Charge Account Is Not Copied From PR to PO When Created From PR to RFQ to Quotation to PO

Hi,
We are using Autocreate functionality (Forms) for creating PO.
Now when we create PO directly from PR, distribution account gets copied correctly from PR, but when when we create PR>>RFQ>>Quotation>>PO , it takes from Inventory org material account.
I want to use the same account from PR to be copied into PO.
Please Advise,
Thanks Nikhil

You may find the following links to be helpful
Incorrect PO Accrual Account when PO is created from a Purchase Requisition (Doc ID 1136853.1)
How to Set Up and Use Category-based Account Default in Purchasing (Doc ID 293046.1)
How To Diagnose Issues In Autocreate (CREATEPO) Workflow (Doc ID 559009.1)

Similar Messages

Account assignment not copied from header to item level.

Dear All
I have entered WBS in sales order header level account assignment field. In development and in quality server it is getting copied to header to item level. But in production server it is not getting copied.
What could be the reason. KIndly guide me.
Shobana

Please confirm your data transfer routine (copy control) in your production system. If its working fine in quality system then it should work in production as well.
Regds
Jess

G/L Accounts are not copied

Hi Experts,
I created a new company code and it is copied from 1000.
But the G/L Accounts are not copied from 1000 to new company code.
i want to copy the existing G/L Accounts.
Please guide me.
Ramireddy

Hi
Although you would ask it in FI forums, have you used the tcode OBY2 without the test flag to copy GL acc. from one company to the other? Remember that in destiny company must not have any account,
Regards
Eduardo
I copy the info from documentation in IMG:
Copy Company Code
In this activity you can copy G/L accounts from one company code to another.
Requirements
No G/L accounts may exist in the target company code.
The chart of accounts for the target company code must be a copy of the source company code's chart of accounts.
Note
If no master data exists for G/L accounts in the chart of accounts area in the target company code, the system copies the master data from the source company code's chart of accounts.
Activities
Enter a target company code in the Company code field. In the Copy from company code field, enter the company code you want to copy.
Edited by: E_Hinojosa on Oct 27, 2011 3:35 PM

Unloading point is not copied from PR -PO,when i change account assignment

Hi All,
unloading point is not copied from PR -PO,when i change account assignment from 'K' to 'F' in PO. unloading point field should be in display for both 'K' & 'F' Account assignment category in SPRO because we r using this field to acknowledge my thirty party planning system.
Thanks in advance
Vengal Rao

Have a look at SAP note <a href="https://service.sap.com/sap/support/notes/734273">734273</a>

AP Credit Note copied from AP Reserve Invoice

Hi all
AP Credit Note copied from AP Reserve Invoice cannot be posted with missing G/L account error.
This is similar to error posting AP Reserve Invoice and fixed by SBO version 9 patch 10 in SAP Note 1893780.
Now the error when posting AP Reserve Invoice is solved but cannot post when copied AP Reserve Invoice to AP Credit Note.
Kedalene

Hi
Please see error message.

Letter of Credit not copying from Quotation to Sales order

Hello,
I have attached a LC to a Quotation. When i am making an order with reference to the Quotation, the LC is not copying from Quotation to the Sales order. Kindly help.
Regards,
Shahzad

Hi,
Did you want to say that you have maintain some text in quotation and that text is not copying to the sales order some thing like that?
So I suggest you to check your setting by going to the following Tcodes.
VOTXN over there you can define the text types.
And you have to assign you text determination procedure to the order also.
If you want that text to be copied to the billing also then assign the procedure to the billing doc.
If you have assigned properly your procedure then it will copy the document.
Regards
Raj.

Item 000002 is not copied from the reference document

Dear All,
I am facing a typical problem while creating Price difference sales order w.r.t. invoice.
Document types in the system are -
Z2FC - Normal Sales order type, ZPD - Price change order type, Z2FB - Normal invoice type
My item category determination is -
Doc. type - Itm cat. gp. - Usage - Hghr itm cat - Default itm cat. - Manual itm. cat.
ZPD         -   NORM         - blank   - blank           - G2N                  - L2N
ZPD         -   NORM         - blank   - G2N            - G2N                  - L2N
Z2FC       -   NORM         - blank   - Blank           - TAN                  - TAP
Z2FC       -   NORM         - blank   - TAN            - TANN                - TAN
Copy control is -
Z2FB to ZPD for item category TAN with proposed item categories are G2N and L2N.
Z2FB to ZPD for item category TANN u2013 requirement 302 [Do not copy item]
During my Z2FC sales order creation I was having line items as follows
Item no. - Mat. code     - Qty -      Higher level item - Item category - Amount
10         - 101329          - 3     -      blank                 - TAN                - 35,000.00
20         - MC091234    - 3     -      10                      - TANN             - 0
30         - MC091234    - 1     -      10                      - TAN                - 5000
We are not using the sales BOM. I need to provide line 20 free to the customer. Hence I have manually maintained 10 in the higher level item column for the line item 20. The item category determined was TAN. Then I had changed it to TANN manually. So the amount became zero. Line 20 became the child and line 10 became parent.
At the same time customer also wishes to buy the material code MC091234. Now the material code MC091234 is of HALB type where as the material code 101329 is of FERT type. There is validation in the system that only FERT type of material could be sold and HALB type of material could be supplied as free. [With item category TANN]. In case HALB type material is also required to be sold then I need to manually maintained value in the higher level item. So I had maintained the value 10 in the higher level item column for the line item 30. The default item category determined is TAN. The invoice is also created properly. [Z2FB type]
But when I am creating the invoice correction document type ZPD w.r.t. Z2FB type invoice, I am able to get the two line items for the material code 101329 in line item 10. One each for G2N and L2N item category.
But for the material code MC091234 in line item 30, I get only one line item with item category G2N. I did not get another line item for the material code MC091234 for the corresponding L2N type item category
At the same time following messages are displayed
Message no. V1475 Item category for item 000002 cannot be determined and
Message no. V1476 Item 000002 is not copied from the reference document
Please help.
Thanks in advance
Piyush Ranpura

