Characteristics Inventory in settings,layout

Hi, I want to view Tax number 1 in fbl1n ,header data , which is to be added in inventory list of characteristics in layout. Pls help.
Thanks

Hi,
You can add the tax code in FBL1N transaction, by adding a special field at below specified location.
'spro>Financial accounting new>Accounts receivable and Accounts payable>Vendor accounts> Line items>Display line items>Define additional fields for line item display>'
At this location you need add the field with you want display additionally in the FBLN reports.
Please revert if you meant to something else
Regards,
Gopi

Similar Messages

  • S_p00_07000139-stock card and Inventory material report Layout Change

    Hi Gurus,
    I am trying to change layout of this report,it's not allowing more than 255 char list width,if more than 255 char list width means ,it's going to dump,
    can anyone help me regarding this,
    thanks and Regards,
    Veera.

    Note 1327549 - User specific layout not displayed in J_1HSTCD output-S_P00_07000139-Stock card and IMAT Report
    Thanks
    Veera.

  • ? marks on in my settings layout

    hey guys this ? mark every were on my mac please help

    Hey there sdeep!
    After reviewing your issue, it seems that you will need to reinstall your operating system in order to fix this issue. The steps for doing that can be found in this article:
    OS X Lion: Reinstall Mac OS X
    http://support.apple.com/kb/PH3878
    These are the steps for following through with this procedure on Mountain Lion, as well. Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Default layout settings

    What is the tcode to define the default layout settings.Layout management tcode?

    Rahul,
    https://wiki.sdn.sap.com/wiki/display/PLM/T.CodesforSAP-PS-SPRO,CustomizationRelated.
    OR
    FM48_1  PS-CM: Create Planning Layout
    FM48_2  PS-CM: Change Planning Layout
    FM48_3  PS-CM: Display Planning Layout
    Anmol Saxena.
    Edited by: Anmol Saxena on Sep 9, 2009 9:30 AM

  • Report Layout issue

    Dear Sapgurus,
    while taking the report for GL using T code fbl3n , format by default is coming as custom and not SAP standard format, how to correct the default setting to SAP Standard. Please tell me what is the procedure.
    Regards
    MY

    Hi,
    after executing FBL3N go to settings / layout / administration. The default layout is the one thats flagged in column "DS" just choose another one and save the change.
    Best regards, Christian
    Edited by: Christian Ortner on Jul 8, 2010 10:44 AM

  • F150 - Dunning layout

    Hi,
    can we assign the dunning layout to the user in the parameter Id .
    i want to assign the users different layout. is it possible in FB00.
    I run the F150 successfully and click on the dunning list.
    one of the  user wants to see the layout 0 and the other 1.
    can you please throw light on this.
    thanks in advance
    kind regards
    sap student

    Hi,
    User can define user specific layout and make user specific layouts as default layout.
    First create user specific layout.
    Path: Settings > Layout > Save.
    User specific check box should be selected.
    Next step user can make this layout as default layout for the user.
    Settings > Layout > Administration.
    Select standard layout or For user specific you have to push button User layout. User can select standard layout or user created layout as defalut layout.
    Select user specific layout created in above step,  push button user default settings or (Shift + F8) and save the settings.
    Defalut layout is now updated for user.
    Regards,!
    Raju
    Edited by: M V Narayana Raju on Sep 7, 2010 1:47 PM
    Edited by: M V Narayana Raju on Sep 7, 2010 1:56 PM

  • How to get a list of Layout Sets

    Hi Experts,
    How do I get a list of Layout sets in Portal ?
    I am using a KM Navigation IView to show a list of External Links. I have used a copy of Links IView for this. The Layout set used here is "LinkListExplorer".
    The problem with this layout set is it provides an option of Organize Entries to all End users. An end user might potentially delete a link or edit it due to this.
    I want to get rid of Organize Entries feature in this IView, which I feel can be achieved only by changing Layout of the IVIew.
    Please guide me to list of Layout sets or a way to maintain permissions for Links IView.
    Thanks,
    Yomesh.

    System Administration -> System Configuration -> Knowledge Management -> Content Management
    then,
    User Interface -> Settings -> Layout Set
    You will see lots of layouts sets that you can use...

  • Error in executing a layout which has a hierarchy in lead column

    Hi Experts,
    I have used a planning level where a characteristic called 'reporting code' is restricted with a hierarchy.
    Now when I am trying to execute a layout under this level I am getting some error. The characteristic is used in the lead column in this layout.Two differene type of error I am getting in following two different cases.
    1. When I am using the hierarchical settings for the lead column then I am getting the error 'Hierarchy INPUT is not suited to the planning mode.
    2. When I am not using the hierarchical settings for the lead column then I am getting the error 'Too many characteristic combinations for manual planning'.
    If I reduce the no of nodes in the hierarchy for testing then none of this error is coming. So I think this is related to the volume of the hierarchy.
    Can anybody put some light on this why this error is coming and how to resolve this error?
    Regards,
    Saikat Datta Gupta.

