Characters in source Editor

The characters in the source editor diapear and then reapear when you move the mouse or the cursor over them, also the you can't minimise the window.

Simple Check if you mouse drivers documentation , if the driver has these methods
1. hideCharactersForMyUnknownSourceEditorForUnexplainedReasons( MouseUser M , Application unknown , Context unknownToo ) ;
and
2. showCharacterForMyUnknownSourceEditorForUnexplainedReasons() .

Similar Messages

Source editor preferences.

empty

...And we kept the promise. Even though there is no UI for the source editor
preferences yet, you can modify the properties "editor.source.maxLineLen",
"editor.source.indentChar" and "editor.source.indentCount" in the properties
file located at:
{Workspace
directory}\.metadata\.plugins\org.eclipse.core.runtime\.settings\com.m7.nitr
ox.prefs
Here is a description and the default value for each of these properties
Note that you only need to have a property in the file mentioned above only
if its value is different than the default value.
#The maximum number of characters in a source code line, after which
#the line is wrapped.
#This is only used for the source code generated by NitroX.
editor.source.maxLineLen=80
#The character used for indentation in the source code.
#Allowed values are "space" and "tab".
#This is only used for the source code generated by NitroX.
editor.source.indentChar=space
#The number of characters used for source code indentation.
#The character used for indentation is specified by the
"editor.source.indentChar" property.
#This is only used for the source code generated by NitroX.
editor.source.indentCount=2
M7 Support
"DanBar" <[email protected]> wrote in message news:413811b4$[email protected]..
What about source editor preferences?You've promised it will be provided in 1.1 final release... (see
news://newsgroups.m7.com:119/[email protected]).
Regards,
DanBar

Mac: Problems with certain characters in the editor

I have now downloaded the production version on my Mac and it runs just fine. The first thing I see is that the painting problems with the close icons etc. have been fixed. Thank you for that. But I still have trouble typing certain characters in the editor. I haven't reported that yet, but I have seen others report similar problems caused by missing support for international keyboards. The characters that I cannot type are |\[{]} which is pretty annoying when you're writing Java code. :-) It works fine in normal Java text fields. On my Norwegian keyboard I normally input all these characters by typing 7 and 8 combined with option or option + shift.

Check if database characterset supports these special characters
check client's nls settings.
check client machine's language settings (converts characters in driver level)

Source editor is AWOL in SJSE8 Build 051011_2

Refer to tutorial: UML Modeling: Developing Applications
When right clicking and expecting "Navigate to source" in the context menu, it does not appear. Furthermore, I have been unable to get the source editor to appear at all.
Is this a:
1) Feature
2) Bug
3) Omission
4) Installation Problem
Thanxinadvance

I'm using a home built COTS box based on an ECS motherboard, 1.8G Celly, 4 hard drives:[1 120G WD, 1 80G WD, 2 80G Maxtors], 512M ec parity RAM, 3 19" DELL Trinitrons, 1Matrox GC, 1 ATI 9550 GC, 256k cable modem, Belkin "g" wifi router. NO OVERCLOCKING, air cooled, Stable.
I'm running 3 installs of XP Pro, and 1 install of Kubuntu. Ihave a 20G personal documents directory that spans 15 years of computing :)
AS far as where I was in the tutorial, I don't remember--I had to move on!
I'm sure it was near the beginning though because I didn't get very far.

Error when trying to use excel source editor in SSIS 2012

I am using SQL Server 2012. This error occurs when I try o select the name of excel sheet in excel source editor in SSIS 2012. I am on win 7 64 Bit machine. I have office 2010.
Could not retrieve the table information for the connection manager 'Excel Connection Manager'. Failed to connect to the source using the connection manager 'Excel Connection Manager'.
Thanks in advance

Hi Satya, I even tried installing 32-bit ACE OLE DB providers even before posting this and I do not have permissions
to install it on my machine. I will work with IT Dept and update the status on how it goes.
Thanks

The boxes in the right margin of the source editor

I want to know how can I disable the code check that is displayed in the right margin of the source editor (red, brown or green boxes).
This is really annoying when you are writing bulk code with 10000 lines.

Don't get me wrong here Frank, I really like it and I think it is very useful.
But in my case such as checking the 10000-line-code, it is really annoying due to the delay in checking such bulky code.

