Characters of the Text not matching the criteria in PCUI

Hello All,
In the Case management for the Z-customised field, which has been defined as 200  text characters in GUI, when text entered in the PCUI and saved saves only 132 characters rather than the 200 as defined.
This is a field which defines the issue reported by the end user and when saved does not meet the restrictions.
When checked in the SE80 for the Package & Z_case(Identified from the CRMC_PCUITOOLS for the details) it has 200 characters defined but when the same is entered in the PCUI does not reflect the same.
Please suggest
Regards,
Ravi

Hi Bhaskar,
If you want to report a bug, please post your feedback to Microsoft Connect to meet our product term for effective response.
http://connect.microsoft.com/ie.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • Am new at pages and cannot figure out how to insert a bullet where I want it in the text, not at the beginning of the paragraph.  Word was much easier for me

    Am new at this forum and also at pages and can't figure out how to insert a bullet where I want it in the text, not at the beginning of the paragraph.  I found word much easier to use.  Please help. Trying to do a resume.

    On a US keyboard it is Option + 8 (above the letters). •

  • Sharepoint error - Search Issue - The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1).

    i see this error everywhere - In ULS logs, on site. On the site > Site settings > search keywords; I see this - 
    The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>IIS 7.0 Detailed Error - 500.19 - Internal Server Error</title> <style type="text/css"> <!-- body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;} code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;} .config_source code{font-size:.8em;color:#000000;} pre{margin:0;font-size:1.4em;word-wrap:break-word;} ul,ol{margin:10px 0 10px 40px;} ul.first,ol.first{margin-top:5px;} fieldset{padding:0 15px 10px 15px;} .summary-container fieldset{padding-bottom:5px;margin-top:4px;} legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;} legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px; border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696; border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'.
    I am facing issues in searching, my managed metadata service is not running, search results page throws internal error. Any Idea why this above error comes.
    P.S: We use windows authentication in our environment.

    Hi IMSunny,
    It seems you have solved this issue based on your another post.
    http://social.technet.microsoft.com/Forums/en-US/aa468ab0-1242-4ba8-97ea-1a3eb0c525c0/search-results-page-throws-internal-server-error?forum=sharepointgeneralprevious
    Thanks
    Daniel Yang
    TechNet Community Support

  • Error consuming Web service - content type text/xml;charset=utf-8 of the response message does not match the content type of the binding

