Charge on 2.2.1 and some issues that I found.

After I bought my charge and my daughters LG revolution on the SAME day my daughters phone was updated that day to 2.2.3 (Gingerbread)  while my phone is running an OS lower than I had on my Droid 1.  Now this bothers me as the 2.2.2 updates some issues that were found in 2.2.1.  What I dont understand is 2.2.2 has been OTA for a at least 5 months maybe more and I am confused?  What has been frustrating is I used my Droid 1 for 2 years NEVER had major issues like dropped calls or the BT not connecting.  I changed phones because the DROID 1 will no longer be getting updates which concerns me if issues were found in current OS that is has will not be updated. 
I am also concerned with this phone ringer going silent, I have not changed any default settings meaning the ringers and notifications are all the same.  I used this phone for work as well for personal  and the other night I missed 3 important calls because the ring tone for calls was silent.  Thinking that I may have turned down the volume to low I pushed the vol up button and low and behold the volume was maxed out.  I checked the ring tone for the calls and found it was on "silent"  I was shall we say upset. 
I also now notice that I only have email running on this phone and nothing else, I dont have apps running like most people and my battery dies at the drop of a hat.  For instance the other day after letting the battery completely die to the point the phone turned off.  I hooked the phone up to the wall charger and let charge for about 8 hours.  I fully expected the phone to stayed charged for at least that amount of time.  I took off at 9 am and by 2:30 - 3 the phone was screaming at me to put on the charger.  My Droid 1 would go a day and half with out needing a charge, day and half. 

Here is something I found by accident.  Let's say you are on the home page or elsewhere and you either purposely or accidentally press the down volume button (left side of phone) and it goes down to zero volume as in silent mode.
In the charge that resets the ringer volume to zero volume and puts checkmark in the SETTINGS>SOUND SETTINGS> SILENT MODE until you either go there and uncheck it OR again press the up volume button on the left side of the phone to raise the volume from zero.
My point is, just like I did, you may have done it yourself.  I do hope that is the case because it's so easy to fix.
OTOH, it does make it easy to silence your phone if you're in a movie, Doctor's office or so forth.
JerryF 

Similar Messages

  • Hello.  I recently pieced together a late 2008 MacBook Pro 15".  Everything works fine except the battery constantly goes between "not charging" and "calculating" or, rarely "charging". It does charge after a long while and will report that it is charged.

    Hello.  I recently pieced together a late 2008 MacBook Pro 15".  Everything works fine except the battery constantly goes between "not charging" and "calculating" or, rarely "charging". It does charge after a long while and will report that it is charged.
    I have reset the NVRAM and the SMC a couple of time but that didn't work so I ran an Apple Hardware Test and while testing the logic board it gives the following error:
    4SNS/1/40000000 LB1T
    I've done some research and found this is a temperature sensor related to the battery, but cannot find where the sensor is located in the computer.  Would you know how I can find the sensor to test it?  Could my battery problem be related to something else?  Would a fresh install of Lion help?
    Thank you!
    Mike
    Two pieces of information that may or may not b helpful, the hard drive is from my early 2008 MBP and the only test disc I have access to is from an iMac.

    Why do you have LION installed on that older machine?
    So you say you built a macbook from a bucket of parts eh?   Kudos
    heres a pic of the battery temp sensor

  • Heey guys whats up listen i have a problem i lost my iphone and it has all my pic's and some information that i really really need it what should i do .... is there any way that i can get back the i phone ??? please help me

    heey guys whats up listen i have a problem i lost my iphone and it has all my pic's and some information that i really really need it what should i do .... is there any way that i can get back the i phone ??? please help me

    You can look for it.
    If you find it, you will have it back.
    If you had find my iphone activated on the iphone BEFORE it was lost, then you may be able to track it.

  • Bought an iPhone 4S through online store. Some said that it's international warranty and some say that it's only local warranty. So which is it? International or Local? Sorry if this is a repost.

