Charge status LED bug in new firmware

After updating my 2nd generation iPod shuffle firmware from version 1.0.2 (which it came with) to version 1.0.4, the status LED does not correctly indicate when the battery is fully charged anymore.
According to the manual, the status LED should turn from yellow to green only after the battery has been fully charged, which takes about four hours if the battery was completey depleted. It worked that way with the original firmware.
Now with firmware 1.0.4, the LED turns to green after a little less than 90 minutes of charging the empty battery, which by then obviously isn't full yet. From runtime tests I conducted it seems that the battery has reached about 85% charge at this point.
So if you want to ensure a full charge, ignore the LED and charge the iPod shuffle for at least four hours until Apple fixes this issue.

I went to local Nokia service, and they told me that probably it was wrongly flashed. So I reinstalled firmware two more time, but it always have the same problem. Is there someone with 6300 that have the newest firmware and can test this ?
thank you
I will put this phone to service and see what they will do.

Similar Messages

  • Bug in New Firmware V50.0.005 for Nokia 5800 Xpres...

    Hi I am facing  some bug in new Firmware V50.0.005
    1) In the music library it is not showing any song.(i am having arround 500 songs in memory card)
    2) If i try to refresy the library, it will not complete the process. (i.e. continuesly it will show refreshing and i have manuly stoped after 1 hour). and still no songs in all songs list.
    3)While playing radio it will hang after some time.(After 15 min to half an hour). you have to restart  your phone to close that radio application. (no other go)
    If any Solution is there for this please let me know.
    Thanks in advance
    Ssandesh T S

    For the radio problem, You may have to try to reinstall your firmware, or failing that, you may have to do a reset.
    For the music library:
    1. Connect your 5800 to you PC in Mass Storage Mode
    2. On your PC you will need to have allowed to “Show” hidden files, do this from Explorer/Tools/ Folder Options/ View and select “Show hidden files and Folder”
    3. Open your SD memory card/Removable Disk in My Computer on PC
    4. Go to E:\ Private there you will see 3 folders 101f8857, 101ffca9 and 10281e17 .
    5. Go to Private\101f8857\Cache\E there you will see .dat files. Delete all the .dat file BUT NOT the E Folder. Shown above right
    6. Now go to Private\101ffca9 there you will see another .dat file, Delete the dat file NOT the folder.
    7. Finally go to Private\10281e17 There you should see 4 files 2 are Mp3 files other are Podcast files. Delete mpxv2_2.db & mpxv2_2.db-journal for Mp3 files list and Delete pcv6_1.db & pcv6_1.db-journal for Podcast files list. Shown above right
    8. Close all windows and disconnect your Phone. Go to Music Library and it should automatically start a refresh.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • Bug in new firmware 7.0 for 6300 cannot create per...

    There is bug in new firmware 7.0 for nokia 6300 and maybe all 40 series.
    I am not able to create access point which is necessary to access internet with java applications.
    When I go Settings -> Configuration -> Personal config.sett. -> Add -> Access point (but also if I choose any other from list)
    Then i go back and there is no new access point. In previous version of firmware it created access point.
    Do anyone know about this issue ?
    How can I tell to Nokia support that there is this bug ?
    thanx for replies

    I went to local Nokia service, and they told me that probably it was wrongly flashed. So I reinstalled firmware two more time, but it always have the same problem. Is there someone with 6300 that have the newest firmware and can test this ?
    thank you
    I will put this phone to service and see what they will do.

  • RE1000 WPS BUG - Request New Firmware

    I have noticed that when I turn off WPS in the extender, I can connect to the extender but only for 3 mins, then it connects back to the router. 
    I think we all need a new firmware with this bug fixed.

    I am seeing this issue as well on 3 RE1000 units. We should be able to disable WPS without causing the RE1000 from losing connectivity every 40 seconds or so. The loss of connectivity only lasts about 3 seconds but that is disruptive to the functionality of the extender. I am using hardware version 1.5
    Firmware
    02/13/2012
    Ver.1.0.02 (Build 1)
     Is there an updated firmware to resolve this issue? If not I will have to return these units

  • WRT610N - Bugs and new firmware

    I installed WRT610N under XP (original firmware, no updating), runs well: Internet OK. Storage on 500 Mb Western Digital HD OK, FTP OK, WiFi OK, Media Center OK with PS3 (Twonky work well), DDNS is OK.
    Considering that: FTP a bit sluggish, FTP autentication not possible (should be sorted out by firmware B10 ?!) , People says that with "B10" it is no longer impossible to get to Twonky through port 9000.
    I ask:  anybody can suggest me if it is worthy to upgrade my Firmware with the latest "B15" dated 28th of Luglio ? Anybody knows anything ?
    Moreover: other owners please keep in touch for info sharing, it seems the only way to get knowledge on it.
    Hugs

