Characteristics Value

Hey Guys I create the characteristics and it has multiple Value .Some Value has subordinate value exist ...When I am going in AUSP table it's just showing me the subordinate value not the main characteristics value.
For example If I have a characteristics Value Head Size and it has subordinate value.. small, mid and big..it's only showing me small ,big ,med in AUSP table not Head Size. Is there any place I can see only this so I can use that logic for my BOBJ reporting ?

Hello
you can use table CAWN.
We have  one Class Like: BRGAC4
Suppose your characteristics : BRGAC4TYPE00 : TYPE
go to table CAWN

Similar Messages

  • From which table characteristics value is been picked in Batch(023 class)

    Hi gurus,
    Could anyone helpme out of this problem
    While creating migo ,batch no gets automatically assigned for the material when I click on the check button and then clicking the classification screen , characteristics value have to be given manually for the material  that is to be receipt in migo.
    Now My problem is I am creating a report where the material no along with the batch no and the characteristics value of the batch is required , but I cannot get the table name
    I have tried with mcha,mch2,mch1 but here no characteristics value could be derived ,Table  Cawn,cabn is there but how to link with other tables like mseg or MKPF.
    In table AUSP characteristics value is picking but same problem how to link it with mseg or mkpf etc.
    Guys please help me out of this.
    Thanks N regrds,
    Siddhrtha

    Hi
    CABN Characteristics ( o.a. batch/vendor)
    CABNT Characteristics description
    CAWN Characteristics ( o.a. material)
    CAWNT Characteristics description
    AUSP Characteristic Values
    Class types and objects :TCLAO Several class types for object
    TCLA Class types ( vb. lfa1 => v10 en 010)
    TCLAT Class type text
    TCLT Classifiable objects
    TCLC Classification status
    Regards

  • From which table characteristics value of Batch management is been picked

    Hi gurus,
    Could anyone helpme out of this problem
    While creating migo ,batch no gets automatically assigned for the material when I click on the check button and then clicking the classification button , there characteristics value have to be given manually for the material  that is to be receipt in migo.
    Now My problem is I am creating a report where the material no along with the batch no and the characteristics value of the batch is required , but I cannot get the table name
    I have tried with mcha,mch2,mch1 but here no characteristics value could be derived ,Table  Cawn,cabn is there but how to link with other tables like mseg or MKPF.
    In table AUSP characteristics value is picking but same problem how to link it with mseg or mkpf etc.
    Guys please help me out of this.
    Thanks N regrds,
    Siddhrtha

    Hi Merwyn,
    I cannot  find any common field between AUSP and  MCH1 ,could you tell me the procedure to link these 2 tables.
    Thanks N Regards
    Siddhartha Chatterjee
    Hi,
    Using AUSP table pick the object No. and link it with MCH1 to find the Batch No.
    using the batch No. link to MSEG-CHARG

  • How can I reduce the selection for the characteristics value in a BW query

    Good morning,
    I need to find out how I can reduce the selection for the characteristics values in a BW query.
    In a BW query I have a characteristic "Due month".
    The characteristic values shown in the query are from 01.2001->03.2007. I would like to reduce it to the last 2 years,in the query view,  without deleting the data for the other years in the cube.
    Do you know how this can be done?
    Thank you in advance for your feedback.
    Kind regards,
    Linda Verding
    Staff Consultant - CSC

    hi,
    First thing you have to do is check the report how the data is being restricted only to those months.
    1) one it can be variable in which the code is written for that to populate for last few years.
    or else it must have been hardcoded for these months.
    Go into your report and underneath the characteristicsCALMONTH there must be an variable or hardcoding.
    You need to change this here in the report.
    You dont have to delete anything there.
    Regards, Siva

  • How to find the list of material variant based on the characteristics value

    Hi
    We are creating materials variants for FERT Material Type in material master in MRP-3 view .There we configure the variant by attaching characteristics value 
    Now we want to have a report , which can give the list of material variants , if char value is given in selection
    Can somebody guide me if there is standard report for this OR what is the linkage in Table , so that we can develop a report
    rgds
    Sandeep

