secondaries = 0
net.ipv4.conf.lo.forwarding = 0
net.ipv4.conf.lo.mc_forwarding = 0
net.ipv4.conf.lo.accept_redirects = 1
net.ipv4.conf.lo.secure_redirects = 1
net.ipv4.conf.lo.shared_media = 1
net.ipv4.conf.lo.rp_filter = 0
net.ipv4.conf.lo.send_redirects = 1
net.ipv4.conf.lo.accept_source_route = 1
net.ipv4.conf.lo.proxy_arp = 0
net.ipv4.conf.lo.medium_id = 0
net.ipv4.conf.lo.bootp_relay = 0
net.ipv4.conf.lo.log_martians = 0
net.ipv4.conf.lo.tag = 0
net.ipv4.conf.lo.arp_filter = 0
net.ipv4.conf.lo.arp_announce = 0
net.ipv4.conf.lo.arp_ignore = 0
net.ipv4.conf.lo.arp_accept = 0
net.ipv4.conf.lo.disable_xfrm = 1
net.ipv4.conf.lo.disable_policy = 1
net.ipv4.conf.lo.force_igmp_version = 0
net.ipv4.conf.lo.promote_secondaries = 0
net.ipv4.conf.eth0.forwarding = 0
net.ipv4.conf.eth0.mc_forwarding = 0
net.ipv4.conf.eth0.accept_redirects = 1
net.ipv4.conf.eth0.secure_redirects = 1
net.ipv4.conf.eth0.shared_media = 1
net.ipv4.conf.eth0.rp_filter = 0
net.ipv4.conf.eth0.send_redirects = 1
net.ipv4.conf.eth0.accept_source_route = 1
net.ipv4.conf.eth0.proxy_arp = 0
net.ipv4.conf.eth0.medium_id = 0
net.ipv4.conf.eth0.bootp_relay = 0
net.ipv4.conf.eth0.log_martians = 0
net.ipv4.conf.eth0.tag = 0
net.ipv4.conf.eth0.arp_filter = 0
net.ipv4.conf.eth0.arp_announce = 0
net.ipv4.conf.eth0.arp_ignore = 0
net.ipv4.conf.eth0.arp_accept = 0
net.ipv4.conf.eth0.disable_xfrm = 0
net.ipv4.conf.eth0.disable_policy = 0
net.ipv4.conf.eth0.force_igmp_version = 0
net.ipv4.conf.eth0.promote_secondaries = 0
net.ipv4.conf.wlan0.forwarding = 0
net.ipv4.conf.wlan0.mc_forwarding = 0
net.ipv4.conf.wlan0.accept_redirects = 1
net.ipv4.conf.wlan0.secure_redirects = 1
net.ipv4.conf.wlan0.shared_media = 1
net.ipv4.conf.wlan0.rp_filter = 0
net.ipv4.conf.wlan0.send_redirects = 1
net.ipv4.conf.wlan0.accept_source_route = 1
net.ipv4.conf.wlan0.proxy_arp = 0
net.ipv4.conf.wlan0.medium_id = 0
net.ipv4.conf.wlan0.bootp_relay = 0
net.ipv4.conf.wlan0.log_martians = 0
net.ipv4.conf.wlan0.tag = 0
net.ipv4.conf.wlan0.arp_filter = 0
net.ipv4.conf.wlan0.arp_announce = 0
net.ipv4.conf.wlan0.arp_ignore = 0
net.ipv4.conf.wlan0.arp_accept = 0
net.ipv4.conf.wlan0.disable_xfrm = 0
net.ipv4.conf.wlan0.disable_policy = 0
net.ipv4.conf.wlan0.force_igmp_version = 0
net.ipv4.conf.wlan0.promote_secondaries = 0
I wrote another easy socket program by myself, strace it and find that the program blocked in the "accept" system call. How can I solve this problem, or what can I do to find out more clues? Thanks very much.
Last edited by henryouly (2007-06-16 12:17:34)

Lucke most likely nailed it. FWIW, all SYN_SENT means is that you weren't sent an RST and the SYN attempt silently failed for whatever reason. You can create the exact same state by sshing to a host that either doesn't exist on your network or is down. Probably if you were sniffing traffic on your network, what you'd see is several ARPs coming from your machine, and no answers, or an ARP request, and ARP reply, and then a SYN packet with no reply. In any case, it's most likely wrappers blocking access to the port.
Last edited by Snarkout (2007-06-08 14:32:02)

Characteristic is blocked by conversion (status 4)

Similar Messages

Maybe you are looking for