    The die is cast. I have got it. When I bought it the manufacturer has not told me that USB support is crap. In fact it works, but with some bugs.Considering LinkSys Cisco is a mayor Company, I respect them and I count they sort out understandable bugs by updated firmware.
    The router is also not cheap, therefore they have an obbligation to the consumers even though the post-sales service is prompt but not qualified (sigh). I forgive them because they have sooner or later to atone for their sins.
    I was referring to the forum because the most qualified people who knows where to put hands are the guys like me, and better then me, the one who spend hours to get to the service who has been promised .....(sigh again).
    So, I do not accept (respectfully) Your approach.
    Anyone who likes to co-operate telling me what about latest July the 28th firmware ?
    Hugs

  • New bug in new firmware v4.0707.0.7 for n80

    in most time whene i try to chageing n80 said not charging
    the problem diapear whene i restat my phone and racharg it

    Hi,
    That is very odd.. perhaps u can try updating the software again. The new NSU client 1.3.60 has been launched.
    If the issue persists,then have it checked out at a Nokia service center.
    Cheers
    Let me be a ripple in the silent stream of your memory ~ Viveca

  • Bug in new firmware for Nokia E61

    After upgrading the number shortcuts don't work. For example, on the menu, you were able to access items by pressing a number (1 = left top corner, 2= first row second column, etc). On calcium the numbers don't work. On Opera the number shortcuts don't work. The only way to get them to work is by pressing the blue key and hold it down while pressing the number. I have seen posts on different boards, some people have this bug others don't. I think it is related to upgrades for specific keyboard layouts. My layout is the the one that includes the funny spanish "n" to the right of the spacebar.

    I found another bug after update. The Ctrl + CVX (Copy, Paste, Cut) doesn't work with number fields in the Contacts. I used to copy/paste numbers between contacts and/or between two field types. Copy/paste only works with text fields like FirstName, Email etc.
    The audio quality improved considerably but the volume got reduced noticably. Before the update, one music video I had stored in card used to play real loud, now it is not as loud as it was before. (Not a big deal).
    Updated FW and installed Mail for Exchange 1.3.0. Once configured and running, it sometimes doesn't allow me to change settings. It says - "Mail for Exchange settings page is open. Please exit open settings first". And I don't know which setting page it is referring to.

  • Lenovo 3000 N500 23G Battery Status LED problem.

    I am having problems with the Battery Status LED on my new laptop.  The LED turns blue at around 22-30% charge and the Hardware manual indicates it should be 95%, also the LED remains lit when fully charged on battery power when it should be off. The biggest problem is that I have no idea on when the battery is charged and I should not need to boot into windows to check this.
    I have already returned an identical model to the retailer for the same reason, they did confirm that the unit was faulty and send me another which seems to have the same suspected fault.
    Has any one else have the same problem as me, I am not too sure if I should return the 2nd unit for a refund and look elsewhere?
    I did contact Lenovo support before and was advised to get it repaired under warranty, I did not need to do this as the unit is less than 30 days old and I wouldbe entitled to a refund or replacement.
    Below is an excerpt from the manual I downloaded from this website.
    Thanks, Mark.
    Blue: The battery is charged to 95% or more of its capacity.
    Blinking blue: The battery is being trickle-charged
    Orange: The battery is being normally charged
    Off: The computer is operating on battery power, and the battery has enough power
    Blinking orange: The computer is operating on battery power, and the battery is charged to no more than 8% of capacity.)

    The battery is going to fail on this unit; actually it is a defect in the circuit built into the battery the detects charge level.  It has been happening quite frequently with IBM/Lenovo batteries these days.  If you have warranty left, get the unit in for repair or you will be out of luck like the rest of us who bought these units with failure prone batteries and a poor excuse for product quality.  If you care to help your fellow Lenovo owners, call, email, write, picket, jump up and down, do what ever you have to do to voice your concern and complaint to as high a person as you can at IBM and Lenovo.  We have to keep the heat on at a corporate level at both IBM and Lenovo, to remind them that there is a price to pay for the fact that they do not care about their customers.   

  • What are the bugs in N95 8G new firmware V15?Let'...

    what are the bugs in N95 8G new firmware V15?

    The most important problem in new firmware is in gallery part.After installing new firmware I copy my images in image folder in 8gb hdd.after that every time I go to gallery after 2 or 3 seconds it automatically comes out and I cannot use gallery to view my images .Accroding to some reports I reinstall firmware again but problem still exist.What can I do.

  • Zen Micro New Firmware controlling Usb Charg

    Is there any possibility to create a new firmware (for ZEN MICRO) that offers us to make <B>disable</B> / able <B>usb</B> <B>charging</B>.
    I dont want to <B>charge</B> my player everytime.(because of battery life shorting.)

    There is already an existing thread on this (which I replied to). A second one isn't needed.
    Cat

  • N79 new firmware released. V20.175. Hope no bugs!

    Latest available software for  Nokia N79, product code 0565726
    Version:  20.175
    Hope no bugs!

    hi..
    well i also hoped so for no bugs in this firmware but i think there is still something left over not checked.......
    1. when i sms or call someone after that the E sign under the network is showed as on hold and then gprs connections fail to connect and times out..... affects auto email checking capability
    2. power saver time out still in........ or else remove the option of setting ur own power saver
    3. i think battery life is little lesser as compared to previous firmware v11.049
    4. the menu views - v shaped and horse shoe  -  who uses that ????? 
    ANYONE WITH THE SIMILAR PROBLEMS OR ELSE......... DO SHARE
    thanks

  • New Firmware Fix Cisco bug ID CSCtn23871?

