Characterstics for set of batches

Hi
For each Batch we maintain different cgaracterstics and its values are diffeent for different batches.
Can we get characterstics for a set of batches.
The batch characterstics in which table it will store.
Regards,
srihari.M

Hi Srihari,
On the initial screen of CL6BN please enter the values as below
Class Type                        023
Object Table                      MCH1
Display
Flag the check box for the following
With assigned classes
With assigned values
Chars without values
value instead of description
With inherited characteristics
and Don't select Display options ALV tree ctrl
Now execute..
Hope this solves your query.
Thanks and Regards,
Dilip D

Similar Messages

  • Errors Batch Captures!! Tips for setting up Batch list corre

    I have set up a Batch List, and I keep getting an error after I have imported the Batch capture list, when I go to Batch Capture I keep getting an error about Timecode? I am also wondering when doing a Batch List is ok to begin with 00:00:00:00 timcode as a media begin? As batch capture truly saves a lot time, I sincerely appreciate your time in courtesy in replying to my post.
    Sebastian

    I avoid this problem by shooting the first 30 seconds of each tape to throw away. That way, my starting code for any new tape is always at least 00:00:30;00. I started doing this back with FCP 3 (and now have FCP 5). So, I don't know if this is still an issue with the newer version. I do know, however, that working with timecodes below 30 seconds was a pain. Before I learned this trick, I would be able batch capture all of my other clips. Then, the first clip on each tape I would use Capture Now (which seemed to be less finicky with the low time codes).
    I hope this helps.

  • Note 533276 - Setting the batch management requirement indicator

    Hi;
    we have found an oss note for setting the batch management requirement
    indicator.. but the program mentioned in oss note does't exist in the
    attachement part.. we urgently need your help..
    how can we find program RVBCONVMAT2BM?
    Note 533276 - Setting the batch management requirement indicator
    Solution
    Here, the standard procedure is to clear stocks of the current and the previous period as well as to complete the open documents. Note 30656 provides further information about this.
    Alternatively, in the case of a large data or document volume, you can use a conversion report from the batch development that sets the batch management requirement indicator without the necessity of manual preliminary works such as the posting of the stocks or the completion of open documents.
    We have developed the main features of this report, but it must be adjusted to individual business processes in a customer project that is subject to charges.
    If you require further information about functions of this tool or about running such a customer project, you can send an e-mail to the consulting department ([email protected]).

    Hi,
    You also need to check for open sales order, open production orders, open WM transfer orders and open deliveries. These documents needs to be closed/completed.
    Check OSS notes 533276 - Setting the batch management requirement indicator.
    Following is the details of this notes;
    Summary
    Symptom
    The attempt to set the batch management requirement indicator for a
    material in the material master record maintenance fails because there are
    stocks or documents that are not completed such as production orders, sales
    orders, deliveries or WM transfer orders.
    More Terms
    MARA-XCHPF, MARC-XCHPF, RVBCONVMAT2BM
    Cause and Prerequisites
    Solution
    Here, the standard procedure is to clear stocks of the current and the
    previous period as well as to complete the open documents. Note 30656
    provides further information about this.
    Alternatively, in the case of a large data or document volume, you can use
    a conversion report from the batch development that sets the batch
    management requirement indicator without the necessity of manual
    preliminary works such as the posting of the stocks or the completion of
    open documents.
    We have developed the main features of this report, but it must be adjusted
    to individual business processes in a customer project that is subject to
    charges.
    If you require further information about functions of this tool or about
    running such a customer project, you can send an e-mail to the consulting
    department (BMToolsatsap.com).
    Regards,

  • Batch create multiple pdf's while using epilogue.ps for setting initial view and opening bookmarks

    Hi,
    I'm trying to batch create multiple pdf's from word files, and use the epilogue.ps file for setting the initial view and opening the bookmarks panel, but i keep getting no satisfying result.. i'm probably missing something fundamental.
    I've read some forum posts and adobe help posts explaining this, so i'm pretty sure this would be possible?
    Reference:
    http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7f0f.w .html  see advanced panel options
    http://help.adobe.com/en_US/acrobat/using/WS58a04a822e3e50102bd615109794195ff-7f14.w.html
    System: Windows 7
    Acrobat: Acrobat X professional
    i've searched for and found a way to overwite the epilogue.ps file and have inserted the following:
    %  Insert your custom PostScript here...
    [ /PageMode /UseThumbs
    /Page 1 /View [/Fit ]
    /DOCVIEW pdfmark
    After that i checked my Adobe Acrobat preferences, and in the categorie 'Convert to Pdf' i selected 'Microsoft office word' in the select area 'Converting to pdf'.
    Clicked 'Edit settings' to allow creating a joboptions file (field: 'adobe pdf settings') which has the option 'Use epiloque.ps and prologue.ps' checked in the advanced section.
    So now i thought i would have everyting setup to create my pdf's, however, my view isn't changed to fit, nor are there any bookmarks or in this case thumbs (i used /useThumbs) visible.
    Did i miss something obvious? Is there a better way to test this? Any help would be appreciated!

    i like it about that ok in how to open my site

  • Configuration steps for Quality and Batch Management.

