Characteristic with unlimited length

Hello,
can you help me on this issue.
Is there any way in BI to handle free texts?
I need load in BI and then display in queries a free text from R/3.
The length of standard characteristic is restricted to 60 CHAR. Unfortunately I do not know how long are the texts in the source system and we cannot restrict it to some fixed length, because the text has not to be truncated.
Please suggest !
Thanks
IFR

hi
In my case also i have 400 char text is comming,
in this case i created 8 infobjects and by using code i splitted in to every 60 char pushing into the first infobject and then next 60 into another infoobjects.
I written the code for datasource to extarct spliting of 60 char each and did the mapping to infoobjects
regards
Srini

Similar Messages

Process message characteristic with more then ( ) 30 digits in PI-sheet

Dear all,
I am looking for a solution to populate a process message characteristic with more then 30 digits in the PI
sheet and not during control recipe generation.
I have defined a customer characteristic (with O27C) in the `Additional data for Process Instructions
and Messages` with a length of 40 Characters. Next to that in my process message i added a function
to retrieve the material master text (40 digits) and to put it into the customer characteristic as an output.
However in this set-up I get an sytax error that blocks the generation of the control recipe. The syntax
erro is due to the fact that the long text characteristic should have a value. Obviously it does not,
because I want to retrieve it from the material description. Note that the material number I use to retrieve
the text, is selected in the PI sheet itself an is unknown (unplanned Issue) at generation.
Please advise.
Cheers, Leo
Edited by: L. de Pee on Oct 6, 2009 3:08 PM

Hi.
Its BPM Standard cubeCube , 0BPM_C01 and we are populating 0fiscyear based on Instance-Id.
I have reloaded the cube and maintained Index, checked DB Stat, Roll up , compression all are done, but still facing the same issues.
Please provide me your inputs if you faced the similar issue.
Thanks in Advance.
Br
Alok

How much would it be to add 2 more lines with unlimited talk and text?

I would like to find out how much three lines would cost with unlimited talk and text

BE WARNED!!!!
I was just hammered by Verizon because I added 2 lines. I brought two family members over from other carriers to our "share everything plan". The iphones we ordered came with pre-assigned numbers. The family members wanted to keep their existing numbers and Verizon said to "just have them ported over".
We didn't want, or had any use for the numbers that Verizon assigned the two new phones. When I got the phones I called the Port center at Verizon and they walked me through getting the numbers over from the other network. They had me activate the phones and then ported the numbers over (spend about a day on the process).
So I just got my bill and was outraged. Verizon charged me $78 for the lines of the phones they sent. I was charged $78 just to activate the line so that a number could be ported over. So now I have an extra $156 on my bill not to mention the $$$ they added on to have the numbers ported over. So adding two people to my family share plan cost me $327.

If I were to purchase the Apple Remote Desktop with Unlimited licenses, would I be able to install the client software on each of there computers/laptops and have them remote desktop into the server?

I have several friends and family who are looking for a central place to access information from ( Pictures, home movies etc ). So I am considering setting up an OSX Lion Server. There are some other things I can use it for as well.
Here is my question:
If I were to purchase the Apple Remote Desktop with Unlimited licenses, would I be able to install the client software on each of there computers/laptops and have them remote desktop into the server? Or would I have to install the Admin software on each? Do they intend it to be used strictly as one admin to access many clients?
I always could set up a network drive so they can log in and just see the folders they have created with space on the server I provide them. But I want them to be able to log an and actually use it as a Remote Desktop.
Thanks,
Eric

Dave,
Thanks for the feedback. I understand that ARD is meant for Remote Administration, but I was not sure if it could be used for my purpose as well. The reason I was looking to do it this was was because I read several articles online about security and performance issues with setting up VNC and activating screen sharing. Unless I am misunderstood.
As far as people's activities on the server, mostly it is going to be used as a place for them to store their media. I will only allow own person ( Who I trust and I know wont botch the server ), to run applications. Everyone else will be restricted to uploading and downloading content to their designated account on the server as well as a community share on the server.
I appreciate your help.
Thanks,
Eric

Bapi for Creation of PO(Purchase Order) with Factor & Length

Dear Experts,
we wnat to create Po automatically by using Bapi.
I come to know, there are some bapis like BAPI_PO_CREATE1,BAPI_PO_CREATE.
Normal PO, we are able to create with these bapis.
But we want to give factor & Length in PO Creation.
Because we are using the Mill Products(cable Industry).
so how to create the PO with Factor & Length.
Plese help me to sort this issue.
Thanks in advance,
Regards,
Rahul
Edited by: M.Rahul Reddy on Oct 15, 2009 1:07 PM
Dear Experts,
I am looking for your valuable sujjection to sort the issue.