    Bought an iPhone 4S through online store. Some said that it's international warranty and some say that it's only local warranty. So which is it? International or Local? Sorry if this is a repost.

    The warranty is valid only in the country in which it was originally intended for sale by Apple.  The only exception is the EU, where the warranty is valid anywhere in the EU (as long as the phone was originally meant for sale there). 

  • I have a macbook pro with OSX Mavericks 10.9.5 and some keys that are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys.  What's really weird is that happens randomly.  I've never spilled anything on it

    I have a macbook pro with OSX Mavericks 10.9.5 and some keys randomly are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys.  What's really weird is that happens randomly.  I've never spilled anything on it, and I can't for the life of me figure out how to fix this.  Can anyone help?  of course this happened after my warranty expired.

    **update**
    I don't know if this will help someone but I am posting this for that purpose.  In the past when I first had this problem, I'd read a post somewhere (sorry, long ago, don't have the link) where an individual was having the same problem and they stated that when the MBP got heated, that's when the keys would stop working, and they went into the MBP and jiggle some stuff around (a specific wire, I'm not electronically inclined so I know NOT of what they spake!).  Well I didn't want to do that but it always stuck in the back of my mind.  I had given up, really, and was planning to take my MBP to the apple store.  But by chance one night I left my MBP on the floor where it's cool, and when I turned it on, the problem went - poof! It seems there was some validity to the post that spoke about heat, because my problems started when I would stream foreign dramas on my MBP for hours at night, and I would hear the fan going off all the time, and in the mornings, my "p", "enter", "0", ";", and all the function keys would stop working. 
    So, maybe try keeping the MBP in a cool place when it's off.  Since I've started doing this overnight every night (keeping it on the cool floor, out of reach of any big feet), I have not had a single problem with my keyboard.
    Hopefully this might help someone.

  • Some issues that I'm having with the iPhone 3G

    Just bought a 3G iPhone and there are two issues that I am having with it that I was wondering if someone could help me with.
    First, when I am listening to music with the apple headphones and I turn the volume to zero, I can still hear the music. It's really quiet, but it's there. Is this normal?
    Secondly, there appears to be a red smudge on the phone's screen, below the glass. Do you think Apple would let me get a replacement phone? It's hard to see unless you are in the sun, then it's visible.
    Thanks!

    Look through these articles. 
    How to report a problem with your iTunes Store purchase:  http://support.apple.com/kb/HT1933
    iOS: Troubleshooting applications purchased from the App Store: http://support.apple.com/kb/ts1702

  • FTP - How to be accessed by external internet and some issues

    Hi there everyone!
    I am looking foward to set up an FTP server on my Mac Pro. It's purposed for my digital photos I take of much of my friends, and personally don't like websites for such hosting. (Yes, copy pasting into a folder is so lazy )
    So starting the FTP was indeed easy. Thanks to Mac OS X technologies. (And Apple too)
    But I've tried connecting to my own FTP, and wasen't sure how to do it exactly.
    It appears I just can't browse it like a normal web page (through FireFox and Safari), so I though of connecting with the Finder, but it showed me this error:
    (It asked for my username and password, which I didn't knew, so simply hit enter, then showed me:)
    The Finder cannot complete the operation because some data in "ftp://127.0.0.1" could not be read or written.
    (Firefox returned me an error: "503 User anonymous unknown" and safari... well went opening that very same page inside firefox!)
    Searching within the help, I couldn't find my answer and came here.
    Also, I was wondering which folder was acting as the ftp folder? And were can I setup this?
    I have also these basic problem with Personal Web Sharing (which could be useful for my project) but that's something different.
    I understand I am asking quite much stuff here, but my search on the internet did not answered me. If you have any article that could be useful, I'd thank you if you could drop a line or two! Thanks in advance for help!

