Characteristic relationships in bps

Hello All,
How to mainatain characteristic relationship in bps.i clicked on the tab characteristic relationship in planning area i found step,type, characteristics involved . where do i need to relation ship and where do i need to check characteristic combination
Regards
Jacko

Hi,
Use the following links to know about CR.
[http://help.sap.com/saphelp_nw04/helpdata/en/05/242537cedf2056e10000009b38f936/frameset.htm]
pratyush

Similar Messages

BPS Layout / planning level / characteristic relationship issue

Hi ,
I have a design question.
I have a characteristic relationship for 0CALMONTH(Cal. Year/Month) The below are derived attributes
Calendar month
Quarter
Cal. Year/Quarter
Calendar year
Fiscal year/period
Posting period
I am not using 0CALMONTH in my level/layout.
Question1 : When I save the layout by changing the key figure, the system creates another record with what ever the changes perfectly but it is not copying all the characteristics that were in the original line. One example of this issue is for characteristic relationship object.
Question2 : I do have the problem with other characteristics that NOT in the level since I am not using it but when I make a change for key figure in the layout and save it , it is not copying to the new line with all the characteristics.
Can I design this way? If yes why the values are not copied over to the new line? Any user exits where I can check / debug during the layout save?
I do not have any problem when I use standard BPS copy function, have these problems during the layout save.
Thank you for looking into it , appreciate any inputs......
Raju

Thank you Mayank. Very helpful/excellent. I think I am very clear/ all set , I will solve some of them by using derived charaterstic relationships.
One more important questions : How can We provide a solution where We can not use a particular characterstics at level because of the agrregation behavior of the layout and can not be derived ? but while We save the layout We need to get those characterstics like copy function does copy all the characterstics even if they are not in the level.
Is this make sense ? may not be valid question ? any thoughts ?
Appreciate your help.

Characteristic Relationship Error

Hi
I am deriving 0fiscper by concatenating 0fiscper3 and 0fiscyear. This works perfrectly in BPS. However, when I define the characteristic relationship in IP I get hte following error when checking:
Characteristic relationships for InfoProvider ZSEM_C20 are inconsistent
Relationship 01 is inconsistent
Contains generic time derivation 0FISCYEAR,0FISCPER3 -> 0FISCPER
Not permitted
The code for this is exacthly the same as for another derivation I did in BPS. How do I do this in IP?
L.

Hi,
In IP, their are default characteristic relationships for time characteristics which are always active. This wont show in the properties of the real time infoprovider (char. rel. tab) but this will be active and cannot be overridden; this is different from BPS where no such automatic chal. rel.s were present.
Therefore, you need not code them in an IP implementation.
Hope this clears your issue.
Edited by: Mayank Gupta on Feb 1, 2008 2:52 PM

Creating characteristic Relationship in IP

Hi all,
How do I create characteristic relationship in IP?
I want to derive Employees based on certain Cost Center.
This works well in BPS.
But in IP, when I go to Characteristic Relatioship tab, there is no option/button to create a new relation.
How do I do this?
All help is highly appreciated.
Thanks.
Anand

Did you try selecting other real time infoproviders. Do remember char-relationships can be created only for real-time cubes not for multiproviders or actual cubes.
Also check the real time cube that u selected is set to plan mode in RSA1.
If the problem is not solved, ask the basis team to look into it. probably a refesh to J2EE engine might solve the problem at times.

Characteristic Relationship BI-IP

Hi,
I am trying to create the following characteristic relationship on real time planning cube.
Within the realtime cube I have 0fiscper and 0fiscvarnt being populated.
I also want to calculate 0calquarter and 0halfyear1.
For this I have created a DSO which has 0fiscper and 0fiscvarnt as the key and 0calquarter and 0halfyear1 as the data fields. I am populating 0fiscper and 0fiscvarnt during the upload and calculating 0calquarter and 0halfyear1 via a routine.
I am now trying to create the characteristic relationship, but when I enter the DSO technical name, I get the following error message:
DataStore object '....' does not have a data field from the InfoProvider; this object is invalid here.
Any ideas why this happening, all the fields in the DSO exist in the realtime cube.
Thanks
DJL

