Characteristic values not displayed in APO Product

Hi friends,
I CIFed Materials with characteristics and class as 300 (variant) to APO-SNP where it gets converted to class 400 (CDP). The material gets CIFed but when I go to the Classification tab of Product master (/SAPAPO/MAT1), and hit Further Classes button, the Characteristics value descriptions appear but with no values assigned to it.
Have any one experienced this before or anyone could help me on this. Thanks in advance for your help.
Sam

Hello Friends,
My problem is similar to Sam's. The difference is that when I hit Further Classes button, it appears a messagem saying there are no assignements for class type 300, only for class type 400. Any idea of what is the cause?
Thank you!
Regards,
Elaine
Message was edited by:
Elaine Cristina Schneider de Carval

Similar Messages

Value not displaying in report whereas it returns in plsql developer

HI

Duplicate post.
value not displaying in report whereas it returns in plsql developer
value not displaying in report whereas it returns in plsql developer

PIR & CIR is not getting displayed in APO product master

Hi guys,
I have created PIR and CIR in R/3 ,but it is not getting displayed in APO . Please guide me to resolving this what are the settings i have to check in the SAP system.
Thanks
S.Murali

I am Basis consultant.
Regarding RFC, logical system assinement, are the things are configured.
But still it is not active the integration between R/3 & APO server.
(Behalf of Murali )

Stock in warehouse report - value not displayed.

In the "Stock in warehouse report" I selected this option: Price source = Last purchase price.
In the report, for an item, the value in the field "Item Price" is not displayed.
This item has a good receipt (with value) in this year.
Why the value is not displayed?
Thanks
Paolo

Paolo...
1. Did that receipt get paid for with an AP Invoice (when last purchase price is updated)?
and
2. Did you run an Inventory Audit Report before running the Inventory in Warehouse Report?
To see this maybe you can go into SAP OEC DEMO and create a new item, then create a PO - run the two reports, copy to Goods Receipt PO - run the two reports, and then copy to AP Invoice - run the two reports. You will see the difference.
Accounting point - an item is not really valued until the AP Invoice is processed. Only then do you know what the actual purchase cost is for a product.
Regards - Zal

COOIS- Report Grid Value not displaying

Hi Experts,
In COOIS report Prd Order item details , the grid values and stock category are not displaying values. we created the production order with AFS grid but while seeing report of item details the grid values and stock category are showing null values.
initial screen,
Report
but production order contains grid values.
any one guide me to resolve it.
Regards,
Thangam.P
Message was edited by: Thangam Perumal

Hi ,
my requirement is need to show the grid value and stock category of AFS production order based on item details. i think that alv reports is working based on view. it is possible to add custom view for that report? . if possible mean to any one guide me to fix the problem.
Regards,
Thangam.P

Null values not displaying in the LOV on the parameter form.

My report works perfect while in Oracle Reports 10g, however when I move it to our menu (Oracle Forms 10g) it does not display the null in the LOV on the parameter form.
This report allows the the user to select by inspector or district or everyone for certain dates.
Ex: I have 4 parameter fields. The user must enter the start & end dates and either the Inspector or the district or leave the inspector or district null to run for everyone.
The district LOV is :
select dnr_section_code, description from dnr_section_code where dnr_section_code in ('29', '38','52')
UNION
select null, 'All' from dual
order by 2 asc ;
The inspector LOV is:
select null , 'All' from dual
UNION
select person_seq, first_name||' '||last_name inspector from vw_eng_inspectors
order by 2 asc
In my Data Model query I use the :
My select
from tables
where clause
+
----by inspector
and (prod_fac_inspections.person_seq_inspector =
nvl(:inspector,prod_fac_inspections.person_seq_inspector))
---by district
and
(d.dnr_section_code = nvl(:district,d.dnr_section_code)
and d.person_seq = prod_fac_inspections.person_seq_inspector)
Again, it works perfect in Reports! It eliminates having 3 reports on the menu. This one report gives the user the option of selecting dynamic parameters.
Also, I got so frustrated, that I went a different route of using a default where.
I am stuck with the error of ORA:00933 SQL command not ended properly
1=1
I set the initial value to 1=1 and it does not like it.
I am stuck!
DB = Oracle Database 10g Enterprise Edition Release 10.2.0.2.0

Hi Krishna,
I'm not sure I understand the probelm.
A progress bar control only displays numeric values. When do you mean by "unassigned values"? What would you expect to be presented?
Best regards,
Udi

Total Amount value not displaying while executing print progrm for PO form.