    Hi Friends,
    We are implementing QM along with Batch Management for testing the material like purity,pathology tests.
    I am new to Quality and Batch Management.
    Could any one guide me, how to configure material master for QM and Batch to test the material?.
    Thanks

    1) Maintain Material with Classification and Quality Management view
    2) Tick the Check box Quality key Active in QM View->QM view->Inspection Set up and activate the inspection type for which the inspection lot.(e.g insp. type 01 - GR against PO)
    3) Create Quality Info Record(QI01)
    4) In PO the stock automatically goes to Quality stock.
    5) Check MMBE stock
    6) Do Result Recording and Usage Decision(QA32)
    7) Check stock (MMBE).
    There are few steps where the PP/QM Consultant need to help you in QI01,QA32 and in Creating characteristics and class according to  Requirement(purity...etc).
    Regards,
    eswarmanu...
    Edited by: eswarmanu on Oct 21, 2008 7:09 PM

  • Process for setting up new directories and files on Unix

    I am trying to document a process �Process for setting up new directories and files on Unix batch servers�.
    Developer will be developing project on Windows and I need tell them as well as QA team how the Unix directory and file structure.
    Please let me know how is the process in Unix on AIX.
    If I get some documentation regarding this it will be useful.
    Thanks in advance
    Regards
    San

    well on unix/Linux/solaris there are no drives but storage heirarchy starts with a root directory represented with ' / '. and all files and directories are created in root directoy like
    /usr/local/bin
    /export/home/san
    etc
    also filesystem of unix consists iNodes rathar than FAT entries as in case of Windows.
    some basic information is available at
    http://www.techonthenet.com/unix/index.php
    Regards

  • How to set receiving batch mandatory in MIGO-mov type 303

    Hi gurus,
    We want to set receiving batch mandatory in MIGO-mov type 303.
    We already made this field (UMCHA) as Required in OMJJ under Field selection-Enjoy and Field selection (from 201)/Batch search procedure, but when do transaction, the field still not even appear. Can you help to know how to do that?
    Many thanks in advance

    Hello HongNguyen ,
    Please try the following customzing path in your system if you haven't already:
    - Transaction SPRO
       - IMG
         - Materials Management
          -  Inventory Management and Physical Inventory
            - Settings for Enjoy Transactios
               - Settings for Goods Movements (MIGO)
                  -   Field Selection per Mvt Type
    Please check your settings for Movement Type 303 and see if they are set to "Mandatory".
    I hope this information has been helpful.
    Best Regards,
    Frank

  • Firm Redirect with Set Cache Batch Updates or regular Expressions mapping?

    Hello everybody,
    I use the Sun Java Web Proxy as a Reverse Proxy. I want that the Proxy takes a special css-File only from a special server.
    for Instance: example.css should be taken from http://server.domain.com/static/example.css
    Should I use the "Set Cache Batch Updates" in the Caching-Tab or should I create a regular Expression mapping? In second case, how could the Expression looks like (SUN regular expressions are a different from normal - as I know)?
    Thank you for help.
    Greetings
    Johannes

    The regexpr. could be "http://.*/tud\\.css
    But is such a redirect possible at all?
    Please help me. I am a little bit helpless.
    Thanks
    InfoSeeker09

  • I have two Apple IDs, and this is causing problems with syncing via iCloud. How do I move everything to one ID? All advice is for setting up, not for after it's already set up.

    My problem is that I have been a Mobile Me user for the past couple of years, and because of that a second Apple ID was generated in addition to the one I've been using for years. When iCloud was introduced last fall I did everything I was supposed to in setting it up, but it is evident that the syncing is not working as it should. In checking, I am certain this is because I now have two active Apple IDs. I would assume this is a common issue with all who were/are Mobile Me users.
    The online help says you can't merge two IDs. Okay. What I want to do is to get rid of the Moble Me ID and only use my regular Apple ID. But the help on that issue seems to only give instructions for setting up the iCloud account. It seems that when I go into my iCloud accounts, both on my iPhone and my Mac, I can view the ID but there is no way to change them to another ID or to eliminate the account.
    Please help. I am a long-time Apple user and this really should be a fairly simple matter to take care of, but this is one issue where the normally user-friendly Apple way of life is giving me fits. Thanks.

    I am logged into the same things on both my iPhone and my MacBook Pro, except for mail. I use a gmail IMAP account and everything there already works on both machines. The iCloud account on my iPhone uses one Apple ID and the one on the Mac uses the second Apple ID.