This is version problem in the Sap system.
we are communicating with SAP people.

Flat file with fixed lengths to XI 3.0 using a Central File Adapter---Error

Hi
According to the following link
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
In Adapter Monitor I got the following error,
In sender Adapter,
Last message processing started 23:47:35 2008-10-25, Error: Conversion of complete file content to XML format failed around position 0 with java.lang.Exception: ERROR converting document line no. 1 according to structure 'Substr':java.lang.Exception: Consistency error: field(s) missing - specify 'lastFieldsOptional' parameter to allow this
last retry interval started 23:47:35 2008-10-25
length 15,000 secs
some one help me out ?
Thanks
Ram

from the blog you referenced -
 /people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
goto step 4
additional parameters
add as the last entry
<recordset structure>.lastFieldsOptional Yes
e.g.,
Substr.lastFieldsOptional Yes

We r using os 10.6.8 and 7.0.3 fcp,in that rendering with unlimited option out of memory warning is displayed Final Cut Pro 7, Mac OS X (10.6.8), 10gb RAM.no stills are there.there are hd standard

we r using os 10.6.8 and 7.0.3 fcp,in that rendering with unlimited option out of memory warning is displayed, 10gb RAM.no stills are there.there are hd standard videos

What format are your sources and what are your sequence settings? I'd guess that you're working with h.264 material which is not fcp friendly. If so, use compressor to conver to prores422

Transferring data to a flat file with a length greater than 255 bytes??

Is there a way to do this? At the end of the month, my dataset will reach a length of anywhere between 271 and 335. Even though I have the transfer field setup with a length of 512, I am only getting 255 characters worth of data when I pull the flat file in from the server.
Has anyone discovered a way to handle this? I cannot break the record up into blocks of 255, the Transfer has to be able to handle something greater than a length of 255.
Many Thanks!
Tavares L. Phillips

OK - according to OSS note 626010:
Short text          "TRANSFER f TO dataset" ignores LENGTH addition
Responsible         SAP AG
Component           BC-ABA-LA
                    Syntax, Compiler, Runtime
Long text
Symptom
In rare cases, the "TRANSFER f TO dataset" statement ignores the LENGTH
addition.
Other terms
DATASET, FILE
Reason and Prerequisites
This is caused by a kernel error.
Solution
The error is corrected for SAP_BASIS 6.20 using kernel patch 848.
Valid releases
Software Component                        Release
                                          from            to
SAP_BASIS SAP Basis component
610          - 620
It's an old note but...?
Rob

I am planning to switch to the "iPhone for Life Plan" with unlimited data. How do i determine what the balance is on my equipment installment plan?

I am planning to switch to the "iPhone for Life Plan" with unlimited data. How do i determine what the balance is on my equipment installment plan?

Yes I am considering switching from the VZ Edge to Sprint iPhone for Life plan.
Thanks,
Adrian
>> Personal information removed to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

Send a flat file with fixed lengths to XI 3.0 using a Central File Adapter?

Hello,
I'm wondering if someone have experience setting up conversion for different record structures. The example shown,
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter,
(in a greate way) only picture one kind of structure.
How should it be done if the file would contain
10Mat1
20100PCS
The first record structure has columns
ID(2),Material(10)
The second redcord structure has columns
ID(2),Quantity(3), Unit of messure (3)
Brgds
Kalle
Message was edited by: Karl Bergstrom

The configuration would be like follows:
Content Conversion Parameters:
Document Name: <your message type name>
Document Namespace: <your message type namespace>
Document Offset: <leave empty>
Recordset Name: <any name>
Recordset Namespace: <leave empty>
Recordset Structure: row1,,row2,
Recordset Sequence: any
Recordsets per Message: *
Key Field Name: ID
Key Field Type: String
Parameters for Recordset Structures:
row1.fieldNames ID,Material
row1.fieldFixedLengths 2,10
row1.keyFieldValue 10
row2.fieldNames ID,Quantity,UOM
row2.fieldFixedLengths 2,3,3
row2.keyFieldValue 20
Instead of row1 and row2 you can choose any name.
Regards
Stefan

Is it possible to display a waveform with fixed length and fixed starting point?