    Hi all,
    We are trying to interact with Documentum server through DFS exposed WCF which communicates through port 9443 and we are provided with documentum issued Public Key certificates. We have successfully imported the certificates in client machine and configured
    the bindings as below in our .Net web application config file.
    <system.serviceModel>
    <bindings>
    <wsHttpBinding>       
    <binding
    name="ObjectServicePortBinding1">
    <security
    mode="Transport">
    <transport
    clientCredentialType="None"
    proxyCredentialType="None"
    realm=""
    />
    <message
    clientCredentialType="Certificate"
    algorithmSuite="Default"
    />
    </security>
    </binding>
    <binding
    name="QueryServicePortBinding">
    <security
    mode="Transport">
    <transport
    clientCredentialType="None"
    proxyCredentialType="None"
    realm=""
    />
    <message
    clientCredentialType="Certificate"
    algorithmSuite="Default"
    />
    </security>
    </binding>
    </wsHttpBinding>
    </bindings>
    Also, we set the message encoding as MTOM and the wcf client object initialization code snippet is as below,
    ObjectServicePortClient
    serviceClient = new
    ObjectServicePortClient(new
    WSHttpBinding("ObjectServicePortBinding1"),
    new
    EndpointAddress(UriUtil.ObjectServiceUri));
    if (serviceClient.Endpoint.Binding
    is
    WSHttpBinding)
       WSHttpBinding
    wsBinding = serviceClient.Endpoint.Binding as
    WSHttpBinding;
    wsBinding.MessageEncoding =
    "MTOM".Equals(transferMode) ?
    WSMessageEncoding.Mtom :
    WSMessageEncoding.Text;
    serviceClient.Endpoint.Behaviors.Add(new
    ServiceContextBehavior(Config.RepositoryName,
    Config.DocumentumUserName,
    Config.DocumentumPassword));
    When we execute the above code, we are getting error message as below,
    Exception: The content type text/xml;charset=utf-8 of the response message does not match the content type of the binding (multipart/related; type="application/xop+xml"). If using a custom encoder, be sure that the IsContentTypeSupported
    method is implemented properly. The first 407 bytes of the response were: '<?xml version="1.0" ?><S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/"><S:Body><S:Fault xmlns:ns4="http://www.w3.org/2003/05/soap-envelope"><faultcode>S:VersionMismatch</faultcode><faultstring>Couldn't
    create SOAP message. Expecting Envelope in namespace http://schemas.xmlsoap.org/soap/envelope/, but got http://www.w3.org/2003/05/soap-envelope </faultstring></S:Fault></S:Body></S:Envelope>'
    Then, we changed the bindings as below
    <system.serviceModel>
    <bindings>
    <wsHttpBinding>       
    <binding
    name="ObjectServicePortBinding1">
    <security
    mode="Transport">
    <transport
    clientCredentialType="Certificate"
    proxyCredentialType="None"
    realm=""
    />
    <message
    clientCredentialType="Certificate"
    algorithmSuite="Default"
    />
    </security>
    </binding>
    <binding
    name="QueryServicePortBinding">
    <security
    mode="Transport">
    <transport
    clientCredentialType="
    Certificate"
    proxyCredentialType="None"
    realm=""
    />
    <message
    clientCredentialType="Certificate"
    algorithmSuite="Default"
    />
    </security>
    </binding>
    </wsHttpBinding>
    </bindings>
    We are getting another error message,
    Exception: The client certificate is not provided. Specify a client certificate in ClientCredentials.
    Any pointers on resolving this issue would be highly helpful.
    Thanks

    Hi Dhanasegaran,
      As per your case, the corresponding details which may guide you to resolve this issue:
    1. First of all, you can try to call the wcf service directly from the browser & check where it will point out the correct location.
    2. In config file ,Set IncludeExceptionDetailInFaults to true to enable exception information to flow to clients for debugging purposes .
    Set this to true only during development to troubleshoot a service like below :
    <serviceBehaviors>
      <behavior name="metadataAndDebugEnabled">
        <serviceDebug
          includeExceptionDetailInFaults="true"   
    />
        <serviceMetadata
          httpGetEnabled="true"
          httpGetUrl=""   
    />
      </behavior>
    </serviceBehaviors>
    3. I suggest you to change that <security mode ="TransportWithMessageCredential"> instead of <security mode ="Transport">
     for more information, refer the following link :
    https://msdn.microsoft.com/en-us/library/aa354508(v=vs.110).aspx

  • WCF returning "The content type text/html of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8)"

    I have a WCF service I am trying to run on a new installation of 64-bit Windows Server 2008 IIS. Although it runs fine on Windows 2003 IIS, it is throwing the error in the thread title, which appears to be a server config issue, but I am not sure. Googling and searching the MSDN forums did not turn up a solution. I tried running WCF Logging, but that didn't help either.
    Does anyone have any suggestions on how to solve this probelm?
    Here is the error:
    The content type text/html of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
    <title>500 - Internal server error.</title>
    <style type="text/css">