Hi
For time characteristics, there are standard characteristic relationships.. dont see why need to create them.
if it is for fiscvarnt-fiscper combination: guess no need for other things.
Also if u r specifying DSO name in planning modeler, I guess u can look up the DSO thru F4 help.
rgds
Deepak

Fields missing in Characteristic Relationship

Hi Experts,
I want to derive Currency Key from Company code using Characteristic Relationship. I am using 'With Derivation' and master data attributes. But in the source fields I see only two fields Cost Center and Controlling Area. Not sure why I am missing rest of the fields from the Cube. Does this mean, I have to have Aggregation levels maintained before I look at Characteristic Relationships??
Thanks,
DV

Hi,
derivation is used to fill characteristic values from other characteristics in the InfoCube. So to derive 'Currency Key' from 'Company Code' means that both characteristics have to be inculded in your InfoCube. I think, Currency Key is an attribute of Company code, so you can create a derivation relation based on characteristic Company Code.
If you don't need 'Currency Key' in the InfoCube, you also may use Currency Key as a navigation attribute. Then you need not characteristic relationship for this, the system automatically know about the link between Company Code and Currency Key.
Regards,
Gregor

Characteristic Relationship Challenges in IP

All,
I'm having a bit of a problem with characteristic relationships in IP.
We have a simple planning cube with no data. It has the characteristics 0CALMONTH, 0MATERIAL, 0SALESORG, 0SALES_GRP, 0SALES_OFFICE, and 0PAYER. We want to build a query which allows us to plan on specifically designated valid combinations of 0SALESORG, 0SALES_GRP, 0SALES_OFFICE, and 0PAYER. However, instead of displaying only the valid combinations we desire, things seem to be showing up as the Cartesian Product of the characteristics.
We thought we could accomplish this through a characteristic relationship and we tried establishing one (first by creating a DSO and then by creating a hierarchy). But all combinations seem to yield only one of the following results:
*Only the first level of the hierarchy
*The Cartesian product
*The 2nd level of the hierarchy (and only the 2nd level) but unfortunately containing ALL options in master data
Has anyone here ever managed to do in IP what I'm trying to do (display only certain valid combinations of characteristics)? If so can you give me a step by step outline of how you did it?
According to SAP hosting we have all of the latest Service Packs.

All, the issue is partially corrected. Instead of fighting with hierarchies, I stepped back and re-attacked this problem by creating a characteristic relationship based on a DSO. (I had tried this initially but it failed for a reason I will explain below.)
We do top-down planning and so I need these valid combinations at each level of granularity. I created a DSO with the key 0SALESORG, 0SALES_GRP, 0SALES_OFFICE, 0PAYER, and populated it with the valid combinations. However, when I tried to create the characteristic relationship it does not allow me to select 0PAYER as a "Source Characteristic". This results the relationship being inconsistent.
So then I created a DSO with the key 0SALESORG, 0SALES_GRP, 0SALES_OFFICE, and populated the valid combinations. It worked perfectly for my query at that level of granularity but not for the higher level of simply 0SALESORG and 0SALES_GRP and so I found myself creating another DSO and characteristic relationship to handle that level.
Now I have the valid combinations down to a certain level of granularity displaying properly, but not all the way to the 0PAYER level. I'm not sure why it has a problem aside from perhaps the fact that 0PAYER is a reference char based on 0CUSTOMER. Does anyone know why it has this problem with 0PAYER?
Additionally I have found that I can no longer execute a simple copy function on my cube because it "cannot find reference data for characteristic combination" in an insistance when I planned on a characteristic with a blank value.

IP - Characteristic Relationship with exit class URGENT

Hi experts,
I need to derive two infoobjects from other one. I know that I have to use a exit class and there implement the ABAP code for especify the derivation.
I have copied the exit class CL_RSPLS_CR_EXIT_BASE. I suppose that the code of the derivation has to be implemented in the IF_RSPLS_CR_METHODS~DERIVE method. But, does anybody know the structure witch contain the source and target fields where is/are defined?
Thanks in advanced.