    I have maybe found a way to setup some sort of FTP account, since I think it works with user accounts on the same computer (right?).
    Could anyone have a quick glimpse a this tutorial page and tell me if that's the good way to setup an ftp account?
    In my case I'll need 2 accounts, one which people will read from, and another they will be able to write on. I'll use these two accounts with people I know and that asked my access to my pictures.
    Thanks again in advance for help!

  • Some issues while testing EJB3 API

    I'm running some EJB3 peristence test outside standalone and I'm running
    into some issues that I did not see running the same code against the
    Hibernate EntityManager implementation.
    I'm currently using the Kodo 4.0EA3 download. Any help is appreciated.
    I have the following table:
    Table "public.beers"
    Column | Type | Modifiers
    id | integer | not null
    brand | character varying(50) |
    price | numeric(15,2) |
    Indexes:
    "beers_pkey" PRIMARY KEY, btree (id)
    With the following class:
    package com.springdeveloper.model;
    import javax.persistence.*;
    import java.io.Serializable;
    @Entity
    @Table(name="BEERS")
    public class Beer implements Serializable {
    private Long id;
    private String brand;
    private Double price;
    public Beer() {
    public Beer(Long id) {
    this.id = id;
    @Id(generate=GeneratorType.AUTO)
    @Column(name="ID", nullable=false)
    public Long getId() {
    return id;
    public void setId(Long id) {
    this.id = id;
    public String getBrand() {
    return brand;
    public void setBrand(String brand) {
    this.brand = brand;
    public Double getPrice() {
    return price;
    public void setPrice(Double price) {
    this.price = price;
    public String toString() {
    return "[" + id + "] " + brand + " " + price;
    Issues:
    =======
    1) If I don't have a column named type I get an error -
    Exception in thread "main" <2|false|4.0.0EA3> kodo.util.StoreException:
    ERROR: column t0.type does not exist {prepstmnt 14211340 SELECT t0.ID,
    t0.TYPE, t0.brand, t0.price FROM BEERS t0 WHERE (t0.ID = ?) [reused=0]}
    [code=0, state=42703]
    Any way around this since there is no inheritance structure involved?
    2) If I don't specify a fully qualified name for the first query I get
    this error:
    33 INFO [main] kodo.Runtime - Starting Kodo 4.0.0EA3
    74 DEBUG [main] kodo.Runtime - License capabilities: "Kodo Standard
    Edition,Kodo Community Edition,Kodo Evaluation Edition,Datacache Plug-
    in,Custom Result Object Providers,Custom Mappings,Enterprise
    Databases,Query Extensions,Performance Pack,Statement Batching,Kodo
    Enterprise Edition,Managed Environment,Developer Tools,Custom
    DBDictionaries" Expiration: "11/22/05 7:00 PM" Maintenance expiration:
    "11/22/05 7:00 PM"
    496 INFO [main] kodo.jdbc.JDBC - Using dictionary class
    "kodo.jdbc.sql.PostgresDictionary".
    1007 INFO [main] kodo.MetaData - Found 3 classes with metadata in 0
    milliseconds.
    Exception in thread "main" <4|false|4.0.0EA3>
    kodo.persistence.ArgumentException: Could not resolve entity named "Beer".
         at kodo.query.ejbql.EJBQLParser.populate(EJBQLParser.java:61)
         at kodo.query.ExpressionStoreQuery.populateFromCompilation
    (ExpressionStoreQuery.java:129)
         at kodo.query.QueryImpl.compileForCompilation(QueryImpl.java:682)
         at kodo.query.QueryImpl.compileForExecutor(QueryImpl.java:713)
         at kodo.query.QueryImpl.getOperation(QueryImpl.java:1624)
         at kodo.query.DelegatingQuery.getOperation(DelegatingQuery.java:136)
         at kodo.persistence.QueryImpl.execute(QueryImpl.java:231)
         at kodo.persistence.QueryImpl.getSingleResult(QueryImpl.java:258)
         at KodoTest.main(KodoTest.java:16)
    If I specify a fully qualified name for the EJBQL the first time I query
    then I can just use 'Beer' in subsequent queries. It doesn't help to
    specify '@Entity(name="Beer")' in the persistent class either.
    Here is my query:
    EntityManager em = emf.createEntityManager();
    em.getTransaction().begin();
    Beer b = (Beer)em.createQuery(
    "select object(o) from Beer o where o.id = :id")
    .setParameter("id", new Long(2))
    .getSingleResult();
    System.out.println("Beer: " + b);
    em.getTransaction().commit();
    This works but is kind of ugly:
    Beer b = (Beer)em.createQuery(
    "select object(o) from com.springdeveloper.model.Beer o where
    o.id = :id")
    .setParameter("id", new Long(2))
    .getSingleResult();
    And here is my peristence.xml:
    <?xml version="1.0"?>
    <entity-manager>
    <name>BeerDistributor</name>
    <provider>kodo.persistence.PersistenceProviderImpl</provider>
         <properties>
              <!--
              To evaluate or purchase a license key, visit http://
    www.solarmetric.com
              -->
              <property name="kodo.LicenseKey" value="????-????-????-????-????"/>
    <property name="kodo.PersistentClasses"
    value="com.springdeveloper.model.Beer,
    com.springdeveloper.model.Customer,
    com.springdeveloper.model.Order"/>
    <!--
    Connection configuration.
    -->
              <property name="kodo.ConnectionURL" value="jdbc:postgresql://
    localhost/test"/>
              <property name="kodo.ConnectionDriverName"
    value="org.postgresql.Driver"/>
              <property name="kodo.ConnectionUserName" value="trisberg"/>
              <property name="kodo.ConnectionPassword" value="????"/>
              <!--
              To disable logging, set value to 'none'.
              To use Log4J, configure Log4J appropriately, and set value to
    'log4j'.
              To view trace of all SQL being executed, add 'SQL=TRACE' to value
    below.
              -->
              <property name="kodo.Log" value="DefaultLevel=INFO, Runtime=DEBUG,
    Tool=INFO"/>
         </properties>
    </entity-manager>
    Thanks,
    Thomas Risberg