    I couldn't find a standard report to get the material variants based on characteristic values (the nearest I could find was CT12) but I wrote a report some time back here's the table join logic for the main select statement.
    select a~matnr
            e~atwrt
            h~atwtb
    into table i_tab
          from MARC as a
          inner join IBIN as b
          on b~instance eq a~cuobj
          inner join IBIB as c
          on c~ibase eq b~ibase
          inner join IBINVALUES as d
          on d~in_recno eq b~in_recno
          inner join IBSYMBOL as e
          on e~symbol_id eq d~symbol_id
          inner join CABN as f
          on f~atinn eq e~atinn
          inner join CAWN as g
          on g~atinn eq e~atinn
          and g~atwrt eq e~atwrt
          inner join CAWNT as h
          on h~atinn eq g~atinn
          and h~atzhl eq g~atzhl
         where     a~matnr in s_matnr
                and e~atinn in s_atinn
                and e~atwrt in s_atwrt
               and b~valto eq '99991231235959'. "This is important condition
    I included bare minimum fields to suite your requirement needs you can add whatever other field you want . Though I tested the table join, I suggest you to test it again before writing your own ABAP program using SE16N.

  • Where we maintain the cost of  characteristics  values in variant  conf.

    Hello guys,
      This thread i have posted many times in sdn , but never got the satisfactory answer.This time again i am trying my luck.
        Actually i am unable to understand how costing takes place in variant configuration.
        Suppose i have created one sales order for configurable material and there we select all the characteristics values which we want.
    But we don't maintain the prices of these characteristics values anywhere.So when i create the sales order than how the sales people calculate the cost of that order.
        Take a example of computer.For making computer,i want cabinet, processor, Harddisk, Ram, which are available in many sizes.So What we do that we create one configurable material and inside it we maintain all this characteristics and its values.And then i create one sales order for that configurable material and select the suitable characteristics and its values as reqd my customer.
         Now my question is how they cost that sales order?As we don't maintain the Accounting and costing view in material master of configurable material.
       So where to maintain the prices of these characteristics values?
            Plz guide.

    Hi
    You can make the price of a variant dependent on the characteristic values assigned (Pricing).You can use
    variant conditions to define surcharges and discounts for a variant
    Variant u2013Pricing steps
    Create condition record
    create a procedure where you enter the reference from the characteristic
    Assign the procedures to either the characteristic values
    configure the material in the sales order
    The net price for the material is displayed
    If a value that triggers a variant condition is selected when configuring a material in a sales order, the price of the material displayed under Net value is automatically increased or reduced.
    In addition, the Conditions pushbutton is displayed.
    On pressing this pushbutton,
    One can see which conditions have
    influenced the price.
    I tried to list you as much detail as possible. Hope that you will be able to resolve your issue
    Thanks

  • Transfer of characteristics values from material variant to its subordinate

    Gurus
    Need your Expert opinion on Variant configuration
    We are using Multi level Material Variants and our bussiness process demands for configuration of These Material variants in Transaction MD81 and during creation of Sales order .These configuration will not affetc the BOM explosion but will only be passed to the The lower level components (Which are again theMulti level Configuriable  Material variants ) as manufacturing instructions .To Enable these Flow of Characterisitcs we have Applied a Note which allows the Multi level Configuration of Material Variants and Pass this Values to lower Level and the characteristics value flow is visible as well for lower level from CU50 ,but when i create the requirement through  CIR or sales order and Configure the Material Variants  and Generate the Procurement Proposals to fullfill these requirements (MD02) in the form of Planned order  we are unable to pass one the Characterisitcs values to planned orders of  lower level Components of Material Variants .These characterisitc values are Used as Manufacturing Instructions and should be passed on to the Lower level of Material Variants through the use of dependencies in Configuration profile .but the problem is it works in CU50 and does not flow in planned orders , does any body have a solution for this ?
    Thanks In Advance
    awaiting reply
    Milind