Hi,
set a break-point in the factory method get_instance to check whether the class is called. In the planning modeler make sure that you use an external break-point.
Or use rsrt an change a cell value: Derivation is called in the delta buffer to derive from the fields contained in the aggregation level. So check also that the source fields are contained in the aggregation level or can be derived via a a chain of derivations.
Also make sure that all source fields have to be non-initial. The system will not call derivation for initial source fields since in this case there is not unique target, cf. http://help.sap.com/saphelp_nw70/helpdata/en/43/1c3d0f31b70701e10000000a422035/frameset.htm
Remark: The attached document of note 994853 is about the disaggregation feature but it also contains a section about the characteristic relationships. Observe also that the template exit classes are documented in SE24.
Regards,
Gregor

IP - characteristic relationship/ data slices

Hi Guys,
I am very new to IP and would like to have some help regarding the following with some simple example
1) characteristic relationship
2) data slices
3) locking
Some examples with the above is much appreciated.
where can i get some good document explaining this ?
Thanks in advance...

Hi,
Please find below the examples for characteristic relationship and data slice,
1. Characteristic relationship:
Consider that you have characteristics called "Country" and "Continent" in your report (also in aggreagtion level).
You cannot always expect the end user to enter the correct continent for a country. In this case, you can create a char rel
based on the relastionship between these two characteristics (attribute, hierarchy or relationship data loaded to a DSO),where the source is "Country" and the target is "Continent". So when ever the user enters country and continent the char rel validates the entry based on the reference data (master data, hierrarchy or DSO data) and throws error if it s wrong. Apart from this by creating "With derivation" char rel, you can even derive continent value from country with out the user even entering the value in thye report.
2. Data Slice:
Consider that your planning requirement is you need to plan on a monthly basis which is like during current month you caa plan for the next month. In this case all other months except the next month should not be available for planning. In this case you can create a daat slice of type "Selection" where in you select '0CALMNONTH' and then filter it to the variable '0CMONTH' +1
where in you "Exclude" this selection. So now all the other months except next month at any point of time will be disabled for planning.
You can go through the following links for your reference,
Char rel - [http://help.sap.com/SAPHELP_NW04s/helpdata/EN/43/1c3d0f31b70701e10000000a422035/frameset.htm]
Data slice - [http://help.sap.com/SAPHELP_NW04s/helpdata/EN/43/1c3d0f31b70701e10000000a422035/frameset.htm]
Hope this solves your doubt.
Regards,
Balajee

Derive method of characteristic relationship with exit class BI IP

Hi All,
We have below four fileds in real time planning cube.
Quantity
Unit of measure
Converted Quantity
Converted UOM
We have implemented characteristic relationship of type exit between UOM and converted UOM. We need to populate values of converted UOM using characteristic relationship.
do we need to implement derive method to fulfil this requirement ?
if yes, when derive method of exit class is getting called ?
Awaiting for your reply.
Regards,
Mitesh.

Hi Andrey,
Thanks for your reply.
I have tried approach suggested by you however break-point did not stop yet to derive method.
I will give little more details on what i have implemented, probably it may help you.
I implemented CREATE method and generated below combinations. No other method has been implemented yet.
UOM            Converted UOM
G                 KG
KG              G
clear ls_unit.
ls_unit-unit = 'G'.
ls_unit-unit1 = 'KG'.
APPEND ls_unit to lt_unit.
clear ls_unit.
ls_unit-unit = 'KG'.
ls_unit-unit1 = 'G'.
APPEND ls_unit to lt_unit.
E_TH_CHAS = lt_unit[] .
Kindly suggest,
1. any specific configuration at query level is required to call derive method
2. what code should i need to write if i want to derive above combination using derive method
Thanks,
Mitesh.

Characteristic Relationship in BI-IP

Hi
We have an issue creating Characteristic Relationship in BI-IP. We are on BI-7.0 with SPS-12.
When I am selecting Char. Rel without DerivationChar Combinations Based on HierarchyThe Variable Hierarchy button which was getting displayed before is disappearing. We have more than one hierarchy for Internal Orders, Cost Elements.
Please let me know how to go about.
Appreciate your response.
Regards
Srinivas

Hello Srinivas,
I tried it and it seems to be a bug. Please open a customer message so SAP support can analyze the issue.
Regards,
Marc
SAP NetWeaver RIG

BI IP-Characteristic Relationship- invalid combinations are shown

Dear all,
we need to create a query ready for input but we need to avoid that the invalid combinations of two characteristic on wors are shown.
In fact the system presents the inconsistent combination as not editable.
Could you please suggest how to avoid this?
Many thanks in advance for help!
Stefania