    1) If I don't have a column named type I get an error -This, unfortunately, is something that we need to clarify in the spec
    itself. Currently, the discriminator value and column for a class have
    default values in the spec. So technically, every base class has a
    discriminator column according to spec defaults.
    Obviously this isn't practical. In fact Kodo already turns off
    automatic discriminator columns for vertical and table-per-class
    inheritance unless you explicitly give a discrimintor value or column.
    So one way to not use a discriminator column in Kodo right now is to set
    your inheritance type to JOINED or TABLE_PER_CLASS. Another way is to
    use Kodo's kodo.persistence.jdbc.DiscriminatorStrategy annotation, which
    allows you to name a non-standard or custom discriminator strategy.
    Setting this annotation's value to "final" (an alias for Kodo's
    kodo.jdbc.meta.strats.NoneDiscriminatorStrategy) will indicate that the
    class doesn't need a discriminator because it won't be extended.
    We will try to get this ironed out in future versions of the spec.
    If I specify a fully qualified name for the EJBQL the first time I query
    then I can just use 'Beer' in subsequent queries. It doesn't help to
    specify '@Entity(name="Beer")' in the persistent class either.This sounds like a bug in our early access implementation. I have a
    feeling it only occurs with property access entities -- if you change
    your entity to use field access (which also means using Kodo
    enhancement), I think you'd see the problem go away. I think it might
    also go away if you performed some other persistence operation on a Beer
    entity (such as a by-id lookup) before attempting the query. We'll make
    sure to have this fixed for our next release. Thanks for the report.