    I have the same issue on Windows 7 machine. The service works fine using a SoapUI client but a .Net client faisl to get a response.
    Hi,
    I have a WCF service which works perfectly when using SoapUI but throws error in my .Net client.
    {"The content type text/html; charset=UTF-8 of the response message does not match the content type of the binding (text/xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first
    1024 bytes of the response were: '<HTML><HEAD><link rel=\"alternate\" type=\"text/xml\" href=\"http://xyz.mysite.com/ysa/Broker.svc?disco\"/><STYLE type=\"text/css\">#content{ FONT-SIZE: 0.7em;
    PADDING-BOTTOM: 2em; MARGIN-LEFT: 30px}BODY{MARGIN-TOP: 0px; MARGIN-LEFT: 0px; COLOR: #000000; FONT-FAMILY: Verdana; BACKGROUND-COLOR: white}P{MARGIN-TOP: 0px; MARGIN-BOTTOM: 12px; COLOR: #000000; FONT-FAMILY: Verdana}PRE{BORDER-RIGHT: #f0f0e0 1px solid; PADDING-RIGHT:
    5px; BORDER-TOP: #f0f0e0 1px solid; MARGIN-TOP: -5px; PADDING-LEFT: 5px; FONT-SIZE: 1.2em; PADDING-BOTTOM: 5px; BORDER-LEFT: #f0f0e0 1px solid; PADDING-TOP: 5px; BORDER-BOTTOM: #f0f0e0 1px solid; FONT-FAMILY: Courier New; BACKGROUND-COLOR: #e5e5cc}.heading1{MARGIN-TOP:
    0px; PADDING-LEFT: 15px; FONT-WEIGHT: normal; FONT-SIZE: 26px; MARGIN-BOTTOM: 0px; PADDING-BOTTOM: 3px; MARGIN-LEFT: -30px; WIDTH: 100%; COLOR: #ffffff; PADDING-TOP: 10px; FONT-FAMILY: Tahoma; BACKGROUND-COLOR: #003366}.intro{MARGIN-LEFT: -15px}</STYLE><TITLE>Broker
    Service</TITLE></HEAD><BODY><DIV id=\"content\"><P class=\"head'."}
    I have the same service hosted on my local machine and when I point to the local service I can execute the operation with no issues. The message encoding is Soap11. I tried changing to Soap12 but I get exact same error. Any ideas greatly appreciated.
    I do have windows Activation Features installed and I am using .Net Framework 4.
    Thanks
    Sofia Khatoon

  • Living in Dubai where many apps are blocked. How can I get around ? Tried to create a new Id but my billing address in Dubai will not match the criteria for an account in the US. Help please to get around the censorship...thnaks

    Living in Dubai where many apps are blocked. How can I get around ? Tried to create a new Id but my billing address in Dubai will not match the criteria for an account in the US. Help please to get around the censorship...thanks

    The censorship in regards to certain apps not being available in your country is by your country, not by Apple.
    Due to various laws and licensing in each country, in order to have an iTunes store account in a particular country you must have a credit card with a billing address in that country. If this were up to Apple, there would be no such requirement and there would be only one iTunes store for the entire world, but various laws, regulations, and licensing issues in each country, this is required by Apple.

  • The name on the security certificate is invalid or does not match the name of the site

    Hi Guys,
    Every time when we login to SAP Business One, we are getting two identical security Alerts, that we needs to click "Yes" twice.
    Text of error: “The name on the security certificate is invalid or does not match the name of the site”
    We tried to install certificate, but it is not solved this certificate issue and the alert still pops up on login.
    I guess, something wrong with dashboard settings, but don't really know what exact and how to fix it.
    Thanks,
    Sergey

    Hi,
    Please check SAP note:
    1810486 - Dashboard Certificate Sercurity Alert appears on every
    logon to Business One
    Thanks & Regards,
    Nagarajan

  • Background Job cancelling with error Data does not match the job definition

    Dear Team,
    Background Job is getting cancelled when I run a Job on periodically but the same Job is executing perfectly when I run it manually(repeat scheduling) .
    Let me describe the problem clearly.
    We have a program which picks up files from an FTP server and posts the documents into SAP. We are scheduling this program as a background Job daily. This Job is running perfectly if the files contain no data. But if the file contains data the JOb is getting cancelled with the following messages.
    And also the same Job is getting executed perfectly when repeat scheduling is done ( even for files with data).
    Time     Message text                                                                       Message class Message no. Message type
    03:46:08 Job PREPAID_OCT_APPS2_11: Data does not match the job definition; job terminated        BD           078          E
    03:46:08 Job cancelled after system exception ERROR_MESSAGE                                      00           564          A
    Please help me in resolving this issue.
    Thanks in advance,
    Sai.

    hi,
    If you have any GUI function modules used in the program of job
    you cannot run it in background mode.