Dear All,
Any help???
Yet my issue is unresolved.
Thanks & Regards
Piyush Ranpura

" VL 476: Item 'Official Doc. Number' is not copied from the reference doc"

Hi Guys,
When I am doing the Accrual Reversal in F.81 I am getting the following error
" VL 476: Item 'Official Doc. Number' is not copied from the reference document ".
I have maintained the number ranges also. I am not able to understand why the system is issuing this error.
Pls suggest.
Thanks
Srikanth

Hi Guys,
Can anyone please help on this error.
Thanks
Srikanth

Text is not copied from Customer masterdata to sales document header

Hi Friends,
Text was maintained in customer masterdata, that should be copied in to sales order header. In Quality server its working as per requirement. But in production its not copied from customer master data.
Same configuration settings are in production as well as quality(VOTXN)
Please suggest me regarding this

Hi Durga,
Please go to SD> Basic function > text control> Define and Assign Text Determination Procedures and in that screen, check the customer sales and distribution change view customer sales text and sales note for customer and its assignment .
I hope these will be helpful for you.
Regards,

Discount pricing is not copied from Qoutation to Sales order.

Hi All,
Issue:
Discount pricing is not copied from Qoutation to Sales order.
Please suggest the correct copy control/Routine programs which i can check to proceed furthur.
Points will be rewarded.
Regards,
neslin.

kindly check in the price determination whether you have assigned the quotation document pricing type ? simmilar like the sales order type you have assigned ?

PO number not copied from Contract to Sales order

Hi Gurus,
when i try to create a sales order w.r.t a contract the Po number is not copying from cintract to sales order.
also the PO item is not copying from contract to sales orde.
Could u tell me the reason.
Cheers,
Sumith

Hi Sumith,
I'm not sure though but try this one this might jus help.
Go to VTAA,
select the target & Source doc type.
Go to header and check the COMPLETE REFERENCE CHECK BOX,
Which says it copies the whole of the reference doc from the
source doc to the target doc.
I jus hope this will sole your problem.
Cheers!!
Nitin

Pricing not copied from qoutation to Sales Order.

Hi All,
Issue:
Discount pricing is not copied from Qoutation to Sales order.
Please suggest the correct copy control/Routine programs which i can check to proceed furthur.
Points will be rewarded.
Regards,
neslin.

kindly check in the price determination whether you have assigned the quotation document pricing type ? simmilar like the sales order type you have assigned ?

Price not copying from contract to maintenance order in IW31

Hi Gurus,
I am facing issue in one of the client where Price is not copying from contract to maintenance order in IW31. But while doing the same in another client it is working fine.
I did not find the settings for this change. Can any one please help me for which settings price is not copying to IW31 transaction?
Thanks in advance!
Best regards,
Karun Kumar

hi
i think if you have assinged the contract the servies will not copied ,for this in the external tab select the serice selectionbutton ,here specify the agreement from their select the serives you required
regards
thyagarajan

Net weight of the material is not copying from contract to sales order

net weight of the material is not copying from contract to sales order?
plz help me

Hi,
If the *CONDITION VALUES* are *manually* entered then the values will not be copied from the *SOURCE TO TARGET* document
Please check in the Contract whether the vales derived from Condition records are entered manually.
If you want the prices to be copied automatically then they have to maintained through CONDITION RECORDS in *VK11*.
Please maintain the CONDITION RECORDS and check whether they have copied or not
Please also cehck the COPY CONTROLS from CONTRACT to SALES ORDER in VTAA transaction -- at item--->pricing type. and set it a s D
Please check the above settings and let forum know the feedback.
regards,
santosh

Shipment category not copied from deliveries because none exist

Dear Gurus,
Can u please let me know what this 2 errors means:
1) Shipment category not copied from deliveries because none exist
2) Shipping material not copied as means of transport not unique
The above two warning message are getting from Inbound IDOC. its strange, First time I have seen u201C SHIPMENT CATEGORYu201D
Appreciate your supportu2026thanks
Rgds,
Shafiq

Hi Eric, can you please tell me how you resolved the issue. I am having the same problem and i don't know whether the fact that I can't map back to the IDOC that created the SHIPMENT, if it related to this error message or not.

Charge Account Is Not Copied From PR to PO When Created From PR to RFQ to Quotation to PO

Similar Messages

Maybe you are looking for