    Hi Milind,
    I check that you implement a Note which allows the Multi level Configuration of Material Variants? is it sap note? mind to share the number.
    I ever faced this problems to before but fortunately the case in simpler so i just create another variant and maintain the component for the variant. For example : characteristic color. I create variant with color red black etc. For variant red, maintain component red. For variant black maintain component black, so on. Is it possible for your case?
    Regards,
    Arman

  • Copy of Batch characteristics value from material master to Batch

    Hi Gurus,
    I have maintained some values in the characteristics under batch classification in material master and want to copy the values in batch characteristics during batch creation at process order release.
    Can any one help me to achieve this in standard way?
    Thanks
    Sandip

    Hi,
    Try to understand the batch classification functionality...In batch classification characteristic values changes from batch to batch...Values should not be maintained in the material master...it does not have any meaning...in the material master we need to assign only the batch class with class type 023 in classification view ...no need to assign the values there....Batch classification means characteristics values differs from batch to batch...
    Thanks
    Kumar 

  • Mass Upload of object dependency for characteristics value

    Hi ,
      I need to upload the object dependency for characteristics values through transaction CT04. My input data consists of characteristcs name , characteristics value and the object dependency (KNNAM) . Need to populate the KNNAM field alone .
    Have tried with the FM 'CTMV_CHARACT_CHANGE_KNOWL_VAL' which suits my requirement but teh dependencies are not getting uploaded . Am I missing anything ? Since I do not have class details i.e class num and class type I am not able to use  the BAPI like 'BAPI_CLASS_CHARVALUE_LOCAL_DEP ' . Please suggest any othe r suitable method .
    Thanks in advance.
    Sanjeev

    Hi,
    Please check the below link..
    BAPI for Characteristic Dependency
    Thanks.

  • How to change characteristics values in PPDS planned order?

    Hi,
    I have few PPDS planned orders. I want to change the value of few characteristics of existing PPDS planned order.
    How can I do the same?
    Any standard T.Code or function module or report available to update the characteristics values of PPDS planned order in APO.
    Thanks in advance.
    Warm Regards,
    Surajit Das

    Hi Surajit,
    Char can be changed programatically.
    If you want to change the Planned Order characteritics before its creation, you can do so at the time Planning run itself (/SAPAPO/RRP3) in BADI /SAPAPO/RRP_SRC_EXIT, Method RRP_USEX_PLORD_CREATE.
    Planned Order characteritics can be changed after it creation.using BAPI BAPI_MOSRVAPS_SAVEMULTI3.

  • Table for characteristics values in the sales order

    Hi Experts
    I am entering the characteristics values in the classification screen in the sales order.
    I want to capture the characteristics & values with reference to the individual sales order for reports.
    Please let me know the tables for the same as it doesn't get capture in the item table..
    Thanks
    Ganesh
    Edited by: jganesh on May 4, 2011 1:26 PM

    Hiii,
    you may use VELO01_GET_CONFIGURATION function module to pass VBAP-CUOBJ value
    Hope it will solve your problem.
    Regards
    Shambhu Sarkar

  • How to new add characteristics value  c in report painter report.

    I  want add one how to new add characteristics value  in report painter report of FKi5. How can I add ?

    Dear,
    First you need to add that Field to your using library.When you add that
    field to your library ,you will automatically get that field into that
    selection list.
    Use T-code GR22 for change library and enter your library name and Table
    name and then select which field you want to add
    regards

  • Assigning of characteristics value for a batch

    Hi All,
    Please help regarding the assigning of characteristics value for a batch in transaction code MSC2N or MSC2 in the classification tab.
    If Function modules or BAPI is available pls advise the inputs to be provided for the function modules.
    Here is one function module which i searched, but if i run this function module, i am not able to commit my characteristics value.
    The function module is CIF_BATCHCHAR_MAP.
    For the above function module the inputs which i have given are...
    Material number
    Batch
    Plant
    Class type
    Class Number
    Characteristics name
    Characteristics value
    Expecting your earliest reply.
    Thanks,
    G.C.Arravind Kumar Vikram