  • The content type of the response message does not match the content type of the binding

    I have written an ASP.Net web service which returns english,chinese and portuguese data. Everything seemed working fine until the method retunred only english data. The moment it returns english, chinese and portuguese data I get the error:
    The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (text/xml; charset=utf-8). If using
    a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: 
    '<!DOCTYPE html> <html>     <head>         <title>Runtime Error</title>
            <meta name="viewport" content="width=device-width" />         <style>          body {font-family:"Verdana";font-weight:normal;font-size:
    .7em;color:black;}           p {font-family:"Verdana";font-weight:normal;color:black;margin- -5px}          b {font-family:"Verdana";font-weight:bold;color:black;margin-
             H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }          H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon
    }          pre {font-family:"Consolas","Lucida Console",Monospace;font-size:11pt;margin:0;padding:0.5em;line-height:14pt}          .marker {font-weight:
    bold; color: black;text-decoration: none;}          .version {color: gray;}          .error {margin-bottom: 10px;}          .expandable
    { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }          @media screen and (max-width: 639px) {           pre { width: 440px; o'.
    It is not written using WCF ... any workarounds?!
    Thank you.

    Hi Raj Krish,
    For ASP.NET related issue, please post to the following forum:
    http://forums.asp.net/
    Regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • The text 'Not Virus Scanned' is prepended to my subject lines

    In iCloud (mac.com) messages I send,   the text
    "[Not Virus Scanned]" - it is being pre-pended to the subject line.
    I hope that someone in the Apple/iCloud operations facility will actually look at what your
    systems are doing. And I hope it is not the user named  "Winston Churchill".
    Background:
    Back in August 2012, someone asked whether Apple was virus scanning emails:
    John W 1980
    Aug 8, 2012 4:12 PM 
    I reveived a password protected pdf by email. The subject line was marked [Not Virus Scanned]. Was this mark applied by the iCloud server?
    iCloud 
    This solved my question by Winston Churchill  on Aug 8, 2012 4:28 PM 
    Welcome to the Apple Community.
    No, it wasn't added by Apple
    See the answer in context 
    I have attached an email header (edited for privacy) to show this:
    "Oracle Communications Messaging Server" running on st11p00mm-asmtp004.mac.com
    Which is handling the messages, is running Fsecure Proofpoint, or something that is claiming to
    be - SO apparently iCloud IS doing virus scanning, and has chosen to corrupt our Email subject lines
    rather than simply stick to the conventional behavior of using SMTP headers to flag virus scan status.
    The outgoing subject was   "Re: ...."
    after passing through
    st11p00mm-asmtp004.mac.com ([17.172.81.3])
    (Oracle Communications Messaging Server 7u4-23.01(7.0.4.23.0) 64bit (built Aug
    10 2011)) with ESMTPSA id <[email protected]>
    Which IS an Apple system,
    the subject reads 
    [Not Virus Scanned] Re: ....
    What else is Apple editing on the email it handles?
    Return-path: <[email protected]>
    Received: from st11p00mm-asmtp004.mac.com ([17.172.81.3])
    by ms02552.mac.com (Oracle Communications Messaging Server 7u4-26.01
    (7.0.4.26.0) 64bit (built Jul 13 2012))
    with ESMTP id <[email protected]> for [email protected]; Thu,
    10 Jan 2013 19:40:24 +0000 (GMT)
    Original-recipient: rfc822;[email protected]
    Received: from [xxx.xxx.xxx.xxx]
    (cpe-xxx-xxx-xxx-xxx-.rr.com [xxx.xxx.xxx.xxx])
    by st11p00mm-asmtp004.mac.com
    (Oracle Communications Messaging Server 7u4-23.01(7.0.4.23.0) 64bit (built Aug
    10 2011)) with ESMTPSA id <[email protected]> for
    [email protected] (ORCPT [email protected]); Thu,
    10 Jan 2013 19:40:24 +0000 (GMT)
    X-Proofpoint-Virus-Version: vendor=fsecure
    engine=2.50.10432:5.9.8327,1.0.431,0.0.0000
    definitions=2013-01-10_09:2013-01-10,2013-01-10,1970-01-01 signatures=0
    X-Proofpoint-Spam-Details: rule=notspam policy=default score=0 spamscore=0
    ipscore=0 suspectscore=0 phishscore=0 bulkscore=0 adultscore=0 classifier=spam
    adjust=0 reason=mlx scancount=1 engine=6.0.2-1203120001
    definitions=main-1301100166
    References: <[email protected]>
    <[email protected]>
    In-reply-to: <[email protected]>
    MIME-version: 1.0 (Apple Message framework v1085)
    Message-id: <[email protected]>
    Content-type: multipart/mixed; boundary=Apple-Mail-20--564984355
    From: XXX <[email protected]>
    Date: Thu, 10 Jan 2013 11:40:21 -0800
    To: YYY <[email protected]>
    X-Mailer: Apple Mail (2.1085)
    Subject: [Not Virus Scanned] Re: ....
    ---- end of attachment ----