Syntax template not displayin in source editor

In source editor, hot keys or syntax templates are not displaying
for example if we presss systme.println. if we press s and ctrl+[Enter] then synatax template will display. but that is not displaying. i am typin the entire syntax.
I am using jdeveloper thru developer suit.
regards,
pasupathi

Hi,
for system.out.printline the code template abbreviation is
sop ctrl+Enter
Frank

External source editor

Anyone know how to setup an external source editor?
D11 allows one to change loads of media editors based on its
"extension" and/or "mime/type", but there is in the list support
for source editor, which IMHO is the most important of all.
That and all the scripts DEFAULT to be writen as text files
in the same directory as the cast/movie that they come from
naturally.
I would like to use a "serious" text editor to hack
lingo/javascript scripts, not the internal text editor (which imho,
should just be scraped and sticked to view/breakpoint/inspect
mode).
Thanx in advance,
Kindaian

I like to use NetBeans at
http://www.netbeans.org/ . It
does code folding, and has a nice javascript reference. You can set
it up with Director by going to Edit->Preferences->Editors.
Locate the Netbeans executable typically at:
C:\Program Files\NetBeans 6.5\bin\netbeans.exe
Be forewarned though: You must specify an external file with
the .js extension for Nebeans to know its a javascript file.
Unfortunately, if you just double click any cast member that is a
script, Director launches the editor opening a temp file with the
extension .ls (as in Linked Script -dumb). Netbeans won't know what
to do with it and won't show you all the Javascript features like
code folding.
You must specify the external file first. To do this,
highlight the script cast member and use the Property Inspector in
Director to specify the 'Link As' file. Note that Director cache's
this file inside your .dir so you won't need to distribute the .js
source with your project.

Can not set external source editor

I am again having the problem of being able to use Notepad++ as my default external source editor. I had problems with this in previous versions. I just upgraded from version 21 to version 22 and I can no longer edit source. view_source.editor.path is still set and unchanged. view_source.editor.external is also still set and true but the view source now brings up the Firefox default which does not allow editing anything! Why would this keep changing? Where might this also be set as the about:config settings are apparently not being used. In searching I have not seen any other suggestions except going into about:config and then confirming or changing the two fields that are already set and worked in the past. What am I missing and why does it keep changing with each upgrade? This is Windows XP but my Windows 7 computer is doing the same thing.
Thank you.

Are there any errors related to view source in the Browser/Error Console (Firefox/Tools > Web Developer;Ctrl+Shift+J)?
Do you see the correct path if you paste this code in the code field in the error console and click evaluate?
<pre><nowiki>viewSourceAppPath =Components.classes["@mozilla.org/preferences-service;1"] .getService(Components.interfaces.nsIPrefBranch) .getComplexValue("view_source.editor.path",Components.interfaces.nsIFile);
viewSourceAppPath.path;</nowiki></pre>

XML source editor code style preferences

Hello,
I'm using JDev 10.1.3.1.
When editing an XML file using the source editor I can right click and select 'Reformat'. This indents my XML elements 1 space. Where can I set this to 2 spaces instead?
Thanks!

XML preferences are set in the Tools>Preferences>Code Editor>XML and JSP/HTML.
The preferences does not have provision to set indentation.

Calling the Abap Source Editor screen

Hi ,
we want to call the ABAP source editor in a screen in a special container , are there any class or MF that can help us .
best regards .
Med

Teh you may need to use class CL_GUI_TEXTEDIT and after getting values from the class then for validatiing the code use fm EDITOR_SYNTAX_CHECK
a®

Error during data load due to special characters in source data

Hi Experts,
We are trying to load Billing data into the BW using the billing item datasource. It seems that there are some special characters in the source data. When the record with these characters is encountered, the request turns red and the package is not loaded even into the PSA. The error we get in the monitor is something like
'RECORD 5028: Contents from field **** cannot be converted into type CURR',
where the field **** is a key figure of type currency. We managed to identify the said record in RSA3 on the source system and found that one of the fields contains some invalid (special) characters that show up as squares in RSA3. The data in the rest of the fields, including the fields mentioned in the error looks correct.
Our source system is a non-unicode system wheras the BW system is unicode enabled. I figure that the data in the rest of the fields are getting misaligned due to the presence of the invalid characters in the above field. This was confirmed when we unassigned the field with the special characters from the transfer rules and removed the source field from the transfer structure. After doing this the data was loaded successfully and the request turned green.
Can anyone suggest a way to either filter out such invalid characters from the source data or make some settings in the BW systems such that the special characters are no longer invalid in the BW system? We cannot write code in the transfer rules because the data package does not even come into the PSA. Is there any other method to solve this problem?
Regards,
Ted

Hi Thad,
I was wondering, if system is unicode or non unicode that should not matter the amount and currency field . As currencies are defined by SAP and it is in pure English at least a currency code part of 3 Chars.
Could this because of some incosistency of data ??
I would like to know for Which currency had some special characters it it in that particular record ??
Hope that helps.
Regards
Mr Kapadia

Runtime mapping error due to the special characters in source XML

Hi All,
I am facing problem with the special characters coming in the source XML message. it is failing at runtime in the mapping level. when i test with the same XML message manually in graphical message mapping it works.
it looks like a UNICODE problem which we face noramlly in ABAP as well. but looking for a solution.
For your reference i am giving the data which i am recivieing and the error message below.
the problem is with the character .
Source payload error:-
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
An invalid character was found in text content. Error processing resource 'file:///C:/WINNT/profiles/CG1009/Local Settings/Temp/a173eb8_2721HTML000003'. Line 26, Position 22
Early response is appreciated.
Thank you

