"Charged" icon comes on after turning off and stays on til batt. is dead.i

Sometimes after I turn my iPod off, the charged icon will come on. If left this way it will drain the battery. Also, most times my PC does not recognize my iPod and I have to reset the iPod for iTunes to recognize my Pod is plugged in. It seems to be freezing alot lately, skipping etc. causing me to have to do a reset where sometimes the problems are solved, but always temporarily. Ideas???

Do you mean the "restore" under summary when you plug in your iPod? If so, I have tried this and it usually does fix my problems, but always temporarily. Thanks for your help and/or any more ideas.

Similar Messages

  • No power after turning off and plugging into a new functioning outlet.

    No power after turning off and plugging into a new functioning outlet

    Perhaps corruption of the Energy Saver settings...
    Reset the PRAM cannot hurt.
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    Excerpt from http://support.apple.com/kb/ht1379

  • HT1430 When charging my Ipad mini, it turned off and its still not working, what do i do pls??

    When charging my Ipad mini, it turned off and its still not working, what do i do pls??

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • The browser doesn't start after turning off and turning on the computer

    The browser doesn't start after turning off and turning on the computer. I tried to delete the program entirely (along with personal preferences), create a new account, install a different browser versions. All this did not help. (I have Windows 7.) Help, please! Every day I have to reinstall Firefox!

    Hello Nastena, try a clean re-install, certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you '''remove Firefox program files''' and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!
    * check also if your antivirus or other security software(firewall, antispyware etc) blocks firefox access.
    thank you

  • After turning off and turning on my phone, push notifications resets for all my apps

    After updating to ios 7.0.3, if I turn my phone off then back on, the push notifications prompt resets for all my apps. I have to go back in to apps and allow the apps to send me push notifications. Is there a solution for this or is it a bug?

    http://www.verizonwireless.com/support/knowledge-base-26502/
    Above if battery pull/soft reset doesn't help. If it's boot looped may need new equipment

  • After turning off and then on l7650 i loose the printer network on pc

    i choose not to leave l7650 power on all time every time i power on i have to delite and reinstall printer to print

    I had a similar problem and found that it was because my router would assign a different IP address to the printer each time (using DHCP) and the driver was trying to use the same one that was there when it was installed.  This can be fixed by going into the configuration for the router and reserve a specific IP address for your printer.  That way it will always be the same.  When you install it after that, it will continue to work each time.
    The instructions for your router should tell you how to configure it this way.  It would be different for each one, so I can't describe that.  It probably involves browsing to the router from your PC, logging in and looking for a menu item to configure the wireless setup.  In there will be a way to "reserve" certain IP addresses for certain things on the network.  That is what you are looking for.
    Good Luck!
    I may work for HP, but my comments are always my own!
    If we're lucky and something I say is useful, let me know with kudos! If we're really lucky and it actually solves the issue, then mark it solved! Thanks!

  • Efax 7510 still won't work after turning off/on ePrint several times

    I'm trying to send an eFax over and over after turning off and on the ePrint button under the webservices menu but without any success. The message keeps stating that it's not connected to a network. I am 100% sure that it is connected to my wireless network because I check that out and print a copy of the page stating that this printer is connected.
    What could the problem be? Please help!

    Hi daisyforu,
    Welcome to the HP Support forums.  I understand that you are getting an error message about not being connected when you try to enable the web services for your Photosmart 7510.
    The error message you are receiving is indicating that the printer doesn't have an independent connection the internet.  Please set a static ip address and manual DNS servers by following the steps below.
    1)       Please enter the ip address of the printer into the address bar of your browser (Internet Explorer, Chrome, Firefox, or Safari, etc). My screen shots below are from Safari but the location of everything is the same regardless of the browser.  This will bring up the embedded web server of the printer.
    2)      Please click on the network tab.  You should see the Network Summary for your printer. Please click on 'Networking' on the left hand side menu.
    3)      Please click on 'Network Address (IP)' on the left hand side menu.
    4)      Please on the radial button beside "Manual IP" then click on "Suggest a Manual IP Address" button. The Manual IP address, Manual Subnet Mask and Manual Default Gateway should populate for you.  Please click on radial button beside "Manual DNS Server".  For the Manual Preferred DNS Server please enter 8.8.8.8 and for the Manual Alternate DNS Server please enter 8.8.4.4.
    5)      Please click on 'Apply'.  If you get a warning message about changing the ip address please click 'OK'.
    6)      Please turn the printer off by the printer's power button.  Please wait a minimum of 15 seconds and then turn the printer back on.
    7)      Please press the ePrint icon in the upper left hand corner of the printer's front panel. This should prompt you to accept the terms of service.  Please choose 'Accept'.
    8)      When prompted about the automatic updates please choose 'Yes'. The printer should now show the HP logo while the printer communicates with the HP servers. The Web Services information sheet should print with the claim code for your printer.
    Now that you have the ePrint feature is turned on before using the Fax feature I would recommend that you customize your ePrint email address.  I have included a document here on how to do that.
    You should now be able to get your eFax setup.  I have included a document for you on how to do this here.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Connection automatically turns off and wont turn on.