    Try the code below
    *.1 create key
      it_objects-key_field = 'MATNR'.
      it_objects-value_int = matnr.
      APPEND it_objects.
      it_objects-key_field = 'CHARG'.
      it_objects-value_int = charge.
      APPEND it_objects.
      CLEAR l_objectkey.
      CALL FUNCTION 'BAPI_OBJCL_CONCATENATEKEY'
        EXPORTING
          objecttable    = 'MCH1'
        IMPORTING
          objectkey_conc = l_objectkey
        TABLES
          objectkeytable = it_objects
          return         = it_return2.
    2 fill it_num it_char it_curr with values
    3 change characteristics
    CALL FUNCTION 'BAPI_OBJCL_CHANGE'
        EXPORTING
          objectkey          = l_objectkey
          objecttable        = 'MCH1'
          classnum           = it_class-classnum
          classtype          = '023'
        TABLES
          allocvaluesnumnew  = it_num
          allocvaluescharnew = it_char
          allocvaluescurrnew = it_curr
          return             = it_return.

  • Missing characteristics value in table AUSP

    Hi all,
    In the classification of equipment master, the characteristics value of a new class could be shown but the value cannot be found in the table AUSP.
    (it's been ensured that the object no. input is correct)
    Where is the value stored? or is there something wrong?
    Many Thanks!

    hi,
    check CABN table.

  • Picking or copying Characteristics  Value from material master

    Dear Experts,
      Please i create   five Characteristics  which i assign to a Class ( of type 022 ). The Class is then assigned to  materials in the classification View of the Material Master.
    I want  one of the five Characteristics to copy its values from specific parameter value  maintaned in the  Material Master.
    Please assist on how to accomplish this?
    I did the following but did not get the desired results;  While creating this  Characteristic, in the Values Tab, I filled  ''MARC'' in the Tablename field   & in the Fieldname field, i enter the technical fieldname of the particular field from table MARC which i want.
    I want this particular value to be automatically copied into the Characteristics Value field in the Foreground  for eacb batch anytime Goods Receipt is done.
    after doing this, anytime Goods Receipt is done & a batch number generated, it takes me to the Classification screen, but this particular field which i desire  to be auto updated remains blank. 
    Please assist ?

    Hi,
    1. This will not automatically updated just as we wil fill the addtional date table and field.
    2. you need to write the object dependency to get it updated when you call somewhere
    3. Generally in the batch level you will be able to do this .( even you can use function / object dependency )
    Reg
    Dsk

  • Copying Batch Characteristics Value from Standard SAP Table Field

    Dear Experts,
    1. While creating a user-defined Batch Characteristics 'CREATED_BY' using ct04,  on the Additional Data tab, I filled  the following fields as follows:  Table Name = MCHA,  Field Name =ERNAM.
    'CREATED_BY' was then assigned to a batch Class TRIMMED (of class type 022).
    TRIMMED  was assigned to a batch managed material ADE245DD.     
    After posting co15 (confirmation of production order) for material ADE245DD, the value in table MCHA & field ERNAM is automatically copied into the Batch Characteristics value field of u2018CREATED_BYu2019  for the generated batch.
    2. But I am unable to achieve the same result when I create another Batch Characteristic with similar settings in the Additional Data tab as follows: Table Name = MARC, Field Name = DISPO.
    After doing co15, the value stored in table MARC and field DISPO does not get copied into the Batch Characteristics value.
    Please what do I need to do in Scenario 2 above to achieve the same result as in Scenario1?
    Regards

    Hi,
    Table and field used in additional data table should be related to the object than only it will work, for e.g. MCHA and ERDAT will work if you create a characteristcis and assign it to class type Batch (022/023) because MCHA table has Batch no. as primary key,
    this implies for using material specific table e.g. MARA , you should use characteristics with class type 001 (Material class) , try using with table MARC also
    Cheers
    Dheeraj

Maybe you are looking for