  • High latency and some PL, culprit seems to be a router within comcast

    Hi: I reported this issue to Comcast support but I think I'll post it here too. I'm seeing high latency routing through the Comcast network to a variety of locations. In all endpoints I try, I see high latency except when I hit Comcast endpoints (which makes sense). Here's some output for you: WinMTR outputTraceroute output Note that in all cases, there is a significant slowdown somewhere between hop 9 and 11, always at a comcast router. This issue has been going on for a few hours. Anyone else seeing it?

    Hi: (Not sure of the correct forum for this type of request so I'm reposting here after first posting over here)  I posted a couple days ago with some issues that seem to have returned. Seeing high latency and occasional PL trying to get from my home to a variety of well-known endpoints. WinMTR output. Anyone else seeing the same? Comcast? This is starting to become a thing. Really annoying for those of us who rely on low latency connectivity when working from home!

  • IOS 4.2.1: Intermittent Playback and Static Issue Resolution - JVC KD-AVX77

    Hey guys, it appears that iOS 4.2.1 fixes the issue with the intermittent playback and static issues that I was having in my car. I just played two songs continuously with no issues.
    I have the JVC KD-AVX77, and with iOS 4.1, I was having nothing but problems with music playback. It had got to the point that it was intolerable to use my iPhone in my car.
    I am extremely pleased that it seems like Apple took everyone's feedback about this issue, and came up with a fix to it. Too bad that I've already stored my car for the winter.
    Please post your own findings. I know this issue was across multiple head units and car manufacturers.
    Message was edited by: Ack_

    Same problem here. I have a 3gs and this intermitent static/hiss/lag happens when i connect through the usb on my toyota prius. This problem did not happen before the latest software upgrade. I have switched out the cables. Also tested on an ipod touch without the software upgrade and had no problem. It's a crazy annoying problem! Sounds a bit like listening to vinyl. I have also tried switching to airplane mode, but that didn't do anything. I have also reset the iphone while connected to the usb (the same way i frequently have to because of an earlier problem i've had with the usb failing to work in the car at all...) and that has not fixed it. I'm going to try connecting via bluetooth today and see what happens - i'm guessing that will be fine, but i don't like to listen via bluetooth.

  • Cyrillic font in google and some other sites like Wikipedia are looking different in Win XP and Win 7

    Good day, gents.
    Yesterday I installed 4 beta on my desktop after succesfull using it on laptop. But when i opened google (and some other sites) i found that fonts are looking different with the same settings. Here screens:
    http://i52.tinypic.com/33x78eb.jpg - Laptop, Win XP Professional SP3 (Looks good)
    http://i56.tinypic.com/5nw47l.jpg - Desktop, Win 7 Ultimate (Looks terrible, those Times New Roman makes me mad)
    I tried reinstall, clearing cashe. In Firefox 3.6.9 on Desktop fonts was normal.
    How to resolve this ? Thanks and sorry for my English.

    Disable (remove the check-mark) in<br />
    Tools > Options > Advanced : General: Browsing: "Use hardware acceleration when available"
    See also this mozillaZine Forums threwad.
    Direct2D & DirectWrite HW Acceleration For Minefield - Info: http://forums.mozillazine.org/viewtopic.php?f=23&t=1775755

  • Apple TV 2.3 and sound issues

    The 2.3 update seems to have cured the hang and reboot issues that were introduced in 2.2, BUT now when my TV show audio playback contains sounds like "ssssss", car engines, or white noise, I'm getting a strange oscillation in the audio. It's pretty irritating.
    Anyone else?

    The 2.3 update seems to have cured the hang and reboot issues that were introduced in 2.2, BUT now when my TV show audio playback contains sounds like "ssssss", car engines, or white noise, I'm getting a strange oscillation in the audio. It's pretty irritating.
    Anyone else?

  • IPhone 3g charged for  2hours... and overheating

    I charged my phone as soon as I got home - about 6pm - at about 815pm picked it up to head to the store.... and it was HOT! Tried to make a call and it was overheated.... very hot against my cheek/ear. Felt like my iBook with the battery problems.
    BTW I have a white 16gb phone, for comparison purposes. I got this Saturday and never had the problem before.