If your message contains special chars and the encoding is not being set, then the error is of the system which is sending the message, not XI's. The webserver should return the correct encoding.
At adapter engine, You can set the enconding for the messages you send (for example, in Soap adapter module, set XMBWS.XMLEncoding parameter with value iso-8859-1), but not for the messages you receive.
As a workaround, you could try using a Java Mapping to change the encoding manually. For that, set the encoding of the OutputFormat of the XML you'll serialize. Try the following code piece for the mapping (inside a try/catch declaration):
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
DocumentBuilder documentBuilder = factory.newDocumentBuilder();
Document input = documentBuilder.parse(in);
OutputFormat format = new OutputFormat(XML, "ISO-8859-1", false);
XMLSerializer serializer = new XMLSerializer(out, format);
serializer.serialize(input);
For that code to work, you'll need to import xercesImpl.jar and xml-apis.jar in Imported Archives of mapping objects, in Integration Repository. Both are available at http://xerces.apache.org/xerces2-j/ .
Regards,
Henrique.

Opinions Needed for Brand New Java Source Editor....

Help:
I need you to tell me what features your ideal source code editor (with some project management tools built in) would have. Tell me anything, however big, however infeasible, or however trivial.
Background:
I'm starting work this summer on a major project, set to last until the summer of 2004 (2 years), during the course of which I plan to develop an advanced text editor (with project management tools), written in Java, that will be built from the ground up differently from any other. It will be freeware on release.
Features:
The software will be able to handle HTML/XML/Java/Prolog/LISP/C/C#/Perl languages and plain text, and will support plug-ins for other languages.
In the course of developing it, I want to experiment with novel features, built-in project management tools, support for numerous programming languages, different ways of viewing, editing and presenting the project/code, and the application of the latest AI research.
I also want to build a 'concept' GUI (as in 'concept car), that will be rather unlike any other application around at the moment and will be designed from the start to follow all the latest theory on user psychology, behaviour and preferences.
I have dozens of ideas for this, which sadly I need to keep mostly under wraps for the time being. However, this project is intended to create from scratch an entirely new text editor using user-centred design, and I need to know what all you novice and experienced users want.
Timeline:-----------------------------------------------
Prototypes expected by Xmas 2002.
First beta likely to appear late Summer 2003.
Successive betas to be followed by release
candidates around about Xmas 2003.
Final release to appear early Spring 2004.
Update Summer 2004.
(All these releases will be freeware)
As you can tell from the schedule, this is a serious project, and I hope I can produce a piece of (initially) freeware that will benefit everyone...
Thanks for the help!
Martin Robbins
UW Aberystwyth (UK).

a good deal is to implement your software using the Control-Model-View paradigm...
it may provide many different GUI.. including a web based GUI... imagine a distributed editor GUI .. which the user may access him project trough the web, mantaining the CVS control, secutiry and cross-plataform benefits....
it also provide you a chance of create new GUIs (evolution) along the next years.. without having to change the editing classes....
Nowadays I�m developing a AI Planner as part of my MsC thesis...
my project has the following design:
- a model: the set of data structures which are filled at the start of the planning process...
- a kernel controller, the code which makes the real work (parse the input files creating the model, dispatch the planner thread and save the results..)
- a GUI: I have tow GUIs now, an JFrame application and a JApplet application. These two GUIs share the same model and control classes.. this provide the same eficiency trough the web or trough a standalone application ....
that�s the point: a good GUI must be disassociated from the classes which makes the "undeground working"
it may be helpfull if you create a code model, some code checkers (it may be threads) and the GUI separatelly...
you may take a look at my efforts:
http://www.lia.ufc.br/~gaucho/planner.html
(the linke above shows only the GUI, but it is really not finished)

Using MICR-Characters with Source Technologies Printer

our customer wants to print checks with a sapscript form and following specs:
Printer Name:   ST-9222 ("Source Technologies" modification of Lexmark 4048_002)
TESTED DEVICE TYPEs:
          TROYMICR
          HP5MI
SAP Release:      6.0
OS:          Linux
Machine type:     x86_64
USED FONTS:      MICR_C     (10 pt.)
                 MICR_E (10 pt.)
REQUESTED MICR Characters:
          TRANSIT     (D/A)     "MICR_C/MICR_E
          AMOUNT     (A/B)
          on-us     (B/C)
          dash     (C/D)
Lexmark is the manufacturer of the printer and Source Technologies (ST) a retailer who upgraded the printer with an (so far) unknown MICR expansion kit.
Our problem is now to get the micr character print to work. According to a lack of documentation the retailer of the printer was not able to give any further information about the usage of the micr print from within sap systems. With the two tested generic sap device types the micr characters are not shown on the printouts.
Does anyone have expearience with printers of type Source Technologies?
- What is the recommended device type for the usage of micr with this specific printer?

Christian
Did you ever resolve this issue...It is imperative that I find out.
Can you please respond back to this thread......
Barbara

Characters in source Editor

Similar Messages

Maybe you are looking for