    I have a blackberry pearl 8130, and a couple of days ago the connection started to turn off and stay off. When I go to manage connections and turn on te mobile network .. it lasts for about 30 seconds and than turns right off again.

    Hi and Welcome to the Forums!
    Is the battery fully charged? Typically, a BB will begin to shut things down as the battery approaches zero charge.
    Also:
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Best!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT201412 My cousin bought iPod touch 5th gen. Then it doesn't turned on. He charge it a charge icon appeared but after 30 mins still off . Is that normal for a brand new iPod touch? Please help me..

    My cousin bought iPod touch 5th gen. Then it doesn't turned on. He charge it a charge icon appeared but after 30 mins still off . Is that normal for a brand new iPod touch? Please help me..

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod      
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    and
    try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My iphone came up with that timing circle and just turned off and did not come back on ? even when i charge it now it still wont turn on ,do you know the problem?

    my iphone came up with that timing circle and just turned off and did not come back on ? even when i charge it now it still wont turn on ,do you know the problem?

    If the battery was empty (and it may then take 10 to 15 minutes of charging before it will respond), then have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

  • 4 hours ago my iphone randomly turned off and now i cant get it to turn back on. Ive tried everything, trying to reset it, charging it but nothing works! the charging symbol doesnt even come up when i plugged in the charger. Please help!

    4 hours ago my iphone randomly turned off and now i cant get it to turn back on. Ive tried everything, trying to reset it, charging it but nothing works! the charging symbol doesnt even come up when i plugged in the charger. Please help!

    Hello there, LaruaGalliers.
    The following Knowledge Base article provides some great troubleshooting steps for your issue:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Particularly:
    Battery does not charge
    Verify that the outlet being used is working.
    Try another USB power adapter if available.
    If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
    Try another USB cable if available.
    iPhone or iPod touch displays the low-battery image and is unresponsive
    If you see the image below, charge the iPhone or iPod touch with USB power adapter for at least 15 minutes.    
    You should see this image when iPhone or iPod touch begins to charge:
    If the screen still displays the low-battery icon, try turning the iPhone or iPod touch off and then on again.
    If the issue persists, follow these troubleshooting steps.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • How do i fix my ipod touch 4th gen when the apple logo appears and then a whit screen comes up and turns off and it wont charge and it wont connect to itunes

    My ipod touch 4th gen is a having a few problems with charging and turning on, my ipod comes up with the  extremely low on power symbol and then i put it into my computer and it comes up with the charging symbol then it goes to the apple logo and then onto a blank white screen and then turns off and repeats that process i have tried various things including resetting my ipod trying to connect it to itunes but it doesnt come up with anything so i cant reset it on itunes and have tried various charging devices.

    Tried it but it won't do anything all it does is make the screen do a very small flash of white and then continues doing the same thing appearing with apple logo then the white screen and off and keeps repeating that
    I'm guessing the white small flash means it's been reset when I hold the 2 buttons down,
    Thanks for suggesting.

  • After updating my IOS to 6, I cannot get my phone to shut off and stay off.  I turn it off and it comes right back on.  Is anyone else having this problem?

    After updating my Iphone 4S to the newest operating system, I cannot get my phone to stay off when I turn it off.  Has anybody got any ideas what to do?

    Hello purplechemist,
    I would be concerned too if my iPhone was not turning off.  I'm not sure if you have tried this, but I recommend first trying to reset your iPhone:
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    You can find the full article here:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If the issue persists after the reset, I recommend restoring your iPhone.  You can find steps for backing up and restoring your iPhone in the following links:
    iOS: How to back up
    http://support.apple.com/kb/HT1766
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it.It is 4 gen running on 4.3.3

    Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it to turn it on .It is 4 gen running on 4.3.3.Please help

    so I have called HP tech support 12 times over the last 6 weeks and still my HP Officejet 4620 loses connection overnight. Of course becasue it was a birthday present I spent more time than I normally would have on this issue. While the tech are very polite they have not fixed my problem and now it is too late to return printer to store. This is a lot of money wasted and I think they need to admit this is a bug in this printer and resolve the problem!!!!!

  • My iPhone 5 keeps turning off and on while charging

    I am trying to restore my iPhone 5, but it keeps turning off and on. It also turns off and on while charging. Is there anyway I can fix this? I did update it to the newest iOS.

    Hi terikins!
    Here is an article that can help you troubleshoot this issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

Maybe you are looking for