    If you have a case try charging with the case off and see if that helps.

  • Using Namoroka x64 some pages that should have a white background are red

    I'm using the beta version of Namoroka x64 and some pages that should have a white background, have a red background. The 32 firefox does not have this issue with the same page.
    Example site: http://www.illinoislottery.com/subsections/History/Win2011.txt
    Trying a txt file on the hard disk gives the same result

    Opening in the side bar is the default for bookmarks that are created via a link or button on a website.<br />
    You can check the Properties of a bookmark via the right-click context menu in the side bar (Ctrl+B; Cmd+B on Mac).<br />
    In the Bookmarks Manager (Bookmarks > Organize Bookmarks) you can click the More button in the Details pane at the bottom right.<br />
    Make sure that "Load this bookmark in the side bar" is not selected.

  • Firefox does not display the basic menu line File Edit View etc. How do I get this menu to show. I have tried uninstalling and reinstalling, but that does not help

    When I ask for help finding bookmarks, the answer tells me to click on bookmarks as shown in the illustration, but there is no such line displayed on my computer.

    '''''"Firefox does not display the basic menu line File Edit View etc."''''': That is the Menu Bar; see below.
    '''<u>Menu Bar</u>''' (File, Edit, View, History, Bookmarks, Tools, Help)<br /> <u>Firefox 3.6.x versions allow the user to hide the Menu Bar.</u><br />
    *Tap the ALT key or the F10 key, Menu Bar will display, click View, click Toolbars, click Menu Bar to place a check mark next to it, '''''OR'''''
    *Press and hold the ALT key while pressing the letters VTM on your keyboard, then release the ALT key
    *See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
    '''<u>Other Toolbars</u>''', see: https://support.mozilla.com/en-US/kb/Back+and+forward+or+other+toolbar+items+are+missing<br />
    '''<u>Status Bar</u>''': click View, click Status Bar to place a check mark<br />
    '''<u>Full Screen Mode</u>''': If you have no Toolbars or Tab Bar: Press F11 (F11 is an on/off toggle). See: http://kb.mozillazine.org/Netbooks#Full_screen<br />
    Also see: http://kb.mozillazine.org/Toolbar_customization_-_Firefox#Restoring_missing_menu_or_other_toolbars
    <br />
    <br />
    '''Other items that need your attention'''
    The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins.<br />
    <br />
    *Adobe PDF Plug-In For Firefox and Netscape
    **Current versions are 9.4.2 and 10.0.1 (aka Reader X)
    **More info about version 10 (aka Reader X)
    ***New Adobe Reader X (version 10) with Protected Mode was released 2010-11-19
    ***See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
    #'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    #'''Update Adobe Reader (PDF plugin):'''
    #*From within your existing Adobe Reader ('''<u>if you have it already installed</u>'''):
    #**Open the Adobe Reader program from your Programs list
    #**Click Help > Check for Updates
    #**Follow the prompts for updating
    #**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
    #*Download complete installer ('''if you do <u>NOT</u> have Adobe Reader installed'''):
    #**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
    #**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
    #**Click "Save to File"; save to your Desktop (so you can find it)
    #**After download completes, close Firefox
    #**Click the installer you just downloaded and allow the install to continue
    #***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
    #**'''<u>Download link</u>''': ftp://ftp.adobe.com/pub/adobe/reader/
    #***Choose your OS
    #***Choose the latest #.x version (example 9.x, for version 9)
    #***Choose the highest number version listed
    #****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
    #***Choose your language
    #***Download the file, SAVE it to your hard drive, when complete, close Firefox, click on the installer you just downloaded and let it install.
    #***Windows: choose the .exe file; Mac: choose the .dmg file
    #*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
    #**''<u>Also see Download link</u>''': http://get.adobe.com/reader/otherversions/
    #**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
    #*After the installation, start Firefox and check your version again.

Maybe you are looking for