Hi All,
           I created the PO form, for this i written a print program.After executing this print program everything s displaying & populating, but only the Total Amount not displaying r not populating.
          But, if i run the PO n tcode ME23N the Total Amount is displaying, after assigning the form n NACE.
So help me to get the Total Amount to be displayed n main window, while executing the print program.
Like this i declared n smartform,                    Total net value excl. tax           &is_ekko-waers& &is_pekko-netwr&......
The print program as follows,
report zpo.
tables: ekko,pekko,ekpo,ekpa,eket,ekkn,ekek,komk,nast.
data: fm_name type rs38l_fnam.
data: is_ekko type standard table of ekko with header line.
data: is_pekko type pekko occurs 0 with header line.
data: it_ekpa like standard table of ekpa,
      it_ekpo like standard table of ekpo,
      it_pekpo like standard table of pekpo,
      it_eket like standard table of eket,
      it_tkomv like standard table of komv,
      it_ekkn like standard table of ekkn,
      it_ekek like standard table of ekek,
      it_komk like standard table of komk.
selection-screen: begin of block b1 with frame title text-001.
parameters: pr_ebeln like ekpo-ebeln obligatory.
selection-screen: end of block b1.
select * from ekpo into table it_ekpo where ebeln = pr_ebeln.
select * from ekko into is_ekko where ebeln = pr_ebeln.
endselect.

code as follows,
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    FORMNAME                 = 'ZPURCHASE'
*   VARIANT                  = ' '
*   DIRECT_CALL              = ' '
IMPORTING
    FM_NAME                  = fm_name
CALL FUNCTION fm_name "'/1BCDWB/SF00000060'
EXPORTING
*   ARCHIVE_INDEX              =
*   ARCHIVE_INDEX_TAB          =
*   ARCHIVE_PARAMETERS         =
*   CONTROL_PARAMETERS         =
*   MAIL_APPL_OBJ              =
*   MAIL_RECIPIENT             =
*   MAIL_SENDER                =
*   OUTPUT_OPTIONS             =
*   USER_SETTINGS              = 'X'
    IS_EKKO                    = is_ekko
    IS_PEKKO                   = is_pekko
*   IS_NAST                    =
*   IV_FROM_MEM                =
*   IV_DRUVO                   =
* IMPORTING
*   DOCUMENT_OUTPUT_INFO       =
*   JOB_OUTPUT_INFO            =
*   JOB_OUTPUT_OPTIONS         =
TABLES
       it_ekpo                   = it_ekpo
       it_pekpo                  = it_pekpo
       it_ekkn                   = it_ekkn
       it_ekpa                   = it_ekpa
       it_ekek                   = it_ekek
       it_komk                   = it_komk
       it_eket                   = it_eket
       it_tkomv                  = it_tkomv.
* EXCEPTIONS
*   FORMATTING_ERROR           = 1
*   INTERNAL_ERROR             = 2
*   SEND_ERROR                 = 3
*   USER_CANCELED              = 4
*   OTHERS                     = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Header condition type value not displayed in sales order output

Hi gurus,
I have observed a strange issue regarding a header condition in a sales order.
we have a set up like following:
1. If the Header condition XXXX is used in sales Order then this value should be printed on sales order output.
2. If the Header condition mentioned in above point is not maintained in sales order it should print the total price of all line items.
Though i have maintained the header condition value in Sales Order Header its not displayed in SO output.
That is , I have a sales order and it has one HEADER condition type entered with 3500 USD.
In fact this value is used for some business purpose and is being printed on the sales order output for a specific output type.
But where as in a sales order this header condition value is not getting printed on the output though I am using same data as of the sales order which is having the header condition value printed on its output.
According to business,we must have the header condition value printed on sales Order output.
Please suggest how to proceed.
Thanks in advance.

Not sure if you are using costom smartform to print invoice, if yes then ask developer to debug and find the root cause and fix it.
You might need to give him condition when it shuld be printed and when not.
You can take reference of another output type for which it is printing

IR column Header value not displayed entirely during filteration

I have a IR, when I click any column Header and it shows the list of values as a dropdown.
some of them (which are larger) get cut off.. means the the entire content/value are not displayed within the dropdown. [width of dropdown is fixed and no of characters in the content/value is more..]
how can we fix this?
Also.. is there any we can increase the width of the Select List window when we click any column header in IR.
Thanks,
Deepak
Edited by: DeepakJ on Sep 15, 2011 4:08 PM