    In case of text hierarchies, wherein we can plan only on leaves, for the layout to be displayed in a hierarichal manner, we need the following settings.
    In the first screen of the layout builder, next to the layout description, click on the hierarchy icon, choose non-hierarchical data model and in the additional settings, all possible char combinations.
    In the last screen of the layout builder, in lead column settings, check display totals as hierarchy.
    With the above settings, layout shows the result in hierarchy mode.
    In BPS layout, the no of rows will be limited. As you have given all possible combinations, system tries to display the entire hierarchy, i think which is exceeding the max limit. Try reducing the hierarchy size or keep the additional settings as "Transaction data" and check if the problem persists.

  • Create a new layout for VF04

    hi all,
    how can i create a new layout apart from the standard for VF04 ( maintain billing due list ) , reason being the user does not require all the fields which are on display in the std one.
    Hence forth i want to create a new user specific layout.
    regards,
    sudarshan

    After executing VF04 create new layout, (settings -> Layout). Hide the columns you do not want to be displayed. If you want to change in the options available in the selection screen to the user then Goto -> Variants -> Save as variant.
    After that you create Z-transactions using SE93 and assign these Variant and Layout. Then assign Z-transaction to the users.
    Cheers.
    Ashish

  • How to change layout in List of Sales Orders (VA05)

    Hello,
    Does anybody knows how I can save layout changes or create new layout in transaction VA05 (List of Sales Orders)?
    Thanks for advance

    Hi,
    Goto VA05, enter values in selection screen press enter.
    In menu click on settings>layouts>Current  select the fields and save. Give layout name and description and press enter.
    You can choose your own layout  goto settings>layouts>Choose   click on layout from list of layouts.
    If you want to default your layout for VA05. settings>layouts>Administration. click on field default setting for your layout. Default you will get your own layout for VA05 transaction.
    Regards,
    Chandra

  • Additional field in report layout

    Dear Experts,
    In t code me2j (ALV format) there comes option change layout. when we click on this, we found displayed column and hidden column. if i want add one  extra column in hidden column. how can I Add this. this extra column is related to report that my client want.
    please suggest me step by step...
    its urgent
    thanks in advance
    Lallan

    Hi
    Following are the settings you need to do for adding the field in the report layout
    1. Select Settings-> Layout -> Changes
    2. you will be able to see 1. displayed Columns and 2. Column Set
    3. If you want to display some column from the column set, select the field and press show selected fields arrow or viceversa
    I hope this clarifies your doubt
    thanks and regards
    ramesh

  • Layout change for S_ALR_87012143/1099 Listings report

    Hi Experts,
    is it possible to change layout of report S_ALR_87012143 - RFKQSU20 by some means other then abap code change?
    We need to add Vendor master related data (such as PO BOX , City etc to the output ) when report is being extracted as excelsheet. This sheet should later be used to submit to 1099 Express.
    Are there any other alternative provided by SAP for S_ALR_87012143 - RFKQSU20 ?
    Any help would be appreciated?
    Thanks a lot!!!!

    Hello,
    As far as I know, all the relveant information required by you are
    available for report RFIDYYWT.
    In main screen of report RFIDYYWT:
    -> go to'output control' section-> 'tax per business partner'->
    click on 'configuration'-> from menu, click 'settings'-> 'layout'->
    'change'-> select the fields from the right box and add it to
    the left box-> click 'copy'.
    BR,
    Raquel

  • FBL1N - vendor ledger-layout

    HI EXPERTS !
    The transaction code for the report we r using is FBL1N - vendor ledger.
    we require the vendor's bank detail in this report at the header i.e. vendor bank name , account no..( basically change layout of report for output )
    this detail can be seen by transaction code FK03 - view vendor data base.
    can anybody help me to solve this .
    initially  after pressing  F8 i goto settings---- layout----current header rows.
    then click on gen.variable and insert/ change text variable window come, from where i can select  variable type but its not showing  vendor bank name , account no. how i can add these details under variable type and variable name sothat  i can select them.
    thanks

    Hi,
      go to Tcode SPRO->asp refrence IMG->Financial Accounting (New)->Accounts Receivable and Accounts Payable->Line Items->Define Additional Fields for Line Item Display. or use Maintain ALV Layout for Line Item Display
    if useful reward points.

  • Data Modeler EA1 - Print settings not saved

    Is there any way of saving page/print settings?
    Getting print settings/layout right often takes several changes in setup, at the moment it appears to make me do it every time I print.

    Not for now. I logged enhancement request for that.
    Philip

  • Set Default Layout in Selection Screen of  FBL3N

    Dear All,
    Here in FBL3N presently i we have a default layout is /balaji.
    But now i want to change this as a standard layout 1sap.
    I can try this in path SETTING->ADMINISTRATOR->SET DEFAULT LAYOUT.
    But after done this and save this procedure when i run this Transaction again
    no change effected.
    Means my change is not effect in selection screen of FBL3N.
    So can anybody tell me how can i change my default layout in selection screen of FBL3N .
    Please kindly help me ....
    Thanks
    Keyur

    Hi,
    Try with below navigation
    Run the report and go to the menu settings->Layout->Choose
    and also go through this link
    http://wiki.sdn.sap.com/wiki/display/ERPFI/Howtochange-setdefaultlayoutintransactionFBL1N%2CFBL3NandFBL5N
    regards
    kk

Maybe you are looking for