Hi
the link is ueseful, but I try to explane what we really need.
We have in the level two chars (ZC1 and ZC2; ZC2 is attribute of ZC1) and here you can see the values
ZC1               ZC2
PREVAI     AI
GUASAI     AI
PREVBT     BT
GUASBT     BT
The requiremet is that the user can plan by ZC1 and ZC2, but that he has a total row by ZC2 (not editable).
That's why I defined a structure on the rows with restrictions for ZC1 and ZC2, according to the master data relationship, and put the structure on the rows.
I defined a hierarchy for ZC1 where nodes are values of char ZC2 and I set this in the characteristic relationship for the provider. here is the hierarchy.
AI
    PREVAI
    GUASAI
BT
    PREVBT
    GUASBT
The result is that in the best option I see in the query invalid combinations such as BT PREVAI.
Any suggestion?

BI IP : Characteristic relationship in Planning Modeler EXCL. #

Hi,
While creating characteristic relationship in the Planning Modeler. There is a new check box named :
" Excl. # "
It was not available in previous versions. What does it mean ?
Regards
Dheeraj

Hi,
For eg. you have characteristic relationship between two characteristics Product and Product Group with following valid combinations:
Product | Product Group
'#           |     Juice
Juice 1   |    Juice
Juice 2   |    Juice
Here, if you set checkbox 'EXCL #'. then the first combination which has '#' in Proudct will not be considered as valid combination by system.
Regards,
Deepti
Edited by: Deepti Maru on Nov 5, 2008 12:15 PM

Characteristic relationship not working

Hi All,
I created a characteristic relationship using Datastore object considering two infoobjects that were available both in my real cube as well as the ods.
Bcos of this i was able to generate(through reporting on cube) a valid combination of these two objects which were there in Datastore but not in Cube.
Yesterday i created this and the query was working fine.After that i deleted the char relationship and recreted again and did some more enhancements like suppressing result rows etc, adding more characteristics in filter.
But the query is not displaying any results now for objects present only in DSO and not in cube.
What could have changed because of which it is not working?
Any help is appreciated.
Ajay

Hello, the link should work, here a clickable link:
http://pwmather.wordpress.com/2013/07/04/projectserver-ps2013-excel-pivot-table-limitation/
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Characteristic Relationship - Derive week from 0CALWEEK

I need an exit for characteristic relationship, deriving week (to a custom characteristic ZWEEK) from 0CALWEEK. I.e. I should be filling ZWEEK with the week number 1-52 based on 0CALWEEK's YYYYWW. Anyone have something like this already in place and would perhaps be so generous as to share the code or experiences?
Regards,
Thomas

Hi Thomas,
here you are:
FUNCTION Z_DERIVE_ZWEEK.
*"*"Local interface:
*"       IMPORTING
*"             VALUE(I_AREA) TYPE UPC_Y_AREA
*"             REFERENCE(ITO_CHA) TYPE UPC_YTO_CHA
*"             REFERENCE(ITO_SOURCE) TYPE UPC_YTO_CHA
*"             REFERENCE(ITO_TARGET) TYPE UPC_YTO_CHA
*"       CHANGING
*"             REFERENCE(XS_CHAS) TYPE ANY
*"       EXCEPTIONS
*"              FAILED
FIELD-SYMBOLS: <calweek> TYPE ANY, <zweek> TYPE ANY.
READ TABLE ito_source TRANSPORTING NO FIELDS WITH
    KEY CHANM = '0CALWEEK'.
if sy-subrc = 0.
    ASSIGN COMPONENT '0CALWEEK' OF STRUCTURE xs_chas TO <calweek>.
    READ TABLE ito_target TRANSPORTING NO FIELDS WITH
      KEY CHANM = 'ZWEEK'.
    if sy-subrc = 0.
      ASSIGN COMPONENT 'ZWEEK' OF STRUCTURE xs_chas TO <zweek>.
      <zweek> = <calweek>+4(2).
    endif.
endif.
ENDFUNCTION.
Regards,
Marc
SAP NetWeaver RIG

Characteristic relationships in bps

Similar Messages

Maybe you are looking for