Hi,
jQuery is not included to Apex 3.2 by default.
If you have not include jQuery library's to e.g. your page template or page header, then it is not "installed".
You can run your app and inspect HTML source to be sure.
You can download jQuery and jQuery UI and place files to your HTTP server folder. Then load those in e.g. page template header.
Or use jQuery files from Google by placing to page template header.
<link type="text/css" rel="stylesheet" href="//ajax.googleapis.com/ajax/libs/jqueryui/1.8.16/themes/redmond/jquery-ui.css" />
<script type="text/javascript" src="//ajax.googleapis.com/ajax/libs/jquery/1.6.4/jquery.min.js"></script>
<script type="text/javascript" src="//ajax.googleapis.com/ajax/libs/jqueryui/1.8.16/jquery-ui.min.js"></script>Regards,
Jari

Table values not displayed properly

Hi,
I am trying to display the data from a bapi in a table. But my problem is that it is truncating the 0s from the values. Like if the values in the column Amount are 145.50, 85.00, 74.20,61.88 in the Bapi, the values are displayed as 145.5, 85,74.2,61.88 in the table.I want to display the values along with the 0s.
Can anyone please tell me why it is displaying like this and how to resolve this?
Regards,
Padmalatha.K

Hi,
My Requirment was to display values in specific format i.e. 12,555.55. coz for long value i m getting exponetial format of data.
i have used this code to achieve this
/******format for Calculated value********/
public String formatCal(double val,IwdMessagemanager mgr) {
String dd2dec = null;
try {
DecimalFormat df2 = new DecimalFormat("#,###,###,##0.00");
dd2dec = df2.format(val);
} catch (NumberFormatException e) {
return dd2dec;
in that case context data type need to be string.
Hope that may help you.
If not then try to work on the data type for the context.
Regards,
Deepak

Ecess and SEcess value not displaying in PO

Dear Experts,
in PO the BED is displaying correctly but Ecess(JEC1) and SEcess(JSEP) value its not displaying in PO ,were could be the problem?
regars
rj

Display the condition record maintained.
There are two fields namely Valid from and valid to.
Please compare these dates with PO creation date. PO creation date must lie within these validity periods maintained.

Fileter value not displaying in web

Hi all,
I have a issue with selecting the filter value for a unit.
The problem is I can find the value when I run the query in BEx, but same value is not displaying in webreport.
Can anyone tell me, what might be the problem.
(Actually I have to filter on a perticular unit value. In the masterdata I have 30 values.when I exicute the report in BEx I can find all 30 values.But when the same report in web I can see only 29 values)

Hello Madhu,
whats happening there is java script code in ur webtemplate is desined to pull only those value go to ur webtemplate and click on the html look at he code there and do changes required to get the value you want.Hope this helps.
Thanks & Regards
Jai

Report Painter - Values not displaying

I have a report created in Report Painter using Library 1GK that shows the total units. When I run the report for all cost centers the data does not display. I can explode the row and see the values but not total. I can export the data and the values export. This happens for both units and hours. Any ideas?
Thank you!
Helen

Please check the Section layout for your report and review the Rows tab. The Miscellaneous area has Mark Totals and Suppress duplicated totals. Treatment of zero rows can also be checked, may be the total of debits and credit of individual rows are totalling to zero. Just a guess.

Pie chart value not displaying in report builder

Hi,
I created a report by using report builder i used a pie chart in my report but one value is showing other one is not showing. Kindly tell me what is the problem behind it?
here is an image which is not displaying 1 value in pie chart. please help me

Hi Aamir,
Please check if there is any misconfiguration (e.g. show data label, formatting, etc.) for your chart slice per the following post.
http://social.technet.microsoft.com/Forums/en-US/ebc3bfc5-6338-4946-ade6-64e89611f6b7/ssrs-report-builder-30-pie-chart?forum=sqldatawarehousing
http://msdn.microsoft.com/en-us/library/dd220469.aspx
Further more, you can post this topic in SQL server forum for a better assistance.
http://social.technet.microsoft.com/Forums/en-US/home?forum=sqlreportingservices%2Csqldatawarehousing%2Csqlanalysisservices&filter=alltypes&sort=lastpostdesc
Thanks
Daniel Yang
TechNet Community Support

Display extra values not displaying extra value

Hi,
I have a SQL query that returns a LOV. I have "Display Extra Values" set to Yes. However, I don't see my "extra value" in the Select List. ?? Yet, when I check the session state, the value in the session state is the extra value. So how come I don't see it in my Select List?
Thank you.

This is from the on-line docs:
To define a value that does not display in the list of values:
a) From Display Extra Value, select Yes.
The extra value is used if the actual column value is not part of the LOV. In that situation, the actual value is shown. If you do not display extra values, you may end up with the wrong value and unintentionally update your data incorrectly.
b) In Null Value, specify the value that displays.
c) If you have not selected a Named LOV, enter the query used to display a select list in the LOV Query field.
Hope that helps.
Thanks,
Joe

Characteristic values not displayed in APO Product

Similar Messages

Maybe you are looking for