  • I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great

    I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!

    The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works.  Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up.  Try them again. 
    Google your particular isp, and ipad and many times you will find the exact settings needed for your isp.  Or tell us here, and soneone else may be on the same isp.  Some mail services need you to change a port, or have a unique name for the outgoing server.  
    Kep trying.

  • When I was talking on phone, suddenly the phone was switched off. i tried to switch it on but it gave the message....connect to itunes for set up.  when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it

    when I was talking on phone, suddenly the phone was switched off.
    i tried to switch it on but it gave the message....connect to itunes for set up.
    when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it to factory settings. It also said while restoring ypu will lose all media data but you can restore the contacts.
    I restored the factory settings....the phone was on recovery mode...it was verified by itunes and all that..but in the end it again said that iphone has some problem and can not function right now.
    after that when ever i connect it with itunes, it gives the message, it can not activate the iphone further, try again later or contact customer service.
    What to do now?????? Customer service people say..it is hardware problem

    If it's a hardware problem, then the phone will need to be replaced.
    There is no magic that can fix a hardware problem.

  • FM/Class to find the class and characterstics for a given material

    Hi All,
    Is there any Class/FM to find the class and characterstics for a given material.I tried some BAPI_OBJCL* BAPI's but lot of the BAPI's need classnum as input parameter. But i need a BAPI or tables or class which can give the class and its characterstic values for a given material.

    Hi Ben
             Try ..
    BAPI_OBJCL_GETCLASSES
    BAPI_OBJCL_CREATE

  • Stock report warehouse wise for a particular batch

    Hi all,
    How do you find out a stock report warehouse wise for a particular batch along with the same batch items sold to whom and with what quantity?
    Thanks
    SV Reddy

    Hi SV Reddy
    pls find the query for stock report
    Select X.DocDate, X.ItemCode,
    ((Select isnull(sum(InQty-OutQty),'0')From OINM T0 Where T0.ItemCode=X.ItemCode  And
    (T0.DataSource='I' or T0.DataSource='N')  And T0.DocDate < X.DocDate)) As [OpeningStock],
    IsNull(sum(X.InQty),0)As[Received Qty],IsNull(sum(X.OutQty),0)As[Consumed Qty],
    ((Select isnull(sum(InQty-OutQty),'0')From OINM T0 Where T0.ItemCode=X.ItemCode  And
    (T0.DataSource='I' or T0.DataSource='N')  And T0.DocDate < X.DocDate)+
    (Select isNULL(sum(T0.InQty),'0')From OINM T0 Where T0.ItemCode=X.ItemCode And T0.DocDate<=X.DocDate And
    (T0.DataSource='I' or T0.DataSource='N')  And T0.DocDate = X.DocDate)-
    (Select isNULL(sum(T0.OutQty),'0')From OINM T0 Where T0.ItemCode=X.ItemCode And T0.DocDate<=X.DocDate And
    (T0.DataSource='I' or T0.DataSource='N')  And T0.DocDate = X.DocDate))As [ClosingStock]
    FROM OINM X Where ItemCode=X.ItemCode And
    (X.DataSource='I' or X.DataSource='N')
    Group by X.DocDate,X.ItemCode
    Order by X.DocDate
    regards
    Jenny

  • I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords but it does not work for the macbook.

    I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords several times but it does not work for the macbook.

    You will have to provide the correct password to delete the existing account, if you have tried but are not getting the password reset email, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

  • Prompt for setting Top N

    I have a report to list top N sources of data. For my report, I have 12 prompt fields excluding the prompt for setting the top N value. The report is working fine with the 12 prompts some of which are constrained. All the prompts have "All Choices" as default values. The moment I add the prompt for the top N, the constrained prompts do not show any value in the drop-down. To provide a little more perspective, this is what I have done to create the top N prompt:
    Used any random field and then changed the fx with hard value 1. Selected "Edit Box" for the control. The specific value has been set to 5. Using a presentation variable.
    However, if I add this prompt with its own "Go" button, then I do not see the issue described above. I would not like to have 2 "Go" buttons.
    Please let me know what I am missing here to make it work.
    Thanks.
    Bhusan

    As you said, 'All the prompts have "All Choices" ', this is one of the requirement's for the constrain to work. I believe that to get the constrain values, you might have used a SQL query
    and you are getting the values. In that case, as per my knowledge, you cannot constrain a dashboard prompt when you are using SQL Results.
    Constrained columns will be constrained by all other columns in the prompt. For example, if the prompt contains columns Year, Region, and District, and Constrain is checked for District, the values shown in District will be limited by the values entered in Region and Year.
    Thanks,
    Chandu.

Maybe you are looking for