    We're all just users here. Neither Apple nor anyone from the 'iCloud operations facility' monitors these posts.
    Nobody here has any inside knowledge of under what circumstances any emails are 'edited' (if in fact they are) by any email systems between sender and recipient.
    In 12 years of using Apple's email systems I have never seen a single email subject changed. However prepending text is not 'corruption'. Corruption means the data is unreadable/inaccessible. Adding a few extra characters does not make the subject unreadable.
    All responsible email providers scan email for viruses. From Google searches it appears that such a message is added by some virus scanners to the subject only when an email attachment cannot be read (such as a password protected file, or a deeply nested zip file) and it serves as a warning to the recipient to exercise caution before opening the email. How many users routinely check SMTP headers before opening potentially damaging emails?

  • App Signing Error, Number of Folios Does Not Match the Main Folio File

    Hi All;
      I have a 250 page standalone app that I am trying to compile for the Apple Store. I read through the forums and enabled "AppBuilderLoggingEnabled.cfg" in my user directory to capture the issue. Here is the snippet of the log that was created that, to me, shows why the app isn't being signed.
    46386 ERROR [main] codesign.Signer - Failure during signing
    java.lang.RuntimeException: invalid package, number of folios does not match the main folio file (Folio.xml or Issue.xml) 251-250
              at com.adobe.devtech.codesign.IPAOutputHelper.convertFolioProduceFormatToFolio(IPAOutputHelp er.java:272)
              at com.adobe.devtech.codesign.IPAOutputHelper.replacePlaceholderFolio(IPAOutputHelper.java:1 92)
              at com.adobe.devtech.codesign.IPAOutputHelper.execute(IPAOutputHelper.java:82)
              at com.adobe.devtech.codesign.Signer.sign(Signer.java:169)
              at com.adobe.devtech.codesign.Signer.processArgs(Signer.java:106)
              at com.adobe.devtech.codesign.Signer.main(Signer.java:46)
    46388 ERROR [main] codesign.Signer - Error: invalid package, number of folios does not match the main folio file (Folio.xml or Issue.xml) 251-250
    I've stripped out special characters from the article titles and re-built the app only to face the same error. I went ahead and created a new AppID in the Apple Developer Portal, created new provision files, and the error remains. I am now creating a new folio and importing the articles into the new folio to see if that will solve the "number of folios does not match" issue.
    Any help or insight would be amazing. Thank you all.
    -matt

    I created a new folio and imported all of the articles again. After hitting "Create App" for this new folio, at about 10 pages in a "PDF Export" error stopped the create app process. I went into InDesign to update the layout for the 10th page to see that the PDF export issue was stopping me from updating the layouts as well. Something in the InDesign file wasn't playing nice with the folio creation, so I created two new InDesign files, deleted the article, and built a new article from scratch. I was able to import the new layouts as a new article to the main folio and hit "Create App" again. This time there were no issues with the creation process. I synched up the provision files in App Builder and was able to code sign the application.
    I guess the moral of the story is to double and even triple check every article along the way to make sure there are no issues being introduced into the process that will ultimately cause headaches during the distribution phase of app creation!
    -matt

  • The located assembly's manifest definition with name 'openfoundation' does not match the assembly re