Hi,
I am using DAQ assitant to acquire voltage and current measurment of my device. The voltage is a pure sine wave and current is a periodic waveform with phase difference and distortion. I use waveform chart to display the waveform of voltage and current waveform in seperate charts and they work fine.But the waveforms look like moving to the right all the time, in another way ,the phase is always shifting. Now i want to display the waveforms of both with fixed length (say 2 cycle) and also in a same chart. Apart from that, i also want to display the voltage waveform starting form 0 degree (a fixed point )rather than moving all the time. In this case, i can observe the angle difference between voltage and current. Is there any method to achieve this purpose?
Many Thanks,
Hao

Hao,
first of all, you are using a chart which has three options for updates if the chart is "full":
Strip chart (default)
Scope chart
Sweep chart
These are called "update mode". Test the modes yourself.
Also you have to know that you will not likely have an integer number of periods of your signal in the display of the chart. Therefore, a continuous signal will "move" the graph from update to update.
You can implement some algorithm to discard data to maintain a static "trigger" level for display, but as stated, it will leave gaps in the signal. These gaps are not a concern unless you use the displayed signal for analysis (e.g. FFT).
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

How to compare text field length with the length of input characers

I hae a problem with the length of text field
I want to fix the length of TextField by taking the length of attribute to, whihc i have to use in text field
Like i have set the max length of Attribut to 10 and set the length of textfield also 10.
But the problem is that if i enter 10 'i' it dosn't fill even half the space in TextField
And opposit if i enter 10 'W'
I wonder if there is a solution for this problem
i ma using True Type of Font

* paint method in your own class that extends Canvas
* @param g where to paint e.g. printer, screen, ram
public void paint (Graphics g)
// display word "today" centred at x,y
FontMetrics fm = getFontMetrics( g.getFont( ) );
String wording = "today" ;
int xadj = fm.stringWidth( wording )/ 2;
// position bottom left corner of the text
g.drawString(wording , x-xadj, y );
// draw a red line from x1,y1 to x2,y2
g.setColor( Color .red );
g.drawLine( x1 , y1, x2, y2);
// draw an pre-existing Image. imX,imY is top left corner of the Image.
g.drawImage ( image , imX, imY , imWidth, imHeight , this);
} //end paint

Skype Premium with Unlimited World

I have a Skype Premium account with Unlimited World.
I received an email like many others detailing the changes to Skype Premium, and that I would continue to receive my Unlimited World subscription.
However since receiving that email, I have no Unlimited World subscription listed in my account, and I am not able to make calls.
A chat with online support said they were aware of the issue and were rolling it out to users accounts in phases to prevent "server crashes and overloads".
True or not?
I am also due to be billed on my account for £7.46 on December 25th, but apparently Skypes billing cycle is 8 months and I won't actually be changed anything.
Again, true or not?

Same here. I was paying/subscribing an unlimited country previously. I received the free upgrade to Unlimited World as well. But right now, I can't even make phone calls to the numbers in my previous unlimited country. I got 'insufficient credit'. message.
This is what I get when I checked my Purchase History...
Anybody knows what I should do?
And, is there a way to 'talk' to Skype support via online?
Thanks.....

Skype premium with unlimited world account but cal...

I've been subscribed to Skype premium with unlimited world for a long time now, then just got an email a few days ago, saying I got a free upgrade, and now I can't make any calls - tells me I have to 'buy credit' every time I try making any call I used to make included in my package... What happened?? I'm very frustrated.

I am Premium subscriber and received the email saying free world access but when I try to ring Italy it asks for a payment. Do I have to activate something? Any help would be appreciated

Interface output file : tab limited vs flat file with fixed length

hey guys,
any idea on difference b/w to file type : flat file with fixed length or tab limited file
thanks

Tab Delimited:
Two Field are seperated by a TAB
eg. SANJAY SINGH
First field is First Name and Second is Sir Name.
Nth field will be after N -1 tab
Fixed Length:
Every field has a fixed starting position and length
eg. SANJAY SINGH
Here First field start from Position 1 and has lenght 10 and 2nd field start from 11th postion and has lenght 10.
Fixed Length -> The lenght of each field is fixed, while in tab delimited the lenght of field is not fixed but we know it ends when the Seperatot (Tab) is encountered.

Characteristic with unlimited length

Similar Messages

Maybe you are looking for