    In the Cisco Security Advisory released on May 25th, it said the firmware to fix CSCtn23871 would be released June 10th. That never happened. But now a firmware version has been released with the 2.0.2.1 version number that was supposed to fix the vulnerabilities from this Security Advisory. Does this new firmware update fix CSCtn23871? There are no release notes for this firmware, which was released 5 days ago.
    Jeff

    Do you know when the release notes will become available for this firmware version? The release notes were updated for the RVS4000.

  • Installed new firmware n95 8gb, installing bug on ...

    Hey Guys
    I bought this phone a year and a half ago and haven't update firmware since then. I am going on vacation tomorrow, so I thought it would be a good idea to update it just in case :/
    First of all, the backup gets stuck on 81 percent... but after I receive a sms it says it's completed. So i get down to installing the new firmwar... 31.0.0.5 and I install it. 
    When I run my phone, it's ok for 1-2 sec and then an installing notification pops-up along with the bar (never ending) and it just stays there... and the phone freezes up and I have to wait like 5 minutes to unlock the keypad because of this... I tried reinstalling the firmware... same problem...
    Any idea what this is and how I can fix it? I am going away on vacation tomorrow and I would really like to have a usable phone :/ Any tips, advice?

    well generally, you have to let it do its thing. it is either memory card or mass memory of your phone that has apps that your phone is trying to index. it is normal and sometimes take a long while depending on how much stuff you actually have on those memories. 
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • Sun Fire X2100  Blinking Status LED...

    We have 3 new Sun Fire X2100 servers at my current job. Just recently the status LED (orange) started blinking. The logs show fine and running a prtdiag shows everything up and running fine. Is there a way to turn off the blinking LED? I have gone over every piece of information I can find and have found nothing about how to turn this off once it has started blinking.

    This may be one of two issues:
    - There's a know ILOM/nge driver bug in eariler releases of S10 x86 (pre 6/06).
    - There's a know issue with an older firmware rev of the BIOS/LOM where the net management port hangs/drops out and triggers the blinking fault LED. Do you know what BIOS revision you are at?
    Most times a mobo swap is NOT the fix. You may be making the problem worse because we have mobos in the supply chain with older firmware revisions.
    On the X2100's I usually have my customers try:
    - Moving the RAM in different slots
    - Updating the BIOS/LOM firmware
    - Running the PC-Check diags
    ... before I send a field tech out to do major surgery.

  • Help! E75 new firmware doesn't work!!

    I upgraded to 201.12.01 firmaware.
    Now I can't make any calls ("call forbidden") and I don't receive any calls.
    Also the phone's menu is very buggy: when I choose smth in the menu I get in the wrong page!
    I made a hard reset. The phone worked well for 2 hours. But when I finished installing all the software - it broke again the same way ((
    What's wrong?? Is there any chance to cancel that new "improving" firmaware?
    How can I get that phone work well??
    PS. It was the last time I bought Nokia phone. I think Nokia can produce only "simple" phone models, but not a smartphone..
    PPS. DO NOT UPGRADE A FIRMWARE IN YOUR PHONE!!!!

    yep i gave the same advice to my friends: do not upgrade the phone. at least until the bugs are fixed.
    We were promised by a new firmware update coming today, my main problem is with my GPS, it keeps hitting me with no connection,like the phone is totally separated from its GPS receiver, it worked just fine before with the v110 firmware, and Nokia  totally removed the satellite status which i found really useful!!!
    this firmware is a real screw up for NOKIA i always loved their phones and updates, hope they fix these issues soon, cause i really loved my e75 

Maybe you are looking for

  • Profit Center design by plant wise

    Hi Experts, My client is having central procurement unit and having 8 branches(warehouses) and they transfer the goods from head office to branch later on for their sale.And the legal requirement here is that cost is same across all warehouses and we

  • Change of user name = new user?

    i 'accidently' changed my username on the left-side of the finder box. but afther restarting, i think it made a new user: i lost all of my settings, my language preferences, my mail-accounts, etc... i managed somehow to reset it, but i think i have a

  • How do you delete Wiki attachments?

    Our /Library/Server/Wiki/FileData folder is about 7 GB, and I noticed that any time Server.app checks Wiki's settings, there's a mds/mdworker process in the background that rips through this folder before Server.app is able to report back. I think th

  • Authorization of goods issue at shop floor.

    Hi PP Gurus, I am mapping the process & get lured into the authorization of goods issue of RAW materials. After MRP run PR are automatically created for RAW materials due to 'control parameters' settings in MRP run screen. Now at the time of Producti

  • DataRepeater Control Item Values

    I have bound a datarepeater control in the usual manner to a sql database table. Rather than typing manually, customers send excel spreadsheets with most of the data required, but not all the data required to satisfy the database table. In this case,