    Ok. been working on this for the better part of a day. I am having trouble with the .net web controls. trying to create a simple portlet that populates a text box with values from a 2nd text box when a button is selected. both text boxes are in the same portlet.
    without using the <httpModules> entry in the web.config file the portlet works fine, but it does pop you out of the portal.
    setup: working in a Dev. environment with portal and portlets on the same box.Portal version is 5.0.2.EDK version is 5.0.2.
    error:
    The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.IO.FileLoadException: The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.Source Error:An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.Assembly Load Trace:The following information can be helpful to determine why the assembly 'openfoundation' could not be loaded.=== Pre-bind state information ===
    LOG: DisplayName = openfoundation, Version=2.0.9.3152, Culture=neutral, PublicKeyToken=d0e882dd51ca12c5
    (Fully-specified)
    LOG: Appbase = file:///c:/inetpub/wwwroot/netTest
    LOG: Initial PrivatePath = bin
    Calling assembly : dotnetportlet, Version=3.5.0.1, Culture=neutral, PublicKeyToken=null.
    ===
    LOG: Publisher policy file is not found.
    LOG: No redirect found in host configuration file (C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet.config).
    LOG: Using machine configuration file from C:\WINNT\Microsoft.NET\Framework\v1.1.4322\config\machine.config.
    LOG: Post-policy reference: openfoundation, Version=2.0.9.3152, Culture=neutral, PublicKeyToken=d0e882dd51ca12c5
    LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/nettest/9e6689f5/a0d2f067/openfoundation.DLL.
    LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/nettest/9e6689f5/a0d2f067/openfoundation/openfoundation.DLL.
    LOG: Attempting download of new URL file:///c:/inetpub/wwwroot/netTest/bin/openfoundation.DLL.
    WRN: Comparing the assembly name resulted in the mismatch: Minor Version
    Stack Trace:[FileLoadException: The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.]
       Plumtree.Remote.Portlet.PortletContextFactory.CreatePortletContext(HttpRequest req, HttpResponse resp) +0
       Com.Plumtree.Remote.Transformer.Condition.GatewayedStandardCondition.UseFilter(HttpContext ctx)
       Com.Plumtree.Remote.Transformer.FilterManager.UpdateFilter(HttpContext ctx)
       Com.Plumtree.Remote.Transformer.PTTransformer.BeginRequestHandler(Object sender, EventArgs e)
       System.Web.SyncEventExecutionStep.System.Web.HttpApplication+IExecutionStep.Execute() +60
       System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +87
    Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.947
    ************************************************************Is there any step by step instructions for setting up and using the .net web controls in Plumtree????
    There doesn't seem to be any information in one spot as to setting up the environment to use the .Net Web Controls. I have had to piece together information from multipule threads to get this far. I.E. there was nothing in any documentation that I have read that required the installation of the VJ# lib's. (that error took me the first half of the day to resolve :-) )
    Thanks for any help,
    Greg************************************************************

    Also, when reviewing the Plumtree_.NET_Web_Controls_InstallLog.log there were 5 nonfatal erros. These error's were:
    Install File: E:\plumtree\ptwc\2.0\bin\assemblies\edk.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\edk.dll (The process cannot access the file because it is being used by another process)
    Install File: E:\plumtree\ptwc\2.0\bin\assemblies\jsregistry.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\jsregistry.dll (The process cannot access the file because it is being used by another process)
    Install File: E:\plumtree\ptwc\2.0\bin\assemblies\log4net.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\log4net.dll (The process cannot access the file because it is being used by another process)
    Install File: E:\plumtree\ptwc\2.0\bin\assemblies\openfoundation.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\openfoundation.dll (The process cannot access the file because it is being used by another process)
    Install File: E:\plumtree\ptwc\2.0\bin\assemblies\Plumtree.WCFilter.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\Plumtree.WCFilter.dll (The process cannot access the file because it is being used by another process)
    When installing the Web Control's do you need to stop any services? I didn't see anything in the install notes about doing this?

  • SAP R/3 instance does not match the number of columns in schema error

    Hi Gurus,
    Badly need your help, I am currently on dead end here, I cant' think of any resolution for this error message, I have tried almost everything trying to resolve it. Kindly advise..
    error msg:* 1306806     3342     R3S-140113     3/23/2010 9:54:47 AM     The number of table columns <0> in an R/3 instance does not match the number of columns <8> in schema. Operation*
    source: R/3 database
    target: Oracle 10G DBase
    Tool: Busines Objects Data Integrator 11.7
    Many Thanks!
    Randy Reyes
    Philippines

    Hello,
    Maybe the following is applicable in your case:
    I don't know exactly what you are doing in the BOBJ system but are you using an RFC read table function?
    If yes this may be the problem. RFC ReadTable is OK to do some tests but is not scalable. Plus there is a limitation
    with the RFC_READ_TABLE function in terms of number of characters returned (up to 512 characters), you
    should use R/3 dataflow instread:
    Please find below the link which explains how to use the R/3 Dataflow:  
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/bobj/readingviaABAP
    I hope this helps,
    Best Regards,
    Des

  • SSIS The parameterized sql statement yields metadata which does not match the main SQL statement

    Hi all,
    I'm getting the above error when trying to execute a custom lookup.  What I'm trying to do is lookup the minimum promotional price between date ranges.  The SQL executes fine in SSMS
    SELECT refTable.PRICE
    FROM ( SELECT MIN(PRICE) AS PRICE ,
    NAME ,
    ITEMRELATION ,
    FROMDATE ,
    TODATE
    FROM [dbo].[AllCustPrices]
    GROUP BY NAME ,
    ITEMRELATION ,
    FROMDATE ,
    TODATE
    ) [refTable]
    WHERE [refTable].[NAME] = ?
    AND [refTable].[ITEMRELATION] = ?
    AND ? BETWEEN [refTable].[FROMDATE]
    AND [refTable].[TODATE]
    but errors in SSIS?

    Apologies, totally forgot i posted a question on here.  I still haven't resolved this.  full error text is TITLE: Package Validation Error
    Package Validation Error
    ADDITIONAL INFORMATION:
    Error at Data Flow Task [Lookup MIN Price [440]]: The parameterized SQL statement yields metadata which does not match the main SQL statement.
    Error at Data Flow Task [SSIS.Pipeline]: "Lookup MIN Price" failed validation and returned validation status "VS_ISBROKEN".
    Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
    Error at Data Flow Task: There were errors during task validation.
     (Microsoft.DataTransformationServices.VsIntegration)
    BUTTONS:
    OK
    If I take off the MIN function and just put * SSIS is quite happy, it does not like MIN for some reason?
    I'm really stumped with this... checked metadata for third parameter which is W/C Date DT_DBTIMESTAMP which is same as FROMDATE, TODATE where i'm using BETWEEN...

  • SCOM/ SCVMM Integration - MonitoringObjectId in alert does not match the virtual machine GUID in SCVMM

    I am importing alerts into a 3rd party application from SCOM 2012 R2 using the powershell code below. SCOM returns me MonitoringAlert objects, I need to map the alerts to the virtual machines in SCVMM. However, the MonitoringAlert.MonitoringObjectId value
    does not match the ID (guid) of the virtual machines in SCVMM 2012 R2. Surely these IDs should correlate, any ideas anyone? 
    $mg = Get-SCOMManagementGroup -ComputerName "SCOMGR.manageiq.com"
    $criteria = New-Object Microsoft.EnterpriseManagement.Monitoring.MonitoringAlertCriteria("Description LIKE '%Heartbeat%' AND ResolutionState == 0")
    $alerts = $mg.OperationalData.GetMonitoringAlerts($criteria, (Get-Date).AddDays(-10))
    many thanks in advance
    B

    Hi,
    You could use this command get the MonitoringObjectId.
    Get-SCOMalert | Select name,
    MonitoringObjectId
    For more information, please review the link below:
    Get-SCOMAlert Cmdlet, the Criteria Parameter and the Non-Equal Operator
    http://blogs.technet.com/b/stefan_stranger/archive/2012/11/02/get-scomalert-cmdlet-the-criteria-parameter-and-the-non-equal-operator.aspx
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for